- 07 Apr, 2017 1 commit
-
-
Anusha Srivatsa authored
Load GuC 10.56 on GLK. Work on firmware is still in progress. Testing has not been done yet. This patch addresses the initial need to load the GuC firmware for HuC authentication v2: rebased. Cc: Jeff mcgee <jeff.mcgee@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
John Spotswood <john.a.spotswood@intel.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1490905447-15815-1-git-send-email-anusha.srivatsa@intel.com
-
- 06 Apr, 2017 8 commits
-
-
Chris Wilson authored
Many sightings report the greater prevalence of allocation failures. This is all due to the incorrect use of mapping_gfp_constraint(), so remove it in favour of just querying the mapping_gfp_mask() which are the exact gfp_t we wanted in the first place. We still do expect a higher chance of reporting ENOMEM, as that is the intention of using __GFP_NORETRY -- to fail rather than oom after having reclaimed from our bo caches, and having done a direct|kswapd reclaim pass. Reported-by:
Jason Ekstrand <jason.ekstrand@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100594 Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170405221514.23251-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Madhav Chauhan authored
As per BSPEC, valid cdclk values for glk are 79.2, 158.4, 316.8 Mhz. Practically we can achive only 99% of these cdclk values (HW team checking on this). So cdclk should be calculated for the given pixclk as per that otherwise it may lead to screen corruption, explained below: 1. For DSI AUO panel(1920x1200 @60) required pixclk is 157100 KHZ 2. glk_calc_cdclk returns 79200 KHZ for this pixclk, For 2PPC it will be 158400 KHZ 3. Practically 100% of the cdclk can’t be achieved, so 99% of 158400 KHZ = 156816 which is less than the desired pixlclk and causes panel corruption. v2: Rebased to new CDLCK code framework v3: Addressed review comments from Ander/Jani - Add comment in code about 99% usage of CDCLK - Calculate max dot clock as well with 99% limit v4 by Jani: - drop superfluous whitespace change - rewrite code comments to clarify v5: Added details of non-working scenario in commit message Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491397463-13637-1-git-send-email-madhav.chauhan@intel.com
-
Jani Nikula authored
There is some conflation related to sink rates, making this change more complicated than it would otherwise have to be. There are three changes here that are rather difficult to split up: 1) Use the intel_dp->sink_rates array for all DP, not just eDP 1.4. We initialize it from DPCD on eDP 1.4 like before, but generate it based on DP_MAX_LINK_RATE on others. This reduces code complexity when we need to use the sink rates; they are all always in the sink_rates array. 2) Update the sink rate array whenever we read DPCD, and use the information from there. This increases code readability when we need the sink rates. 3) Disentangle fallback rate limiting from sink rates. In the code, the max rate is a dynamic property of the *link*, not of the *sink*. Do the limiting after intersecting the source and sink rates, which are static properties of the devices. This paves the way for follow-up refactoring that I've refrained from doing here to keep this change as simple as it possibly can. v2: introduce use_rate_select and handle non-confirming eDP (Ville) v3: don't clobber cached eDP rates on short pulse (Ville) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
We need the source rates array so often that it makes sense to set it once at init. This reduces function calls when we need the rates, making the code easier to follow. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Rename the function, move it at the top, and reuse in intel_dp_link_rate_index(). If there was a reason in the past to use reverse search order here, there isn't now. The names may be slightly confusing now, but intel_dp_link_rate_index() will go away in follow-up patches. v2: Use name intel_dp_rate_index (Dhinakaran) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
We shouldn't silently use the first element if we can't find the rate we're looking for. Make rate_to_index() more generally useful, and fallback to the first element in the caller, with a big warning. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
I can't think of a real world bug this could cause now, but this will be required in follow-up work. While at it, change the parameter order to be slightly more sensible. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Sagar Arun Kamble authored
i915 is currently doing a full GPU reset at the end of i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This GPU reset clobbers the GuC, causing the suspend request to then fail, leaving the GuC in an undefined state. We need to tell the GuC to suspend before we do the direct intel_gpu_reset(). v2: Commit message update. (Chris, Daniele) Fixes: 1c777c5d ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state") Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.comReviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by:
-
- 05 Apr, 2017 5 commits
-
-
Ville Syrjälä authored
VLV/CHV watermarks are now able to handle the radiation, so mark these platforms as ready for atomic. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170303151928.23053-5-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
VLV/CHV don't have double buffered watermarks so they need to consider the cursor visibility as a special case just like ILK-BDW. Let's use the helper we have for that. Signed-off-by:
-
Ville Syrjälä authored
The VLV/CHV watermark calculation is really interested in the hardware plane type rather than the plane type (which is more of a software concept). Let's check plane->id rather plane->type. No functional changes. Signed-off-by:
-
Michal Wajdeczko authored
Almost all other GuC fw definitions are using GUC|guc prefix. While around, in get_core_family() change explicit WARN into MISSING_CASE as it looks more appropriate, since GuC support capability we are controlling by intel_device_info.has_guc flag. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170404133836.125736-1-michal.wajdeczko@intel.comReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Dhinakaran Pandiyan authored
Noticed this while I was looking at some debug output, [drm:intel_hdmi_compute_config [i915]] picking bpc to 12 for HDMI output [drm:intel_hdmi_compute_config [i915]] forcing pipe bpc to 36 for HDMI I believe the second line should be pipe *bpp* Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
- 04 Apr, 2017 5 commits
-
-
Ville Syrjälä authored
We're clearing the legacy_cursor_update flag before calling drm_atomic_helper_setup_commit() which means the helper will wait for the flip to complete before cleaning up the framebuffers. That's not what we want for the legacy cursor, so let's clear the flag after setting up the commit. Also toss in a FIXME about solving these problems in a nicer way using the fabled vblank workers. v2: Also unsync with legacy page flips Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Rafael Ristovski <rafael.ristovski@gmail.com> Fixes: a5509abd ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW") Signed-off-by:
-
Michal Wajdeczko authored
On last guc/huc cleanup series we've simplified guc init hw function but missed the one for the huc. While here, change its signature as we don't care about huc loading status. Signed-off-by:
-
Chris Wilson authored
If the engine is continually completing nops, we can saturate the signaler and keep it working indefinitely. This angers the NMI watchdog! A good example is to disable semaphores on snb and run igt/gem_exec_nop - the parallel, multi-engine workloads are more than sufficient to hog the CPU, preventing the system from even processing ICMP echo replies. v2: Tvrtko dug into cond_resched() on x86 and found that it only depended upon preempt_count and not tif_need_resched() - which means that we would always call schedule() at that point. Fixes: c81d4613 ("drm/i915: Convert trace-irq to the breadcrumb waiter") Signed-off-by:
-
Chris Wilson authored
If the signal to park arrives before we sleep, then we need to check kthread_should_park() before sleeping to avoid missing the signal. Otherwise, if the signal arrives whilst we are processing completed requests, we will reset the current->state back to TASK_INTERRUPTIBLE and so miss the wakeup. Fixes: fe3288b5 ("drm/i915: Park the breadcrumbs signaler across a GPU reset") Signed-off-by:
-
Tvrtko Ursulin authored
Since this can be triggered by simply attempting a huge object, a WARN_ON is not appropriate. Signed-off-by:
-
- 03 Apr, 2017 3 commits
-
-
Chris Wilson authored
Rather than call intel_engine_cleanup() with a partially constructed engine, unwind the error during intel_init_ring_common(). Signed-off-by:
-
Chris Wilson authored
Or rather it is used only by intel_ring_pin() to extract the drm_i915_private which we can easily pass in. As this is a relatively rare operation, save the space in the struct, and as such it is even break even in the extra code for passing around the parameter: add/remove: 0/0 grow/shrink: 2/3 up/down: 15/-15 (0) function old new delta intel_init_ring_buffer 906 918 +12 execlists_context_pin 1308 1311 +3 mock_engine 407 403 -4 intel_engine_create_ring 367 363 -4 intel_ring_pin 326 319 -7 Total: Before=1261794, After=1261794, chg +0.00% v2: Reorder intel_init_ring_buffer to keep the ring setup together: add/remove: 0/0 grow/shrink: 2/3 up/down: 9/-15 (-6) function old new delta intel_init_ring_buffer 906 912 +6 execlists_context_pin 1308 1311 +3 mock_engine 407 403 -4 intel_engine_create_ring 367 363 -4 intel_ring_pin 326 319 -7 Total: Before=1261794, After=1261788, chg -0.00% Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 31 Mar, 2017 13 commits
-
-
Chris Wilson authored
commit 8490ae20 ("drm/i915: Suppress busy status for engines if wedged") moved the check for inflight requests to the intel_engines_are_idle() check to protect the idle worker. However, the request selftests were also checking the engine idle status and erroring out if they did not become idle within a short period of time after the final wait. In order to accommodate the new check, call retire requests prior to the engine check so that we flush all the waits. Fixes: 8490ae20 ("drm/i915: Suppress busy status for engines if wedged") Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com>
-
Michal Wajdeczko authored
We can rely on compiler to notify us if we miss any case. This approach may also reduce driver size (reported ~4K). Signed-off-by:
-
Paulo Zanoni authored
We don't need to export them since they're not being used outside the file. The next time I try to find the callers for these things I will know I won't need to look outside intel_ddi.c. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Chris Wilson authored
We can merge the pair of loops over the engines and their timelines into a single loop, making it easier to read and more consistent with the commentary. Signed-off-by:
-
Chris Wilson authored
Having added the wait upon each engine to idle into the central i915_gem_wait_for_idle(), we can remove the now redundant wait from reset_all_global_seqno(). This has the advantage of removing the late detection of an error (an engine still busy) which left the seqno reset only partially complete (though it should be safe enough!). Signed-off-by:
-
Chris Wilson authored
Make i915_gem_wait_for_idle() be a little heavier in order to try and guarantee that the GPU is indeed idle (by checking each engine individually is idle, i.e. all writes are complete and the rings stopped) after waiting for in-flight requests to be completed. v2: And return the final error. v3: Break the wait_for() out from under the WARN -- the macro expansion is hideous and unreadable in the warning message v4: If wait_for_engine() fails the result is catastrophic, mark the device as wedged and wait for the repair team. References: https://bugs.freedesktop.org/show_bug.cgi?id=98836Signed-off-by:
-
Chris Wilson authored
As we now distinguish everywhere that can call i915_gem_retire_requests() following a successful wait_for_idle, we can remove the duplication by moving that call into i915_gem_wait_for_idle() itself. Signed-off-by:
-
Michal Wajdeczko authored
There is no reason to separately check for valid fw path before we try to fetch it. Let the fetch function take care of this. Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
This function is no longer used. Its functionality is covered by intel_uc_fini_fw(). Signed-off-by:
-
Michal Wajdeczko authored
Cleanups of uc firmware structs from GuC and Huc are the same for both. Move common code to the helper function to avoid duplication. Signed-off-by:
-
Michal Wajdeczko authored
Some of the DRM_NOTE messages are just using "uC" without specifying which uc they are related to. We can be more user friendly. v2: moved to the header (Joonas) Signed-off-by:
-
Michal Wajdeczko authored
The file fits better. Also use "<invalid>" for invalid case. v2: move directly to .h (Joonas) Signed-off-by:
-
Tamara Diaconita authored
Add description for existing parameter 'pipe' to fix the build warning: ./drivers/gpu/drm/i915/intel_lpe_audio.c:342: warning: No description found for parameter 'pipe'. Signed-off-by:
Tamara Diaconita <diaconita.tamara@gmail.com> Signed-off-by:
-
- 30 Mar, 2017 5 commits
-
-
Chris Wilson authored
If the driver is wedged, HW state may be very inconsistent and report that it is still busy, even though we have stopped using it. This can lead to a double *ERROR* rather than a graceful cleanup after wedging. Signed-off-by:
-
Chris Wilson authored
As we declare an engine as wedged, we mark all of its active requests as in error. However, we don't want to mark successfully completed requests as in error, which requires us to retire those requests first. Signed-off-by:
-
Chris Wilson authored
We pretty print the name of an engine in several places, mostly for debug, but also in the GPU hang report. Using "ring" in the name is archaic (we call those engines now to differentiate them from the multiple rings of commands we execute on each engine), quite verbose and often tautological. We run out of room in our GPU hang report for instance if we have more than a couple of engines hung simultaneously. Bit the bullet and update the strings to reflect the common internal names. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170330134820.12273-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Michał Winiarski pointed out that the debugging infrastructure (such as trace_dma_fence_release) likes to pretty print the timeline name, long after we have freed the timeline. Our timelines currently live as part of the GTT (due to the strict ordering we currently use through each) which belong to the context. We aim to free the context and release its hardware resources as soon as we able to (i.e. when the last fence/request using it has been signaled and retired). As the .get_timeline_name is purely a debug feature, rather than extending the lifetime of the context, or splitting it into many different release phases just to keep the name around, replace the timeline name with a constant after the fence has been signaled. This avoids the potential use-after-free. Reported-by:
Krzysztof Olinski <krzysztof.e.olinski@intel.com> Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com>
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
gvt-next-2017-03-30 - Add mdev attribute group for per-vgpu info - Time slice based vGPU scheduling QoS support (Gao Ping) - Initial KBL support for E3 server (Han Xu) - other misc. Link: http://patchwork.freedesktop.org/patch/msgid/20170330100516.dkavi3rtlsmnoepi@zhen-hp.sh.intel.comSigned-off-by:
-
