- 07 Aug, 2018 14 commits
-
-
Christophe Leroy authored
The generic implementation of strlen() reads strings byte per byte. This patch implements strlen() in assembly based on a read of entire words, in the same spirit as what some other arches and glibc do. On a 8xx the time spent in strlen is reduced by 3/4 for long strings. strlen() selftest on an 8xx provides the following values: Before the patch (ie with the generic strlen() in lib/string.c): len 256 : time = 1.195055 len 016 : time = 0.083745 len 008 : time = 0.046828 len 004 : time = 0.028390 After the patch: len 256 : time = 0.272185 ==> 78% improvment len 016 : time = 0.040632 ==> 51% improvment len 008 : time = 0.033060 ==> 29% improvment len 004 : time = 0.029149 ==> 2% degradation On a 832x: Before the patch: len 256 : time = 0.236125 len 016 : time = 0.018136 len 008 : time = 0.011000 len 004 : time = 0.007229 After the patch: len 256 : time = 0.094950 ==> 60% improvment len 016 : time = 0.013357 ==> 26% improvment len 008 : time = 0.010586 ==> 4% improvment len 004 : time = 0.008784 Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
This patch adds a test for strlen() string.c contains a copy of strlen() from lib/string.c The test first tests the correctness of strlen() by comparing the result with libc strlen(). It tests all cases of alignment. It them tests the duration of an aligned strlen() on a 4 bytes string, on a 16 bytes string and on a 256 bytes string. Signed-off-by:
-
Christophe Leroy authored
This patch renames memcmp test to memcmp_64 and adds a memcmp_32 test for testing the 32 bits version of memcmp() Signed-off-by:
-
Mahesh Salgaonkar authored
rtas_log_buf is a buffer to hold RTAS event data that are communicated to kernel by hypervisor. This buffer is then used to pass RTAS event data to user through proc fs. This buffer is allocated from vmalloc (non-linear mapping) area. On Machine check interrupt, register r3 points to RTAS extended event log passed by hypervisor that contains the MCE event. The pseries machine check handler then logs this error into rtas_log_buf. The rtas_log_buf is a vmalloc-ed (non-linear) buffer we end up taking up a page fault (vector 0x300) while accessing it. Since machine check interrupt handler runs in NMI context we can not afford to take any page fault. Page faults are not honored in NMI context and causes kernel panic. Apart from that, as Nick pointed out, pSeries_log_error() also takes a spin_lock while logging error which is not safe in NMI context. It may endup in deadlock if we get another MCE before releasing the lock. Fix this by deferring the logging of rtas error to irq work queue. Current implementation uses two different buffers to hold rtas error log depending on whether extended log is provided or not. This makes bit difficult to identify which buffer has valid data that needs to logged later in irq work. Simplify this using single buffer, one per paca, and copy rtas log to it irrespective of whether extended log is provided or not. Allocate this buffer below RMA region so that it can be accessed in real mode mce handler. Fixes: b96672dd ("powerpc: Machine check interrupt is a non-maskable interrupt") Cc: stable@vger.kernel.org # v4.14+ Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Mahesh Salgaonkar authored
The global mce data buffer that used to copy rtas error log is of 2048 (RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read extended_log_length from rtas error log header, then use max of extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied. Ideally the platform (phyp) will never send extended error log with size > 2048. But if that happens, then we have a risk of buffer overrun and corruption. Fix this by using min_t instead. Fixes: d368514c ("powerpc: Fix corruption when grabbing FWNMI data") Reported-by:
Michal Suchanek <msuchanek@suse.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
It's identical to xive_teardown_cpu() so just use the latter Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Those overly verbose statement in the setup of the pool VP aren't particularly useful (esp. considering we don't actually use the pool, we configure it bcs HW requires it only). So remove them which improves the code readability. Signed-off-by:
-
Nicholas Piggin authored
The kernel page table caches are tied to init_mm, so there is no more need for them after userspace is finished. destroy_context() gets called when we drop the last reference for an mm, which can be much later than the task exit due to other lazy mm references to it. We can free the page table cache pages on task exit because they only cache the userspace page tables and kernel threads should not access user space addresses. The mapping for kernel threads itself is maintained in init_mm and page table cache for that is attached to init_mm. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Merge change log additions from Aneesh] Signed-off-by:
-
Nicholas Piggin authored
When the mm is being torn down there will be a full PID flush so there is no need to flush the TLB on page size changes. Signed-off-by:
-
Michael Ellerman authored
Some of these long running tests can time out on heavily loaded systems, give them longer to run. Signed-off-by: -
Michael Ellerman authored
These tests are currently failing on (some) big endian systems. Until we can fix that, skip them unless we're on ppc64le. Signed-off-by: -
Michael Ellerman authored
Some of our selftests have only been tested on ppc64le and crash or behave weirdly on ppc64/ppc32. So add a helper for checking the UTS machine. Signed-off-by: -
Michael Ellerman authored
This makes it easy to run checkpatch with settings that I like. Usage is eg: $ ./arch/powerpc/tools/checkpatch.sh -g origin/master.. To check all commits since origin/master. Signed-off-by:
Russell Currey <ruscur@russell.cc>
-
Michael Ellerman authored
We recently added a warning in arch_local_irq_restore() to check that the soft masking state matches reality. Unfortunately it trips in a few places, which are not entirely trivial to fix. The key problem is if we're doing function_graph tracing of restore_math(), the warning pops and then seems to recurse. It's not entirely clear because the system continuously oopses on all CPUs, with the output interleaved and unreadable. It's also been observed on a G5 coming out of idle. Until we can fix those cases disable the warning for now. Signed-off-by:
-
- 03 Aug, 2018 4 commits
-
-
Reza Arbab authored
We've encountered a performance issue when multiple processors stress {get,put}_mmio_atsd_reg(). These functions contend for mmio_atsd_usage, an unsigned long used as a bitmask. The accesses to mmio_atsd_usage are done using test_and_set_bit_lock() and clear_bit_unlock(). As implemented, both of these will require a (successful) stwcx to that same cache line. What we end up with is thread A, attempting to unlock, being slowed by other threads repeatedly attempting to lock. A's stwcx instructions fail and retry because the memory reservation is lost every time a different thread beats it to the punch. There may be a long-term way to fix this at a larger scale, but for now resolve the immediate problem by gating our call to test_and_set_bit_lock() with one to test_bit(), which is obviously implemented without using a store. Fixes: 1ab66d1f ("powerpc/powernv: Introduce address translation services for Nvlink2") Signed-off-by:Reza Arbab <arbab@linux.ibm.com> Acked-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
-
Christoph Hellwig authored
kernel/dma/Kconfig already defines NEED_DMA_MAP_STATE, just select it from CONFIG_PPC using the same condition as an if guard. Signed-off-by:
Christoph Hellwig <hch@lst.de> [mpe: Move it under PPC] Signed-off-by:
-
Guenter Roeck authored
An arbitrary error in ppc4xx_msi_probe() quite likely results in a crash similar to the following, seen after dma_alloc_coherent() returned an error. Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc001bff0 Oops: Kernel access of bad area, sig: 11 [#1] BE Canyonlands Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc6-00010-gff33d1030a6c #1 NIP: c001bff0 LR: c001c418 CTR: c01faa7c REGS: cf82db40 TRAP: 0300 Tainted: G W (4.18.0-rc6-00010-gff33d1030a6c) MSR: 00029000 <CE,EE,ME> CR: 28002024 XER: 00000000 DEAR: 00000000 ESR: 00000000 GPR00: c001c418 cf82dbf0 cf828000 cf8de400 00000000 00000000 000000c4 000000c4 GPR08: c0481ea4 00000000 00000000 000000c4 22002024 00000000 c00025e8 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0492380 0000004a GPR24: 00029000 0000000c 00000000 cf8de410 c0494d60 c0494d60 cf8bebc0 00000001 NIP [c001bff0] ppc4xx_of_msi_remove+0x48/0xa0 LR [c001c418] ppc4xx_msi_probe+0x294/0x3b8 Call Trace: [cf82dbf0] [00029000] 0x29000 (unreliable) [cf82dc10] [c001c418] ppc4xx_msi_probe+0x294/0x3b8 [cf82dc70] [c0209fbc] platform_drv_probe+0x40/0x9c [cf82dc90] [c0208240] driver_probe_device+0x2a8/0x350 [cf82dcc0] [c0206204] bus_for_each_drv+0x60/0xac [cf82dcf0] [c0207e88] __device_attach+0xe8/0x160 [cf82dd20] [c02071e0] bus_probe_device+0xa0/0xbc [cf82dd40] [c02050c8] device_add+0x404/0x5c4 [cf82dd90] [c0288978] of_platform_device_create_pdata+0x88/0xd8 [cf82ddb0] [c0288b70] of_platform_bus_create+0x134/0x220 [cf82de10] [c0288bcc] of_platform_bus_create+0x190/0x220 [cf82de70] [c0288cf4] of_platform_bus_probe+0x98/0xec [cf82de90] [c0449650] __machine_initcall_canyonlands_ppc460ex_device_probe+0x38/0x54 [cf82dea0] [c0002404] do_one_initcall+0x40/0x188 [cf82df00] [c043daec] kernel_init_freeable+0x130/0x1d0 [cf82df30] [c0002600] kernel_init+0x18/0x104 [cf82df40] [c000c23c] ret_from_kernel_thread+0x14/0x1c Instruction dump: 90010024 813d0024 2f890000 83c30058 41bd0014 48000038 813d0024 7f89f800 409d002c 813e000c 57ea103a 3bff0001 <7c69502e> 2f830000 419effe0 4803b26d ---[ end trace 8cf551077ecfc42a ]--- Fix it up. Specifically, - Return valid error codes from ppc4xx_setup_pcieh_hw(), have it clean up after itself, and only access hardware after all possible error conditions have been handled. - Use devm_kzalloc() instead of kzalloc() in ppc4xx_msi_probe() Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Nicholas Piggin authored
Commit 9c7b185a ("powernv/cpuidle: Parse dt idle properties into global structure") parses dt idle states into structs, but never marks them valid. This results in all idle states being lost. Fixes: 9c7b185a ("powernv/cpuidle: Parse dt idle properties into global structure") Signed-off-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Signed-off-by:
-
- 31 Jul, 2018 16 commits
-
-
Sam Bobroff authored
EEH recovery currently fails on pSeries for some IOV capable PCI devices, if CONFIG_PCI_IOV is on and the hypervisor doesn't provide certain device tree properties for the device. (Found on an IOV capable device using the ipr driver.) Recovery fails in pci_enable_resources() at the check on r->parent, because r->flags is set and r->parent is not. This state is due to sriov_init() setting the start, end and flags members of the IOV BARs but the parent not being set later in pseries_pci_fixup_iov_resources(), because the "ibm,open-sriov-vf-bar-info" property is missing. Correct this by zeroing the resource flags for IOV BARs when they can't be configured (this is the same method used by sriov_init() and __pci_read_base()). VFs cleared this way can't be enabled later, because that requires another device tree property, "ibm,number-of-configurable-vfs" as well as support for the RTAS function "ibm_map_pes". These are all part of hypervisor support for IOV and it seems unlikely that a hypervisor would ever partially, but not fully, support it. (None are currently provided by QEMU/KVM.) Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by:
Bryant G. Ly <bryantly@linux.ibm.com> Signed-off-by:
-
Shilpasri G Bhat authored
OPAL firmware provides the facility for some groups of sensors to be enabled/disabled at runtime to give the user the option of using the system resources for collecting these sensors or not. For example, on POWER9 systems, the On Chip Controller (OCC) gathers various system and chip level sensors and maintains their values in main memory. This patch provides support for enabling/disabling the sensor groups like power, temperature, current and voltage. Signed-off-by:
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> [stewart@linux.vnet.ibm.com: Commit message] Acked-by:
-
Shilpasri G Bhat authored
Adds support to enable/disable a sensor group at runtime. This can be used to select the sensor groups that needs to be copied to main memory by OCC. Sensor groups like power, temperature, current, voltage, frequency, utilization can be enabled/disabled at runtime. Signed-off-by:
-
Akshay Adiga authored
Export pnv_idle_states and nr_pnv_idle_states so that its accessible to cpuidle driver. Use properties from pnv_idle_states structure for powernv cpuidle_init. Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Akshay Adiga authored
Device-tree parsing happens twice, once while deciding idle state to be used for hotplug and once during cpuidle init. Hence, parsing the device tree and caching it will reduce code duplication. Parsing code has been moved to pnv_parse_cpuidle_dt() from pnv_probe_idle_states(). In addition to the properties in the device tree the number of available states is also required. Signed-off-by:
-
Finn Thain authored
Some of the event counters are overloaded which makes it very difficult to interpret their values. Counter 0 is supposed to report CB1 interrupts but it can also count PMU_INT_WAITING_CHARGER events. Counter 1 is supposed to report GPIO interrupts but it can also count other events (depending upon the value of the PMU_INT_ADB bit). Disambiguate these statistics with dedicated counters for GPIO and CB1 interrupts. Comments in the MkLinux source code say that the type 0 and type 1 interrupts are model-specific. Label them as "unknown". This change to the contents of /proc/pmu/interrupts is by necessity visible in userland. However, packages which interact with the PMU (that is, pbbuttonsd, pmac-utils and pmud) don't open this file. AFAIK, user software has no need to poll these counters. Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
Replace an open-coded ffs() with the function call. Simplify an if-else cascade using a switch statement. Correct a typo and an indentation issue. Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Finn Thain authored
Now that the PowerMac via-pmu driver supports m68k PowerBooks, switch over to that driver and remove the via-pmu68k driver. Tested-by:
-
Finn Thain authored
Don't load the via-pmu68k driver on early PowerBooks. The M50753 PMU device found in those models was never supported by this driver. Attempting to load the driver usually causes a boot hang. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Acked-by:
-
Finn Thain authored
At present, CONFIG_ADB_PMU depends on CONFIG_PPC_PMAC. When this gets relaxed to CONFIG_PPC_PMAC || CONFIG_MAC, those Kconfig symbols with implicit deps on PPC_PMAC will need explicit deps. Add them now. No functional change. Tested-by:
-
Finn Thain authored
Put #ifdefs around the Open Firmware, xmon, interrupt dispatch, battery and suspend code. Add the necessary interrupt handling to support m68k PowerBooks. The pmu_kind value is available to userspace using the PMU_IOC_GET_MODEL ioctl. It is not clear yet what hardware classes are be needed to describe m68k PowerBook models, so pmu_kind is given the provisional value PMU_UNKNOWN. To find out about the hardware, user programs can use /proc/bootinfo or /proc/hardware, or send the PMU_GET_VERSION command using /dev/adb. Tested-by:
-
Finn Thain authored
On most PowerPC Macs, the PMU driver uses the shift register and IO port B from a single VIA chip. On 68k and early PowerPC PowerBooks, the driver uses the shift register from one VIA chip together with IO port B from another. Replace via with via1 and via2 to accommodate this. For the CONFIG_PPC_PMAC case, set via1 = via2 so there is no change. Tested-by:
-
Finn Thain authored
On 68k Macs, the via/vias pointer can't be used to determine whether the PMU driver has been initialized. For portability, add a new state to indicate that via_find_pmu() succeeded. After via_find_pmu() executes, testing vias == NULL is equivalent to testing via == NULL. Replace these tests with pmu_state == uninitialized which is simpler and more consistent. No functional change. Tested-by:
-
Finn Thain authored
The shift register interrupt flag gets cleared in via_pmu_interrupt() and once again in pmu_sr_intr(). Fix this theoretical race condition. Tested-by:
-
Finn Thain authored
Add missing in_8() accessors to init_pmu() and pmu_sr_intr(). This fixes several sparse warnings: drivers/macintosh/via-pmu.c:536:29: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:537:33: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1455:17: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1456:69: warning: dereference of noderef expression Tested-by:
-
Finn Thain authored
The pmu_init() function has the __init qualifier, but the ops struct that holds a pointer to it does not. This causes a build warning. The driver works fine because the pointer is only dereferenced early. The function is so small that there's negligible benefit from using the __init qualifier. Remove it to fix the warning, consistent with the other ADB drivers. Tested-by:
-
- 30 Jul, 2018 6 commits
-
-
Alexey Spirkov authored
mmu_init_secondary() calls ppc44x_pin_tlb() which is marked __init, leading to a warning: The function mmu_init_secondary() references the function __init ppc44x_pin_tlb(). There's no CPU hotplug support on 44x so mmu_init_secondary() will only be called at boot. Therefore we should mark it as __init. Signed-off-by:
Alexey Spirkov <alexeis@astrosoft.ru> [mpe: Flesh out change log details] Signed-off-by:
-
Michael Ellerman authored
Paul Menzel reported that kmemleak was producing reports such as: unreferenced object 0xc0000000f8b80000 (size 16384): comm "init", pid 1, jiffies 4294937416 (age 312.240s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d997deb7>] __pud_alloc+0x80/0x190 [<0000000087f2e8a3>] move_page_tables+0xbac/0xdc0 [<00000000091e51c2>] shift_arg_pages+0xc0/0x210 [<00000000ab88670c>] setup_arg_pages+0x22c/0x2a0 [<0000000060871529>] load_elf_binary+0x41c/0x1648 [<00000000ecd9d2d4>] search_binary_handler.part.11+0xbc/0x280 [<0000000034e0cdd7>] __do_execve_file.isra.13+0x73c/0x940 [<000000005f953a6e>] sys_execve+0x58/0x70 [<000000009700a858>] system_call+0x5c/0x70 Indicating that a PUD was being leaked. However what's really happening is that kmemleak is not able to recognise the references from the PGD to the PUD, because they are not fully qualified pointers. We can confirm that in xmon, eg: Find the task struct for pid 1 "init": 0:mon> P task_struct ->thread.ksp PID PPID S P CMD c0000001fe7c0000 c0000001fe803960 1 0 S 13 systemd Dump virtual address 0 to find the PGD: 0:mon> dv 0 c0000001fe7c0000 pgd @ 0xc0000000f8b01000 Dump the memory of the PGD: 0:mon> d c0000000f8b01000 c0000000f8b01000 00000000f8b90000 0000000000000000 |................| c0000000f8b01010 0000000000000000 0000000000000000 |................| c0000000f8b01020 0000000000000000 0000000000000000 |................| c0000000f8b01030 0000000000000000 00000000f8b80000 |................| ^^^^^^^^^^^^^^^^ There we can see the reference to our supposedly leaked PUD. But because it's missing the leading 0xc, kmemleak won't recognise it. We can confirm it's still in use by translating an address that is mapped via it: 0:mon> dv 7fff94000000 c0000001fe7c0000 pgd @ 0xc0000000f8b01000 pgdp @ 0xc0000000f8b01038 = 0x00000000f8b80000 <-- pudp @ 0xc0000000f8b81ff8 = 0x00000000037c4000 pmdp @ 0xc0000000037c5ca0 = 0x00000000fbd89000 ptep @ 0xc0000000fbd89000 = 0xc0800001d5ce0386 Maps physical address = 0x00000001d5ce0000 Flags = Accessed Dirty Read Write The fix is fairly simple. We need to tell kmemleak to ignore PUD allocations and never report them as leaks. We can also tell it not to scan the PGD, because it will never find pointers in there. However it will still notice if we allocate a PGD and then leak it. Reported-by:Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Christophe Leroy authored
Split asm/tlbflush.h into: asm/nohash/tlbflush.h asm/book3s/32/tlbflush.h asm/book3s/64/tlbflush.h (already existing) Signed-off-by:
-
Christophe Leroy authored
asm/tlbflush.h is only needed for: - using functions xxx_flush_tlb_xxx() - using MMU_NO_CONTEXT - including asm-generic/pgtable.h Signed-off-by:
-
Christophe Leroy authored
mmu-44x.h doesn't need asm/page.h if PAGE_SHIFT are replaced by CONFIG_PPC_XX_PAGES Signed-off-by:
-
Christophe Leroy authored
Signed-off-by:
-
