- 23 Sep, 2009 40 commits
-
-
Chuck Lever authored
Allocating nfs_parsed_mount_data and setting up the defaults is nearly the same for both nfs and nfs4 mounts. Both paths seem to use nfs_validate_transport_protocol(), so setting a default value for nfs_server.protocol ought to be unnecessary. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Neil Brown authored
[[resending with correct cc: - "vfs.kernel.org" just isn't right!]] xprt->reestablish_timeout is used to cause TCP connection attempts to back off if the connection fails so as not to hammer the network, but to still allow immediate connections when there is no reason to believe there is a problem. It is not used for the first connection (when transport->sock is NULL) but only on reconnects. It is currently set: a/ to 0 when xs_tcp_state_change finds a state of TCP_FIN_WAIT1 on the assumption that the client has closed the connection so the reconnect should be immediate when needed. b/ to at least XS_TCP_INIT_REEST_TO when xs_tcp_state_change detects TCP_CLOSING or TCP_CLOSE_WAIT on the assumption that the server closed the connection so a small delay at least is required. c/ as above when xs_tcp_state_change detects TCP_SYN_SENT, so that it is never 0 while a connection has been attempted, else the doubling will produce 0 and there will be no backoff. d/ to double is value (up to a limit) when delaying a connection, thus providing exponential backoff and e/ to XS_TCP_INIT_REEST_TO in xs_setup_tcp as simple initialisation. So you can see it is highly dependant on xs_tcp_state_change being called as expected. However experimental evidence shows that xs_tcp_state_change does not see all state changes. ("rpcdebug -m rpc trans" can help show what actually happens). Results show: TCP_ESTABLISHED is reported when a connection is made. TCP_SYN_SENT is never reported, so rule 'c' above is never effective. When the server closes the connection, TCP_CLOSE_WAIT and TCP_LAST_ACK *might* be reported, and TCP_CLOSE is always reported. This rule 'b' above will sometimes be effective, but not reliably. When the client closes the connection, it used to result in TCP_FIN_WAIT1, TCP_FIN_WAIT2, TCP_CLOSE. However since commit f75e6745 (SUNRPC: Fix the problem of EADDRNOTAVAIL syslog floods on reconnect) we don't see *any* events on client-close. I think this is because xs_restore_old_callbacks is called to disconnect xs_tcp_state_change before the socket is closed. In any case, rule 'a' no longer applies. So all that is left are rule d, which successfully doubles the timeout which is never rest, and rule e which initialises the timeout. Even if the rules worked as expected, there would be a problem because a successful connection does not reset the timeout, so a sequence of events where the server closes the connection (e.g. during failover testing) will cause longer and longer timeouts with no good reason. This patch: - sets reestablish_timeout to 0 in xs_close thus effecting rule 'a' - sets it to 0 in xs_tcp_data_ready to ensure that a successful connection resets the timeout - sets it to at least XS_TCP_INIT_REEST_TO after it is doubled, thus effecting rule c I have not reimplemented rule b and the new version of rule c seems sufficient. I suspect other code in xs_tcp_data_ready needs to be revised as well. For example I don't think connect_cookie is being incremented as often as it should be. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Keep it in the case of the legacy binary mount interface, but purge it from the nfs_server structure. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
David Howells authored
Commit ebd2c8f6 removed struct uart_info and commit bdc04e31 further moved delta_msr_wait. Fix up the MN10300 on-chip serial port drivers to comply with this. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
Use asm/generic-hardirq.h to build asm/hardirq.h and also remove the unused idle_timestamp field in irq_cpustat whilst we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'x86/ptrace-syscall-exit' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/ptrace-syscall-exit' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: ptrace: sysret path should reach syscall_trace_leave
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: power_supply: Add driver for the PMU on WM831x PMICs ds2760_battery: Fix integer overflow for time_to_empty_now wm97xx_battery: Convert to dev_pm_ops wm97xx_battery: Use irq to detect charger state wm97xx_battery: Use platform_data wm97xx-core: Pass platform_data to battery ds2760_battery: implement set_charged() feature power_supply: get_by_name and set_charged functionality power_supply: EXPORT_SYMBOL cleanups ds2760_battery: add current_accum module parameter ds2760_battery: handle full_active_uAh == 0 case correctly ds2760_battery: add rated_capacity module parameter ds2760_battery: export more features ds2760_battery: delay power supply registration wm8350_power: Implement charge type property power_supply: Add a charge_type property, and use it for olpc driver olpc_battery: Add an 'error' sysfs device that displays raw errors Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/r600: set correct pitch for 4 byte copy drm/radeon: consolidate family flags used in pciids.
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: (58 commits) mtd: jedec_probe: add PSD4256G6V id mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board) mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board) m25p80: Add Spansion S25FL129P serial flashes jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs mtd: sh_flctl: register sh_flctl using platform_driver_probe() mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible mtd: nand: fix tmio_nand ecc correction mtd: nand: add __nand_correct_data helper function mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G mtd: inftl: fix fold chain block number mtd: jedec: fix compilation problem with I28F640C3B definition mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver mtd: ofpart: Check availability of reg property instead of name property driver/Makefile: Initialize "mtd" and "spi" before "net" mtd: omap: adding DMA mode support in nand prefetch/post-write mtd: omap: add support for nand prefetch-read and post-write mtd: add nand support for w90p910 (v2) mtd: maps: add mtd-ram support to physmap_of mtd: pxa3xx_nand: add single-bit error corrections reporting ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'vgaarb-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: vgaarb: make client interface config invariant.
-
git://git.infradead.org/iommu-2.6Linus Torvalds authored
* git://git.infradead.org/iommu-2.6: (23 commits) intel-iommu: Disable PMRs after we enable translation, not before intel-iommu: Kill DMAR_BROKEN_GFX_WA option. intel-iommu: Fix integer wrap on 32 bit kernels intel-iommu: Fix integer overflow in dma_pte_{clear_range,free_pagetable}() intel-iommu: Limit DOMAIN_MAX_PFN to fit in an 'unsigned long' intel-iommu: Fix kernel hang if interrupt remapping disabled in BIOS intel-iommu: Disallow interrupt remapping if not all ioapics covered intel-iommu: include linux/dmi.h to use dmi_ routines pci/dmar: correct off-by-one error in dmar_fault() intel-iommu: Cope with yet another BIOS screwup causing crashes intel-iommu: iommu init error path bug fixes intel-iommu: Mark functions with __init USB: Work around BIOS bugs by quiescing USB controllers earlier ia64: IOMMU passthrough mode shouldn't trigger swiotlb init intel-iommu: make domain_add_dev_info() call domain_context_mapping() intel-iommu: Unify hardware and software passthrough support intel-iommu: Cope with broken HP DC7900 BIOS iommu=pt is a valid early param intel-iommu: double kfree() intel-iommu: Kill pointless intel_unmap_single() function ... Fixed up trivial include lines conflict in drivers/pci/intel-iommu.c
-
Rusty Russell authored
Impact: cleanup No need for redeclaration. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (41 commits) regulator: Add some brief design documentation regulator: fix voltage range in da9034 ldo12 regulator/driver: be more specific in nanodoc for is_enabled regulator/lp3971: drop unnecessary initialization regulator: drop 'default n' regulator: fix typos regulator: fix calculation of voltage range in da9034_set_ldo12_voltage() regulator: update a filename in documentation drivers/regulator/Kconfig: fix typo (s/Usersapce/Userspace/) in REGULATOR_USERSPACE_CONSUMER description REGULATOR Handle positive returncode from enable regulator: tps650xx - build fixes for x86_64 Fix some regulator documentation Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Regulator: Add TPS6507x regulator driver Regulator: Add TPS65023 regulator driver regulator: userspace: use sysfs_create_group regulator: Add GPIO enable control to fixed voltage regulator driver Regulator: Implement list_voltage for pcf50633 regulator driver. regulator: regulator_enable() permission checking regulator: Push locking for regulator_is_enabled() out ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: lx6464es - remove unused struct member ALSA: lx6464es - cleanup of rmh message bus function ALSA: pcm - Simplify snd_pcm_drain() implementation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: wm8753: fix mapping when MONOMIX is set to Stereo ASoC: some minor changes for AD1836 and AD1938 codec drivers ASoC: DaVinci: Fixes to McASP configuration ASoC: Blackfin I2S: fix resuming when device hasn't been used ASoC: Blackfin I2S: add lost platform_device parameter to resume function ASoC: fix typos in Blackfin headers ASoC: bf5xx-sport: the irq save/restore funcs take an unsigned long ASoC: Blackfin AC97: add a few missing multichannel define handling
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (22 commits) [S390] Update default configuration. [S390] hibernate: Do real CPU swap at resume time [S390] dasd: tolerate devices that have no feature codes [S390] zcrypt: Do not add/remove devices in s/r callbacks [S390] hibernate: make sure pfn_is_nosave handles lowcore pages [S390] smp: introduce LC_ORDER and simplify lowcore handling [S390] ptrace: use common code for simple peek/poke operations [S390] fix disabled_wait inline assembly clobber list [S390] Change kernel_page_present coding style. [S390] hibernation: reset system after resume [S390] hibernation: fix guest page hinting related crash [S390] Get rid of init_module/delete_module compat functions. [S390] Convert sys_execve to function with parameters. [S390] Convert sys_clone to function with parameters. [S390] qdio: change state of all primed input buffers [S390] qdio: reduce per device debug messages [S390] cio: introduce consistent subchannel scanning [S390] cio: idset use actual number of ssids [S390] cio: dont kfree vmalloced memory [S390] cio: introduce css_settle ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: itimers: Add tracepoints for itimer hrtimer: Add tracepoint for hrtimers timers: Add tracepoints for timer_list timers cputime: Optimize jiffies_to_cputime(1) itimers: Simplify arm_timer() code a bit itimers: Fix periodic tics precision itimers: Merge ITIMER_VIRT and ITIMER_PROF Trivial header file include conflicts in kernel/fork.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: remove a workaround for Momobay FX-3A firewire: sbp2: remove a workaround for Momobay FX-3A firewire: sbp2: fix status reception firewire: core: fix topology map response handler firewire: core: fix race with parallel PCI device probe firewire: core: header file cleanup firewire: ohci: fix Self ID Count register mask (safeguard against buffer overflow) ieee1394: raw1394: Do not leak memory on failed trylock.
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6Linus Torvalds authored
* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6: SFI: remove unneeded includes sfi: Remove unused code SFI: Hook PCI MMCONFIG x86: add arch-specific SFI support SFI: add capability to parse ACPI tables SFI: add platform-independent core support SFI: create linux/sfi.h SFI: Simple Firmware Interface - MAINTAINERS, Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits) ACPI: don't pass handle for fixed hardware notifications ACPI: remove null pointer checks in deferred execution path ACPI: simplify deferred execution path acerhdf: additional BIOS versions acerhdf: convert to dev_pm_ops acerhdf: fix fan control for AOA150 model thermal: add missing Kconfig dependency acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file hp-wmi: fix rfkill memory leak on unload ACPI: remove unnecessary #ifdef CONFIG_DMI ACPI: linux/acpi.h should not include linux/dmi.h hwmon driver for ACPI 4.0 power meters topstar-laptop: add new driver for hotkeys support on Topstar N01 thinkpad_acpi: fix rfkill memory leak on unload thinkpad-acpi: report brightness events when required thinkpad-acpi: don't poll by default any of the reserved hotkeys thinkpad-acpi: Fix procfs hotkey reset command thinkpad-acpi: deprecate hotkey_bios_mask thinkpad-acpi: hotkey poll fixes thinkpad-acpi: be more strict when detecting a ThinkPad ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Clearly mark ACPI drivers as such i2c: Add driver for SMBus Control Method Interface i2c-pnx: Correct use of request_region/request_mem_region MAINTAINERS: Add maintainer for AT24 and PCA9564/PCA9665 i2c-piix4: Add AMD SB900 SMBus device ID i2c/chips: Remove deprecated pcf8574 driver i2c/chips: Remove deprecated pca9539 driver i2c/chips: Remove deprecated pcf8575 driver gpio/pcf857x: Copy i2c_device_id from old pcf8574 driver i2c/scx200_acb: Provide more information on bus errors i2c: Provide compatibility links for i2c adapters i2c: Convert i2c adapters to bus devices i2c: Convert i2c clients to a device type i2c/tsl2550: Use combined SMBus transactions i2c-taos-evm: Switch echo off to improve performance i2c: Drop unused i2c_driver.id field
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (85 commits) ocfs2: Use buffer IO if we are appending a file. ocfs2: add spinlock protection when dealing with lockres->purge. dlmglue.c: add missed mlog lines ocfs2: __ocfs2_abort() should not enable panic for local mounts ocfs2: Add ioctl for reflink. ocfs2: Enable refcount tree support. ocfs2: Implement ocfs2_reflink. ocfs2: Add preserve to reflink. ocfs2: Create reflinked file in orphan dir. ocfs2: Use proper parameter for some inode operation. ocfs2: Make transaction extend more efficient. ocfs2: Don't merge in 1st refcount ops of reflink. ocfs2: Modify removing xattr process for refcount. ocfs2: Add reflink support for xattr. ocfs2: Create an xattr indexed block if needed. ocfs2: Call refcount tree remove process properly. ocfs2: Attach xattr clusters to refcount tree. ocfs2: Abstract ocfs2 xattr tree extend rec iteration process. ocfs2: Abstract the creation of xattr block. ocfs2: Remove inode from ocfs2_xattr_bucket_get_name_value. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits) USB: Fix sysfs paths in documentation USB: skeleton: fix coding style issues. USB: O_NONBLOCK in read path of skeleton USB: make usb-skeleton honor O_NONBLOCK in write path USB: skel_read really sucks royally USB: Add hub descriptor update hook for xHCI USB: xhci: Support USB hubs. USB: xhci: Set multi-TT field for LS/FS devices under hubs. USB: xhci: Set route string for all devices. USB: xhci: Fix command wait list handling. USB: xhci: Change how xHCI commands are handled. USB: xhci: Refactor input device context setup. USB: xhci: Endpoint representation refactoring. USB: gadget: ether needs to select CRC32 USB: fix USBTMC get_capabilities success handling USB: fix missing error check in probing USB: usbfs: add USBDEVFS_URB_BULK_CONTINUATION flag USB: support for autosuspend in sierra while online USB: ehci-dbgp,ehci: Allow dbpg to work with suspend/resume USB: ehci-dbgp,documentation: Documentation updates for ehci-dbgp ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: don't force VIRTIO_F_NOTIFY_ON_EMPTY lguest: cleanup for map_switcher() lguest: use PGDIR_SHIFT for PAE code to allow different PAGE_OFFSET lguest: use set_pte/set_pmd uniformly for real page table entries lguest: move panic notifier registration to its expected place. virtio_blk: add support for cache flush virtio: add virtio IDs file virtio: get rid of redundant VIRTIO_ID_9P definition virtio: make add_buf return capacity remaining virtio_pci: minor MSI-X cleanups
-
Hugh Dickins authored
My 58fa879e "mm: FOLL flags for GUP flags" broke CONFIG_NOMMU build by forgetting to update nommu.c foll_flags type: mm/nommu.c:171: error: conflicting types for `__get_user_pages' mm/internal.h:254: error: previous declaration of `__get_user_pages' was here make[1]: *** [mm/nommu.o] Error 1 My 03f6462a "mm: move highest_memmap_pfn" broke CONFIG_NOMMU build by forgetting to add a nommu.c highest_memmap_pfn: mm/built-in.o: In function `memmap_init_zone': (.meminit.text+0x326): undefined reference to `highest_memmap_pfn' mm/built-in.o: In function `memmap_init_zone': (.meminit.text+0x32d): undefined reference to `highest_memmap_pfn' Fix both breakages, and give myself 30 lashes (ouch!) Reported-by: Michal Simek <michal.simek@petalogix.com> Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Heiko Carstens authored
For this system call user space passes a signed long length parameter, while the kernel side takes an unsigned long parameter and converts it later to signed long again. This has led to bugs in compat wrappers see e.g. dd90bbd5 "powerpc: Add compat_sys_truncate". The s390 compat wrapper for this functions is broken as well since it also performs zero extension instead of sign extension for the length parameter. In addition if hpa comes up with an automated way of generating compat wrappers it would generate a wrong one here. So change the length parameter from unsigned long to long. Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://gitserver.sunplusct.com/linux-2.6-scoreLinus Torvalds authored
* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score: score: update email address in MAINTAINERS. score: Cleanup linker script using new macros. score: Make THREAD_SIZE available to assembly files. score: Make PAGE_SIZE available to assembly.
-
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-rolandLinus Torvalds authored
* 'x86/orig_ax' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: ptrace: set TS_COMPAT when 32-bit ptrace sets orig_eax>=0 x86: ptrace: do not sign-extend orig_ax on write x86: syscall_get_nr returns int asm-generic: syscall_get_nr returns int
-
H Hartley Sweeten authored
bitfields should be unsigned. This fixes sparse noise: error: dubious one-bit signed bitfield Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Jan Kara <jack@ucw.cz> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Heiko Carstens authored
Unlike on most other architectures ino_t is an unsigned int on s390. So add an explicit cast to avoid this compile warning: fs/ext2/namei.c: In function 'ext2_lookup': fs/ext2/namei.c:73: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Doug Graham authored
There are a few places in the Minix FS code where the "inode" field of a minix_dir_entry is used without checking first to see if the dirent is really a minix3_dir_entry. The inode number in a V1/V2 dirent is 16 bits, whereas that in a V3 dirent is 32 bits. Accessing it as a 16 bit field when it really should be accessed as a 32 bit field probably kinda sorta works on a little-endian machine, but leads to some rather odd behaviour on big-endian machines. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Doug Graham <dgraham@nortel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Aaro Koskinen authored
The patch enables the driver to be used on platforms such as ARM where an I/O address is a 32-bit memory address. The patch avoids the following kernel oops: debian:~# modprobe sisfb [ 73.070000] sisfb: Video ROM found [ 73.080000] sisfb: Video RAM at 0x80000000, mapped to 0xe0a00000, size 1024k [ 73.090000] sisfb: MMIO at 0x84080000, mapped to 0xe0b80000, size 256k [ 73.090000] sisfb: Memory heap starting at 800K, size 32K [ 73.360000] Unable to handle kernel paging request at virtual address 6e000844 [ 73.380000] pgd = df230000 [ 73.380000] [6e000844] *pgd=00000000 [ 73.380000] Internal error: Oops: 8f5 [#1] [ 73.380000] Modules linked in: sisfb(+) fb cfbcopyarea cfbimgblt cfbfillrect [ 73.380000] CPU: 0 Not tainted (2.6.31-iop32x #1) [ 73.380000] PC is at SiS_SetRegANDOR+0x10/0x38 [sisfb] [ 73.380000] LR is at SiS_SetSCLKHigh+0x38/0x94 [sisfb] [ 73.380000] pc : [<bf01dc00>] lr : [<bf0238f8>] psr: 60000013 [ 73.380000] sp : df38fd00 ip : 6e000000 fp : 00000002 [ 73.380000] r10: 00000108 r9 : 00000000 r8 : 00000108 [ 73.380000] r7 : df064258 r6 : 00000110 r5 : 6e000844 r4 : 0000010a [ 73.380000] r3 : 00000001 r2 : 0000000e r1 : 00000011 r0 : 00000844 [ 73.380000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 73.380000] Control: 0000397f Table: bf230000 DAC: 00000015 [ 73.380000] Process modprobe (pid: 1849, stack limit = 0xdf38e270) [ 73.380000] Stack: (0xdf38fd00 to 0xdf390000) [ 73.380000] fd00: 0000010a 00000108 df064258 df064258 df064258 00000000 00000000 bf02c4e0 [ 73.380000] fd20: 00000114 bf02c50c 00000013 00000114 0000010a df064258 00000000 bf02c980 [ 73.380000] fd40: 00009c66 00000004 00000001 df064250 a0010000 a6a2a0a0 df064250 00000003 [ 73.380000] fd60: df064250 00000000 df064258 0000fffd 00000000 00000000 00000000 bf033948 [ 73.380000] fd80: 00000000 00000000 00000000 bf019e2c 00000000 df064a70 bf03b470 00010000 [ 73.380000] fda0: 00000000 df064250 00000000 df831c00 00000012 bf039f70 00000000 c00abed8 [ 73.380000] fdc0: 000008a6 000008a4 df0649b0 df064878 df064258 df064000 00000000 00000000 [ 73.380000] fde0: 00000001 00008000 00000001 00030000 df81c930 bf049f88 df831c00 00000000 [ 73.380000] fe00: bf049f58 df3952a0 c0447708 bf049f88 bf049fe0 c0191980 df831c00 c0191b10 [ 73.380000] fe20: df831c58 bf049f58 df831c00 bf04aca8 df3952a0 df831c58 df831c58 bf049f88 [ 73.380000] fe40: c01ba1b4 c01ba0a0 df831c58 df831c8c bf049f88 c01ba1b4 df3952a0 00000000 [ 73.380000] fe60: c03e265c c01ba240 00000000 df38fe78 bf049f88 c01b990c df812938 df81b8d0 [ 73.380000] fe80: df3952a0 df807780 00000000 00000060 bf049f88 c01b9224 bf0429c8 00000000 [ 73.380000] fea0: bf049f58 00000000 bf049f88 00000000 00000000 bf04aea8 00000000 c01ba4e4 [ 73.380000] fec0: e09861a0 bf049f58 00000000 bf049f88 00000000 c0191f20 00000000 00000000 [ 73.380000] fee0: c03f7bac bf04d418 0000fff2 0000fff1 bf04ad08 0002f260 0002f260 e0986038 [ 73.380000] ff00: e0986150 e098568b df143340 e0990280 00000036 c03d8b00 fffffffd 00000000 [ 73.380000] ff20: bf04acfc 00000000 fffffffc 0003cf4b 00018098 c03f7bac 00000000 bf04d000 [ 73.380000] ff40: df38e000 00000000 bedc0984 c00272a4 ffffffff c005bc88 00000000 00000000 [ 73.380000] ff60: 0003cf4b 0003cf4b 00018098 bf04acfc 00000000 c0027fe8 df38e000 00000000 [ 73.380000] ff80: bedc0984 c006882c 00001000 00000003 00000000 00009064 00000000 00008edc [ 73.380000] ffa0: 00000080 c0027e20 00009064 00000000 4014e000 0003cf4b 00018098 0003cf4b [ 73.380000] ffc0: 00009064 00000000 00008edc 00000080 00000000 00000000 40025000 bedc0984 [ 73.380000] ffe0: 00000000 bedc08fc 0000b6b0 400e8f34 60000010 4014e000 00000000 00000000 [ 73.380000] [<bf01dc00>] (SiS_SetRegANDOR+0x10/0x38 [sisfb]) from [<df064258>] (0xdf064258) [ 73.380000] Code: e92d0030 e20110ff e280546e e3a0c46e (e5c51000) [ 73.680000] ---[ end trace 62a93e01df37a5f2 ]--- Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Korsgaard authored
Fixes `s3c_fb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o With CONFIG_HOTPLUG=n, functions marked with __devexit gets removed, so make sure we use __devexit_p when referencing pointers to them. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
drivers/video/tmiofb.c: In function 'tmiofb_resume': drivers/video/tmiofb.c:977: warning: 'retval' may be used uninitialized in this function Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Francisco Jerez authored
fbcon makes the (reasonable) assumption that it only needs to program the hardware once, when fbcon_init() is called for the foreground console. This doesn't always play well with vgacon because vgacon_deinit() is only doing its job when the last console it owns is closed (when switching from vgacon to fbcon, that's usually *after* fbcon_init() has set the new mode). Depending on the hardware this can cause the wrong framebuffer location to be scanned out (e.g. reproduced on nv05 with the nouveau framebuffer driver). Signed-off-by: Francisco Jerez <currojerez@riseup.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ian Armstrong authored
Attempting to unload a framebuffer module calls unregister_framebuffer() which in turn gets fbcon to release it. If fbcon has no framebuffers linked to a console, it will also unbind itself from the console driver. However, if fbcon never registered itself as a console driver, the unbind will fail causing the framebuffer device entry to persist. In most cases this failure will result in an oops when attempting to access the now non-existent device. This patch ensures that the fbcon unbind request will succeed even if a bind was never done. It tracks if a successful bind ever occurred & will only attempt to unbind if needed. If there never was a bind, it simply returns with no error. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
CONFIG_FB_MATROX_32MB is always enabled, so there is no point in having ifdefs all around. And it is bad practice to use CONFIG_* as a name for something which is not a Kconfig option. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
With multihead support always enabled, macros MINFO_FROM and MINFO_FROM_INFO are no longer needed and make the code harder to read. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
With multihead support always enabled, these macros are no longer needed and make the code harder to read. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
With multihead support always enabled, these macros are no longer needed and make the code harder to read. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-