- 13 Apr, 2023 19 commits
-
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type via matching individual Completion Queue Entry (CQE) status bits. Fixes: ab46182d ("net/mlx4_en: Support RX XDP metadata") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132893562.340624.12779118462402031248.stgit@firesoulSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type. The veth driver currently only support XDP-hints based on SKB code path. The SKB have lost information about the RSS hash type, by compressing the information down to a single bitfield skb->l4_hash, that only knows if this was a L4 hash value. In preparation for veth, the xdp_rss_hash_type have an L4 indication bit that allow us to return a meaningful L4 indication when working with SKB based packets. Fixes: 306531f0 ("veth: Support RX XDP metadata") Signed-off-by:
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type via mapping table. The mlx5 hardware can also identify and RSS hash IPSEC. This indicate hash includes SPI (Security Parameters Index) as part of IPSEC hash. Extend xdp core enum xdp_rss_hash_type with IPSEC hash type. Fixes: bc8d405b ("net/mlx5e: Support RX XDP metadata") Signed-off-by:
-
Jesper Dangaard Brouer authored
The RSS hash type specifies what portion of packet data NIC hardware used when calculating RSS hash value. The RSS types are focused on Internet traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4 primarily TCP vs UDP, but some hardware supports SCTP. Hardware RSS types are differently encoded for each hardware NIC. Most hardware represent RSS hash type as a number. Determining L3 vs L4 often requires a mapping table as there often isn't a pattern or sorting according to ISO layer. The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that contains both BITs for the L3/L4 types, and combinations to be used by drivers for their mapping tables. The enum xdp_rss_type_bits get exposed to BPF via BTF, and it is up to the BPF-programmer to match using these defines. This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding a pointer value argument for provide the RSS hash type. Change signature for all xmo_rx_hash calls in drivers to make it compile. The RSS type implementations for each driver comes as separate patches. Fixes: 3d76a4d3 ("bpf: XDP metadata RX kfuncs") Signed-off-by:
-
Jesper Dangaard Brouer authored
The tool xdp_hw_metadata can be used by driver developers implementing XDP-hints metadata kfuncs. Remove all bpf_printk calls, as the tool already transfers all the XDP-hints related information via metadata area to AF_XDP userspace process. Add counters for providing remaining information about failure and skipped packet events. Signed-off-by:
-
Liang Chen authored
Commit 1effe8ca ("skbuff: fix coalescing for page_pool fragment recycling") allowed coalescing to proceed with non page pool page and page pool page when @from is cloned, i.e. to->pp_recycle --> false from->pp_recycle --> true skb_cloned(from) --> true However, it actually requires skb_cloned(@from) to hold true until coalescing finishes in this situation. If the other cloned SKB is released while the merging is in process, from_shinfo->nr_frags will be set to 0 toward the end of the function, causing the increment of frag page _refcount to be unexpectedly skipped resulting in inconsistent reference counts. Later when SKB(@to) is released, it frees the page directly even though the page pool page is still in use, leading to use-after-free or double-free errors. So it should be prohibited. The double-free error message below prompted us to investigate: BUG: Bad page state in process swapper/1 pfn:0e0d1 page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x2 pfn:0xe0d1 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000 raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 6.2.0+ Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_pcp_prepare+0x260/0x2f0 free_unref_page+0x20/0x1c0 skb_release_data+0x10b/0x1a0 napi_consume_skb+0x56/0x150 net_rx_action+0xf0/0x350 ? __napi_schedule+0x79/0x90 __do_softirq+0xc8/0x2b1 __irq_exit_rcu+0xb9/0xf0 common_interrupt+0x82/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0xb/0x20 Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool") Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Roman Gushchin authored
For quite some time we were chasing a bug which looked like a sudden permanent failure of networking and mmc on some of our devices. The bug was very sensitive to any software changes and even more to any kernel debug options. Finally we got a setup where the problem was reproducible with CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma: [ 16.992082] ------------[ cut here ]------------ [ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes] [ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900 [ 17.018977] Modules linked in: xxxxx [ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28 [ 17.045345] Hardware name: xxxxx [ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO) [ 17.054322] pc : check_unmap+0x6a0/0x900 [ 17.058243] lr : check_unmap+0x6a0/0x900 [ 17.062163] sp : ffffffc010003c40 [ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c [ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800 [ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8 [ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750 [ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000 [ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010 [ 17.097343] x17: 0000000000000000 x16: 0000000000000000 [ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720 [ 17.107959] x13: 0720072007200720 x12: 0720072007200720 [ 17.113261] x11: 0720072007200720 x10: 0720072007200720 [ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d [ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098 [ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370 [ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000 [ 17.145082] Call trace: [ 17.147524] check_unmap+0x6a0/0x900 [ 17.151091] debug_dma_unmap_page+0x88/0x90 [ 17.155266] gem_rx+0x114/0x2f0 [ 17.158396] macb_poll+0x58/0x100 [ 17.161705] net_rx_action+0x118/0x400 [ 17.165445] __do_softirq+0x138/0x36c [ 17.169100] irq_exit+0x98/0xc0 [ 17.172234] __handle_domain_irq+0x64/0xc0 [ 17.176320] gic_handle_irq+0x5c/0xc0 [ 17.179974] el1_irq+0xb8/0x140 [ 17.183109] xiic_process+0x5c/0xe30 [ 17.186677] irq_thread_fn+0x28/0x90 [ 17.190244] irq_thread+0x208/0x2a0 [ 17.193724] kthread+0x130/0x140 [ 17.196945] ret_from_fork+0x10/0x20 [ 17.200510] ---[ end trace 7240980785f81d6f ]--- [ 237.021490] ------------[ cut here ]------------ [ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b [ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240 [ 237.041802] Modules linked in: xxxxx [ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28 [ 237.068941] Hardware name: xxxxx [ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 237.077900] pc : add_dma_entry+0x214/0x240 [ 237.081986] lr : add_dma_entry+0x214/0x240 [ 237.086072] sp : ffffffc010003c30 [ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00 [ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0 [ 237.099987] x25: 0000000000000002 x24: 0000000000000000 [ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00 [ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600 [ 237.115897] x19: 00000000ffffffef x18: 0000000000000010 [ 237.121201] x17: 0000000000000000 x16: 0000000000000000 [ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720 [ 237.131807] x13: 0720072007200720 x12: 0720072007200720 [ 237.137111] x11: 0720072007200720 x10: 0720072007200720 [ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259 [ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000 [ 237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001 [ 237.158325] x3 : 0000000000000006 x2 : 0000000000000007 [ 237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000 [ 237.168932] Call trace: [ 237.171373] add_dma_entry+0x214/0x240 [ 237.175115] debug_dma_map_page+0xf8/0x120 [ 237.179203] gem_rx_refill+0x190/0x280 [ 237.182942] gem_rx+0x224/0x2f0 [ 237.186075] macb_poll+0x58/0x100 [ 237.189384] net_rx_action+0x118/0x400 [ 237.193125] __do_softirq+0x138/0x36c [ 237.196780] irq_exit+0x98/0xc0 [ 237.199914] __handle_domain_irq+0x64/0xc0 [ 237.204000] gic_handle_irq+0x5c/0xc0 [ 237.207654] el1_irq+0xb8/0x140 [ 237.210789] arch_cpu_idle+0x40/0x200 [ 237.214444] default_idle_call+0x18/0x30 [ 237.218359] do_idle+0x200/0x280 [ 237.221578] cpu_startup_entry+0x20/0x30 [ 237.225493] rest_init+0xe4/0xf0 [ 237.228713] arch_call_rest_init+0xc/0x14 [ 237.232714] start_kernel+0x47c/0x4a8 [ 237.236367] ---[ end trace 7240980785f81d70 ]--- Lars was fast to find an explanation: according to the datasheet bit 2 of the rx buffer descriptor entry has a different meaning in the extended mode: Address [2] of beginning of buffer, or in extended buffer descriptor mode (DMA configuration register [28] = 1), indicates a valid timestamp in the buffer descriptor entry. The macb driver didn't mask this bit while getting an address and it eventually caused a memory corruption and a dma failure. The problem is resolved by explicitly clearing the problematic bit if hw timestamping is used. Fixes: 7b429614 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by:
Roman Gushchin <roman.gushchin@linux.dev> Co-developed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.devSigned-off-by:
-
Xin Long authored
The selftest sctp_vrf needs CONFIG_IP_SCTP set in config when building the kernel, so add it. Fixes: a61bd7b9 ("selftests: add a selftest for sctp vrf") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.comSigned-off-by:
-
Eric Dumazet authored
lena wang reported an issue caused by udpv6_sendmsg() mangling msg->msg_name and msg->msg_namelen, which are later read from ____sys_sendmsg() : /* * If this is sendmmsg() and sending to current destination address was * successful, remember it. */ if (used_address && err >= 0) { used_address->name_len = msg_sys->msg_namelen; if (msg_sys->msg_name) memcpy(&used_address->name, msg_sys->msg_name, used_address->name_len); } udpv6_sendmsg() wants to pretend the remote address family is AF_INET in order to call udp_sendmsg(). A fix would be to modify the address in-place, instead of using a local variable, but this could have other side effects. Instead, restore initial values before we return from udpv6_sendmsg(). Fixes: c71d8ebe ("net: Fix security_socket_sendmsg() bypass problem.") Reported-by:lena wang <lena.wang@mediatek.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.comSigned-off-by:
-
Aaron Conole authored
The netlink message for creating a new datapath takes an array of ports for the PID creation. This shouldn't cause much issue but correct it for future cases where we need to do decode of datapath information that could include the per-cpu PID map. Fixes: 25f16c87 ("selftests: add openvswitch selftest suite") Signed-off-by:
Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: more fixes for 6.3 Patch 1 avoids scheduling the MPTCP worker on a closed socket on some edge cases. It fixes issues that can be visible from v5.11. Patch 2 makes sure the MPTCP worker doesn't try to manipulate disconnected sockets. This is also a fix for an issue that can be visible from v5.11. Patch 3 fixes a NULL pointer dereference when MPTCP FastOpen is used and an early fallback is done. A fix for v6.2. Patch 4 improves the stability of the userspace PM selftest for a subtest added in v6.2. ==================== Link: https://lore.kernel.org/r/20230411-upstream-net-20230411-mptcp-fixes-v1-0-ca540f3ef986@tessares.netSigned-off-by:
-
Matthieu Baerts authored
Simply adding a "sleep" before checking something is usually not a good idea because the time that has been picked can not be enough or too much. The best is to wait for events with a timeout. In this selftest, 'sleep 0.5' is used more than 40 times. It is always used before calling a 'verify_*' function except for this verify_listener_events which has been added later. At the end, using all these 'sleep 0.5' seems to work: the slow CIs don't complain so far. Also because it doesn't take too much time, we can just add two more 'sleep 0.5' to uniform what is done before calling a 'verify_*' function. For the same reasons, we can also delay a bigger refactoring to replace all these 'sleep 0.5' by functions waiting for events instead of waiting for a fix time and hope for the best. Fixes: 6c73008a ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
In case of early fallback to TCP, subflow_syn_recv_sock() deletes the subflow context before returning the newly allocated sock to the caller. The fastopen path does not cope with the above unconditionally dereferencing the subflow context. Fixes: 36b122ba ("mptcp: add subflow_v(4,6)_send_synack()") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
As reported by Christoph, the mptcp protocol can run the worker when the relevant msk socket is in an unexpected state: connect() // incoming reset + fastclose // the mptcp worker is scheduled mptcp_disconnect() // msk is now CLOSED listen() mptcp_worker() Leading to the following splat: divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018 RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004 RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000 R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:262 [inline] __tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline] tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459 mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline] mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705 process_one_work+0x3bd/0x950 kernel/workqueue.c:2390 worker_thread+0x5b/0x610 kernel/workqueue.c:2537 kthread+0x138/0x170 kernel/kthread.c:376 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> This change addresses the issue explicitly checking for bad states before running the mptcp worker. Fixes: e16163b6 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Reported-by:
Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/374Signed-off-by:
-
Paolo Abeni authored
Beyond reducing code duplication this also avoids scheduling the mptcp_worker on a closed socket on some edge scenarios. The addressed issue is actually older than the blamed commit below, but this fix needs it as a pre-requisite. Fixes: ba8f48f7 ("mptcp: introduce mptcp_schedule_work") Cc: stable@vger.kernel.org Signed-off-by:
-
Vladimir Oltean authored
I have observed an issue where the RX direction of the LS1028A ENETC pMAC seems unresponsive. The minimal procedure to reproduce the issue is: 1. Connect ENETC port 0 with a loopback RJ45 cable to one of the Felix switch ports (0). 2. Bring the ports up (MAC Merge layer is not enabled on either end). 3. Send a large quantity of unidirectional (express) traffic from Felix to ENETC. I tried altering frame size and frame count, and it doesn't appear to be specific to either of them, but rather, to the quantity of octets received. Lowering the frame count, the minimum quantity of packets to reproduce relatively consistently seems to be around 37000 frames at 1514 octets (w/o FCS) each. 4. Using ethtool --set-mm, enable the pMAC in the Felix and in the ENETC ports, in both RX and TX directions, and with verification on both ends. 5. Wait for verification to complete on both sides. 6. Configure a traffic class as preemptible on both ends. 7. Send some packets again. The issue is at step 5, where the verification process of ENETC ends (meaning that Felix responds with an SMD-R and ENETC sees the response), but the verification process of Felix never ends (it remains VERIFYING). If step 3 is skipped or if ENETC receives less traffic than approximately that threshold, the test runs all the way through (verification succeeds on both ends, preemptible traffic passes fine). If, between step 4 and 5, the step below is also introduced: 4.1. Disable and re-enable PM0_COMMAND_CONFIG bit RX_EN then again, the sequence of steps runs all the way through, and verification succeeds, even if there was the previous RX traffic injected into ENETC. Traffic sent *by* the ENETC port prior to enabling the MAC Merge layer does not seem to influence the verification result, only received traffic does. The LS1028A manual does not mention any relationship between PM0_COMMAND_CONFIG and MMCSR, and the hardware people don't seem to know for now either. The bit that is toggled to work around the issue is also toggled by enetc_mac_enable(), called from phylink's mac_link_down() and mac_link_up() methods - which is how the workaround was found: verification would work after a link down/up. Fixes: c7b9e808 ("net: enetc: add support for MAC Merge layer") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Xin Long authored
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only checks the pos against the end of the chunk. However, the data left for the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference it as struct sctp_ifwdtsn_skip may cause coverflow. This patch fixes it by checking the pos against "the end of the chunk - sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to sctp_fwdtsn_skip. Fixes: 0fc2ea92 ("sctp: implement validate_ftsn for sctp_stream_interleave") Signed-off-by:
-
Ziyang Xuan authored
Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230 qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230 qrtr_endpoint_post+0xf85/0x11b0 net/qrtr/af_qrtr.c:519 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 __netdev_alloc_skb+0x120/0x7d0 net/core/skbuff.c:630 qrtr_endpoint_post+0xbd/0x11b0 net/qrtr/af_qrtr.c:446 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because that skb->len requires at least sizeof(struct qrtr_ctrl_pkt) in qrtr_tx_resume(). And skb->len equals to size in qrtr_endpoint_post(). But size is less than sizeof(struct qrtr_ctrl_pkt) when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() under the syzbot scenario. This triggers the uninit variable access bug. Add size check when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() to fix the bug. Fixes: 5fdeb0d3 ("net: qrtr: Implement outgoing flow control") Reported-by: syzbot+4436c9630a45820fda76@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=c14607f0963d27d5a3d5f4c8639b500909e43540Suggested-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230410012352.3997823-1-william.xuanziyang@huawei.comSigned-off-by:
-
Martin Willi authored
The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136c ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by:
Martin Willi <martin@strongswan.org> Acked-by:
Guillaume Nault <gnault@redhat.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.orgSigned-off-by:
-
- 12 Apr, 2023 6 commits
-
-
Rob Herring authored
TI CPSW uses of_platform_* functions which are declared in of_platform.h. of_platform.h gets implicitly included by of_device.h, but that is going to be removed soon. Nothing else depends on of_device.h so it can be dropped. of_platform.h also implicitly includes platform_device.h, so add an explicit include for it, too. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harshit Mogalapalli authored
Smatch reports: drivers/net/wwan/iosm/iosm_ipc_pcie.c:298 ipc_pcie_probe() warn: missing unwind goto? When dma_set_mask fails it directly returns without disabling pci device and freeing ipc_pcie. Fix this my calling a correct goto label As dma_set_mask returns either 0 or -EIO, we can use a goto label, as it finally returns -EIO. Add a set_mask_fail goto label which stands consistent with other goto labels in this function.. Fixes: 035e3bef ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled") Reviewed-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
-
Kuniyuki Iwashima authored
With Eric's ref tracker, syzbot finally found a repro for use-after-free in tcp_write_timer_handler() by kernel TCP sockets. [0] If SMC creates a kernel socket in __smc_create(), the kernel socket is supposed to be freed in smc_clcsock_release() by calling sock_release() when we close() the parent SMC socket. However, at the end of smc_clcsock_release(), the kernel socket's sk_state might not be TCP_CLOSE. This means that we have not called inet_csk_destroy_sock() in __tcp_close() and have not stopped the TCP timers. The kernel socket's TCP timers can be fired later, so we need to hold a refcnt for net as we do for MPTCP subflows in mptcp_subflow_create_socket(). [0]: leaked reference. sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108) inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244) __sock_create (net/socket.c:1546) smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284) __sock_create (net/socket.c:1546) __sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661) __x64_sys_socket (net/socket.c:1672) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) ================================================================== BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091 CPU: 0 PID: 18091 Comm: syzrepro Tainted: G W 6.3.0-rc4-01174-gb5d54eb5 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) kasan_report (mm/kasan/report.c:538) tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) tcp_write_timer (./include/linux/spinlock.h:390 net/ipv4/tcp_timer.c:643) call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701) __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2022) run_timer_softirq (kernel/time/timer.c:2037) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) __irq_exit_rcu (kernel/softirq.c:445 kernel/softirq.c:650) irq_exit_rcu (kernel/softirq.c:664) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1107 (discriminator 14)) </IRQ> Fixes: ac713874 ("smc: establish new socket family") Reported-by: syzbot+7e1e1bdb852961150198@syzkaller.appspotmail.com Link: https://lore.kernel.org/netdev/000000000000a3f51805f8bcc43a@google.com/Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Denis Plotnikov authored
Static code analyzer complains to unchecked return value. The result of pci_reset_function() is unchecked. Despite, the issue is on the FLR supported code path and in that case reset can be done with pcie_flr(), the patch uses less invasive approach by adding the result check of pci_reset_function(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 7e2cf4fe ("qlcnic: change driver hardware interface mechanism") Signed-off-by:
Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== iavf: fix racing in VLANs Ahmed Zaki says: This patchset mainly fixes a racing issue in the iavf where the number of VLANs in the vlan_filter_list might be more than the PF limit. To fix that, we get rid of the cvlans and svlans bitmaps and keep all the required info in the list. The second patch adds two new states that are needed so that we keep the VLAN info while the interface goes DOWN: -- DISABLE (notify PF, but keep the filter in the list) -- INACTIVE (dev is DOWN, filter is removed from PF) Finally, the current code keeps each state in a separate bit field, which is error prone. The first patch refactors that by replacing all bits with a single enum. The changes are minimal where each bit change is replaced with the new state value. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: remove active_cvlans and active_svlans bitmaps iavf: refactor VLAN filter states ==================== Link: https://lore.kernel.org/r/20230407210730.3046149-1-anthony.l.nguyen@intel.comSigned-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix not setting Dath Path for broadcast sink - Fix not cleaning up on LE Connection failure - SCO: Fix possible circular locking dependency - L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp} - Fix race condition in hidp_session_thread - btbcm: Fix logic error in forming the board name - btbcm: Fix use after free in btsdio_remove * tag 'for-net-2023-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp} Bluetooth: Set ISO Data Path on broadcast sink Bluetooth: hci_conn: Fix possible UAF Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm bluetooth: btbcm: Fix logic error in forming the board name. Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition Bluetooth: Fix race condition in hidp_session_thread Bluetooth: Fix printing errors if LE Connection times out Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure ==================== Link: https://lore.kernel.org/r/20230410172718.4067798-1-luiz.dentz@gmail.comSigned-off-by:
-
- 11 Apr, 2023 1 commit
-
-
Radu Pirea (OSS) authored
Unregister PTP clock when the driver is removed. Purge the RX and TX skb queues. Fixes: 514def5d ("phy: nxp-c45-tja11xx: add timestamping support") CC: stable@vger.kernel.org # 5.15+ Signed-off-by:
Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230406095904.75456-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by:
-
- 10 Apr, 2023 10 commits
-
-
Luiz Augusto von Dentz authored
Similar to commit d0be8347 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. Cc: stable@kernel.org Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Min Li <lm0963hack@gmail.com>
-
Claudia Draghicescu authored
This patch enables ISO data rx on broadcast sink. Fixes: eca0ae4a ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by:
Claudia Draghicescu <claudia.rosu@nxp.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
This fixes the following trace: ================================================================== BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0 Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31 CPU: 0 PID: 31 Comm: iso-tester Not tainted 6.3.0-rc2-g991aa4a69a47 #4716 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc36 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1d/0x70 print_report+0xce/0x610 ? __virt_addr_valid+0xd4/0x150 ? hci_conn_del+0xba/0x3a0 kasan_report+0xdd/0x110 ? hci_conn_del+0xba/0x3a0 hci_conn_del+0xba/0x3a0 hci_conn_hash_flush+0xf2/0x120 hci_dev_close_sync+0x388/0x920 hci_unregister_dev+0x122/0x260 vhci_release+0x4f/0x90 __fput+0x102/0x430 task_work_run+0xf1/0x160 ? __pfx_task_work_run+0x10/0x10 ? mark_held_locks+0x24/0x90 exit_to_user_mode_prepare+0x170/0x180 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x4e/0x90 entry_SYSCALL_64_after_hwframe+0x70/0xda Fixes: 0f00cd32 ("Bluetooth: Free potentially unfreed SCO connection") Link: https://syzkaller.appspot.com/bug?extid=8bb72f86fc823817bc5d Cc: <stable@vger.kernel.org> Signed-off-by:
-
Luiz Augusto von Dentz authored
This attempts to fix the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc2-g68fcb3a7bf97 #4706 Not tainted ------------------------------------------------------ sco-tester/31 is trying to acquire lock: ffff8880025b8070 (&hdev->lock){+.+.}-{3:3}, at: sco_sock_getsockopt+0x1fc/0xa90 but task is already holding lock: ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_getsockopt+0x104/0xa90 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_sock_nested+0x32/0x80 sco_connect_cfm+0x118/0x4a0 hci_sync_conn_complete_evt+0x1e6/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 -> #1 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock+0x13b/0xcc0 hci_sync_conn_complete_evt+0x1ad/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x18cc/0x3740 lock_acquire+0x151/0x3a0 __mutex_lock+0x13b/0xcc0 sco_sock_getsockopt+0x1fc/0xa90 __sys_getsockopt+0xe9/0x190 __x64_sys_getsockopt+0x5b/0x70 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x70/0xda other info that might help us debug this: Chain exists of: &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by sco-tester/31: #0: ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_getsockopt+0x104/0xa90 Fixes: 248733e8 ("Bluetooth: Allow querying of supported offload codecs over SCO socket") Signed-off-by: -
Luiz Augusto von Dentz authored
This attempts to fix the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc2-g0b93eeba4454 #4703 Not tainted ------------------------------------------------------ kworker/u3:0/46 is trying to acquire lock: ffff888001fd9130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_connect_cfm+0x118/0x4a0 but task is already holding lock: ffffffff831e3340 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_sync_conn_complete_evt+0x1ad/0x3d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock+0x13b/0xcc0 hci_sync_conn_complete_evt+0x1ad/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 -> #1 (&hdev->lock){+.+.}-{3:3}: __mutex_lock+0x13b/0xcc0 sco_sock_connect+0xfc/0x630 __sys_connect+0x197/0x1b0 __x64_sys_connect+0x37/0x50 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x70/0xda -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: __lock_acquire+0x18cc/0x3740 lock_acquire+0x151/0x3a0 lock_sock_nested+0x32/0x80 sco_connect_cfm+0x118/0x4a0 hci_sync_conn_complete_evt+0x1e6/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 other info that might help us debug this: Chain exists of: sk_lock-AF_BLUETOOTH-BTPROTO_SCO --> &hdev->lock --> hci_cb_list_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hci_cb_list_lock); lock(&hdev->lock); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO); *** DEADLOCK *** 4 locks held by kworker/u3:0/46: #0: ffff8880028d1130 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4c0/0x910 #1: ffff8880013dfde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4c0/0x910 #2: ffff8880025d8070 (&hdev->lock){+.+.}-{3:3}, at: hci_sync_conn_complete_evt+0xa6/0x3d0 #3: ffffffffb79e3340 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_sync_conn_complete_evt+0x1ad/0x3d0 Signed-off-by: -
Sasha Finkelstein authored
This patch fixes an incorrect loop exit condition in code that replaces '/' symbols in the board name. There might also be a memory corruption issue here, but it is unlikely to be a real problem. Cc: <stable@vger.kernel.org> Signed-off-by:
Sasha Finkelstein <fnkl.kernel@gmail.com> Signed-off-by:
-
Zheng Wang authored
In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove. Signed-off-by:
Zheng Wang <zyytlz.wz@163.com> Signed-off-by:
-
Min Li authored
There is a potential race condition in hidp_session_thread that may lead to use-after-free. For instance, the timer is active while hidp_del_timer is called in hidp_session_thread(). After hidp_session_put, then 'session' will be freed, causing kernel panic when hidp_idle_timeout is running. The solution is to use del_timer_sync instead of del_timer. Here is the call trace: ? hidp_session_probe+0x780/0x780 call_timer_fn+0x2d/0x1e0 __run_timers.part.0+0x569/0x940 hidp_session_probe+0x780/0x780 call_timer_fn+0x1e0/0x1e0 ktime_get+0x5c/0xf0 lapic_next_deadline+0x2c/0x40 clockevents_program_event+0x205/0x320 run_timer_softirq+0xa9/0x1b0 __do_softirq+0x1b9/0x641 __irq_exit_rcu+0xdc/0x190 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0xa1/0xc0 Cc: stable@vger.kernel.org Signed-off-by:
-
Luiz Augusto von Dentz authored
This fixes errors like bellow when LE Connection times out since that is actually not a controller error: Bluetooth: hci0: Opcode 0x200d failed: -110 Bluetooth: hci0: request failed to create LE connection: err -110 Instead the code shall properly detect if -ETIMEDOUT is returned and send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection. Link: https://github.com/bluez/bluez/issues/340 Fixes: 8e8b92ee ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by:
-
Luiz Augusto von Dentz authored
hci_connect_le_scan_cleanup shall always be invoked to cleanup the states and re-enable passive scanning if necessary, otherwise it may cause the pending action to stay active causing multiple attempts to connect. Fixes: 9b3628d7 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by:
-
- 09 Apr, 2023 3 commits
-
-
David S. Miller authored
Ivan Bornyakov says: ==================== net: fix EEPROM read of absent SFP module The patchset is to improve EEPROM read requests when SFP module is absent. ChangeLog: v1: https://lore.kernel.org/netdev/20230405153900.747-1-i.bornyakov@metrotek.ru/ v2: * reword commit message of "net: sfp: initialize sfp->i2c_block_size at sfp allocation" * add second patch to eliminate excessive I2C transfers in sfp_module_eeprom() and sfp_module_eeprom_by_page() ==================== Signed-off-by:
-
Ivan Bornyakov authored
If SFP module is not present, it is sensible to fail sfp_module_eeprom() and sfp_module_eeprom_by_page() early to avoid excessive I2C transfers which are garanteed to fail. Suggested-by:
Ivan Bornyakov <i.bornyakov@metrotek.ru> Reviewed-by:
-
Ivan Bornyakov authored
sfp->i2c_block_size is initialized at SFP module insertion in sfp_sm_mod_probe(). Because of that, if SFP module was never inserted since boot, sfp_read() call will lead to zero-length I2C read attempt, and not all I2C controllers are happy with zero-length reads. One way to issue sfp_read() on empty SFP cage is to execute ethtool -m. If SFP module was never plugged since boot, there will be a zero-length I2C read attempt. # ethtool -m xge0 i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read) Cannot get Module EEPROM data: Operation not supported If SFP module was plugged then removed at least once, sfp->i2c_block_size will be initialized and ethtool -m will fail with different exit code and without I2C error # ethtool -m xge0 Cannot get Module EEPROM data: Remote I/O error Fix this by initializing sfp->i2_block_size at struct sfp allocation stage so no wild sfp_read() could issue zero-length I2C read. Signed-off-by:
-
- 08 Apr, 2023 1 commit
-
-
Douglas Anderson authored
When memory is a little tight on my system, it's pretty easy to see warnings that look like this. ksoftirqd/0: page allocation failure: order:3, mode:0x40a20(GFP_ATOMIC|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 ... Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x20/0x2c dump_stack_lvl+0x60/0x78 dump_stack+0x18/0x38 warn_alloc+0x104/0x174 __alloc_pages+0x588/0x67c alloc_rx_agg+0xa0/0x190 [r8152 ...] r8152_poll+0x270/0x760 [r8152 ...] __napi_poll+0x44/0x1ec net_rx_action+0x100/0x300 __do_softirq+0xec/0x38c run_ksoftirqd+0x38/0xec smpboot_thread_fn+0xb8/0x248 kthread+0x134/0x154 ret_from_fork+0x10/0x20 On a fragmented system it's normal that order 3 allocations will sometimes fail, especially atomic ones. The driver handles these failures fine and the WARN just creates spam in the logs for this case. The __GFP_NOWARN flag is exactly for this situation, so add it to the allocation. NOTE: my testing is on a 5.15 system, but there should be no reason that this would be fundamentally different on a mainline kernel. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20230406171411.1.I84dbef45786af440fd269b71e9436a96a8e7a152@changeidSigned-off-by:
-
