- 15 Jun, 2021 40 commits
-
-
M Chetan Kumar authored
Fixes .rst file warnings seen on linux-next build. Fixes: f7af616c ("net: iosm: infrastructure") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The pointer dev can never be null, the null check is redundant and can be removed. Cleans up a static analysis warning that pointer priv is dereferencing dev before dev is being null checked. Addresses-Coverity: ("Dereference before null check") Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jussi Maki authored
The round-robin rr_tx_counter was shared across CPUs leading to significant cache thrashing at high packet rates. This patch switches the round-robin packet counter to use a per-cpu variable to decide the destination slave. On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh (-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after this patch. "perf top -e cache_misses" before: 12.31% [bonding] [k] bond_xmit_roundrobin_slave_get 10.59% [sch_fq_codel] [k] fq_codel_dequeue 9.34% [kernel] [k] skb_release_data after: 15.42% [sch_fq_codel] [k] fq_codel_dequeue 10.06% [kernel] [k] __memset 9.12% [kernel] [k] skb_release_data Signed-off-by:Jussi Maki <joamaki@gmail.com> Signed-off-by:
-
Liu Shixin authored
Hulk Robot reported memory leak in netlbl_mgmt_add_common. The problem is non-freed map in case of netlbl_domhsh_add() failed. BUG: memory leak unreferenced object 0xffff888100ab7080 (size 96): comm "syz-executor537", pid 360, jiffies 4294862456 (age 22.678s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 ................ backtrace: [<0000000008b40026>] netlbl_mgmt_add_common.isra.0+0xb2a/0x1b40 [<000000003be10950>] netlbl_mgmt_add+0x271/0x3c0 [<00000000c70487ed>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 [<000000001f2ff614>] genl_rcv_msg+0x2bf/0x4f0 [<0000000089045792>] netlink_rcv_skb+0x134/0x3d0 [<0000000020e96fdd>] genl_rcv+0x24/0x40 [<0000000042810c66>] netlink_unicast+0x4a0/0x6a0 [<000000002e1659f0>] netlink_sendmsg+0x789/0xc70 [<000000006e43415f>] sock_sendmsg+0x139/0x170 [<00000000680a73d7>] ____sys_sendmsg+0x658/0x7d0 [<0000000065cbb8af>] ___sys_sendmsg+0xf8/0x170 [<0000000019932b6c>] __sys_sendmsg+0xd3/0x190 [<00000000643ac172>] do_syscall_64+0x37/0x90 [<000000009b79d6dc>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 63c41688 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2021-06-14 1) Trivial Lag refactroing in preparation for upcomming Single FDB lag feature - First 3 patches 2) Scalable IRQ distriburion for Sub-functions A subfunction (SF) is a lightweight function that has a parent PCI function (PF) on which it is deployed. Currently, mlx5 subfunction is sharing the IRQs (MSI-X) with their parent PCI function. Before this series the PF allocates enough IRQs to cover all the cores in a system, Newly created SFs will re-use all the IRQs that the PF has allocated for itself. Hence, the more SFs are created, there are more EQs per IRQs. Therefore, whenever we handle an interrupt, we need to pull all SFs EQs and PF EQs instead of PF EQs without SFs on the system. This leads to a hard impact on the performance of SFs and PF. For example, on machine with: Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz with 56 cores. PCI Express 3 with BW of 126 Gb/s. ConnectX-5 Ex; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe4.0 x16. test case: iperf TX BW single CPU, affinity of app and IRQ are the same. PF only: no SFs on the system, 56 IRQs. SF (before), 250 SFs Sharing the same 56 IRQs . SF (now), 250 SFs + 255 avaiable IRQs for the NIC. (please see IRQ spread scheme below). application SF-IRQ channel BW(Gb/sec) interrupts/sec iperf TX affinity PF only cpu={0} cpu={0} cpu={0} 79 8200 SF (before) cpu={0} cpu={0} cpu={0} 51.3 (-35%) 9500 SF (now) cpu={0} cpu={0} cpu={0} 78 (-2%) 8200 command: $ taskset -c 0 iperf -c 11.1.1.1 -P 3 -i 6 -t 30 | grep SUM The different between the SF examples is that before this series we allocate num_cpus (56) IRQs, and all of them were shared among the PF and the SFs. And after this series, we allocate 255 IRQs, and we spread the SFs among the above IRQs. This have significantly decreased the load on each IRQ and the number of EQs per IRQ is down by 95% (251->11). In this patchset the solution proposed is to have a dedicated IRQ pool for SFs to use. the pool will allocate a large number of IRQs for SFs to grab from in order to minimize irq sharing between the different SFs. IRQs will not be requested from the OS until they are 1st requested by an SF consumer, and will be eventually released when the last SF consumer releases them. For the detailed IRQ spread and allocation scheme please see last patch: ("net/mlx5: Round-Robin EQs over IRQs") ==================== Signed-off-by: -
David S. Miller authored
Subbaraya Sundeep says: ==================== octeontx2: Add ingress ratelimit offload This patchset adds ingress rate limiting hardware offload support for CN10K silicons. Police actions are added for TC matchall and flower filters. CN10K has ingress rate limiting feature where a receive queue is mapped to bandwidth profile and the profile is configured with rate and burst parameters by software. CN10K hardware supports three levels of ingress policing or ratelimiting. Multiple leaf profiles can point to a single mid level profile and multiple mid level profile can point to a single top level one. Only leaf level profiles are used for configuring rate limiting. Patch 1 adds the new bandwidth profile contexts in AF driver similar to other hardware contexts Patch 2 adds the debugfs changes to dump bandwidth profile contexts Patch 3 adds support for police action with TC matchall filter Patch 4 uses NL_SET_ERR_MSG_MOD for tc code Patch 5 adds support for police action with TC flower filter ==================== Signed-off-by: -
Subbaraya Sundeep authored
Added police action for ingress TC flower hardware offload. With this rate limiting can be done per flow. Since rate limiting is tied to RQs in hardware the number of TC flower filters with action as police is limited to number of receive queues of the interface. Both bps and pps modes are supported. Examples to rate limit a flow: $ ethtool -K eth0 hw-tc-offload on $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 parent ffff: protocol ip \ flower ip_proto udp dst_port 80 action \ police rate 100Mbit burst 32Kbit $ tc filter add dev eth0 parent ffff: \ protocol ip flower dst_mac 5e:b2:34:ee:29:49 \ action police pkts_rate 5000 pkts_burst 2048 Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
Subbaraya Sundeep authored
This patch modifies all netdev_err messages in tc code to NL_SET_ERR_MSG_MOD. NL_SET_ERR_MSG_MOD does not support format specifiers yet hence netdev_err messages with only strings are modified. Signed-off-by:
-
Sunil Goutham authored
Add TC_MATCHALL ingress ratelimiting offload support with POLICE action for entire traffic coming into the interface. Eg: To ratelimit ingress traffic to 100Mbps $ ethtool -K eth0 hw-tc-offload on $ tc qdisc add dev eth0 clsact $ tc filter add dev eth0 ingress matchall skip_sw \ action police rate 100Mbit burst 32Kbit To support this, a leaf level bandwidth profile is allocated and all RQs' contexts used by this interface are updated to point to it. And the leaf level bandwidth profile is configured with user specified rate and burst sizes. Co-developed-by: -
Sunil Goutham authored
Added support for dumping current resource status of bandwidth profiles and contexts of allocated profiles via debugfs. Signed-off-by:
-
Sunil Goutham authored
CN10K silicons supports hierarchial ingress packet ratelimiting. There are 3 levels of profilers supported leaf, mid and top. Ratelimiting is done after packet forwarding decision is taken and a NIXLF's RQ is identified to DMA the packet. RQ's context points to a leaf bandwidth profile which can be configured to achieve desired ratelimit. This patch adds logic for management of these bandwidth profiles ie profile alloc, free, context update etc. Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: pci200syn: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... This patch fixes the comments style issues. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
Macro argument 'card' may be better as '(card)' to avoid precedence issues. Signed-off-by:
-
Peng Li authored
Add spaces required after that close brace '}'. Add spaces required before the open parenthesis '('. Add spaces required after that ','. Signed-off-by: -
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "!card". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: z85230: clean up some code style issues This patchset clean up some code style issues. --- Change Log: V1 -> V2: 1, fix the comments from Andrew, add commit message to [patch 04/11] about remove volatile. ==================== Signed-off-by: -
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
This patch fixes the code style issue according to checkpatch.pl error: "ERROR: that open brace { should be on the previous line". Signed-off-by: -
Peng Li authored
Add space required before the open parenthesis '(' and '{'. Add space required after that close brace '}' and ',' Add spaces required around that '=' , '&', '*', '|', '+', '/' and '-'. Signed-off-by: -
Peng Li authored
This patch removes trailing whitespaces. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, else should follow close brace '}', braces {} should be used on all arms of this statement. Signed-off-by: -
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "!skb". Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, EXPORT_SYMBOL(foo); should immediately follow its function/variable. Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
Boris Sukholitko authored
The following flower filters fail to match packets: tc filter add dev eth0 ingress protocol 0x8864 flower \ action simple sdata hi64 tc filter add dev eth0 ingress protocol 802.1q flower \ vlan_ethtype 0x8864 action simple sdata "hi vlan" The protocol 0x8864 (ETH_P_PPP_SES) is a tunnel protocol. As such, it is being dissected by __skb_flow_dissect and it's internal protocol is being set as key->basic.n_proto. IOW, the existence of ETH_P_PPP_SES tunnel is transparent to the callers of __skb_flow_dissect. OTOH, in the filters above, cls_flower configures its key->basic.n_proto to the ETH_P_PPP_SES value configured by the user. Matching on this key fails because of __skb_flow_dissect "transparency" mentioned above. In the following, I would argue that the problem lies with cls_flower, unnessary attempting key->basic.n_proto match. There are 3 close places in fl_set_key in cls_flower setting up mask->basic.n_proto. They are (in reverse order of appearance in the code) due to: (a) No vlan is given: use TCA_FLOWER_KEY_ETH_TYPE parameter (b) One vlan tag is given: use TCA_FLOWER_KEY_VLAN_ETH_TYPE (c) Two vlans are given: use TCA_FLOWER_KEY_CVLAN_ETH_TYPE The match in case (a) is unneeded because flower has no its own eth_type parameter. It was removed by Jamal Hadi Salim in commit 488b41d020fb06428b90289f70a41210718f52b7 in iproute2. For TCA_FLOWER_KEY_ETH_TYPE the userspace uses the generic tc filter protocol field. Therefore the match for the case (a) is done by tc itself. The matches in cases (b), (c) are unneeded because the protocol will appear in and will be matched by flow_dissector_key_vlan.vlan_tpid. Therefore in the best case, key->basic.n_proto will try to repeat vlan key match again. The below patch removes mask->basic.n_proto setting and resets it to 0 in case (c). Signed-off-by:
Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by:
-
Matteo Croce authored
On RX an SKB is allocated and the received buffer is copied into it. But on some architectures, the memcpy() needs the source and destination buffers to have the same alignment to be efficient. This is not our case, because SKB data pointer is misaligned by two bytes to compensate the ethernet header. Align the RX buffer the same way as the SKB one, so the copy is faster. An iperf3 RX test gives a decent improvement on a RISC-V machine: before: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 733 MBytes 615 Mbits/sec 88 sender [ 5] 0.00-10.01 sec 730 MBytes 612 Mbits/sec receiver after: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 1.09 GBytes 940 Mbits/sec receiver And the memcpy() overhead during the RX drops dramatically. before: Overhead Shared O Symbol 43.35% [kernel] [k] memcpy 33.77% [kernel] [k] __asm_copy_to_user 3.64% [kernel] [k] sifive_l2_flush64_range after: Overhead Shared O Symbol 45.40% [kernel] [k] __asm_copy_to_user 28.09% [kernel] [k] memcpy 4.27% [kernel] [k] sifive_l2_flush64_range Signed-off-by:
Matteo Croce <mcroce@microsoft.com> Signed-off-by:
-
Shay Drory authored
Whenever users provided affinity for an EQ creation request, map the EQ to a matching IRQ. Matching IRQ=IRQ with the same affinity and type (completion/control) of the EQ created. This mapping is being done in agressive dedicated IRQ allocation scheme, which described bellow. First, we check whether there is a matching IRQ that his min threshold is not exhausted. - min_eqs_threshold = 3 for control EQ. - min_eqs_threshold = 1 for completion EQ. In case no matching IRQ was found, try to request a new IRQ. In case we can't request a new IRQ, reuse least-used matching IRQ. Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Shay Drory authored
Move mlx5_sf_max_functions() and friends from the privete sf/sf.h to the public lib/sf.h. This is done in order to have one direction include paths. Signed-off-by:
-
Shay Drory authored
FW is now supporting more than 256 MSI-X per PF (up to 2K). Hence, enlarge interrupt field in CREATE_EQ to make use of the new MSI-X's. Signed-off-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
-
Shay Drory authored
SFs (Sub Functions) currently use IRQs from the global IRQ table their parent Physical Function have. In order to better scale, we need to allocate more IRQs and share them between different SFs. Driver will maintain 3 separated irq pools: 1. A pool that serve the PF consumer (PF's netdev, rdma stacks), similar to what the driver had before this patch. i.e, this pool will share irqs between rdma and netev, and will keep the irq indexes and allocation order. The last is important for PF netdev rmap (aRFS). 2. A pool of control IRQs for SFs. The size of this pool is the number of SFs that can be created divided by SFS_PER_IRQ. This pool will serve the control path EQs of the SFs. 3. A pool of completion data path IRQs for SFs transport queues. The size of this pool is: num_irqs_allocated - pf_pool_size - sf_ctrl_pool_size. This pool will served netdev and rdma stacks. Moreover, rmap is not supported on SFs. Sharing methodology of the SFs pools is explained in the next patch. Important note: rmap is not supported on SFs because rmap mapping cannot function correctly for IRQs that are shared for different core/netdev RX rings. Signed-off-by:
-
Shay Drory authored
Store newly created IRQs in the xarray DB instead of a static array, so we will be able to store only IRQs which are being used. Signed-off-by:
-
Shay Drory authored
IRQs are being simplified in order to ease their sharing and any feature specific object will be moved to upper layer. Hence we move rmap object into eq_table. Signed-off-by:
-
Shay Drory authored
Extend mlx5_irq_request so that IRQs will be requested upon EQ creation, and not on driver boot. Signed-off-by:
-
Shay Drory authored
In next patches, IRQs will be requested according to demand, instead of statically on driver boot. Also, currently, rmap is managed by the IRQ layer. rmap management will move out from the IRQ layer in future patches. Therefore, we want to remove the IRQ from the rmap, when IRQ is destroyed, instead of removing all the IRQs from the rmap when irq_table is destroyed. Signed-off-by:
-
