- 13 Jul, 2018 33 commits
-
-
Hugo Hu authored
Signed-off-by:
Hugo Hu <hugo.hu@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tony Cheng authored
Signed-off-by:
Tony Cheng <tony.cheng@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Hersen Wu authored
function description get/ set DP configuration: lane_count, link_rate, spread_spectrum valid lane count value: 1, 2, 4 valid link rate value: 06h = 1.62Gbps per lane 0Ah = 2.7Gbps per lane 0Ch = 3.24Gbps per lane 14h = 5.4Gbps per lane 1Eh = 8.1Gbps per lane debugfs is located at /sys/kernel/debug/dri/0/DP-x/link_settings --- to get dp configuration xxd -l 300 phy_settings It will list current, verified, reported, preferred dp configuration. current -- for current video mode verified --- maximum configuration which pass link training reported --- DP rx report caps (DPCD register offset 0, 1 2) preferred --- user force settings --- set (or force) dp configuration echo <lane_count> <link_rate> for example, to force to 2 lane, 2.7GHz, echo 4 0xa > link_settings spread_spectrum could not be changed dynamically. in case invalid lane count, link rate are force, no hw programming will be done. please check link settings after force operation to see if HW get programming. xxd -l 300 link_settings check current and preferred settings. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
Tony Cheng authored
in case we have very few pins in the table, check fails and we can't boot Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Tony Cheng authored
add generic indirect register access following our register access pattern this will make it easier to review code and programming sequence, with all the complexity hidden in macro Signed-off-by:
-
Tony Cheng authored
[WHY] we were using 6 instances based on i2caux_dce110.c [HOW] pass in how many instances to ctor Signed-off-by:
-
Charlene Liu authored
Signed-off-by:
-
Hersen Wu authored
expose dc function to be called by linux dm Signed-off-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
-
Krunoslav Kovac authored
DCN allows cursor multiplier when blending FP16 surface. Signed-off-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Eric Yang authored
[Why] Megachip dockings accesses ddc line through display driver when installing FW. Previously, we would fail every transaction because link attached to mst branch did not have their ddc transaction type set. [How] Set ddc transaction type when mst branch is connected. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
-
Tony Cheng authored
Signed-off-by:
-
Eric Bernstein authored
Separate HUBP surface size and rotation/mirror programming so that HUBP revision without mirror/rotation do not access those register fields. Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
-
Harry Wentland authored
This reverts commit cc195141. This commit was problematic on other OSes. The real solution is to leave all the error checking to DRM and don't do it in DC, which is addressed by "Return aux replies directly to DRM" later in this patchset. v2: Add reason for revert. Signed-off-by:
-
Harry Wentland authored
This reverts commit 8a61bc08. Need to revert "make dm_dp_aux_transfer return payload bytes instead of size", which this commit is based on. That commit was problematic on other OSes. The real solution is to leave all the error checking to DRM and don't do it in DC, which is addressed by "Return aux replies directly to DRM" later in this patchset. v2: Add reason for revert. Signed-off-by:
-
Michel Dänzer authored
This shouldn't happen, but if it does, we'll get a backtrace of the caller, and update the pin_size values as needed. v2: * Check bo->pin_count instead of placement flags (Christian König) Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Michel Dänzer authored
Concurrent execution of the non-atomic arithmetic could result in completely bogus values. v2: * Rebased on v2 of the previous patch Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/106872Reviewed-by:
-
Michel Dänzer authored
Instead of CPU invisible VRAM. Preparation for the following, no functional change intended. v2: * Also change amdgpu_vram_mgr_bo_invisible_size to amdgpu_vram_mgr_bo_visible_size, allowing further simplification (Christian König) Cc: stable@vger.kernel.org Reviewed-by:
-
Nayan Deshmukh authored
replace run queue by a list of run queues and remove the sched arg as that is part of run queue itself Signed-off-by:
Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Nayan Deshmukh authored
This patch is in preparation for a better load balancing in scheduler. It allows us to associate entities with the run queues instead of binding them to a scheduler. Signed-off-by:
-
Christian König authored
We are initializing the entity before the scheduler is actually initialized. This can lead to all kind of problem, but especially NULL pointer deref because of Nayan's scheduler work. Signed-off-by:
-
Andrey Grodzovsky authored
Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
Andrey Grodzovsky authored
Stop using 'magic numbers' when registering interrupt sources. v2: Switch to kernel style comments. v3: Rebase. Signed-off-by:
-
Andrey Grodzovsky authored
v2: Rebase v3: Use defines for CP_SQ and CP_ECC_ERROR interrupts. Signed-off-by:
-
Andrey Grodzovsky authored
Stop using 'magic numbers' when registering interrupt sources. v2: Clean redundant comments. Switch to kernel style comments. v3: Add CP_ECC_ERROR define Signed-off-by:
-
Evan Quan authored
Convert the clocks into right Mhz unit. Otherwise, it will miss the equal situation. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Evan Quan authored
Gfxoff feature for vega12 is workable. So, there is no need to mask it any more. Signed-off-by:
-
Evan Quan authored
Export apis for enabling/disabling SMU gfxoff support. v2: fit the latest gfxoff support framework v3: add feature_mask control Signed-off-by:
-
Evan Quan authored
Gfxoff feature may depends on the CGCG(on vega12, that's the case). This change will help to enable gfxoff feature more frequently. Signed-off-by:
-
Evan Quan authored
On vega12, the bit0 of RLC_CGTT_MGCG_OVERRIDE is reserved. Signed-off-by:
-
Evan Quan authored
SMU owns this register so the driver should not set it to avoid breaking gfxoff. v2: update description Signed-off-by:
-
Evan Quan authored
The save restore list initialization does not have to be pg guarded. And for some asic(e.g. Vega12), it does not have cntl/gpm/srm lists. Signed-off-by:
-
Evan Quan authored
CSIB init has no relation with rlc version and pg status. It should be needed regardless of them. Signed-off-by:
-
Evan Quan authored
Without this pin, the csb buffer will be filled with inconsistent data after S3 resume. And that will causes gfx hang on gfxoff exit since this csb will be executed then. v2: fit amdgpu_bo_pin change(take one less argument) Signed-off-by:
-
- 10 Jul, 2018 7 commits
-
-
kbuild test robot authored
drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c:1209:17-18: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: ea870e44 ("drm/amd/pp: Export notify_smu_enable_pwe to display") CC: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Leo Liu authored
Fixes: 22cc6c5e (drm/amdgpu: Add runtime VCN PG support) Signed-off-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
-
Leo Liu authored
To make register read/write reliable Signed-off-by:
-
Leo Liu authored
VCN won't get power off when only jpeg active Signed-off-by:
-
Thomas Zimmermann authored
A call to ttm_bo_unref() clears the supplied pointer to NULL, while ttm_bo_put() does not. None of the converted call sites requires the pointer to become NULL, so the respective assign operations has been left out from the patch. Signed-off-by:
Thomas Zimmermann <contact@tzimmermann.org> Reviewed-by:
-
Thomas Zimmermann authored
Signed-off-by:
-
Thomas Zimmermann authored
The TTM buffer-object interface provides ttm_bo_reference() and ttm_bo_unref() for managing reference counts. Replacing them with ttm_bo_get() and ttm_bo_put() aligns the API with conventions used throughout the Linux kernel. The implementation of ttm_bo_unref() clears the supplied pointer to NULL. This leads to workarounds where the caller saves the pointer's value before de-referencing the BO. ttm_bo_put() does not clear the supplied pointer. Signed-off-by:
-
