- 28 Mar, 2023 1 commit
-
-
Damien Le Moal authored
There is no reason to have compilation of the bpck6 protocol module being dependent on 64BIT. Remove this dependency. Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
Ondrej Zary <linux@zary.sk>
-
- 23 Mar, 2023 39 commits
-
-
Ondrej Zary authored
Reverse error handling conditions to reduce code indents in bpck6_open. Signed-off-by:
-
Ondrej Zary authored
Remove now empty ppc6lnx.c. Signed-off-by:
-
Ondrej Zary authored
Move all register definitions and mode_map to bpck6.c Signed-off-by:
-
Ondrej Zary authored
Move ppc6_wr_data_byte to bpck6.c and rename it to bpck6_wr_data_byte Signed-off-by:
-
Ondrej Zary authored
Move ppc6_rd_data_byte to bpck6.c and rename it to bpck6_rd_data_byte Signed-off-by:
-
Ondrej Zary authored
Move ppc6_send_cmd to bpck6.c and rename it to bpck6_send_cmd Signed-off-by:
-
Ondrej Zary authored
Move ppc6_deselect to bpck6.c and rename it to bpck6_deselect Signed-off-by:
-
Ondrej Zary authored
ppc6_select is only called by bpck6_open. Merge ppc6_select into bpck6_open. Signed-off-by:
-
Ondrej Zary authored
Move ppc6_open to bpck6.c and rename it to bpck6_open Signed-off-by:
-
Ondrej Zary authored
Move ppc6_wr_extout to bpck6.c and rename it to bpck6_wr_extout Signed-off-by:
-
Ondrej Zary authored
Move ppc6_wait_for_fifo to bpck6.c and rename it to bpck6_wait_for_fifo Signed-off-by:
-
Ondrej Zary authored
ppc6_wr_data_blk is only called by bpck6_write_block. Merge ppc6_wr_data_blk into bpck6_write_block. Signed-off-by:
-
Ondrej Zary authored
ppc6_rd_data_blk is only called by bpck6_read_block. Merge ppc6_rd_data_blk into bpck6_read_block. Signed-off-by:
-
Ondrej Zary authored
ppc6_wr_port16_blk is only called by bpck6_write_block. Merge ppc6_wr_port16_blk into bpck6_write_block. Signed-off-by:
-
Ondrej Zary authored
ppc6_rd_port16_blk is only called by bpck6_read_block. Merge ppc6_rd_port16_blk into bpck6_read_block. Signed-off-by:
-
Ondrej Zary authored
ppc6_wr_port is only called by bpck6_write_regr. Merge ppc6_wr_port into bpck6_write_regr. Signed-off-by:
-
Ondrej Zary authored
ppc6_rd_port is only called by bpck6_read_regr. Merge ppc6_rd_port into bpck6_read_regr. Signed-off-by:
-
Ondrej Zary authored
ppc6_close does not do anything except calling ppc6_deselect. Remove ppc6_close and call ppc6_deselect directly. Signed-off-by:
-
Ondrej Zary authored
pi->private is now not used for any other purpose, so store wait_fifo flag directly there and remove PPC_FLAGS define. Signed-off-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
-
Ondrej Zary authored
Use parport_frob_control instead of manually maintaining control register state. Signed-off-by:
-
Ondrej Zary authored
Use parport access functions instead of inb/outb/inw/outw/inl/outl. Signed-off-by:
-
Ondrej Zary authored
PARPORT_EPP_FAST flag currently uses 32-bit I/O port access for data read/write (insl/outsl). Add PARPORT_EPP_FAST_16 and PARPORT_EPP_FAST_8 that use insw/outsw and insb/outsb (and PARPORT_EPP_FAST_32 as alias for PARPORT_EPP_FAST). Signed-off-by:
-
Ondrej Zary authored
Remove port_stb, port_afd, cmd_stb, port_init, data_stb and port_sel defines and use standard PARPORT_CONTROL_* instead. Signed-off-by:
-
Ondrej Zary authored
Store the remaining two variables (cur_ctrl and ppc_flags) in struct ppc_storage directly in pi->private and remove struct ppc_storage. Signed-off-by:
-
Ondrej Zary authored
introduce mode_map[] that maps bpck6 modes to ppc6 modes and use it to replace mode in ppc_storage Signed-off-by:
-
Ondrej Zary authored
org_data duplicates saved_r0 and org_ctrl duplicates saved_r2 in pi->unit. Remove them. Signed-off-by:
-
Ondrej Zary authored
ppc_id duplicates pi->unit. Remove it. Signed-off-by:
-
Ondrej Zary authored
lpt_addr duplicates pi->port. Remove it. Signed-off-by:
-
Ondrej Zary authored
Remove Interface typedef, pass around struct pi_adapter * down to all functions instead. Remove PPCSTRUCT define. Signed-off-by:
-
Ondrej Zary authored
pi->pardev is struct pardevice *, no need to cast it to the same type. Also clean up the return mess. Signed-off-by:
-
Ondrej Zary authored
bpck6_read_regr() and bpck6_write_regr() check values of cont and reg but there's no point in doing that. They can only be called with a fixed set of values. Remove the checks. Signed-off-by:
-
Ondrej Zary authored
Almost all the ATAPI_ defines are unused. Remove them and use ATA_REG_DATA instead of ATAPI_DATA. Signed-off-by:
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
The Freescale QorIQ AHCI SATA controller is only present on Freescale Layerscape SoCs. Add platform dependencies to the AHCI_QORIQ config symbol, to avoid asking the user about it when configuring a kernel without Layerscape support. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Li Yang <leoyang.li@nxp.com> Signed-off-by:
-
Kunihiko Hayashi authored
Add UniPhier SATA controller compatible string to the platform binding. This controller needs three reset controls for Pro4 SoC, or two reset controls for PXs2 and PXs3 SoCs. Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Sergey Shtylyov authored
This function was renamed from lba_capacity_is_ok()() and moved from drivers/ide/ to <linux/ata.h> but it never got used by libata, thus it became useless after drivers/ide/ removal... Signed-off-by:
-
Sergey Shtylyov authored
This function was renamed from ide_id_to_hd_driveid() and moved from drivers/ide/ to <linux/ata.h> but it never got used by libata, thus it became useless after drivers/ide/ removal... Signed-off-by:
-
Ondrej Zary authored
Now that paride is gone, pata_parport.h does not need to be in include/linux. Move it to drivers/ata/pata_parport. Reviewed-by:
-
Ondrej Zary authored
Remove obsolete changelogs from protocol drivers. Reviewed-by:
-
