- 04 Aug, 2010 5 commits
-
-
Felix Fietkau authored
The periodic noise floor calibration is broken on this chip family, because it keeps triggering a software-filtered noise floor calibration, but never reads the result before uploading the history buffer value to the hardware. Fix this with a call to ath9k_hw_getnf(), just like on AR9002. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Acked-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
On AR9003 the initial noise floor calibration is currently triggered at the end of the reset without allowing the hardware to update the baseband settings. This could potentially make scans in noisy environments a bit more unreliable, so use the same calibration sequence that is used on AR9002. Signed-off-by:
-
Johannes Berg authored
Releasing the scan mutex while starting scans can lead to unexpected things happening, so we shouldn't do that. Fix that and hold the mutex across the scan triggering. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit f84b29ec Author: Johannes Berg <johannes.berg@intel.com> Date: Tue May 18 02:29:13 2010 -0700 iwlwifi: queue user-initiated scan when doing internal scan introduced a potential deadlock because it calls ieee80211_scan_completed() with the priv->mutex held, but mac80211 may call back into iwlwifi which would lead to recursive locking. Move this out from under the mutex. Cc: stable@kernel.org Signed-off-by:
-
Cyril Chemparathy authored
Marvell 88ec048 is a derivative of its 88e1121r device. From the programmer's perspective, the one major difference is the addition of an additional control bit in Page 2 Register 16 - used to control the padding of odd nibble preambles. This patch adds support for this new device, while inheriting as much code as possible from the existing 88e1121r implementation. Signed-off-by:
Cyril Chemparathy <cyril@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 03 Aug, 2010 18 commits
-
-
Alexander Duyck authored
This patch addresses an issue seen on 82580 in which the MDICNFG register will be reset during a single function reset and as a result we will be unable to communicate with the PHY. To correct the issue, added a call to reset_mdicnfg just prior to the first access of the MDICNFG register in sgnii_uses_mdio. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Bruce Allan authored
The MAC-PHY interconnect register set on ICH/PCH parts is accessed through a peephole mechanism by writing an offset to a CSR register. The offset for the interconnect's half-duplex control register (which is used in a jumbo frame workaround for 82579) is incorrect. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Filip Aben authored
This patch adds a new product ID to the hso driver. Signed-off-by:
Filip Aben <f.aben@option.com> Signed-off-by:
-
Matthias Fuchs authored
This patch adds a driver for esd's USB high speed CAN interface. The driver supports devices with multiple CAN interfaces. Signed-off-by:
Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
James Chapman authored
The header file l2tp.h should be exported to the installed include/linux/ tree for userspace programs. This patch fixes compilation errors in L2TP userspace apps which want to use the new L2TP support introduced in 2.6.35. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Oliver Hartkopp authored
Commit fc6055a5 (net: Introduce skb_orphan_try()) allows an early orphan of the skb and takes care on tx timestamping, which needs the sk-reference in the skb on driver level. So does the can-raw socket, which has not been taken into account here. The patch below adds a 'prevent_sk_orphan' bit in the skb tx shared info, which fixes the problem discovered by Matthias Fuchs here: http://marc.info/?t=128030411900003&r=1&w=2 Even if it's not a primary tx timestamp topic it fits well into some skb shared tx context. Or should be find a different place for the information to protect the sk reference until it reaches the driver level? Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
David S. Miller authored
This reverts commit 15e83ed7. As explained by Johannes Berg, the optimization made here is invalid. Or, at best, incomplete. Not only destructor invocation, but conntract entry releasing must be executed outside of hw IRQ context. So just checking "skb->destructor" is insufficient. Signed-off-by:
-
Changli Gao authored
Commit ab95bfe0 replaces bridge and macvlan hooks in __netif_receive_skb(), so dev.c doesn't need to include their headers. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/e1000e/hw.h net/bridge/br_device.c net/bridge/br_input.c
-
Cyril Chemparathy authored
This patch adds support for RGMII RX/TX delay configuration on marvell 88e1121 and derivatives. With this patch, PHY_INTERFACE_MODE_RGMII_*ID modes are now supported on these devices. Signed-off-by:
-
stephen hemminger authored
It was possible to use a negative offset in a u32 match to reference the ethernet header or other parts of the link layer header. This fixes the regression caused by: commit fbc2e7d9 Author: Changli Gao <xiaosuo@gmail.com> Date: Wed Jun 2 07:32:42 2010 -0700 cls_u32: use skb_header_pointer() to dereference data safely Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Henrique Camargo authored
The typo was causing compilation errors since "dev" was not defined. Signed-off-by:
Henrique Camargo <henrique.camargo@ensitec.com.br> Signed-off-by:
-
Emil Tantilov authored
Synchronize all IRQs when using MSI-X. Similar to ixgbe. Issue was reported on e1000e, but the patch is also valid for igb. CC: Jean Delvare <jdelvare@suse.de> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
-
Alexander Duyck authored
This change corrects an issue that resulted in a null pointer dereference for the addition of VLAN 0 without any VLANs being registered. Also this code removes some unnecessary checks for defines and the unnecessary setting of VLAN flags since that is now handled within the kernel via the vlan_features. Signed-off-by:
-
Jeff Kirsher authored
Based on original patch/work from Jean Delvare <jdelvare@suse.de> Synchronize all IRQs when in MSI-X IRQ mode. Jean's original patch hard coded the sync with the 3 possible vectors, this patch incorporates more flexibility for the future and aligns with how igb stores the number of vectors into the adapter structure. CC: Jean Delvare <jdelvare@suse.de> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Florian Mickler authored
The pm_qos_add_request call has to register the pm_qos request with the pm_qos susbsystem before first use of the pm_qos request via pm_qos_update_request. As pm_qos changed to use plists there is no benefit in registering and unregistering the pm_qos request on ifup/ifdown and thus we move the registering into e1000_open and the unregistering in e1000_close. This fixes the following warning: [ 1.786060] WARNING: at kernel/pm_qos_params.c:264 pm_qos_update_request+0x28/0x54() [ 1.786088] Hardware name: Latitude E6500 [ 1.787045] pm_qos_update_request() called for unknown object [ 1.787966] Modules linked in: [ 1.788940] Pid: 1, comm: swapper Not tainted 2.6.35-rc5-mmotm0719 #1 [ 1.790035] Call Trace: [ 1.791121] [<ffffffff81037335>] warn_slowpath_common+0x80/0x98 [ 1.792205] [<ffffffff810373e1>] warn_slowpath_fmt+0x41/0x43 [ 1.793279] [<ffffffff81057c14>] pm_qos_update_request+0x28/0x54 [ 1.794347] [<ffffffff8134889e>] e1000_configure+0x421/0x459 [ 1.795393] [<ffffffff8134afbd>] e1000_open+0xbd/0x37c [ 1.796436] [<ffffffff8105743a>] ? raw_notifier_call_chain+0xf/0x11 [ 1.797491] [<ffffffff8145f948>] __dev_open+0xae/0xe2 [ 1.798547] [<ffffffff8145f997>] dev_open+0x1b/0x49 [ 1.799612] [<ffffffff8146e36e>] netpoll_setup+0x84/0x259 [ 1.800685] [<ffffffff81b5037c>] init_netconsole+0xbc/0x21f [ 1.801744] [<ffffffff81b5026c>] ? sir_wq_init+0x0/0x35 [ 1.802793] [<ffffffff81b502c0>] ? init_netconsole+0x0/0x21f [ 1.803845] [<ffffffff810002ff>] do_one_initcall+0x7a/0x12f [ 1.804885] [<ffffffff81b2ccae>] kernel_init+0x138/0x1c2 [ 1.805915] [<ffffffff81003554>] kernel_thread_helper+0x4/0x10 [ 1.806937] [<ffffffff81590e00>] ? restore_args+0x0/0x30 [ 1.807955] [<ffffffff81b2cb76>] ? kernel_init+0x0/0x1c2 [ 1.808958] [<ffffffff81003550>] ? kernel_thread_helper+0x0/0x10 [ 1.809958] ---[ end trace 84b562a00a60539e ]--- Signed-off-by:
Florian Mickler <florian@mickler.org> Tested-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by:
-
Changli Gao authored
6c79bf0f subtracts PPPOE_SES_HLEN from mtu at the front of ip_fragment(). So the later subtraction should be removed. The MTU of 802.1q is also 1500, so MTU should not be changed. Signed-off-by:
Bart De Schuymer <bdschuym@pandora.bo> ---- net/ipv4/ip_output.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) Signed-off-by:
-
Josh Hunt authored
Initial TCP thin-stream commit did not add getsockopt support for the new socket options: TCP_THIN_LINEAR_TIMEOUTS and TCP_THIN_DUPACK. This adds support for them. Signed-off-by:
Josh Hunt <johunt@akamai.com> Tested-by:
Andreas Petlund <apetlund@simula.no> Acked-by:
-
- 02 Aug, 2010 17 commits
-
-
Dimitris Michailidis authored
Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
-
Dimitris Michailidis authored
Signed-off-by:
-
Dimitris Michailidis authored
Signed-off-by:
-
Dimitris Michailidis authored
Add support for running the driver on any PCI function. Mostly this entails replacing a constant 0 in a number of calls with the variable function number. Signed-off-by:
-
Dimitris Michailidis authored
The device supports TSO+ECN. Signed-off-by:
-
Dimitris Michailidis authored
Get info about the availability of Tx on-chip queues from FW and if they are supported set up a memory window for them. iw_cxgb4 will be using them. Move the existing window setup later in the init sequence, after we have collected the new info. Signed-off-by:
-
Dimitris Michailidis authored
Commit 1704d748 ("cxgb4vf: small changes to message processing structures/macros") was incomplete and causes cxgb4 to write bad TSO descriptors. Fix that up by reverting the offending part of that commit and adjusting field accesses now that they are one level deeper. Signed-off-by:
-
Dimitris Michailidis authored
The checksum provided by the device doesn't include the L3 headers, as IPv6 expects. Signed-off-by:
-
Dimitris Michailidis authored
Signed-off-by:
-
Dan Carpenter authored
There was an error path where "mem_ptr_virt" didn't get unmapped. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Krzysztof Hałasa authored
SBE 2T3E3 cards use DECchips 21143 but they need a different driver. Don't even try to use a normal tulip driver with them. Signed-off-by:
Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by:
-
Joe Perches authored
Remove locally defined equivalents Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
-
Matt Carlson authored
This patch updates the tg3 version to 3.113. Reviewed-by:
Benjamin Li <benli@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
-
Matt Carlson authored
This patch moves most of the phy related flag definitions over to the phyflags member and changes the code accordingly. Reviewed-by:
-
Matt Carlson authored
This patch deletes the link_config.phy_is_low_power flag and creates a new phy_flags device member to store all phy related settings. All the code is converted accordingly. Reviewed-by:
-
Matt Carlson authored
This patch replaces some instances of hardcoded phy register values with preprocessor equivalents. Reviewed-by:
-
