Pull locking changes from Ingo Molnar:
 "The most noticeable change are mutex speedups from Waiman Long, for
  higher loads.  These scalability changes should be most noticeable on
  larger server systems.

  There are also cleanups, fixes and debuggability improvements."

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Consolidate bug messages into a single print_lockdep_off() function
  lockdep: Print out additional debugging advice when we hit lockdep BUGs
  mutex: Back out architecture specific check for negative mutex count
  mutex: Queue mutex spinners with MCS lock to reduce cacheline contention
  mutex: Make more scalable by doing less atomic operations
  mutex: Move mutex spinning code from sched/core.c back to mutex.c
  locking/rtmutex/tester: Set correct permissions on sysfs files
  lockdep: Remove unnecessary 'hlock_next' variable

Pull s390 update from Martin Schwidefsky:
 "This is the first batch of s390 patches for the 3.10 merge window.

  Included are some performance enhancements: storage key
  initialization, zero page cache synonyms, system call micro
  optimization and the speedup patches for dasdfmt.  Sebastian managed
  to get rid of the special casing for the console device in the cio
  layer.  And the usual bunch of bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits)
  s390/pci: use pci_scan_root_bus
  s390/scm_blk: fix memleak in init function
  s390/scm_blk: allow more cluster size values
  s390/cio: fix irq statistics
  s390/memory hotplug: prevent offline of active memory increments
  s390: remove small stack config option
  s390: system call path micro optimization
  s390: lowcore stack pointer offsets
  s390/uapi: change struct statfs[64] member types to unsigned values
  s390/pci: return correct dma address for offset > PAGE_SIZE
  s390/ptrace: remove empty ifdefs
  s390/compat: remove ptrace compat definitions from uapi header file
  s390/compat: fix compile error for !COMPAT
  s390/compat: fix compat_sys_statfs() memory corruption
  s390/zcore: Fix HSA copy length for last block
  s390/mm,gmap: segment mapping race
  s390/mm,gmap: implement gmap_translate()
  s390/pci: remove disable_device implementation
  s390/pci: disable per default
  s390/pci: return error after failed pci ops
  ...

Merge tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen updates from Konrad Rzeszutek Wilk:
 "Features:
   - Populate the boot_params with EDD data.
   - Cleanups in the IRQ code.
  Bug-fixes:
   - CPU hotplug offline/online in PVHVM mode.
   - Re-upload processor PM data after ACPI S3 suspend/resume cycle."

And Konrad gets a gold star for sending the pull request early when he
thought he'd be away for the first week of the merge window (but because
of 3.9 dragging out to -rc8 he then re-sent the reminder on the first
day of the merge window anyway)

* tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: resolve section mismatch warnings in xen-acpi-processor
  xen: Re-upload processor PM data to hypervisor after S3 resume (v2)
  xen/smp: Unifiy some of the PVs and PVHVM offline CPU path
  xen/smp/pvhvm: Don't initialize IRQ_WORKER as we are using the native one.
  xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM
  xen/spinlock:  Check against default value of -1 for IRQ line.
  xen/time: Add default value of -1 for IRQ and check for that.
  xen/events: Check that IRQ value passed in is valid.
  xen/time: Fix kasprintf splat when allocating timer%d IRQ line.
  xen/smp/spinlock: Fix leakage of the spinlock interrupt line for every CPU online/offline
  xen/smp: Fix leakage of timer interrupt line for every CPU online/offline.
  xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND
  xen: drop tracking of IRQ vector
  x86/xen: populate boot_params with EDD data

Pull ARM SoC fix from Olof Johansson:
 "A late-arriving fix for musb on OMAP4, resolving an issue where the
  musb IP won't be clocked and thus not functional.  Small in scope,
  most of the lines changed is a longish comment."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock

I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.

Here's the fairly minimal stub to make the nommu case at least
potentially work.  It doesn't seem like anybody cares, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fix from Ingo Molnar:
 "This fix adds missing RCU read protection"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Protect access via task_subsys_state_check()

Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.

* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull media fixes from Mauro Carvalho Chehab:
 "Two driver fixes.

  One avoids reading any file at a system with a cx25821 board
  (fortunately, this is not a common device).  The other one prevents
  reading after a buffer with ISDB-T devices based on mb86a20s."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] cx25821: do not expose broken video output streams
  [media] mb86a20s: Fix estimate_rate setting

Pull late parisc fixes from Helge Deller:
 "I know it's *very* late in the 3.9 release cycle, but since there
  aren't that many people testing the parisc linux kernel, a few (for
  our port) critical issues just showed up a few days back for the first
  time.

  What's in it?
   - add missing __ucmpdi2 symbol, which is required for btrfs on 32bit
     kernel.
   - change kunmap() macro to static inline function.  This fixes a
     debian/gcc-4.4 build error.
   - add locking when doing PTE updates.  This fixes random userspace
     crashes.
   - disable (optional) -mlong-calls compiler option for modules, else
     modules can't be loaded at runtime.
   - a smart patch by Will Deacon which fixes 64bit put_user() warnings
     on 32bit kernel."

* 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
  parisc: disable -mlong-calls compiler option for kernel modules
  parisc: uaccess: fix compiler warnings caused by __put_user casting
  parisc: Change kunmap macro to static inline function
  parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.

variable_is_present() accesses '__efivars' directly, but when called via
gsmi_init() Michel reports observing the following crash,

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: variable_is_present+0x55/0x170
  Call Trace:
    register_efivars+0x106/0x370
    gsmi_init+0x2ad/0x3da
    do_one_initcall+0x3f/0x170

The reason for the crash is that '__efivars' hasn't been initialised nor
has it been registered with register_efivars() by the time the google
EFI SMI driver runs.  The gsmi code uses its own struct efivars, and
therefore, a different variable list.  Fix the above crash by passing
the registered struct efivars to variable_is_present(), so that we
traverse the correct list.
Reported-by: Michel Lespinasse <walken@google.com>
Tested-by: Michel Lespinasse <walken@google.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit b0de59b5 ("TTY: do not update atime/mtime on read/write")
we removed timestamps from tty inodes to fix a security issue and waited
if something breaks.  Well, 'w', the utility to find out logged users
and their inactivity time broke.  It shows that users are inactive since
the time they logged in.

To revert to the old behaviour while still preventing attackers to
guess the password length, we update the timestamps in one-minute
intervals by this patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dprintk() shouldn't access @ring after it's unmapped.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pci config space accessors on s390 are (now) smart enough to
figure out if a pci function is available. So instead of calling
pci_create_root_bus and then pci_scan_single_device for each
available function just call pci_scan_root_bus and let the pci core
do the scanning (via config reads on all possible functions) and
device creation.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If the allocation of a single request fails the already allocated
requests will not be freed.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Allow 0 and powers of 2 between 2 and 128 for write_cluster_size.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

When we fetch an interrupt on the CCW console using tsch (via
ccw_device_wait_idle formerly known as wait_cons_dev) we increment
the irq count for the affected interruption class but it is not
accounted as an IO interrupt.

This is broken since commit b603d258
"s390: remove superfluous tpi from wait_cons_dev"

Fix it so that the sum of the individual interrupts per class matches
the number of IO interrupts again.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

In case a machine supports memory hotplug all active memory increments
present at IPL time have been initialized with a "usecount" of 1.
This is wrong if the memory increment size is larger than the memory
section size of the memory hotplug code. If that is the case the
usecount must be initialized with the number of memory sections that
fit into one memory increment.
Otherwise it is possible to put a memory increment into standby state
even if there are still active sections.
Afterwards addressing exceptions might happen which cause the kernel
to panic.
However even worse, if a memory increment was put into standby state
and afterwards into active state again, it's contents would have been
zeroed, leading to memory corruption.

This was only an issue for machines that support standby memory and
have at least 256GB memory.

This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix
initial usecount of increments".
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

We've seen repeatedly that 8KB stack size on 64 bit kernels
is not sufficient.
So simply remove the config option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add a pointer to the system call table to the thread_info structure.
The TIF_31BIT bit is set or cleared by SET_PERSONALITY exactly once
for the lifetime of a process. With the pointer to the correct system
call table in thread_info the system call code in entry64.S path can
drop the check for TIF_31BIT which saves a couple of instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Store the stack pointers in the lowcore for the kernel stack, the async
stack and the panic stack with the offset required for the first user.
This avoids an unnecessary add instruction on the system call path.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Also add some missing printk levels.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130425174002.GA26769@redhat.com
[ Tweaked the messages a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

We occasionally get reports of these BUGs being hit, and the
stack trace doesn't necessarily always tell us what we need to
know about why we are hitting those limits.

If users start attaching /proc/lock_stats to reports we may have
more of a clue what's going on.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130423163403.GA12839@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

 * The EFI variable anti-bricking algorithm merged in -rc8 broke booting
   on some Apple machines because they implement EFI spec 1.10, which
   doesn't provide a QueryVariableInfo() runtime function and the logic
   used to check for the existence of that function was insufficient.
   Fix from Josh Boyer.

 * The anti-bricking algorithm also introduced a compiler warning on
   32-bit. Fix from Borislav Petkov.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

User applications running on SMP kernels have long suffered from instability
and random segmentation faults.  This patch improves the situation although
there is more work to be done.

One of the problems is the various routines in pgtable.h that update page table
entries use different locking mechanisms, or no lock at all (set_pte_at).  This
change modifies the routines to all use the same lock pa_dbit_lock.  This lock
is used for dirty bit updates in the interruption code. The patch also purges
the TLB entries associated with the PTE to ensure that inconsistent values are
not used after the page table entry is updated.  The UP and SMP code are now
identical.

The change also includes a minor update to the purge_tlb_entries function in
cache.c to improve its efficiency.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

CONFIG_MLONGCALLS was introduced in commit
ec758f98 to overcome linker issues when linking
huge linux kernels, e.g. with many modules linked in.

But in the kernel module loader there is no support yet for the new relocation
types, which is why modules built with -mlong-calls can't be loaded.
Furthermore, for modules long calls are not really necessary, since we already
use stub sections which resolve long distance calls.

So, let's just disable this compiler option when compiling kernel modules.
Signed-off-by: Helge Deller <deller@gmx.de>

When targetting 32-bit processors, __put_user emits a pair of stw
instructions for the 8-byte case. If the type of __val is a pointer, the
marshalling code casts it to the wider integer type of u64, resulting
in the following compiler warnings:

  kernel/signal.c: In function 'copy_siginfo_to_user':
  kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  [...]

This patch fixes the warnings by removing the marshalling code and using
the correct output modifiers in the __put_{user,kernel}_asm64 macros
so that GCC will allocate the right registers without the need to
extract the two words explicitly.

Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Change kunmap macro to static inline function to fix build error
compiling drivers/base/dma-buf.c.

Without the change, the following error can occur:

   CC      drivers/base/dma-buf.o
drivers/base/dma-buf.c: In function 'dma_buf_kunmap':
drivers/base/dma-buf.c:427:46:
error: macro "kunmap" passed 3 arguments, but takes just 1

I believe parisc is the only arch to implement kunmap using a macro.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

The Debian experimental linux source package (3.8.5-1) build fails
with the following errors:
...
MODPOST 2016 modules
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined!

The attached patch resolves this problem.  It is based on the s390
implementation of ucmpdi2.c.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull sparc fix from David Miller:
 "Brown paper bag fix for sparc64"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.

Pull gpi fix from Linus Walleij:
 "This is a last minute revert for the GPIO tree, as Mike Dunn noticed
  breakage on some older PXA machines due to moving PXA GPIO initcalls
  to the module_init initlevel"

* tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio: pxa: set initcall level to module init"

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 6c7e660a.

The commit causes breakage on several older PXA machines.
Reported-by: Mike Dunn <mikedunn@newsguy.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

We need to check the runtime sys_table for the EFI version the firmware
specifies instead of just checking for a NULL QueryVariableInfo.  Older
implementations of EFI don't have QueryVariableInfo but the runtime is
a smaller structure, so the pointer to it may be pointing off into garbage.

This is apparently the case with several Apple firmwares that support EFI
1.10, and the current check causes them to no longer boot.  Fix based on
a suggestion from Matthew Garrett.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Fix this:

arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’:
arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default]
In file included from arch/x86/boot/compressed/eboot.c:12:0:
/w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’

after cc5a080c ("efi: Pass boot services variable info to runtime
code").
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Kay Sievers reported that coreutils' stat tool has a problem with
s390's statfs[64] definition:

> The definition of struct statfs::f_type needs a fix. s390 is the only
> architecture in the kernel that uses an int and expects magic
> constants lager than INT_MAX to fit into.
>
> A fix is needed to make Fedora boot on s390, it currently fails to do
> so. Userspace does not want to add code to paper-over this issue.

[...]

> Even coreutils cannot handle it:
>   #define RAMFS_MAGIC  0x858458f6
>   # stat -f -c%t /
>   ffffffff858458f6
>
>   #define BTRFS_SUPER_MAGIC 0x9123683E
>   # stat -f -c%t /mnt
>   ffffffff9123683e

The bug is caused by an implicit sign extension within the stat tool:

out_uint_x (pformat, prefix_len, statfsbuf->f_type);

where the format finally will be "%lx".
A similar problem can be found in the 'tail' tool.
s390 is the only architecture which has an int type f_type member in
struct statfs[64]. Other architectures have either unsigned ints or
long values, so that the problem doesn't occur there.

Therefore change the type of the f_type member to unsigned int, so
that we get zero extension instead of sign extension when assignment to
a long value happens.

This patch changes the s390 uapi struct stafs[64] definition in the kernel
to contain only unsigned values.
This was true for 32 bit builds anyway, since we use the generic uapi
header file in that case. So lets not include conditionally the generic
uapi header file but have the s390 implementation completely independent.

Also fix the types of struct compat_stafs to match reality and move the
definition of struct compat_statfs64 to asm/compat.h since it is not part
of the api.
Reported-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

For offset > PAGE_SIZE, s390_dma_map_pages() will issue a warning
and return a wrong dma address.

This patch removes the warning and fixes the dma return address
calculation.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The compat definitions are not part of the uapi. So move them to
s390's private compat header file.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix this one for !COMPAT:

compat.h: In function ‘arch_compat_alloc_user_space’:
compat.h:292:2: error: implicit declaration of function ‘is_compat_task’
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>