- 05 Oct, 2020 40 commits
-
-
Alvin Lee authored
[Why] DAL resume from BACO time is longer if we always flush inst_fb [How] Check if backdoor loading to flush inst_fb Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
[Why] When forcing 3D mode in DAL, we set the right address to be the same as the left address. We need to do the same for the meta addresses. [How] Program right meta to be same as left meta. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Sung Lee authored
[WHY] Currently construction of clock limits gets skipped for diags. This logic would be useful to get tested in diags. [HOW] Copy existing states to clk_table such that update_bw_bounding_box logic gets used to fill the table. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
[Why] On narrow range monitors without LFC, a margin prevents good utilization of the available range. [How] Decrease the margin for exiting fixed mode and fix the frame counter to reset if a non-consecutive render is found. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
This should be programmed with timing rather than with odm. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Charlene Liu authored
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] Slow down the HW i2c speed when used by HW i2c. This request: each acquired_i2c_engine setup the i2c speed needed and sets the I2c engine for HDCP use at release_engine. This covers SW using HW i2c engine and HDCP using HW i2c engine. for dmcu using HW i2c engine, needs add similar logic in dmcu fw. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yongqiang Sun authored
[Why] enable ODM on eDP panel with ABM will result in color difference on the panel due to only one ABM module to set one pipe. [How] Block ABM in case of ODM enabled on eDP. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Joshua Aberback authored
[Why] When we transfer the WM range table to SMU, they can perform a watermark switch right away. This can be a problem if we're in not in accelerated mode during hw_init as SMU may initiate a dummy p-state change before the rest of the watermarks are programmed. Watermark set A is defined to be sufficient for all cases, so we can copy the values from set A to all other sets, avoiding any issues from SMU doing WM switches. [How] - new hubbub func init_watermarks - copy register values from set A to all other sets - call init_watermarks before calling notify_wm_ranges Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Joshua Aberback authored
[Why] During driver unload, it is expected that p-state switching is supported. If it's not supported, PMFW will hang due to a forced p-state switch. Even if the current timing does not support p-state normally, we still want to force allow because the worst that can happen is underflow. This will match Navi10 behaviour. [How] - new hubbub func to control the force pstate register - force allow when releasing display ownership - registers are inaccessible after due to m_cgs.hwNotAvailable - explicitly disable force signal during hw_init - if driver is disabled and re-enabled, register not cleared otherwise Also, remove DCN3 part of dcn10_init_hw, we will not be going back to it. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Felipe authored
[WHY] This change was implemented because the comment style was not uniform across the file. In some lines comments were initiated with // and in others they were in between /* ... */. Additionally, the style for multi-line comments was also not uniform and some comment lines were missing the space between the opening /* and the first word of the comment. [HOW] All comments are now in between /*.../*, multi line comments also use /*...*/ and for every comment there is now a space between the opening /* and the first word of the comment. Signed-off-by: Felipe <Felipe.Clark@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
[Why] When running games or benchmarking with v-sync disabled, disabling a plane (which is v-sync) can cause underflow. This is caused by flips pending before pipe locking being applied after locks are released and pipes could have been re-arranged or disconnected. This could potentially apply a flip on incorrect pipe. Also, previous logic of always locking pipes was unnecessary. [How] Only lock the pipes when there is a pipe being disabled to increase efficiency. Before the pipes are locked, check that any pending flips are cleared to ensure the flips are applied to the correct pipe. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
[Why] We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1 [How] Block switch in ACTIVE if not supported in BLANK Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
Add Van Gogh PCI id support. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Roman Li authored
Update dm for vangogh support. Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Roman Li authored
Update dc for vangogh support. v2: fix compilation without DCN 301 set. Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to enable the gfx cg and pg for vangogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch adds power gating handler for gfx10. v2: simplify function Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Print the name of the client rather than the number. This makes it easier to debug what block is causing the fault. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Fallback to legacy path for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
GFXOFF will be enabled once it's verified on real asic. v2: move check into gfx10 module. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to enable psp support for vangogh Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
APU needs load toc firmware for gfx10 series on psp front door loading. v2: rebase against latest code v3: clarify error message Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to add TOC firmware definition on uapi. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to add ip block for vangogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to add vangogh ppt funcions into swSMU block. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to partially enable swSMU for vangogh for the moment. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiaojian Du authored
This patch is to add smu initialize functions for vangogh. v2: squash in updates v3: drop duplicate table entries v4: rebase fixes Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiaojian Du authored
This patch is to add vangogh asic name in smu v11. v2: drop smu firmware name (N/A for VG) Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiaojian Du authored
This patch is to add smu v11.5 smc header for vangogh. Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiaojian Du authored
This patch is to add smu v11.5 firmware header for vangogh v2: squash in updates Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiaojian Du authored
This patch is to add smu v11.5 driver interface header for vangogh. Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiaojian Du authored
This patch is to add new smu messages and feature masks for vangogh. v2: squash in updates and typo fixes Signed-off-by: Xiaojian Du <xiaojian.du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
VanGogh uses nbio v7.2, and a couple of offsets are changed since nbio v2.3 for navi series, so add new nbio v7.2 block. v2: squash in fix for sdma and vcn instances Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to add pcie port indirect read/write callback for nv series. They will be used for new asic. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Thong Thai authored
Same as other VCN 3.0 asics. Signed-off-by: Thong Thai <thong.thai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
There are too many register offset mismatch between mmhub v2.0 and v2.3. E.X: mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3) mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3) mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32: 0x072b(v2.0) 0x0940(v2.3) mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32: 0x072c(v2.0) 0x0941(v2.3) mmMMVM_INVALIDATE_ENG0_REQ: 0x06e3(v2.0) 0x0a01(v2.3) mmMMVM_INVALIDATE_ENG0_ACK: 0x06f5(v2.0) 0x0a02(v2.3) mmMMVM_CONTEXT0_CNTL: 0x06c0(v2.0) 0x0740(v2.3) mmMMVM_L2_PROTECTION_FAULT_STATUS: 0x068c(v2.0) 0x070c(v2.3) mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3) mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3) mmDAGB0_CNTL_MISC2: 0x0071(v2.0) 0x0096(v2.3) ... Continuing using the same file mmhub v2.0 is not good choice, it will introduce a lot of checking with ASIC types. And also easy to introduce the issues that offset not align, this kind of issues are really hard to find. Van Gogh's mmhub vm invalidation is actually caused by the offset mismatch as well. So it would like to create a new file rather than stick to re-use orignal mmhub v2.0 here. v2: add missed translate_further programming. v3: sync with latest code v4: add missing callbacks Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch is to add GFX10 based APU Van Gogh KFD support. We will treat Van Gogh as "dgpu" (bypass IOMMU v2). Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
Enable ip blocks for van gogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch adds the sdma v5.2 support for van gogh. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-