This is a layering violation so we replace the uses with calls to
sg_page().  This is a prep patch for replacing page_link and this is one
of the very few uses outside of scatterlist.h.

Link: http://lkml.kernel.org/r/1495663199-22234-1-git-send-email-logang@deltatee.comSigned-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use errors=replace because it is never desirable for lx-dmesg to fail on
string decoding errors, not even if the log buffer is corrupt and we
show incorrect info.

The kernel will sometimes print utf8, for example the copyright symbol
from jffs2.  In order to make this work specify 'utf8' everywhere
because python2 otherwise defaults to 'ascii'.

In theory the second errors='replace' is not be required because
everything that can be decoded as utf8 should also be encodable back to
utf8.  But it's better to be extra safe here.  It's worth noting that
this is definitely not true for encoding='ascii', unknown characters are
replaced with U+FFFD REPLACEMENT CHARACTER and they fail to encode back
to ascii.

Link: http://lkml.kernel.org/r/acee067f3345954ed41efb77b80eebdc038619c6.1498481469.git.leonard.crestez@nxp.comSigned-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kieran@ksquared.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In some cases it is possible for the str() conversion here to throw
encoding errors because log_buf might not point to valid ascii.  For
example:

  (gdb) python print str(gdb.parse_and_eval("log_buf"))
  Traceback (most recent call last):
    File "<string>", line 1, in <module>
  UnicodeEncodeError: 'ascii' codec can't encode character u'\u0303' in
  	position 24: ordinal not in range(128)

Avoid this by explicitly casting to (void *) inside the gdb expression.

Link: http://lkml.kernel.org/r/ba6f85dbb02ca980ebd0e2399b0649423399b565.1498481469.git.leonard.crestez@nxp.comSigned-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kieran@ksquared.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lx-fdtdump dumps the flattened device tree passed to the kernel from the
bootloader to the filename specified as the command argument.  If no
argument is provided it defaults to fdtdump.dtb.  This then allows
further post processing on the machine running GDB.  The fdt header is
also also printed in the GDB console.  For example:

  (gdb) lx-fdtdump
  fdt_magic:         0xD00DFEED
  fdt_totalsize:     0xC108
  off_dt_struct:     0x38
  off_dt_strings:    0x3804
  off_mem_rsvmap:    0x28
  version:           17
  last_comp_version: 16
  Dumped fdt to fdtdump.dtb

  >fdtdump fdtdump.dtb | less

This command is useful as the bootloader can often re-write parts of the
device tree, and this can sometimes cause the kernel to not boot.

Link: http://lkml.kernel.org/r/1481280065-5336-2-git-send-email-kbingham@kernel.orgSigned-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Kieran Bingham <kbingham@kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As of commit bf3eac84 ("percpu-rwsem: kill CONFIG_PERCPU_RWSEM") we
unconditionally build pcpu-rwsems.  Remove a leftover in for
FILE_LOCKING.

Link: http://lkml.kernel.org/r/20170518180115.2794-1-dave@stgolabs.netSigned-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mount fails if file system image has empty files because of sanity check
while reading superblock.  For empty files disk offset to end of file
(i_eoffset) is cpu_to_le32(-1).  Sanity check comparison, which compares
disk offset with file system size isn't valid for this value and hence
is ignored with this patch.

Steps to reproduce:

  $  dd if=/dev/zero of=bfs-image count=204800
  $  mkfs.bfs bfs-image
  $  mkdir bfs-mount-point
  $  sudo mount -t bfs -o loop bfs-image bfs-mount-point/
  $  cd bfs-mount-point/
  $  sudo touch a
  $  cd ..
  $  sudo umount bfs-mount-point/
  $  sudo mount -t bfs -o loop bfs-image bfs-mount-point/
  mount: /dev/loop0: can't read superblock

  $  dmesg
  [25526.689580] BFS-fs: bfs_fill_super(): Inode 0x00000003 corrupted

Tigran said:
 "If you had created the filesystem with the proper mkfs under SCO
  UnixWare 7 you (probably) wouldn't encounter this issue. But since
  commercial Unix-es are now part of history and the only proper way is
  the Linux mkfs.bfs utility, your patch is fine"

Link: http://lkml.kernel.org/r/20170505201625.GA3097@hercules.tuxera.comSigned-off-by: Rakesh Pandit <rakesh@tuxera.com>
Acked-by: Tigran Aivazian <aivazian.tigran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The add_device_randomness() function would ignore incoming bytes if the
crng wasn't ready.  This additionally makes sure to make an early enough
call to add_latent_entropy() to influence the initial stack canary,
which is especially important on non-x86 systems where it stays the same
through the life of the boot.

Link: http://lkml.kernel.org/r/20170626233038.GA48751@beastSigned-off-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prevent use of uninitialized memory (originating from the stack frame of
do_sysctl()) by verifying that the name array is filled with sufficient
input data before comparing its specific entries with integer constants.

Through timing measurement or analyzing the kernel debug logs, a
user-mode program could potentially infer the results of comparisons
against the uninitialized memory, and acquire some (very limited)
information about the state of the kernel stack.  The change also
eliminates possible future warnings by tools such as KMSAN and other
code checkers / instrumentations.

Link: http://lkml.kernel.org/r/20170524122139.21333-1-mjurczyk@google.comSigned-off-by: Mateusz Jurczyk <mjurczyk@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a few initial respective tests for an array:

  o Echoing values separated by spaces works
  o Echoing only first elements will set first elements
  o Confirm PAGE_SIZE limit still applies even if an array is used

Link: http://lkml.kernel.org/r/20170630224431.17374-7-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Test against a simple proc_douintvec() case.  While at it, add a test
against UINT_MAX.  Make sure UINT_MAX works, and UINT_MAX+1 will fail
and that negative values are not accepted.

Link: http://lkml.kernel.org/r/20170630224431.17374-6-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Test against a simple proc_dointvec() case.  While at it, add a test
against INT_MAX.  Make sure INT_MAX works, and INT_MAX+1 will fail.
Also test negative values work.

Link: http://lkml.kernel.org/r/20170630224431.17374-5-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add the following tests to ensure we do not regress:

  o Test using a buffer full of space (PAGE_SIZE-1) followed by a
    single digit works

  o Test using a buffer full of spaces (PAGE_SIZE or over) will fail

As tests increase instead of unloading the module and reloading it we
can just do a shell reset_vals() with a reset to values we know are set
at init on the driver.

Link: http://lkml.kernel.org/r/20170630224431.17374-4-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds a generic script to let us more easily add more tests cases.
Since we really have only two types of tests cases just fold them into
the one file.  Each test unit is now identified into its separate
function:

    # ./sysctl.sh -l
  Test ID list:

  TEST_ID x NUM_TEST
  TEST_ID:   Test ID
  NUM_TESTS: Number of recommended times to run the test

  0001 x 1 - tests proc_dointvec_minmax()
  0002 x 1 - tests proc_dostring()

For now we start off with what we had before, and run only each test
once.  We can now watch a test case until it fails:

  ./sysctl.sh -w 0002

We can also run a test case x number of times, say we want to run a test
case 100 times:

  ./sysctl.sh -c 0001 100

To run a test case only once, for example:

  ./sysctl.sh -s 0002

The default settings are specified at the top of sysctl.sh.

Link: http://lkml.kernel.org/r/20170630224431.17374-3-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The existing tools/testing/selftests/sysctl/ tests include two test
cases, but these use existing production kernel sysctl interfaces.  We
want to expand test coverage but we can't just be looking for random
safe production values to poke at, that's just insane!

Instead just dedicate a test driver for debugging purposes and port the
existing scripts to use it.  This will make it easier for further tests
to be added.

Subsequent patches will extend our test coverage for sysctl.

The stress test driver uses a new license (GPL on Linux, copyleft-next
outside of Linux).  Linus was fine with this [0] and later due to Ted's
and Alans's request ironed out an "or" language clause to use [1] which
is already present upstream.

[0] https://lkml.kernel.org/r/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com
[1] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com

Link: http://lkml.kernel.org/r/20170630224431.17374-2-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To keep parity with regular int interfaces provide the an unsigned int
proc_douintvec_minmax() which allows you to specify a range of allowed
valid numbers.

Adding proc_douintvec_minmax_sysadmin() is easy but we can wait for an
actual user for that.

Link: http://lkml.kernel.org/r/20170519033554.18592-6-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e7d316a0 ("sysctl: handle error writing UINT_MAX to u32
fields") added proc_douintvec() to start help adding support for
unsigned int, this however was only half the work needed.  Two fixes
have come in since then for the following issues:

  o Printing the values shows a negative value, this happens since
    do_proc_dointvec() and this uses proc_put_long()

This was fixed by commit 5380e564 ("sysctl: don't print negative
flag for proc_douintvec").

  o We can easily wrap around the int values: UINT_MAX is 4294967295, if
    we echo in 4294967295 + 1 we end up with 0, using 4294967295 + 2 we
    end up with 1.
  o We echo negative values in and they are accepted

This was fixed by commit 425fffd8 ("sysctl: report EINVAL if value
is larger than UINT_MAX for proc_douintvec").

It still also failed to be added to sysctl_check_table()...  instead of
adding it with the current implementation just provide a proper and
simplified unsigned int support without any array unsigned int support
with no negative support at all.

Historically sysctl proc helpers have supported arrays, due to the
complexity this adds though we've taken a step back to evaluate array
users to determine if its worth upkeeping for unsigned int.  An
evaluation using Coccinelle has been done to perform a grammatical
search to ask ourselves:

  o How many sysctl proc_dointvec() (int) users exist which likely
    should be moved over to proc_douintvec() (unsigned int) ?
	Answer: about 8
	- Of these how many are array users ?
		Answer: Probably only 1
  o How many sysctl array users exist ?
	Answer: about 12

This last question gives us an idea just how popular arrays: they are not.
Array support should probably just be kept for strings.

The identified uint ports are:

  drivers/infiniband/core/ucma.c - max_backlog
  drivers/infiniband/core/iwcm.c - default_backlog
  net/core/sysctl_net_core.c - rps_sock_flow_sysctl()
  net/netfilter/nf_conntrack_timestamp.c - nf_conntrack_timestamp -- bool
  net/netfilter/nf_conntrack_acct.c nf_conntrack_acct -- bool
  net/netfilter/nf_conntrack_ecache.c - nf_conntrack_events -- bool
  net/netfilter/nf_conntrack_helper.c - nf_conntrack_helper -- bool
  net/phonet/sysctl.c proc_local_port_range()

The only possible array users is proc_local_port_range() but it does not
seem worth it to add array support just for this given the range support
works just as well.  Unsigned int support should be desirable more for
when you *need* more than INT_MAX or using int min/max support then does
not suffice for your ranges.

If you forget and by mistake happen to register an unsigned int proc
entry with an array, the driver will fail and you will get something as
follows:

sysctl table check failed: debug/test_sysctl//uint_0002 array now allowed
CPU: 2 PID: 1342 Comm: modprobe Tainted: G        W   E <etc>
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS <etc>
Call Trace:
 dump_stack+0x63/0x81
 __register_sysctl_table+0x350/0x650
 ? kmem_cache_alloc_trace+0x107/0x240
 __register_sysctl_paths+0x1b3/0x1e0
 ? 0xffffffffc005f000
 register_sysctl_table+0x1f/0x30
 test_sysctl_init+0x10/0x1000 [test_sysctl]
 do_one_initcall+0x52/0x1a0
 ? kmem_cache_alloc_trace+0x107/0x240
 do_init_module+0x5f/0x200
 load_module+0x1867/0x1bd0
 ? __symbol_put+0x60/0x60
 SYSC_finit_module+0xdf/0x110
 SyS_finit_module+0xe/0x10
 entry_SYSCALL_64_fastpath+0x1e/0xad
RIP: 0033:0x7f042b22d119
<etc>

Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields")
Link: http://lkml.kernel.org/r/20170519033554.18592-5-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Liping Zhang <zlpnobody@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The mode sysctl_writes_strict positional checks keep being copy and pasted
as we add new proc handlers.  Just add a helper to avoid code duplication.

Link: http://lkml.kernel.org/r/20170519033554.18592-4-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Document the different sysctl_writes_strict modes in code.

Link: http://lkml.kernel.org/r/20170519033554.18592-3-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "sysctl: few fixes", v5.

I've been working on making kmod more deterministic, and as I did that I
couldn't help but notice a few issues with sysctl.  My end goal was just
to fix unsigned int support, which back then was completely broken.
Liping Zhang has sent up small atomic fixes, however it still missed yet
one more fix and Alexey Dobriyan had also suggested to just drop array
support given its complexity.

I have inspected array support using Coccinelle and indeed its not that
popular, so if in fact we can avoid it for new interfaces, I agree its
best.

I did develop a sysctl stress driver but will hold that off for another
series.

This patch (of 5):

Commit 7c60c48f ("sysctl: Improve the sysctl sanity checks")
improved sanity checks considerbly, however the enhancements on
sysctl_check_table() meant adding a functional change so that only the
last table entry's sanity error is propagated.  It also changed the way
errors were propagated so that each new check reset the err value, this
means only last sanity check computed is used for an error.  This has
been in the kernel since v3.4 days.

Fix this by carrying on errors from previous checks and iterations as we
traverse the table and ensuring we keep any error from previous checks.
We keep iterating on the table even if an error is found so we can
complain for all errors found in one shot.  This works as -EINVAL is
always returned on error anyway, and the check for error is any non-zero
value.

Fixes: 7c60c48f ("sysctl: Improve the sysctl sanity checks")
Link: http://lkml.kernel.org/r/20170519033554.18592-2-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Minor updates in Documentation for arm64 as relocatable kernel.  Also
this patch updates documentation for using uncompressed image "Image"
which is used for ARM64.

Link: http://lkml.kernel.org/r/1495104793-6563-1-git-send-email-Bharat.Bhushan@nxp.comSigned-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Pratyush Anand <panand@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently vmcoreinfo data is updated at boot time subsys_initcall(), it
has the risk of being modified by some wrong code during system is
running.

As a result, vmcore dumped may contain the wrong vmcoreinfo.  Later on,
when using "crash", "makedumpfile", etc utility to parse this vmcore, we
probably will get "Segmentation fault" or other unexpected errors.

E.g.  1) wrong code overwrites vmcoreinfo_data; 2) further crashes the
system; 3) trigger kdump, then we obviously will fail to recognize the
crash context correctly due to the corrupted vmcoreinfo.

Now except for vmcoreinfo, all the crash data is well
protected(including the cpu note which is fully updated in the crash
path, thus its correctness is guaranteed).  Given that vmcoreinfo data
is a large chunk prepared for kdump, we better protect it as well.

To solve this, we relocate and copy vmcoreinfo_data to the crash memory
when kdump is loading via kexec syscalls.  Because the whole crash
memory will be protected by existing arch_kexec_protect_crashkres()
mechanism, we naturally protect vmcoreinfo_data from write(even read)
access under kernel direct mapping after kdump is loaded.

Since kdump is usually loaded at the very early stage after boot, we can
trust the correctness of the vmcoreinfo data copied.

On the other hand, we still need to operate the vmcoreinfo safe copy
when crash happens to generate vmcoreinfo_note again, we rely on vmap()
to map out a new kernel virtual address and update to use this new one
instead in the following crash_save_vmcoreinfo().

BTW, we do not touch vmcoreinfo_note, because it will be fully updated
using the protected vmcoreinfo_data after crash which is surely correct
just like the cpu crash note.

Link: http://lkml.kernel.org/r/1493281021-20737-3-git-send-email-xlpang@redhat.comSigned-off-by: Xunlei Pang <xlpang@redhat.com>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmcoreinfo_max_size stands for the vmcoreinfo_data, the correct one we
should use is vmcoreinfo_note whose total size is VMCOREINFO_NOTE_SIZE.

Like explained in commit 77019967 ("kdump: fix exported size of
vmcoreinfo note"), it should not affect the actual function, but we
better fix it, also this change should be safe and backward compatible.

After this, we can get rid of variable vmcoreinfo_max_size, let's use
the corresponding macros directly, fewer variables means more safety for
vmcoreinfo operation.

[xlpang@redhat.com: fix build warning]
  Link: http://lkml.kernel.org/r/1494830606-27736-1-git-send-email-xlpang@redhat.com
Link: http://lkml.kernel.org/r/1493281021-20737-2-git-send-email-xlpang@redhat.comSigned-off-by: Xunlei Pang <xlpang@redhat.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As Eric said,
 "what we need to do is move the variable vmcoreinfo_note out of the
  kernel's .bss section. And modify the code to regenerate and keep this
  information in something like the control page.

  Definitely something like this needs a page all to itself, and ideally
  far away from any other kernel data structures. I clearly was not
  watching closely the data someone decided to keep this silly thing in
  the kernel's .bss section."

This patch allocates extra pages for these vmcoreinfo_XXX variables, one
advantage is that it enhances some safety of vmcoreinfo, because
vmcoreinfo now is kept far away from other kernel data structures.

Link: http://lkml.kernel.org/r/1493281021-20737-1-git-send-email-xlpang@redhat.comSigned-off-by: Xunlei Pang <xlpang@redhat.com>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The reason to disable interrupts seems to be to avoid switching to a
different processor while handling per cpu data using individual loads and
stores.  If we use per cpu RMV primitives we will not have to disable
interrupts.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705171055130.5898@east.gentwo.orgSigned-off-by: Christoph Lameter <cl@linux.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With gcc 4.1.2:

    mm/memory.o: In function `create_huge_pmd':
    memory.c:(.text+0x93e): undefined reference to `do_huge_pmd_anonymous_page'

Interestingly, create_huge_pmd() is emitted in the assembler output, but
never called.

Converting transparent_hugepage_enabled() from a macro to a static
inline function reduced the ability of the compiler to remove unused
code.

Fix this by marking create_huge_pmd() inline.

Fixes: 16981d76 ("mm: improve readability of transparent_hugepage_enabled()")
Link: http://lkml.kernel.org/r/1499842660-10665-1-git-send-email-geert@linux-m68k.orgSigned-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the first parameter of container_of() is a pointer to a
non-const-qualified array type (and the third parameter names a
non-const-qualified array member), the local variable __mptr will be
defined with a const-qualified array type.  In ISO C, these types are
incompatible.  They work as expected in GNU C, but some versions will
issue warnings.  For example, GCC 4.9 produces the warning
"initialization from incompatible pointer type".

Here is an example of where the problem occurs:

-------------------------------------------------------
   #include <linux/kernel.h>
   #include <linux/module.h>

  MODULE_LICENSE("GPL");

  struct st {
  	int a;
  	char b[16];
  };

  static int __init example_init(void) {
  	struct st t = { .a = 101, .b = "hello" };
  	char (*p)[16] = &t.b;
  	struct st *x = container_of(p, struct st, b);
  	printk(KERN_DEBUG "%p %p\n", (void *)&t, (void *)x);
  	return 0;
  }

  static void __exit example_exit(void) {
  }

  module_init(example_init);
  module_exit(example_exit);
-------------------------------------------------------

Building the module with gcc-4.9 results in these warnings (where '{m}'
is the module source and '{k}' is the kernel source):

-------------------------------------------------------
  In file included from {m}/example.c:1:0:
  {m}/example.c: In function `example_init':
  {k}/include/linux/kernel.h:854:48: warning: initialization from incompatible pointer type
    const typeof( ((type *)0)->member ) *__mptr = (ptr); \
                                                  ^
  {m}/example.c:14:17: note: in expansion of macro `container_of'
    struct st *x = container_of(p, struct st, b);
                   ^
  {k}/include/linux/kernel.h:854:48: warning: (near initialization for `x')
    const typeof( ((type *)0)->member ) *__mptr = (ptr); \
                                                  ^
  {m}/example.c:14:17: note: in expansion of macro `container_of'
    struct st *x = container_of(p, struct st, b);
                   ^
-------------------------------------------------------

Replace the type checking performed by the macro to avoid these
warnings.  Make sure `*(ptr)` either has type compatible with the
member, or has type compatible with `void`, ignoring qualifiers.  Raise
compiler errors if this is not true.  This is stronger than the previous
behaviour, which only resulted in compiler warnings for a type mismatch.

[arnd@arndb.de: fix new warnings for container_of()]
  Link: http://lkml.kernel.org/r/20170620200940.90557-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170525120316.24473-7-abbotti@mev.co.ukSigned-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"kernel.h: handle pointers to arrays better in container_of()" triggers:

In file included from include/uapi/linux/stddef.h:1:0,
                 from include/linux/stddef.h:4,
                 from include/uapi/linux/posix_types.h:4,
                 from include/uapi/linux/types.h:13,
                 from include/linux/types.h:5,
                 from include/linux/syscalls.h:71,
                 from fs/dcache.c:17:
fs/dcache.c: In function 'release_dentry_name_snapshot':
include/linux/compiler.h:542:38: error: call to '__compiletime_assert_305' declared with attribute error: pointer type mismatch in container_of()
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
                                      ^
include/linux/compiler.h:525:4: note: in definition of macro '__compiletime_assert'
    prefix ## suffix();    \
    ^
include/linux/compiler.h:542:2: note: in expansion of macro '_compiletime_assert'
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
  ^
include/linux/build_bug.h:46:37: note: in expansion of macro 'compiletime_assert'
 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^
include/linux/kernel.h:860:2: note: in expansion of macro 'BUILD_BUG_ON_MSG'
  BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \
  ^
fs/dcache.c:305:7: note: in expansion of macro 'container_of'
   p = container_of(name->name, struct external_name, name[0]);

Switch name_snapshot to use unsigned chars, matching struct qstr and
struct external_name.

Link: http://lkml.kernel.org/r/20170710152134.0f78c1e6@canb.auug.org.auSigned-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c updates from Wolfram Sang:
 "This pull request contains:

   - i2c core reorganization. One source file became too monolithic. It
     is now split up, yet we still have the same named object as the
     final output. This should ease maintenance.

   - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX

   - designware driver gained slave mode support

   - xgene-slimpro driver gained ACPI support

   - bigger overhaul for pca-platform driver

   - the algo-bit module now supports messages with enforced STOP

   - slightly bigger than usual set of driver updates and improvements

  and with much appreciated quality assurance from Andy Shevchenko"

* 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
  i2c: Provide a stub for i2c_detect_slave_mode()
  i2c: designware: Let slave adapter support be optional
  i2c: designware: Make HW init functions static
  i2c: designware: fix spelling mistakes
  i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus
  i2c: pca-platform: correctly set algo_data.reset_chip
  i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices
  i2c: designware: enable SLAVE in platform module
  i2c: designware: add SLAVE mode functions
  i2c: zx2967: drop COMPILE_TEST dependency
  i2c: zx2967: always use the same device when printing errors
  i2c: pca-platform: use dev_warn/dev_info instead of printk
  i2c: pca-platform: use device managed allocations
  i2c: pca-platform: add devicetree awareness
  i2c: pca-platform: switch to struct gpio_desc
  dt-bindings: add bindings for i2c-pca-platform
  i2c: cadance: fix ctrl/addr reg write order
  i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family i2c controller
  i2c: algo-bit: add support for I2C_M_STOP
  ...

Pull IOMMU updates from Joerg Roedel:
 "This update comes with:

   - Support for lockless operation in the ARM io-pgtable code.

     This is an important step to solve the scalability problems in the
     common dma-iommu code for ARM

   - Some Errata workarounds for ARM SMMU implemenations

   - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver.

     The code suffered from very high flush rates, with the new
     implementation the flush rate is down to ~1% of what it was before

   - Support for amd_iommu=off when booting with kexec.

     The problem here was that the IOMMU driver bailed out early without
     disabling the iommu hardware, if it was enabled in the old kernel

   - The Rockchip IOMMU driver is now available on ARM64

   - Align the return value of the iommu_ops->device_group call-backs to
     not miss error values

   - Preempt-disable optimizations in the Intel VT-d and common IOVA
     code to help Linux-RT

   - Various other small cleanups and fixes"

* tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
  iommu/vt-d: Constify intel_dma_ops
  iommu: Warn once when device_group callback returns NULL
  iommu/omap: Return ERR_PTR in device_group call-back
  iommu: Return ERR_PTR() values from device_group call-backs
  iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device()
  iommu/vt-d: Don't disable preemption while accessing deferred_flush()
  iommu/iova: Don't disable preempt around this_cpu_ptr()
  iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126
  iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701)
  iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74
  ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model
  iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions
  iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table
  iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE
  iommu/arm-smmu-v3: Remove io-pgtable spinlock
  iommu/arm-smmu: Remove io-pgtable spinlock
  iommu/io-pgtable-arm-v7s: Support lockless operation
  iommu/io-pgtable-arm: Support lockless operation
  iommu/io-pgtable: Introduce explicit coherency
  iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap
  ...

Pull overlayfs updates from Miklos Szeredi:
 "This work from Amir introduces the inodes index feature, which
  provides:

   - hardlinks are not broken on copy up

   - infrastructure for overlayfs NFS export

  This also fixes constant st_ino for samefs case for lower hardlinks"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (33 commits)
  ovl: mark parent impure and restore timestamp on ovl_link_up()
  ovl: document copying layers restrictions with inodes index
  ovl: cleanup orphan index entries
  ovl: persistent overlay inode nlink for indexed inodes
  ovl: implement index dir copy up
  ovl: move copy up lock out
  ovl: rearrange copy up
  ovl: add flag for upper in ovl_entry
  ovl: use struct copy_up_ctx as function argument
  ovl: base tmpfile in workdir too
  ovl: factor out ovl_copy_up_inode() helper
  ovl: extract helper to get temp file in copy up
  ovl: defer upper dir lock to tempfile link
  ovl: hash overlay non-dir inodes by copy up origin
  ovl: cleanup bad and stale index entries on mount
  ovl: lookup index entry for copy up origin
  ovl: verify index dir matches upper dir
  ovl: verify upper root dir matches lower root dir
  ovl: introduce the inodes index dir feature
  ovl: generalize ovl_create_workdir()
  ...

Reported-and-tested-by: Meelis Roos <mroos@linux.ee>
Fixes: commit d9e968cb "getrlimit()/setrlimit(): move compat to native"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sparc fixes from David Miller:

 - Fix symbol version generation for assembler on sparc, from
   Nagarathnam Muthusamy.

 - Fix compound page handling in gup_huge_pmd(), from Nitin Gupta.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix gup_huge_pmd
  Adding the type of exported symbols
  sed regex in Makefile.build requires line break between exported symbols
  Adding asm-prototypes.h for genksyms to generate crc

Pull more block updates from Jens Axboe:
 "This is a followup for block changes, that didn't make the initial
  pull request. It's a bit of a mixed bag, this contains:

   - A followup pull request from Sagi for NVMe. Outside of fixups for
     NVMe, it also includes a series for ensuring that we properly
     quiesce hardware queues when browsing live tags.

   - Set of integrity fixes from Dmitry (mostly), fixing various issues
     for folks using DIF/DIX.

   - Fix for a bug introduced in cciss, with the req init changes. From
     Christoph.

   - Fix for a bug in BFQ, from Paolo.

   - Two followup fixes for lightnvm/pblk from Javier.

   - Depth fix from Ming for blk-mq-sched.

   - Also from Ming, performance fix for mtip32xx that was introduced
     with the dynamic initialization of commands"

* 'for-linus' of git://git.kernel.dk/linux-block: (44 commits)
  block: call bio_uninit in bio_endio
  nvmet: avoid unneeded assignment of submit_bio return value
  nvme-pci: add module parameter for io queue depth
  nvme-pci: compile warnings in nvme_alloc_host_mem()
  nvmet_fc: Accept variable pad lengths on Create Association LS
  nvme_fc/nvmet_fc: revise Create Association descriptor length
  lightnvm: pblk: remove unnecessary checks
  lightnvm: pblk: control I/O flow also on tear down
  cciss: initialize struct scsi_req
  null_blk: fix error flow for shared tags during module_init
  block: Fix __blkdev_issue_zeroout loop
  nvme-rdma: unconditionally recycle the request mr
  nvme: split nvme_uninit_ctrl into stop and uninit
  virtio_blk: quiesce/unquiesce live IO when entering PM states
  mtip32xx: quiesce request queues to make sure no submissions are inflight
  nbd: quiesce request queues to make sure no submissions are inflight
  nvme: kick requeue list when requeueing a request instead of when starting the queues
  nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues
  nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues
  nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues
  ...

Pull cifs fixes and sane default from Steve French:
 "Upgrade default dialect to more secure SMB3 from older cifs dialect"

* tag 'smb3-security-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Clean up unused variables in smb2pdu.c
  [SMB3] Improve security, move default dialect to SMB3 from old CIFS
  [SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred
  CIFS: Reconnect expired SMB sessions
  CIFS: Display SMB2 error codes in the hex format
  cifs: Use smb 2 - 3 and cifsacl mount options setacl function
  cifs: prototype declaration and definition to set acl for smb 2 - 3 and cifsacl mount options

Pull ceph updates from Ilya Dryomov:
 "The main item here is support for v12.y.z ("Luminous") clusters:
  RESEND_ON_SPLIT, RADOS_BACKOFF, OSDMAP_PG_UPMAP and CRUSH_CHOOSE_ARGS
  feature bits, and various other changes in the RADOS client protocol.

  On top of that we have a new fsc mount option to allow supplying
  fscache uniquifier (similar to NFS) and the usual pile of filesystem
  fixes from Zheng"

* tag 'ceph-for-4.13-rc1' of git://github.com/ceph/ceph-client: (44 commits)
  libceph: advertise support for NEW_OSDOP_ENCODING and SERVER_LUMINOUS
  libceph: osd_state is 32 bits wide in luminous
  crush: remove an obsolete comment
  crush: crush_init_workspace starts with struct crush_work
  libceph, crush: per-pool crush_choose_arg_map for crush_do_rule()
  crush: implement weight and id overrides for straw2
  libceph: apply_upmap()
  libceph: compute actual pgid in ceph_pg_to_up_acting_osds()
  libceph: pg_upmap[_items] infrastructure
  libceph: ceph_decode_skip_* helpers
  libceph: kill __{insert,lookup,remove}_pg_mapping()
  libceph: introduce and switch to decode_pg_mapping()
  libceph: don't pass pgid by value
  libceph: respect RADOS_BACKOFF backoffs
  libceph: make DEFINE_RB_* helpers more general
  libceph: avoid unnecessary pi lookups in calc_target()
  libceph: use target pi for calc_target() calculations
  libceph: always populate t->target_{oid,oloc} in calc_target()
  libceph: make sure need_resend targets reflect latest map
  libceph: delete from need_resend_linger before check_linger_pool_dne()
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - Add Renesas RZ/A WDT Watchdog driver

 - STM32 Independent WatchDoG (IWDG) support

 - UniPhier watchdog support

 - Add F71868 support

 - Add support for NCT6793D and NCT6795D

 - dw_wdt: add reset lines support

 - core: add option to avoid early handling of watchdog

 - core: introduce watchdog_worker_should_ping helper

 - Cleanups and improvements for sama5d4, intel-mid_wdt, s3c2410_wdt,
   orion_wdt, gpio_wdt, it87_wdt, meson_wdt, davinci_wdt, bcm47xx_wdt,
   zx2967_wdt, cadence_wdt

* git://www.linux-watchdog.org/linux-watchdog: (32 commits)
  watchdog: introduce watchdog_worker_should_ping helper
  watchdog: uniphier: add UniPhier watchdog driver
  dt-bindings: watchdog: add description for UniPhier WDT controller
  watchdog: cadence_wdt: make of_device_ids const.
  watchdog: zx2967: constify zx2967_wdt_ops.
  watchdog: bcm47xx_wdt: constify bcm47xx_wdt_hard_ops and bcm47xx_wdt_soft_ops
  watchdog: davinci: Add missing clk_disable_unprepare().
  watchdog: davinci: Handle return value of clk_prepare_enable
  watchdog: meson: Handle return value of clk_prepare_enable
  watchdog: it87: Add support for various Super-IO chips
  watchdog: it87: Use infrastructure to stop watchdog on reboot
  watchdog: it87: Drop support for resetting watchdog though CIR and Game port
  watchdog: it87: Convert to use watchdog core infrastructure
  watchdog: it87: Drop FSF mailing address
  watchdog: dw_wdt: get reset lines from dt
  watchdog: bindings: dw_wdt: add reset lines
  watchdog: w83627hf: Add support for NCT6793D and NCT6795D
  watchdog: core: add option to avoid early handling of watchdog
  watchdog: f71808e_wdt: Add F71868 support
  watchdog: Add STM32 IWDG driver
  ...

Merge tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:
 "Changes in this pull request are around catching up cros_ec with the
  internal chromeos-kernel versions of cros_ec, cros_ec_lpc, and
  cros_ec_lightbar.

  Also, switching maintainership from olof to bleung"

* tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome : Add myself as Maintainer
  platform/chrome: cros_ec_lightbar - hide unused PM functions
  cros_ec: Don't signal wake event for non-wake host events
  cros_ec: Fix deadlock when EC is not responsive at probe
  cros_ec: Don't return error when checking command version
  platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend
  platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC
  platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence
  platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs
  platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI
  platform/chrome: cros_ec_lpc: Add power management ops
  platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device
  platform/chrome: cros_ec_lpc: Add support for mec1322 EC
  platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants
  mfd: cros_ec: Add support for dumping panic information
  cros_ec_debugfs: Pass proper struct sizes to cros_ec_cmd_xfer()
  mfd: cros_ec: add debugfs, console log file
  mfd: cros_ec: Add EC console read structures definitions
  mfd: cros_ec: Add helper for event notifier.

Pull x86nommu update from Greg Ungerer:
 "Only a single change, to remove old Kconfig options from defconfigs"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: defconfig: Cleanup from old Kconfig options

Merge more updates from Andrew Morton:

 - most of the rest of MM

 - KASAN updates

 - lib/ updates

 - checkpatch updates

 - some binfmt_elf changes

 - various misc bits

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (115 commits)
  kernel/exit.c: avoid undefined behaviour when calling wait4()
  kernel/signal.c: avoid undefined behaviour in kill_something_info
  binfmt_elf: safely increment argv pointers
  s390: reduce ELF_ET_DYN_BASE
  powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
  arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
  arm: move ELF_ET_DYN_BASE to 4MB
  binfmt_elf: use ELF_ET_DYN_BASE only for PIE
  fs, epoll: short circuit fetching events if thread has been killed
  checkpatch: improve multi-line alignment test
  checkpatch: improve macro reuse test
  checkpatch: change format of --color argument to --color[=WHEN]
  checkpatch: silence perl 5.26.0 unescaped left brace warnings
  checkpatch: improve tests for multiple line function definitions
  checkpatch: remove false warning for commit reference
  checkpatch: fix stepping through statements with $stat and ctx_statement_block
  checkpatch: [HLP]LIST_HEAD is also declaration
  checkpatch: warn when a MAINTAINERS entry isn't [A-Z]:\t
  checkpatch: improve the unnecessary OOM message test
  lib/bsearch.c: micro-optimize pivot position calculation
  ...

wait4(-2147483648, 0x20, 0, 0xdd0000) triggers:
UBSAN: Undefined behaviour in kernel/exit.c:1651:9

The related calltrace is as follows:

  negation of -2147483648 cannot be represented in type 'int':
  CPU: 9 PID: 16482 Comm: zj Tainted: G    B          ---- -------   3.10.0-327.53.58.71.x86_64+ #66
  Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA              , BIOS CTSAV036 04/27/2011
  Call Trace:
    dump_stack+0x19/0x1b
    ubsan_epilogue+0xd/0x50
    __ubsan_handle_negate_overflow+0x109/0x14e
    SyS_wait4+0x1cb/0x1e0
    system_call_fastpath+0x16/0x1b

Exclude the overflow to avoid the UBSAN warning.

Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.comSigned-off-by: zhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>