- 18 Jun, 2017 15 commits
-
-
NeilBrown authored
A rescuing bioset is only useful if there might be bios from that same bioset on the bio_list_on_stack queue at a time when bio_alloc_bioset() is called. This never applies to q->bio_split. Allocations from q->bio_split are only ever made from blk_queue_split() which is only ever called early in each of various make_request_fn()s. The original bio (call this A) is then passed to generic_make_request() and is placed on the bio_list_on_stack queue, and the bio that was allocated from q->bio_split (B) is processed. The processing of this may cause other bios to be passed to generic_make_request() or may even cause the bio B itself to be passed, possible after some prefix has been split off (using some other bioset). generic_make_request() now guarantees that all of these bios (B and dependants) will be fully processed before the tail of the original bio A gets handled. None of these early bios can possible trigger an allocation from the original q->bio_split as they are either too small to require splitting or (more likely) are destined for a different queue. The next time that the original q->bio_split might be used by this thread is when A is processed again, as it might still be too big to handle directly. By this time there cannot be any other bios allocated from q->bio_split in the generic_make_request() queue. So no rescuing will ever be needed. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
NeilBrown authored
This patch converts bioset_create() to not create a workqueue by default, so alloctions will never trigger punt_bios_to_rescuer(). It also introduces a new flag BIOSET_NEED_RESCUER which tells bioset_create() to preserve the old behavior. All callers of bioset_create() that are inside block device drivers, are given the BIOSET_NEED_RESCUER flag. biosets used by filesystems or other top-level users do not need rescuing as the bio can never be queued behind other bios. This includes fs_bio_set, blkdev_dio_pool, btrfs_bioset, xfs_ioend_bioset, and one allocated by target_core_iblock.c. biosets used by md/raid do not need rescuing as their usage was recently audited and revised to never risk deadlock. It is hoped that most, if not all, of the remaining biosets can end up being the non-rescued version. Reviewed-by:
-
NeilBrown authored
"flags" arguments are often seen as good API design as they allow easy extensibility. bioset_create_nobvec() is implemented internally as a variation in flags passed to __bioset_create(). To support future extension, make the internal structure part of the API. i.e. add a 'flags' argument to bioset_create() and discard bioset_create_nobvec(). Note that the bio_split allocations in drivers/md/raid* do not need the bvec mempool - they should have used bioset_create_nobvec(). Suggested-by:
Christoph Hellwig <hch@infradead.org> Reviewed-by:
-
NeilBrown authored
blk_queue_split() is always called with the last arg being q->bio_split, where 'q' is the first arg. Also blk_queue_split() sometimes uses the passed-in 'bs' and sometimes uses q->bio_split. This is inconsistent and unnecessary. Remove the last arg and always use q->bio_split inside blk_queue_split() Reviewed-by:
Javier González <javier@cnexlabs.com> Tested-by:
-
Christoph Hellwig authored
Move most code into blk_mq_rq_ctx_init, and the rest into blk_mq_get_request. Signed-off-by:
-
Christoph Hellwig authored
This patch makes sure we always allocate requests in the core blk-mq code and use a common prepare_request method to initialize them for both mq I/O schedulers. For Kyber and additional limit_depth method is added that is called before allocating the request. Also because none of the intializations can really fail the new method does not return an error - instead the bfq finish method is hardened to deal with the no-IOC case. Last but not least this removes the abuse of RQF_QUEUE by the blk-mq scheduling code as RQF_ELFPRIV is all that is needed now. Signed-off-by:
-
Christoph Hellwig authored
blk_mq_sched_assign_ioc now only handles the assigned of the ioc if the schedule needs it (bfq only at the moment). The caller to the per-request initializer is moved out so that it can be merged with a similar call for the kyber I/O scheduler. Signed-off-by:
-
Christoph Hellwig authored
icq_to_bic is a container_of operation, so we need to check for NULL before it. Also move the check outside the spinlock while we're at it. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Merge three functions only tail-called by blk_mq_free_request into blk_mq_free_request. Signed-off-by:
-
Christoph Hellwig authored
No need to have two different callouts of bfq vs kyber. Signed-off-by:
-
Christoph Hellwig authored
Having these as separate helpers in a header really does not help readability, or my chances to refactor this code sanely. Signed-off-by:
-
Christoph Hellwig authored
Having them out of line in blk-mq-sched.c just makes the code flow unnecessarily complicated. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
NeilBrown authored
When a filesystem is mounted from a loop device, writes are throttled by balance_dirty_pages() twice: once when writing to the filesystem and once when the loop_handle_cmd() writes to the backing file. This double-throttling can trigger positive feedback loops that create significant delays. The throttling at the lower level is seen by the upper level as a slow device, so it throttles extra hard. The PF_LESS_THROTTLE flag was created to handle exactly this circumstance, though with an NFS filesystem mounted from a local NFS server. It reduces the throttling on the lower layer so that it can proceed largely unthrottled. To demonstrate this, create a filesystem on a loop device and write (e.g. with dd) several large files which combine to consume significantly more than the limit set by /proc/sys/vm/dirty_ratio or dirty_bytes. Measure the total time taken. When I do this directly on a device (no loop device) the total time for several runs (mkfs, mount, write 200 files, umount) is fairly stable: 28-35 seconds. When I do this over a loop device the times are much worse and less stable. 52-460 seconds. Half below 100seconds, half above. When I apply this patch, the times become stable again, though not as fast as the no-loop-back case: 53-72 seconds. There may be room for further improvement as the total overhead still seems too high, but this is a big improvement. Reviewed-by:
Ming Lei <tom.leiming@gmail.com> Suggested-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Jens Axboe <axboe@fb.com>
-
- 16 Jun, 2017 4 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe changes for 4.13 from Christoph: Highlights: - UUID identifier support from Johannes - Lots of cleanups from Sagi - Host Memory Buffer support from me And lots of cleanups and smaller fixes of course. Note that the UUID identifier changes are based on top of the uuid tree. I am the maintainer of that tree and will send it to Linus as soon as 4.12 is released as various other trees depend on it as well (and the diffstat includes those changes unfortunately)
-
Arvind Yadav authored
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 8908 1096 624 10628 2984 drivers/block/swim3.o File size after constify swim3_match: text data bss dec hex filename 9708 296 624 10628 2984 drivers/block/swim3.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Bart Van Assche authored
This patch fixes two sparse warnings introduced by the "dedicated error codes for the block layer V3" patch series. These changes have not been tested. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
-
Scott Bauer authored
The NVMe 1.3 spec introduces Namespace Optimal IO Boundaries (NOIOB), which standardizes the stripe mechanism we currently have quirks for. This patch implements the necessary logic to handle this new feature. Signed-off-by:
Scott Bauer <scott.bauer@intel.com> Signed-off-by:
-
- 15 Jun, 2017 21 commits
-
-
Sagi Grimberg authored
Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Christoph Hellwig authored
We don't need to wait for the reset from the delayed work item that is kicked off when we don't get a keepalive. Signed-off-by:
-
Christoph Hellwig authored
This moves the nvme_reset function from the PCIe driver to common code, renaming it to nvme_reset_ctrl in the process. Additionally a new helper nvme_reset_ctrl_sync is added for the case where we want to wait for the reset. To facilitate that the reset_work work structure is move to the common nvme_ctrl structure and the ->reset_ctrl method is removed. For now the drivers initialize the reset_work with their own callback, but longer term we should move to callouts for specific parts of the reset process and move even more code to the core. Signed-off-by:
-
Christoph Hellwig authored
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
Christoph Hellwig authored
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by:
-
Christoph Hellwig authored
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by:
-
Christoph Hellwig authored
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by:
-
Christoph Hellwig authored
It only applies to read/write commands, and this way non-PCIe drivers get the check as well instead of having to duplicate it when adding metadata support. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
-
Christoph Hellwig authored
And open code the SHUTDOWN_TIMEOUT macro. Signed-off-by:
-
Dan Carpenter authored
We accidentally return ERR_PTR(0) which is NULL. The caller isn't explicitly checking for that but I couldn't immediately spot whether this would lead to a NULL dereference. Anyway, we can fix add an error code easily enough. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Guan Junxiong authored
To let the host know what happends to the connection establishment, adjust the behavior of nvmf_log_connect_error to make more connect specifig error codes human-readble. Signed-off-by:
Guan Junxiong <guanjunxiong@huawei.com> Reviewed-by:
-
Guan Junxiong authored
Add the new to NVMe 1.3 fields EDSTT, DSTO, FWUG, HCTMA, MNTMT, MXTMT, and SANICAP into the idenfity controller data structure. Signed-off-by:
-
Bart Van Assche authored
This was detected by building the nvmet-fc driver with W=1. Signed-off-by:
-
Johannes Thumshirn authored
Change the few left over users of ctrl->dev over to using ctrl->device for logging purposes, so we consistently use the same device. Signed-off-by:
-
Johannes Thumshirn authored
Allow overriding the announced NVMe Version of a via configfs. This is particularly helpful when debugging new features for the host or target side without bumping the hard coded version (as the target might not be fully compliant to the announced version yet). Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Johannes Thumshirn authored
Add the UUID field from the NVMe Namespace Identification Descriptor to the nvmet_ns structure and allow it's population via configfs. Signed-off-by:
-
Johannes Thumshirn authored
A NVMe Identify NS command with a CNS value of '3' is expecting a list of Namespace Identification Descriptor structures to be returned to the host for the namespace requested in the namespace identify command. This Namespace Identification Descriptor structure consists of the type of the namespace identifier, the length of the identifier and the actual identifier. Valid types are NGUID and UUID which we have saved in our nvme_ns structure if they have been configured via configfs. If no value has been assigened to one of these we return an "invalid opcode" back to the host to maintain backward compatibiliy with older implementations without Namespace Identify Descriptor list support. Also as the Namespace Identify Descriptor list is the only mandatory feature change between 1.2.1 and 1.3 we can bump the advertised version as well. Signed-off-by:
-
Johannes Thumshirn authored
Now that we have a way for getting the UUID from a target, provide it to userspace as well. Unfortunately there is already a sysfs attribute called UUID which is a misnomer as it holds the NGUID value. So instead of creating yet another wrong name, create a new 'nguid' sysfs attribute for the NGUID. For the UUID attribute add a check wheter the namespace has a UUID assigned to it and return this or return the NGUID to maintain backwards compatibility. This should give userspace a chance to catch up. Signed-off-by:
Sagi Grimberg <sagi@rimberg.me> Signed-off-by:
-
Johannes Thumshirn authored
If a target identifies itself as NVMe 1.3 compliant, try to get the list of Namespace Identification Descriptors and populate the UUID, NGUID and EUI64 fileds in the NVMe namespace structure with these values. Signed-off-by:
-
Johannes Thumshirn authored
The uuid field in the nvme_ns structure represents the nguid field from the identify namespace command. And as NVMe 1.3 introduced an UUID in the NVMe Namespace Identification Descriptor this will collide. So rename the uuid to nguid to prevent any further confusion. Unfortunately we export the nguid to sysfs in the uuid sysfs attribute, but this can't be changed anymore without possibly breaking existing userspace. Signed-off-by:
-
Johannes Thumshirn authored
Signed-off-by:
-
