Use the network_device_stats field in network_device.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Last_rx is now done if needed inside bonding.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to net_device_ops.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert this driver to use net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When changing the link between 100Mbps and 1Gbps in SGMII mode it was
found out that the link would stop working.  The issue is that ECNTRL[R100]
needs to be cleared when in 1Gbps mode.  Older reference manuals didn't
require the explicitly clearing but has since been found it that it is
needed.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The AF_CAN core delivered always cloned sk_buffs to the AF_CAN
protocols, although this was _only_ needed by the can-raw protocol.
With this (additionally documented) change, the AF_CAN core calls the
callback functions of the registered AF_CAN protocols with the original
(uncloned) sk_buff pointer and let's the can-raw protocol do the
skb_clone() itself which omits all unneeded skb_clone() calls for other
AF_CAN protocols.
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some cheap devices ship with dangling EEPROM pins!
They always return invalid address ff:ff:ff:ff:ff:ff.

Inherit the auto-generated address in this case,
so that these products can work with zero configuration.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds GRO interfaces for hardware-assisted VLAN reception.
With this in place we're now at parity with LRO as far as the
interface is concerned.  That is, you can now take any LRO driver
and convert it over to GRO.

As the CB memory clashes with GRO's use of CB, I've removed it
entirely by storing dev in skb->dev.  This is OK because VLAN
gets called first thing in netif_receive_skb and skb->dev is
not used in between us calling netif_rx and netif_receive_skb
getting called.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously GRO's only entry point from the outside is through
napi_gro_receive and napi_gro_frags.  These interfaces are for
device drivers.

This patch rearranges things to provide a new set of interfaces
for VLANs.  These interfaces are for internal use only.  The
VLAN code itself can then provide a set of entry points for
device drivers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

These variables are only used with an interface that just dumps their
values into registers to be passed to the hypervisor. The arguments
to that interface are declared to be "unsigned long", so make these
variables match.  The macros are only used with these variables, so make
them match as well.

This code is currently only built for 64bit powerpc, so the transformation
is really a noop.  If the interface was ever ported to 32 bit, it would
almost certainly still use registers to pass the parameters and so
"unsigned long" would still be appropriate.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

ehea_plpar_hcall9() takes an "unsigned long" array to return its results,
so change the arrays we pass to it to match.  This is currently only
64 bit code, so the transformation is actually a noop, but because
ehea_plpar_hcall9() copies the values of registers into the array,
if this was ported to a 32 bit hypervisor interface "unsigned long"
would probably still be the correct type.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert this driver to net_device_ops.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert Xen device to new API.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the correct pointer in debug message.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert IRDA drivers to use already existing net_device_stats structure
in network device. This is a pre-cursor to conversion to net_device
ops. Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When I applied the firmware conversion I made a mistake
which caused the acenic_firmware.h deletion to not happen.

Fix that up.

Noticed by Linus.
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm snapshot: extend exception store functions
  dm snapshot: split out exception store implementations
  dm snapshot: rename struct exception_store
  dm snapshot: separate out exception store interface
  dm mpath: move trigger_event to system workqueue
  dm: add name and uuid to sysfs
  dm table: rework reference counting
  dm: support barriers on simple devices
  dm request: extend target interface
  dm request: add caches
  dm ioctl: allow dm_copy_name_and_uuid to return only one field
  dm log: ensure log bitmap fits on log device
  dm log: move region_size validation
  dm log: avoid reinitialising io_req on every operation
  dm: consolidate target deregistration error handling
  dm raid1: fix error count
  dm log: fix dm_io_client leak on error paths
  dm snapshot: change yield to msleep
  dm table: drop reference at unbind

Supply dm_add_exception as a callback to the read_metadata function.
Add a status function ready for a later patch and name the functions
consistently.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move the existing snapshot exception store implementations out into
separate files.  Later patches will place these behind a new
interface in preparation for alternative implementations.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Rename struct exception_store to dm_exception_store.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Pull structures that bridge the gap between snapshot and
exception store out of dm-snap.h and put them in a new
.h file - dm-exception-store.h.  This file will define the
API for new exception stores.

Ultimately, dm-snap.h is unnecessary, since only dm-snap.c
should be using it.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

The same workqueue is used both for sending uevents and processing queued I/O.
Deadlock has been reported in RHEL5 when sending a uevent was blocked waiting
for the queued I/O to be processed.  Use scheduled_work() for the asynchronous
uevents instead.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Implement simple read-only sysfs entry for device-mapper block device.

This patch adds a simple sysfs directory named "dm" under block device
properties and implements
	- name attribute (string containing mapped device name)
	- uuid attribute (string containing UUID, or empty string if not set)

The kobject is embedded in mapped_device struct, so no additional
memory allocation is needed for initializing sysfs entry.

During the processing of sysfs attribute we need to lock mapped device
which is done by a new function dm_get_from_kobj, which returns the md
associated with kobject and increases the usage count.

Each 'show attribute' function is responsible for its own locking.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Rework table reference counting.

The existing code uses a reference counter. When the last reference is
dropped and the counter reaches zero, the table destructor is called.
Table reference counters are acquired/released from upcalls from other
kernel code (dm_any_congested, dm_merge_bvec, dm_unplug_all).
If the reference counter reaches zero in one of the upcalls, the table
destructor is called from almost random kernel code.

This leads to various problems:
* dm_any_congested being called under a spinlock, which calls the
  destructor, which calls some sleeping function.
* the destructor attempting to take a lock that is already taken by the
  same process.
* stale reference from some other kernel code keeps the table
  constructed, which keeps some devices open, even after successful
  return from "dmsetup remove". This can confuse lvm and prevent closing
  of underlying devices or reusing device minor numbers.

The patch changes reference counting so that the table destructor can be
called only at predetermined places.

The table has always exactly one reference from either mapped_device->map
or hash_cell->new_map. After this patch, this reference is not counted
in table->holders.  A pair of dm_create_table/dm_destroy_table functions
is used for table creation/destruction.

Temporary references from the other code increase table->holders. A pair
of dm_table_get/dm_table_put functions is used to manipulate it.

When the table is about to be destroyed, we wait for table->holders to
reach 0. Then, we call the table destructor.  We use active waiting with
msleep(1), because the situation happens rarely (to one user in 5 years)
and removing the device isn't performance-critical task: the user doesn't
care if it takes one tick more or not.

This way, the destructor is called only at specific points
(dm_table_destroy function) and the above problems associated with lazy
destruction can't happen.

Finally remove the temporary protection added to dm_any_congested().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Implement barrier support for single device DM devices

This patch implements barrier support in DM for the common case of dm linear
just remapping a single underlying device. In this case we can safely
pass the barrier through because there can be no reordering between
devices.

 NB. Any DM device might cease to support barriers if it gets
     reconfigured so code must continue to allow for a possible
     -EOPNOTSUPP on every barrier bio submitted.  - agk
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch adds the following target interfaces for request-based dm.

  map_rq    : for mapping a request

  rq_end_io : for finishing a request

  busy      : for avoiding performance regression from bio-based dm.
              Target can tell dm core not to map requests now, and
              that may help requests in the block layer queue to be
              bigger by I/O merging.
              In bio-based dm, this behavior is done by device
              drivers managing the block layer queue.
              But in request-based dm, dm core has to do that
              since dm core manages the block layer queue.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch prepares some kmem_caches for request-based dm.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Allow NULL buffer in dm_copy_name_and_uuid if you only want to return one of
the fields.

(Required by a following patch that adds these fields to sysfs.)
Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Check that the log bitmap will fit within the log device.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move log size validation from mirror target to log constructor.

Removed PAGE_SIZE restriction we no longer think necessary.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

rw_header function updates three members of io_req data every time
when I/O is processed. bi_rw and notify.fn are never modified once
they get initialized, and so they can be set in advance.

header_to_disk() can also be pulled out of write_header() since only one
caller needs it and write_header() can be replaced by rw_header()
directly.
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Change dm_unregister_target to return void and use BUG() for error
reporting.

dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.

This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.

This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Always increase the error count when I/O on a leg of a mirror fails.

The error count is used to decide whether to select an alternative
mirror leg.  If the target doesn't use the "handle_errors" feature, the
error count is not updated and the bio can get requeued forever by the
read callback.

Fix it by increasing error_count before the handle_errors feature
checking.

Cc: stable@kernel.org
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

In create_log_context function, dm_io_client_destroy function needs
to be called, when memory allocation of disk_header, sync_bits and
recovering_bits failed, but dm_io_client_destroy is not called.

Cc: stable@kernel.org
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Acked-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Change yield() to msleep(1). If the thread had realtime priority,
yield() doesn't really yield, so the yielding process would loop
indefinitely and cause machine lockup.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move one dm_table_put() so that the last reference in the thread
gets dropped in __unbind().

This is required for a following patch,
dm-table-rework-reference-counting.patch, which will change the logic in
such a way that table destructor is called only at specific points in
the code.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

* 'for-next' of git://git.o-hand.com/linux-mfd: (30 commits)
  mfd: Fix section mismatch in da903x
  mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd
  mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
  mfd: dm355evm msp430 driver
  mfd: Add missing break from wm3850-core
  mfd: Add WM8351 support
  mfd: Support configurable numbers of DCDCs and ISINKs on WM8350
  mfd: Handle missing WM8350 platform data
  mfd: Add WM8352 support
  mfd: Use irq_to_desc in twl4030 code
  power_supply: Add Dialog DA9030 battery charger driver
  mfd: Dialog DA9030 battery charger MFD driver
  mfd: Register WM8400 codec device
  mfd: Pass driver_data onto child devices
  mfd: Fix twl4030-core.c build error
  mfd: twl4030 regulator bug fixes
  mfd: twl4030: create some regulator devices
  mfd: twl4030: cleanup symbols and OMAP dependency
  mfd: twl4030: simplified child creation code
  power_supply: Add battery health reporting for WM8350
  ...