- 18 Apr, 2023 40 commits
-
-
ZhangPeng authored
Using vma_lookup() verifies the address is contained in the found vma. This results in easier to read the code. Link: https://lkml.kernel.org/r/20230404094515.1883552-1-zhangpeng362@huawei.comSigned-off-by:
ZhangPeng <zhangpeng362@huawei.com> Reviewed-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Florian Schmidt authored
cgroups v1 has a unique way of setting up memory pressure notifications: the user opens "memory.pressure_level" of the cgroup they want to monitor for pressure, then open "cgroup.event_control" and write the fd (among other things) to that file. memory.pressure_level has no other use, specifically it does not support any read or write operations. Consequently, no handlers are provided, and cgroup_file_mode() sets the permissions to 000. However, to actually use the mechanism, the subscribing user must have read access to the file and open the fd for reading, see memcg_write_event_control(). This is all fine as long as the subscribing process runs as root and is otherwise unconfined by further restrictions. However, if you add strict access controls such as selinux, the permission bits will be enforced, and opening memory.pressure_level for reading will fail, preventing the process from subscribing, even as root. To work around this issue, introduce a dummy read handler. When memory.pressure_level is created, cgroup_file_mode() will notice the existence of a handler, and therefore add read permissions to the file. Link: https://lkml.kernel.org/r/20230404105900.2005-1-flosch@nutanix.comSigned-off-by:
Florian Schmidt <flosch@nutanix.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by:
-
David Stevens authored
Make sure that collapse_file doesn't interfere with checking the uptodate flag in the page cache by only inserting hpage into the page cache after it has been updated and marked uptodate. This is achieved by simply not replacing present pages with hpage when iterating over the target range. The present pages are already locked, so replacing them with the locked hpage before the collapse is finalized is unnecessary. However, it is necessary to stop freezing the present pages after validating them, since leaving long-term frozen pages in the page cache can lead to deadlocks. Simply checking the reference count is sufficient to ensure that there are no long-term references hanging around that would the collapse would break. Similar to hpage, there is no reason that the present pages actually need to be frozen in addition to being locked. This fixes a race where folio_seek_hole_data would mistake hpage for an fallocated but unwritten page. This race is visible to userspace via data temporarily disappearing from SEEK_DATA/SEEK_HOLE. This also fixes a similar race where pages could temporarily disappear from mincore. Link: https://lkml.kernel.org/r/20230404120117.2562166-5-stevensd@google.com Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
David Stevens <stevensd@chromium.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by:
-
David Stevens authored
Make sure that collapse_file respects any userfaultfds registered with MODE_MISSING. If userspace has any such userfaultfds registered, then for any page which it knows to be missing, it may expect a UFFD_EVENT_PAGEFAULT. This means collapse_file needs to be careful when collapsing a shmem range would result in replacing an empty page with a THP, to avoid breaking userfaultfd. Synchronization when checking for userfaultfds in collapse_file is tricky because the mmap locks can't be used to prevent races with the registration of new userfaultfds. Instead, we provide synchronization by ensuring that userspace cannot observe the fact that pages are missing before we check for userfaultfds. Although this allows registration of a userfaultfd to race with collapse_file, it ensures that userspace cannot observe any pages transition from missing to present after such a race occurs. This makes such a race indistinguishable to the collapse occurring immediately before the userfaultfd registration. The first step to provide this synchronization is to stop filling gaps during the loop iterating over the target range, since the page cache lock can be dropped during that loop. The second step is to fill the gaps with XA_RETRY_ENTRY after the page cache lock is acquired the final time, to avoid races with accesses to the page cache that only take the RCU read lock. The fact that we don't fill holes during the initial iteration means that collapse_file now has to handle faults occurring during the collapse. This is done by re-validating the number of missing pages after acquiring the page cache lock for the final time. This fix is targeted at khugepaged, but the change also applies to MADV_COLLAPSE. MADV_COLLAPSE on a range with a userfaultfd will now return EBUSY if there are any missing pages (instead of succeeding on shmem and returning EINVAL on anonymous memory). There is also now a window during MADV_COLLAPSE where a fault on a missing page will cause the syscall to fail with EAGAIN. The fact that intermediate page cache state can no longer be observed before the rollback of a failed collapse is also technically a userspace-visible change (via at least SEEK_DATA and SEEK_END), but it is exceedingly unlikely that anything relies on being able to observe that transient state. Link: https://lkml.kernel.org/r/20230404120117.2562166-4-stevensd@google.comSigned-off-by:
Peter Xu <peterx@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by:
-
David Stevens authored
Add a rollback label to deal with failure, instead of continuously checking for RESULT_SUCCESS, to make it easier to add more failure cases. The refactoring also allows the collapse_file tracepoint to include hpage on success (instead of NULL). Link: https://lkml.kernel.org/r/20230404120117.2562166-3-stevensd@google.comSigned-off-by:
Yang Shi <shy828301@gmail.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
David Stevens authored
Patch series "mm/khugepaged: fixes for khugepaged+shmem", v6. This series reworks collapse_file so that the intermediate state of the collapse does not leak out of collapse_file. Although this makes collapse_file a bit more complicated, it means that the rest of the kernel doesn't have to deal with the unusual state. This directly fixes races with both lseek and mincore. This series also fixes the fact that khugepaged completely breaks userfaultfd+shmem. The rework of collapse_file provides a convenient place to check for registered userfaultfds without making the shmem userfaultfd implementation care about khugepaged. Finally, this series adds a lru_add_drain after swapping in shmem pages, which makes the subsequent folio_isolate_lru significantly more likely to succeed. This patch (of 4): Call lru_add_drain after swapping in shmem pages so that isolate_lru_page is more likely to succeed. Link: https://lkml.kernel.org/r/20230404120117.2562166-1-stevensd@google.com Link: https://lkml.kernel.org/r/20230404120117.2562166-2-stevensd@google.comSigned-off-by:
-
Jiaqi Yan authored
Make collapse_file roll back when copying pages failed. More concretely: - extract copying operations into a separate loop - postpone the updates for nr_none until both scanning and copying succeeded - postpone joining small xarray entries until both scanning and copying succeeded - postpone the update operations to NR_XXX_THPS until both scanning and copying succeeded - for non-SHMEM file, roll back filemap_nr_thps_inc if scan succeeded but copying failed Tested manually: 0. Enable khugepaged on system under test. Mount tmpfs at /mnt/ramdisk. 1. Start a two-thread application. Each thread allocates a chunk of non-huge memory buffer from /mnt/ramdisk. 2. Pick 4 random buffer address (2 in each thread) and inject uncorrectable memory errors at physical addresses. 3. Signal both threads to make their memory buffer collapsible, i.e. calling madvise(MADV_HUGEPAGE). 4. Wait and then check kernel log: khugepaged is able to recover from poisoned pages by skipping them. 5. Signal both threads to inspect their buffer contents and make sure no data corruption. Link: https://lkml.kernel.org/r/20230329151121.949896-4-jiaqiyan@google.comSigned-off-by:
Jiaqi Yan <jiaqiyan@google.com> Reviewed-by:
-
Jiaqi Yan authored
Similar to how copy_mc_user_highpage is implemented for copy_user_highpage on #MC supported architecture, introduce the #MC handled version of copy_highpage. This helper has immediate usage when khugepaged wants to copy file-backed memory pages and tolerate #MC. Link: https://lkml.kernel.org/r/20230329151121.949896-3-jiaqiyan@google.comSigned-off-by:
-
Jiaqi Yan authored
Problem ======= Memory DIMMs are subject to multi-bit flips, i.e. memory errors. As memory size and density increase, the chances of and number of memory errors increase. The increasing size and density of server RAM in the data center and cloud have shown increased uncorrectable memory errors. There are already mechanisms in the kernel to recover from uncorrectable memory errors. This series of patches provides the recovery mechanism for the particular kernel agent khugepaged when it collapses memory pages. Impact ====== The main reason we chose to make khugepaged collapsing tolerant of memory failures was its high possibility of accessing poisoned memory while performing functionally optional compaction actions. Standard applications typically don't have strict requirements on the size of its pages. So they are given 4K pages by the kernel. The kernel is able to improve application performance by either 1) giving applications 2M pages to begin with, or 2) collapsing 4K pages into 2M pages when possible. This collapsing operation is done by khugepaged, a kernel agent that is constantly scanning memory. When collapsing 4K pages into a 2M page, it must copy the data from the 4K pages into a physically contiguous 2M page. Therefore, as long as there exists one poisoned cache line in collapsible 4K pages, khugepaged will eventually access it. The current impact to users is a machine check exception triggered kernel panic. However, khugepaged’s compaction operations are not functionally required kernel actions. Therefore making khugepaged tolerant to poisoned memory will greatly improve user experience. This patch series is for cases where khugepaged is the first guy that detects the memory errors on the poisoned pages. IOW, the pages are not known to have memory errors when khugepaged collapsing gets to them. In our observation, this happens frequently when the huge page ratio of the system is relatively low, which is fairly common in virtual machines running on cloud. Solution ======== As stated before, it is less desirable to crash the system only because khugepaged accesses poisoned pages while it is collapsing 4K pages. The high level idea of this patch series is to skip the group of pages (usually 512 4K-size pages) once khugepaged finds one of them is poisoned, as these pages have become ineligible to be collapsed. We are also careful to unwind operations khuagepaged has performed before it detects memory failures. For example, before copying and collapsing a group of anonymous pages into a huge page, the source pages will be isolated and their page table is unlinked from their PMD. These operations need to be undone in order to ensure these pages are not changed/lost from the perspective of other threads (both user and kernel space). As for file backed memory pages, there already exists a rollback case. This patch just extends it so that khugepaged also correctly rolls back when it fails to copy poisoned 4K pages. This patch (of 3): Make __collapse_huge_page_copy return whether copying anonymous pages succeeded, and make collapse_huge_page handle the return status. Break existing PTE scan loop into two for-loops. The first loop copies source pages into target huge page, and can fail gracefully when running into memory errors in source pages. If copying all pages succeeds, the second loop releases and clears up these normal pages. Otherwise, the second loop rolls back the page table and page states by: - re-establishing the original PTEs-to-PMD connection. - releasing source pages back to their LRU list. Tested manually: 0. Enable khugepaged on system under test. 1. Start a two-thread application. Each thread allocates a chunk of non-huge anonymous memory buffer. 2. Pick 4 random buffer locations (2 in each thread) and inject uncorrectable memory errors at corresponding physical addresses. 3. Signal both threads to make their memory buffer collapsible, i.e. calling madvise(MADV_HUGEPAGE). 4. Wait and check kernel log: khugepaged is able to recover from poisoned pages and skips collapsing them. 5. Signal both threads to inspect their buffer contents and make sure no data corruption. Link: https://lkml.kernel.org/r/20230329151121.949896-1-jiaqiyan@google.com Link: https://lkml.kernel.org/r/20230329151121.949896-2-jiaqiyan@google.comSigned-off-by:
-
Yosry Ahmed authored
In some situations, we may end up calling memcg_rstat_updated() with a value of 0, which means the stat was not actually updated. An example is if we fail to reclaim any pages in shrink_folio_list(). Do not add the cgroup to the rstat updated tree in this case, to avoid unnecessarily flushing it. Link: https://lkml.kernel.org/r/20230330191801.1967435-9-yosryahmed@google.comSigned-off-by:
Yosry Ahmed <yosryahmed@google.com> Acked-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Koutný <mkoutny@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Vasily Averin <vasily.averin@linux.dev> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by:
-
Yosry Ahmed authored
Memory reclaim is a sleepable context. Flushing is an expensive operaiton that scales with the number of cpus and the number of cgroups in the system, so avoid doing it atomically unnecessarily. This can slow down reclaim code if flushing stats is taking too long, but there is already multiple cond_resched()'s in reclaim code. Link: https://lkml.kernel.org/r/20230330191801.1967435-8-yosryahmed@google.comSigned-off-by:
-
Yosry Ahmed authored
In workingset_refault(), we call mem_cgroup_flush_stats_atomic_ratelimited() to read accurate stats within an RCU read section and with sleeping disallowed. Move the call above the RCU read section to make it non-atomic. Flushing is an expensive operation that scales with the number of cpus and the number of cgroups in the system, so avoid doing it atomically where possible. Since workingset_refault() is the only caller of mem_cgroup_flush_stats_atomic_ratelimited(), just make it non-atomic, and rename it to mem_cgroup_flush_stats_ratelimited(). Link: https://lkml.kernel.org/r/20230330191801.1967435-7-yosryahmed@google.comSigned-off-by:
-
Yosry Ahmed authored
Currently, all contexts that flush memcg stats do so with sleeping not allowed. Some of these contexts are perfectly safe to sleep in, such as reading cgroup files from userspace or the background periodic flusher. Flushing is an expensive operation that scales with the number of cpus and the number of cgroups in the system, so avoid doing it atomically where possible. Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka sleepable), and provide a separate atomic version. The atomic version is used in reclaim, refault, writeback, and in mem_cgroup_usage(). All other code paths are left to use the non-atomic version. This includes callbacks for userspace reads and the periodic flusher. Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(), change it to mem_cgroup_flush_stats_atomic_ratelimited(). Reclaim and refault code paths are modified to do non-atomic flushing in separate later patches -- so it will eventually be changed back to mem_cgroup_flush_stats_ratelimited(). Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.comSigned-off-by:
-
Yosry Ahmed authored
As Johannes notes in [1], stats_flush_lock is currently used to: (a) Protect updated to stats_flush_threshold. (b) Protect updates to flush_next_time. (c) Serializes calls to cgroup_rstat_flush() based on those ratelimits. However: 1. stats_flush_threshold is already an atomic 2. flush_next_time is not atomic. The writer is locked, but the reader is lockless. If the reader races with a flush, you could see this: if (time_after(jiffies, flush_next_time)) spin_trylock() flush_next_time = now + delay flush() spin_unlock() spin_trylock() flush_next_time = now + delay flush() spin_unlock() which means we already can get flushes at a higher frequency than FLUSH_TIME during races. But it isn't really a problem. The reader could also see garbled partial updates if the compiler decides to split the write, so it needs at least READ_ONCE and WRITE_ONCE protection. 3. Serializing cgroup_rstat_flush() calls against the ratelimit factors is currently broken because of the race in 2. But the race is actually harmless, all we might get is the occasional earlier flush. If there is no delta, the flush won't do much. And if there is, the flush is justified. So the lock can be removed all together. However, the lock also served the purpose of preventing a thundering herd problem for concurrent flushers, see [2]. Use an atomic instead to serve the purpose of unifying concurrent flushers. [1]https://lore.kernel.org/lkml/20230323172732.GE739026@cmpxchg.org/ [2]https://lore.kernel.org/lkml/20210716212137.1391164-2-shakeelb@google.com/ Link: https://lkml.kernel.org/r/20230330191801.1967435-5-yosryahmed@google.comSigned-off-by: -
Yosry Ahmed authored
Currently, the only context in which we can invoke an rstat flush from irq context is through mem_cgroup_usage() on the root memcg when called from memcg_check_events(). An rstat flush is an expensive operation that should not be done in irq context, so do not flush stats and use the stale stats in this case. Arguably, usage threshold events are not reliable on the root memcg anyway since its usage is ill-defined. Link: https://lkml.kernel.org/r/20230330191801.1967435-4-yosryahmed@google.comSigned-off-by:
-
Yosry Ahmed authored
mem_cgroup_flush_stats_delayed() suggests his is using a delayed_work, but this is actually sometimes flushing directly from the callsite. What it's doing is ratelimited calls. A better name would be mem_cgroup_flush_stats_ratelimited(). Link: https://lkml.kernel.org/r/20230330191801.1967435-3-yosryahmed@google.comSigned-off-by:
-
Yosry Ahmed authored
Patch series "memcg: avoid flushing stats atomically where possible", v3. rstat flushing is an expensive operation that scales with the number of cpus and the number of cgroups in the system. The purpose of this series is to minimize the contexts where we flush stats atomically. Patches 1 and 2 are cleanups requested during reviews of prior versions of this series. Patch 3 makes sure we never try to flush from within an irq context. Patches 4 to 7 introduce separate variants of mem_cgroup_flush_stats() for atomic and non-atomic flushing, and make sure we only flush the stats atomically when necessary. Patch 8 is a slightly tangential optimization that limits the work done by rstat flushing in some scenarios. This patch (of 8): cgroup_rstat_flush_irqsafe() can be a confusing name. It may read as "irqs are disabled throughout", which is what the current implementation does (currently under discussion [1]), but is not the intention. The intention is that this function is safe to call from atomic contexts. Name it as such. Link: https://lkml.kernel.org/r/20230330191801.1967435-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20230330191801.1967435-2-yosryahmed@google.comSigned-off-by:
-
Peng Zhang authored
In __kfence_alloc() and __kfence_free(), we will set and check canary. Assuming that the size of the object is close to 0, nearly 4k memory accesses are required because setting and checking canary is executed byte by byte. canary is now defined like this: KFENCE_CANARY_PATTERN(addr) ((u8)0xaa ^ (u8)((unsigned long)(addr) & 0x7)) Observe that canary is only related to the lower three bits of the address, so every 8 bytes of canary are the same. We can access 8-byte canary each time instead of byte-by-byte, thereby optimizing nearly 4k memory accesses to 4k/8 times. Use the bcc tool funclatency to measure the latency of __kfence_alloc() and __kfence_free(), the numbers (deleted the distribution of latency) is posted below. Though different object sizes will have an impact on the measurement, we ignore it for now and assume the average object size is roughly equal. Before patching: __kfence_alloc: avg = 5055 nsecs, total: 5515252 nsecs, count: 1091 __kfence_free: avg = 5319 nsecs, total: 9735130 nsecs, count: 1830 After patching: __kfence_alloc: avg = 3597 nsecs, total: 6428491 nsecs, count: 1787 __kfence_free: avg = 3046 nsecs, total: 3415390 nsecs, count: 1121 The numbers indicate that there is ~30% - ~40% performance improvement. Link: https://lkml.kernel.org/r/20230403122738.6006-1-zhangpeng.00@bytedance.comSigned-off-by:
Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by:
Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Liu Shixin authored
Since some users may not use zswap, the zswap_pool is wasted. Save memory by delaying the initialization of zswap until enabled. [liushixin2@huawei.com: fix some pattern problem suggested by Christoph] Link: https://lkml.kernel.org/r/20230411093632.822290-4-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20230403121318.1876082-4-liushixin2@huawei.comSigned-off-by:
Liu Shixin <liushixin2@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by:
-
Liu Shixin authored
The zswap_init_started variable name has a bit confusing. Actually, there are three state: uninitialized, initial failed and initial succeed. Add a new variable zswap_init_state to replace zswap_init_{started/failed}. Link: https://lkml.kernel.org/r/20230403121318.1876082-3-liushixin2@huawei.comSigned-off-by: -
Liu Shixin authored
Patch series "Delay the initialization of zswap", v9. In the initialization of zswap, about 18MB memory will be allocated for zswap_pool. Since some users may not use zswap, the zswap_pool is wasted. Save memory by delaying the initialization of zswap until enabled. This patch (of 3): Remove zswap_entry_cache_create and zswap_entry_cache_destroy and use kmem_cache_* function directly. Link: https://lkml.kernel.org/r/20230411093632.822290-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20230403121318.1876082-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20230403121318.1876082-2-liushixin2@huawei.comSigned-off-by:
-
Uladzislau Rezki (Sony) authored
Short the name of the addr_to_vb_xarray() function to the addr_to_vb_xa(). This aligns with other internal function abbreviations. Link: https://lkml.kernel.org/r/20230331073727.6968-1-urezki@gmail.comSigned-off-by:
Uladzislau Rezki (Sony) <urezki@gmail.com> Suggested-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com> Signed-off-by:
-
Hao Ge authored
kmemleak-test.c was moved to the samples directory in 1abbef4f ("mm,kmemleak-test.c: move kmemleak-test.c to samples dir"). If CONFIG_DEBUG_KMEMLEAK_TEST=m and CONFIG_SAMPLES is unset, kmemleak-test.c will be unnecessarily compiled. So move the entry for CONFIG_DEBUG_KMEMLEAK_TEST from mm/Kconfig and add a new CONFIG_SAMPLE_KMEMLEAK in samples/ to control whether kmemleak-test.c is built or not. Link: https://lkml.kernel.org/r/20230330060904.292975-1-gehao@kylinos.cn Fixes: 1abbef4f ("mm,kmemleak-test.c: move kmemleak-test.c to samples dir") Signed-off-by:
Hao Ge <gehao@kylinos.cn> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Finn Behrens <me@kloenk.dev> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Tony Krowiak <akrowiak@linux.ibm.com> Cc: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Uladzislau Rezki (Sony) authored
Add vm_map_ram()/vm_unmap_ram() test case to our stress test-suite. [akpm@linux-foundation.org: fix whitespace, per Lorenzo] Link: https://lkml.kernel.org/r/20230330190639.431589-2-urezki@gmail.comSigned-off-by:
-
Uladzislau Rezki (Sony) authored
A global vmap_blocks-xarray array can be contented under heavy usage of the vm_map_ram()/vm_unmap_ram() APIs. The lock_stat shows that a "vmap_blocks.xa_lock" lock is a second in a top-list when it comes to contentions: <snip> ---------------------------------------- class name con-bounces contentions ... ---------------------------------------- vmap_area_lock: 2554079 2554276 ... -------------- vmap_area_lock 1297948 [<00000000dd41cbaa>] alloc_vmap_area+0x1c7/0x910 vmap_area_lock 1256330 [<000000009d927bf3>] free_vmap_block+0x4a/0xe0 vmap_area_lock 1 [<00000000c95c05a7>] find_vm_area+0x16/0x70 -------------- vmap_area_lock 1738590 [<00000000dd41cbaa>] alloc_vmap_area+0x1c7/0x910 vmap_area_lock 815688 [<000000009d927bf3>] free_vmap_block+0x4a/0xe0 vmap_area_lock 1 [<00000000c1d619d7>] __get_vm_area_node+0xd2/0x170 vmap_blocks.xa_lock: 862689 862698 ... ------------------- vmap_blocks.xa_lock 378418 [<00000000625a5626>] vm_map_ram+0x359/0x4a0 vmap_blocks.xa_lock 484280 [<00000000caa2ef03>] xa_erase+0xe/0x30 ------------------- vmap_blocks.xa_lock 576226 [<00000000caa2ef03>] xa_erase+0xe/0x30 vmap_blocks.xa_lock 286472 [<00000000625a5626>] vm_map_ram+0x359/0x4a0 ... <snip> that is a result of running vm_map_ram()/vm_unmap_ram() in a loop. The test creates 64(on 64 CPUs system) threads and each one maps/unmaps 1 page. After this change the "xa_lock" can be considered as a noise in the same test condition: <snip> ... &xa->xa_lock#1: 10333 10394 ... -------------- &xa->xa_lock#1 5349 [<00000000bbbc9751>] xa_erase+0xe/0x30 &xa->xa_lock#1 5045 [<0000000018def45d>] vm_map_ram+0x3a4/0x4f0 -------------- &xa->xa_lock#1 7326 [<0000000018def45d>] vm_map_ram+0x3a4/0x4f0 &xa->xa_lock#1 3068 [<00000000bbbc9751>] xa_erase+0xe/0x30 ... <snip> Running the test_vmalloc.sh run_test_mask=1024 nr_threads=64 nr_pages=5 shows around ~8 percent of throughput improvement of vm_map_ram() and vm_unmap_ram() APIs. This patch does not fix vmap_area_lock/free_vmap_area_lock and purge_vmap_area_lock bottle-necks, it is rather a separate rework. Link: https://lkml.kernel.org/r/20230330190639.431589-1-urezki@gmail.comSigned-off-by:
-
Mike Rapoport (IBM) authored
The free_area_empty() helper is only used inside mm/ so move it there to reduce noise in include/linux/mmzone.h Link: https://lkml.kernel.org/r/20230326160215.2674531-1-rppt@kernel.orgSigned-off-by:
Mike Rapoport (IBM) <rppt@kernel.org> Suggested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Zhen Lei authored
After commit 446ec838 ("mm/page_alloc: use might_alloc()") and commit 84172f4b ("mm/page_alloc: combine __alloc_pages and __alloc_pages_nodemask"), the comment is no longer accurate. Flag '__GFP_DIRECT_RECLAIM' is clear enough on its own, so remove the comment rather than update it. Link: https://lkml.kernel.org/r/20230327034149.942-1-thunder.leizhen@huawei.comSigned-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Sidhartha Kumar removed the last caller of PageHeadHuge(), so we can now remove it and make folio_test_hugetlb() the real implementation. Add kernel-doc for folio_test_hugetlb(). Link: https://lkml.kernel.org/r/20230327151050.1787744-1-willy@infradead.orgSigned-off-by:
Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
-
Mike Rapoport (IBM) authored
The prompt and help text of ARCH_FORCE_MAX_ORDER are not even close to describe this configuration option. Update both to actually describe what this option does. Link: https://lkml.kernel.org/r/20230324052233.2654090-15-rppt@kernel.orgSigned-off-by:
Max Filippov <jcmvbkbc@gmail.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
Zi Yan <ziy@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rich Felker <dalias@libc.org> Cc: "Russell King (Oracle)" <linux@armlinux.org.uk> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Mike Rapoport (IBM) authored
The prompt and help text of ARCH_FORCE_MAX_ORDER are not even close to describe this configuration option. Update both to actually describe what this option does. Link: https://lkml.kernel.org/r/20230324052233.2654090-14-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
sh defines insane ranges for ARCH_FORCE_MAX_ORDER allowing MAX_ORDER up to 63, which implies maximal contiguous allocation size of 2^63 pages. Drop bogus definitions of ranges for ARCH_FORCE_MAX_ORDER and leave it a simple integer with sensible defaults. Users that *really* need to change the value of ARCH_FORCE_MAX_ORDER will be able to do so but they won't be mislead by the bogus ranges. [rppt@kernel.org: untweak ARCH_FORCE_MAX_ORDER's `range'] Link: https://lkml.kernel.org/r/20230325060828.2662773-13-rppt@kernel.org Link: https://lkml.kernel.org/r/20230324052233.2654090-13-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
The prompt and help text of ARCH_FORCE_MAX_ORDER are not even close to describe this configuration option. Update both to actually describe what this option does. [rppt@kernel.org: tweak ARCH_FORCE_MAX_ORDER's `range'] Link: https://lkml.kernel.org/r/20230325060828.2662773-12-rppt@kernel.org Link: https://lkml.kernel.org/r/20230324052233.2654090-12-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
PowerPC defines ranges for ARCH_FORCE_MAX_ORDER some of which are insanely allowing MAX_ORDER up to 63, which implies maximal contiguous allocation size of 2^63 pages. Drop bogus definitions of ranges for ARCH_FORCE_MAX_ORDER and leave it a simple integer with sensible defaults. Users that *really* need to change the value of ARCH_FORCE_MAX_ORDER will be able to do so but they won't be mislead by the bogus ranges. Link: https://lkml.kernel.org/r/20230324052233.2654090-11-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
The prompt and help text of ARCH_FORCE_MAX_ORDER are not even close to describe this configuration option. Update both to actually describe what this option does. Link: https://lkml.kernel.org/r/20230324052233.2654090-10-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
nios2 defines range for ARCH_FORCE_MAX_ORDER allowing MAX_ORDER up to 19, which implies maximal contiguous allocation size of 2^19 pages or 2GiB. Drop bogus definition of ranges for ARCH_FORCE_MAX_ORDER and leave it a simple integer with sensible default. Users that *really* need to change the value of ARCH_FORCE_MAX_ORDER will be able to do so but they won't be mislead by the bogus ranges. Link: https://lkml.kernel.org/r/20230324052233.2654090-9-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
The prompt and help text of ARCH_FORCE_MAX_ORDER are not even close to describe this configuration option. Update both to actually describe what this option does. Link: https://lkml.kernel.org/r/20230324052233.2654090-8-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
The prompt and help text of ARCH_FORCE_MAX_ORDER are not even close to describe this configuration option. Update both to actually describe what this option does. Link: https://lkml.kernel.org/r/20230324052233.2654090-7-rppt@kernel.orgSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Mike Rapoport (IBM) authored
It is enough to keep default values for base and huge pages without letting users to override ARCH_FORCE_MAX_ORDER. Drop the prompt to make the option unvisible in *config. Link: https://lkml.kernel.org/r/20230324052233.2654090-6-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
The default value of ARCH_FORCE_MAX_ORDER matches the generic default defined in the MM code, the architecture does not support huge pages, so there is no need to keep ARCH_FORCE_MAX_ORDER option available. Drop it. Link: https://lkml.kernel.org/r/20230324052233.2654090-5-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport (IBM) authored
The prompt and help text of ARCH_FORCE_MAX_ORDER are not even close to describe this configuration option. Update both to actually describe what this option does. [rppt@kernel.org: change ARCH_FORCE_MAX_ORDER dependencies] Link: https://lkml.kernel.org/r/20230325060828.2662773-4-rppt@kernel.org Link: https://lkml.kernel.org/r/20230324052233.2654090-4-rppt@kernel.orgSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rich Felker <dalias@libc.org> Cc: "Russell King (Oracle)" <linux@armlinux.org.uk> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
