This was causing a "sleeping function called from invalid context"
warning.

I don't think we need the set_and_test_bit() here; clients move from
unconfirmed to confirmed only once, under the client_lock.

The (conf == unconf) is a way to check whether we're in that confirming
case, hopefully that's not too obscure.

Fixes: 472d155a "nfsd: report client confirmation status in "info" file"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Currently the source's export is mounted and unmounted on every
inter-server copy operation. This patch is an enhancement to delay
the unmount of the source export for a certain period of time to
eliminate the mount and unmount overhead on subsequent copy operations.

After a copy operation completes, a work entry is added to the
delayed unmount list with an expiration time. This list is serviced
by the laundromat thread to unmount the export of the expired entries.
Each time the export is being used again, its expiration time is
extended and the entry is re-inserted to the tail of the list.

The unmount task and the mount operation of the copy request are
synced to make sure the export is not unmounted while it's being
used.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Currently, the server does all copies as NFS_UNSTABLE. For synchronous
copies linux client will append a COMMIT to the COPY compound but for
async copies it does not (because COMMIT needs to be done after all
bytes are copied and not as a reply to the COPY operation).

However, in order to save the client doing a COMMIT as a separate
rpc, the server can reply back with NFS_FILE_SYNC copy. This patch
proposed to add vfs_fsync() call at the end of the async copy.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The commit may be time-consuming and there's no need to hold the lock
for it.

More of these are possible, these were just some easy ones.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Truncation of an unlinked inode may take a long time for I/O waiting, and
it doesn't have to prevent access to the directory. Thus, let truncation
occur outside the directory's mutex, just like do_unlinkat() does.
Signed-off-by: Yu Hsiang Huang <nickhuang@synology.com>
Signed-off-by: Bing Jing Chang <bingjingc@synology.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Clean-up: Re-order the display of IP address and client ID to be
consistent with other _cb_ tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Clean up: These are noise in properly working systems. If you really
need to observe the operation of the callback mechanism, use the
sunrpc:rpc\* tracepoints along with the workqueue tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Record a tracepoint event when the server performs a callback
probe. This event can be enabled as a group with other nfsd_cb
tracepoints.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Renamed so it can be enabled as a set with the other nfsd_cb_
tracepoints. And, consistent with those tracepoints, report the
address of the client, the client ID the server has given it, and
the state ID being recalled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Record the arguments of CB_OFFLOAD callbacks so we can better
observe asynchronous copy-offload behavior. For example:

nfsd-995   [008]  7721.934222: nfsd_cb_offload:
        addr=192.168.2.51:0 client 6092a47c:35a43fc1 fh_hash=0x8739113a
        count=116528 status=0
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

When the server kicks off a CB_LM_NOTIFY callback, record its
arguments so we can better observe asynchronous locking behavior.
For example:

            nfsd-998   [002]  1471.705873: nfsd_cb_notify_lock:  addr=192.168.2.51:0 client 6092a47c:35a43fc1 fh_hash=0x8950b23a
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Display the transport protocol and authentication flavor so admins
can see what they might be getting wrong.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

This path is not really an error path, so the tracepoint I added
there is just noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Show when the upper layer requested a shutdown. RPC tracepoints can
already show when rpc_shutdown_client() is called.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Provide more clarity about when the callback channel is in trouble.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

TRACE_DEFINE_ENUM() is necessary for enum {} but not for C macros.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We were missing one.

As a clean-up, add a helper that sets the new CB state and fires
a tracepoint. The tracepoint fires only when the state changes, to
help reduce trace log noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Enable knfsd_fh_hash() to be invoked in functions where the
filehandle pointer is a const.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Some of the most common cases are traced. Enough infrastructure is
now in place that more can be added later, as needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Improve observation of NFSv4 lease expiry.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Record client-requested termination of client IDs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

This replaces a dprintk call site in order to get greater visibility
on when client IDs are confirmed or re-used. Simple example:

            nfsd-995   [000]   126.622975: nfsd_compound:        xid=0x3a34e2b1 opcnt=1
            nfsd-995   [000]   126.623005: nfsd_cb_args:         addr=192.168.2.51:45901 client 60958e3b:9213ef0e prog=1073741824 ident=1
            nfsd-995   [000]   126.623007: nfsd_compound_status: op=1/1 OP_SETCLIENTID status=0
            nfsd-996   [001]   126.623142: nfsd_compound:        xid=0x3b34e2b1 opcnt=1
  >>>>      nfsd-996   [001]   126.623146: nfsd_clid_confirmed:  client 60958e3b:9213ef0e
            nfsd-996   [001]   126.623148: nfsd_cb_probe:        addr=192.168.2.51:45901 client 60958e3b:9213ef0e state=UNKNOWN
            nfsd-996   [001]   126.623154: nfsd_compound_status: op=1/1 OP_SETCLIENTID_CONFIRM status=0
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

This tracepoint has been replaced by nfsd_clid_cred_mismatch and
nfsd_clid_verf_mismatch, and can simply be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Record when a client presents a different boot verifier than the
one we know about. Typically this is a sign the client has
rebooted, but sometimes it signals a conflicting client ID, which
the client's administrator will need to address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Record when a client tries to establish a lease record but uses an
unexpected credential. This is often a sign of a configuration
problem.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

To be used in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Since commit 9a6944fe ("tracing: Add a verifier to check string
pointers for trace events"), which was merged in v5.13-rc1,
TP_printk() no longer tacitly supports the "%.*s" format specifier.

These are low value tracepoints, so just remove them.
Reported-by: David Wysochanski <dwysocha@redhat.com>
Fixes: dd5e3fbc ("NFSD: Add tracepoints to the NFSD state management code")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Merge tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are two driver fixes for driver core changes that happened in
  5.13-rc1.

  The clk driver fix resolves a many-reported issue with booting some
  devices, and the USB typec fix resolves the reported problem of USB
  systems on some embedded boards.

  Both of these have been in linux-next this week with no reported
  issues"

* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  clk: Skip clk provider registration when np is NULL
  usb: typec: tcpm: Don't block probing of consumers of "connector" nodes

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes and one Staging driver fix for
  5.13-rc2.

  Nothing major, just some resolutions for reported problems:

   - gcc-11 bogus warning fix for rtl8723bs

   - iio driver tiny fixes

  All of these have been in linux-next for many days with no reported
  issues"

* tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: tsl2583: Fix division by a zero lux_val
  iio: core: return ENODEV if ioctl is unknown
  iio: core: fix ioctl handlers removal
  iio: gyro: mpu3050: Fix reported temperature value
  iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
  iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
  iio: light: gp2ap002: Fix rumtime PM imbalance on error
  staging: rtl8723bs: avoid bogus gcc warning

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.13-rc2. They consist of a number
  of resolutions for reported issues:

   - typec fixes for found problems

   - xhci fixes and quirk additions

   - dwc3 driver fixes

   - minor fixes found by Coverity

   - cdc-wdm fixes for reported problems

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  usb: core: hub: fix race condition about TRSMRCY of resume
  usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
  xhci: Add reset resume quirk for AMD xhci controller.
  usb: xhci: Increase timeout for HC halt
  xhci: Do not use GFP_KERNEL in (potentially) atomic context
  xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
  xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
  usb: musb: Fix an error message
  usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
  usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
  usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
  usb: fotg210-hcd: Fix an error message
  docs: usb: function: Modify path name
  usb: dwc3: omap: improve extcon initialization
  usb: typec: ucsi: Put fwnode in any case during ->probe()
  usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
  usb: dwc2: Remove obsolete MODULE_ constants from platform.c
  usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
  usb: dwc3: imx8mp: detect dwc3 core node via compatible string
  usb: dwc3: gadget: Return success always for kick transfer in ep queue
  ...

Pull timer fixes from Thomas Gleixner:
 "Two fixes for timers:

   - Use the ALARM feature check in the alarmtimer core code insted of
     the old method of checking for the set_alarm() callback.

     Drivers can have that callback set but the feature bit cleared. If
     such a RTC device is selected then alarms wont work.

   - Use a proper define to let the preprocessor check whether Hyper-V
     VDSO clocksource should be active.

     The code used a constant in an enum with #ifdef, which evaluates to
     always false and disabled the clocksource for VDSO"

* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
  alarmtimer: Check RTC features instead of ops

Pull xen fixes from Juergen Gross:

 - two patches for error path fixes

 - a small series for fixing a regression with swiotlb with Xen on Arm

* tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/swiotlb: check if the swiotlb has already been initialized
  arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
  xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
  xen/unpopulated-alloc: fix error return code in fill_list()
  xen/gntdev: fix gntdev_mmap() error exit path

Pull x86 fixes from Borislav Petkov:
 "The three SEV commits are not really urgent material. But we figured
  since getting them in now will avoid a huge amount of conflicts
  between future SEV changes touching tip, the kvm and probably other
  trees, sending them to you now would be best.

  The idea is that the tip, kvm etc branches for 5.14 will all base
  ontop of -rc2 and thus everything will be peachy. What is more, those
  changes are purely mechanical and defines movement so they should be
  fine to go now (famous last words).

  Summary:

   - Enable -Wundef for the compressed kernel build stage

   - Reorganize SEV code to streamline and simplify future development"

* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/compressed: Enable -Wundef
  x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
  x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
  x86/sev-es: Rename sev-es.{ch} to sev.{ch}

Pull powerpc fixes from Michael Ellerman:

 - Fix a regression in the conversion of the 64-bit BookE interrupt
   entry to C.

 - Fix KVM hosts running with the hash MMU since the recent KVM gfn
   changes.

 - Fix a deadlock in our paravirt spinlocks when hcall tracing is
   enabled.

 - Several fixes for oopses in our runtime code patching for security
   mitigations.

 - A couple of minor fixes for the recent conversion of 32-bit interrupt
   entry/exit to C.

 - Fix __get_user() causing spurious crashes in sigreturn due to a bad
   inline asm constraint, spotted with GCC 11.

 - A fix for the way we track IRQ masking state vs NMI interrupts when
   using the new scv system call entry path.

 - A couple more minor fixes.

Thanks to Cédric Le Goater, Christian Zigotzky, Christophe Leroy,
Naveen N. Rao, Nicholas Piggin Paul Menzel, and Sean Christopherson.

* tag 'powerpc-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64e/interrupt: Fix nvgprs being clobbered
  powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
  powerpc/64s: Fix stf mitigation patching w/strict RWX & hash
  powerpc/64s: Fix entry flush patching w/strict RWX & hash
  powerpc/64s: Fix crashes when toggling entry flush barrier
  powerpc/64s: Fix crashes when toggling stf barrier
  KVM: PPC: Book3S HV: Fix kvm_unmap_gfn_range_hv() for Hash MMU
  powerpc/legacy_serial: Fix UBSAN: array-index-out-of-bounds
  powerpc/signal: Fix possible build failure with unsafe_copy_fpr_{to/from}_user
  powerpc/uaccess: Fix __get_user() with CONFIG_CC_HAS_ASM_GOTO_OUTPUT
  powerpc/pseries: warn if recursing into the hcall tracing code
  powerpc/pseries: use notrace hcall variant for H_CEDE idle
  powerpc/pseries: Don't trace hcall tracing wrapper
  powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks
  powerpc/syscall: Calling kuap_save_and_lock() is wrong
  powerpc/interrupts: Fix kuep_unlock() call

Pull scheduler fixes from Ingo Molnar:
 "Fix an idle CPU selection bug, and an AMD Ryzen maximum frequency
  enumeration bug"

* tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations
  sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()

Pull objtool fixes from Ingo Molnar:
 "Fix a couple of endianness bugs that crept in"

* tag 'objtool-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool/x86: Fix elf_add_alternative() endianness
  objtool: Fix elf_create_undef_symbol() endianness

Pull irq fix from Ingo Molnar:
 "Fix build warning on SH"

* tag 'irq-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sh: Remove unused variable