- 26 Sep, 2020 26 commits
-
-
Nick Desaulniers authored
commit fcf1b6a3 upstream. added to kbuild documentation. Provides more official info on building kernels with Clang and LLVM than our wiki. Suggested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> [nd: hunk against Documentation/kbuild/index.rst dropped due to not backporting commit cd238eff ("docs: kbuild: convert docs to ReST and rename to *.rst")] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vasily Gorbik authored
commit 7bac9870 upstream. Define and export OBJSIZE variable for "size" tool from binutils to be used in architecture specific Makefiles (naming the variable just "SIZE" would be too risky). In particular this tool is useful to perform checks that early boot code is not using bss section (which might have not been zeroed yet or intersects with initrd or other files boot loader might have put right after the linux kernel). Link: http://lkml.kernel.org/r/patch-1.thread-2257a1.git-188f5a3d81d5.your-ad-here.call-01565088755-ext-5120@work.hoursAcked-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> [nd: conflict in exported vars list from not backporting commit e83b9f55 ("kbuild: add ability to generate BTF type info for vmlinux")] Signed-off-by:
-
Nick Desaulniers authored
commit 8708e13c upstream. Add keyword support so that our mailing list gets cc'ed for clang/llvm patches. We're pretty active on our mailing list so far as code review. There are numerous Googlers like myself that are paid to support building the Linux kernel with Clang and LLVM. Link: http://lkml.kernel.org/r/20190620001907.255803-1-ndesaulniers@google.comSigned-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Ahern authored
[ Upstream commit 2fbc6e89 ] Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c771 ("ipv4: Add FIB nexthop exceptions") Reported-by:
Kfir Itzhak <mastertheknife@gmail.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4a009cb0 ] skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3ca1a42a ] If skb_put_padto() returns an error, skb has been freed. Better not touch it anymore, as reported by syzbot [1] Note to qrtr maintainers : this suggests qrtr_sendmsg() should adjust sock_alloc_send_skb() second parameter to account for the potential added alignment to avoid reallocation. [1] BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline] BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline] BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline] BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316 CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 __skb_insert include/linux/skbuff.h:1907 [inline] __skb_queue_before include/linux/skbuff.h:2016 [inline] __skb_queue_tail include/linux/skbuff.h:2049 [inline] skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23 qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9 RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003 RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c Allocated by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461 slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518 slab_alloc mm/slab.c:3312 [inline] kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482 skb_clone+0x1b2/0x370 net/core/skbuff.c:1449 qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free+0x82/0xf0 mm/slab.c:3693 __skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823 __skb_put_padto include/linux/skbuff.h:3233 [inline] skb_put_padto include/linux/skbuff.h:3252 [inline] qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88804d8ab3c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 0 bytes inside of 224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0) The buggy address belongs to the page: page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800 raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Fixes: ce57785b ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Carl Huang <cjhuang@codeaurora.org> Cc: Wen Gong <wgong@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit c2b727df ] If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8 ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Michael Chan authored
[ Upstream commit a5390690 ] All changes related to bp->link_info require the protection of the link_lock mutex. It's not sufficient to rely just on RTNL. Fixes: 163e9ef6 ("bnxt_en: Fix race when modifying pause settings.") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Edwin Peer authored
[ Upstream commit d69753fa ] Returning "unknown" as a temperature value violates the hwmon interface rules. Appropriate error codes should be returned via device_attribute show instead. These will ultimately be propagated to the user via the file system interface. In addition to the corrected error handling, it is an even better idea to not present the sensor in sysfs at all if it is known that the read will definitely fail. Given that temp1_input is currently the only sensor reported, ensure no hwmon registration if TEMP_MONITOR_QUERY is not supported or if it will fail due to access permissions. Something smarter may be needed if and when other sensors are added. Fixes: 12cce90b ("bnxt_en: fix HWRM error when querying VF temperature") Signed-off-by:
-
Xin Long authored
[ Upstream commit ff48b622 ] In tipc_buf_append() it may change skb's frag_list, and it causes problems when this skb is cloned. skb_unclone() doesn't really make this skb's flag_list available to change. Shuang Li has reported an use-after-free issue because of this when creating quite a few macvlan dev over the same dev, where the broadcast packets will be cloned and go up to the stack: [ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0 [ ] Call Trace: [ ] dump_stack+0x7c/0xb0 [ ] print_address_description.constprop.7+0x1a/0x220 [ ] kasan_report.cold.10+0x37/0x7c [ ] check_memory_region+0x183/0x1e0 [ ] pskb_expand_head+0x86d/0xea0 [ ] process_backlog+0x1df/0x660 [ ] net_rx_action+0x3b4/0xc90 [ ] [ ] Allocated by task 1786: [ ] kmem_cache_alloc+0xbf/0x220 [ ] skb_clone+0x10a/0x300 [ ] macvlan_broadcast+0x2f6/0x590 [macvlan] [ ] macvlan_process_broadcast+0x37c/0x516 [macvlan] [ ] process_one_work+0x66a/0x1060 [ ] worker_thread+0x87/0xb10 [ ] [ ] Freed by task 3253: [ ] kmem_cache_free+0x82/0x2a0 [ ] skb_release_data+0x2c3/0x6e0 [ ] kfree_skb+0x78/0x1d0 [ ] tipc_recvmsg+0x3be/0xa40 [tipc] So fix it by using skb_unshare() instead, which would create a new skb for the cloned frag and it'll be safe to change its frag_list. The similar things were also done in sctp_make_reassembled_event(), which is using skb_copy(). Reported-by:
Shuang Li <shuali@redhat.com> Fixes: 37e22164 ("tipc: rename and move message reassembly function") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit a4b5cc9e ] I confirmed that the problem fixed by commit 2a63866c ("tipc: fix shutdown() of connectionless socket") also applies to stream socket. ---------- #include <sys/socket.h> #include <unistd.h> #include <sys/wait.h> int main(int argc, char *argv[]) { int fds[2] = { -1, -1 }; socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds); if (fork() == 0) _exit(read(fds[0], NULL, 1)); shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */ wait(NULL); /* To be woken up by _exit(). */ return 0; } ---------- Since shutdown(SHUT_RDWR) should affect all processes sharing that socket, unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right behavior. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Peilin Ye authored
[ Upstream commit bb3a420d ] tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an existing node, causing tipc_group_create_member() to leak memory. Let tipc_group_add_to_tree() return an error in such a case, so that tipc_group_create_member() can handle it properly. Fixes: 75da2163 ("tipc: introduce communication groups") Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com Cc: Hillf Danton <hdanton@sina.com> Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13affSigned-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 5f6857e8 ] struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d087093 ("nfp: implement ethtool FEC mode settings") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Yunsheng Lin authored
[ Upstream commit 2fb541c8 ] Currently there is concurrent reset and enqueue operation for the same lockless qdisc when there is no lock to synchronize the q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in qdisc_deactivate() called by dev_deactivate_queue(), which may cause out-of-bounds access for priv->ring[] in hns3 driver if user has requested a smaller queue num when __dev_xmit_skb() still enqueue a skb with a larger queue_mapping after the corresponding qdisc is reset, and call hns3_nic_net_xmit() with that skb later. Reused the existing synchronize_net() in dev_deactivate_many() to make sure skb with larger queue_mapping enqueued to old qdisc(which is saved in dev_queue->qdisc_sleeping) will always be reset when dev_reset_queue() is called. Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Necip Fazil Yildiran authored
[ Upstream commit db7cd91a ] When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for CRYPTO_HMAC Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA1 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA256 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs are subordinate to CRYPTO. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Signed-off-by:
Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 4ddcaf1e ] When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Petr Machata authored
[ Upstream commit 297e77e5 ] The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where each value is a number of a buffer to direct that priority's traffic to. That value is however never validated to lie within the bounds set by DCBX_MAX_BUFFERS. The only driver that currently implements the callback is mlx5 (maintainers CCd), and that does not do any validation either, in particual allowing incorrect configuration if the prio2buffer value does not fit into 4 bits. Instead of offloading the need to validate the buffer index to drivers, do it right there in core, and bounce the request if the value is too large. CC: Parav Pandit <parav@nvidia.com> CC: Saeed Mahameed <saeedm@nvidia.com> Fixes: e549f6f9 ("net/dcb: Add dcbnl buffer attribute") Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 843d926b ] syzbot reported twice a lockdep issue in fib6_del() [1] which I think is caused by net->ipv6.fib6_null_entry having a NULL fib6_table pointer. fib6_del() already checks for fib6_null_entry special case, we only need to return earlier. Bug seems to occur very rarely, I have thus chosen a 'bug origin' that makes backports not too complex. [1] WARNING: suspicious RCU usage 5.9.0-rc4-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.5/8095: #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline] #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline] #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245 stack backtrace: CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline] fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] dev_close_many+0x30b/0x650 net/core/dev.c:1634 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261 rollback_registered net/core/dev.c:9329 [inline] unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410 unregister_netdevice include/linux/netdevice.h:2774 [inline] ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 421842ed ("net/ipv6: Add fib6_null_entry") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit ba9e04a7 ] Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 66d42ed8 ] There are a couple bugs here: 1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid. 2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption. In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow. Reported-by:
ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com> Fixes: e022c2f0 ("WAN: new synchronous PPP implementation for generic HDLC.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Mark Gray authored
[ Upstream commit 34beb215 ] This patch adds transport ports information for route lookup so that IPsec can select Geneve tunnel traffic to do encryption. This is needed for OVS/OVN IPsec with encrypted Geneve tunnels. This can be tested by configuring a host-host VPN using an IKE daemon and specifying port numbers. For example, for an Openswan-type configuration, the following parameters should be configured on both hosts and IPsec set up as-per normal: $ cat /etc/ipsec.conf conn in ... left=$IP1 right=$IP2 ... leftprotoport=udp/6081 rightprotoport=udp ... conn out ... left=$IP1 right=$IP2 ... leftprotoport=udp rightprotoport=udp/6081 ... The tunnel can then be setup using "ip" on both hosts (but changing the relevant IP addresses): $ ip link add tun type geneve id 1000 remote $IP2 $ ip addr add 192.168.0.1/24 dev tun $ ip link set tun up This can then be tested by pinging from $IP1: $ ping 192.168.0.2 Without this patch the traffic is unencrypted on the wire. Fixes: 2d07dc79 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by:
Qiuyu Xiao <qiuyu.xiao.qyx@gmail.com> Signed-off-by:
Mark Gray <mark.d.gray@redhat.com> Reviewed-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
-
Ganji Aravind authored
[ Upstream commit 94cc242a ] Pass the correct offset to clear the stale filter hit bytes counter. Otherwise, the counter starts incrementing from the stale information, instead of 0. Fixes: 12b276fb ("cxgb4: add support to create hash filters") Signed-off-by:
Ganji Aravind <ganji.aravind@chelsio.com> Signed-off-by:
-
Ralph Campbell authored
[ Upstream commit ec0abae6 ] A migrating transparent huge page has to already be unmapped. Otherwise, the page could be modified while it is being copied to a new page and data could be lost. The function __split_huge_pmd() checks for a PMD migration entry before calling __split_huge_pmd_locked() leading one to think that __split_huge_pmd_locked() can handle splitting a migrating PMD. However, the code always increments the page->_mapcount and adjusts the memory control group accounting assuming the page is mapped. Also, if the PMD entry is a migration PMD entry, the call to is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead of migration_entry_to_pfn(pmd_to_swp_entry(pmd)). Fix these problems by checking for a PMD migration entry. Fixes: 84c3fc4e ("mm: thp: check pmd migration entry in common path") Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
Yang Shi <shy828301@gmail.com> Reviewed-by:
Zi Yan <ziy@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> [4.14+] Link: https://lkml.kernel.org/r/20200903183140.19055-1-rcampbell@nvidia.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Muchun Song authored
[ Upstream commit b0399092 ] If a kprobe is marked as gone, we should not kill it again. Otherwise, we can disarm the kprobe more than once. In that case, the statistics of kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not work. Fixes: e8386a0c ("kprobes: support probing module __exit function") Co-developed-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Song Liu <songliubraving@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.comSigned-off-by:
-
Rustam Kovhaev authored
[ Upstream commit f6588660 ] when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db1043 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Mark Salyzyn authored
commit 37bd2242 upstream. In pfkey_dump() dplen and splen can both be specified to access the xfrm_address_t structure out of bounds in__xfrm_state_filter_match() when it calls addr_match() with the indexes. Return EINVAL if either are out of range. Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-team@android.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
- 23 Sep, 2020 14 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/lkml/20200921162034.660953761@linuxfoundation.org/Signed-off-by:
-
Adam Borowski authored
commit 72a9c673 upstream. A spanking new machine I just got has all but one USB ports wired as 3.0. Booting defconfig resulted in no keyboard or mouse, which was pretty uncool. Let's enable that -- USB3 is ubiquitous rather than an oddity. As 'y' not 'm' -- recovering from initrd problems needs a keyboard. Also add it to the 32-bit defconfig. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/20181009062803.4332-1-kilobyte@angband.plSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Alexey Kardashevskiy authored
commit 437ef802 upstream. There are 2 problems with it: 1. "<" vs expected "<<" 2. the shift number is an IOMMU page number mask, not an address mask as the IOMMU page shift is missing. This did not hit us before f1565c24 ("powerpc: use the generic dma_ops_bypass mode") because we had additional code to handle bypass mask so this chunk (almost?) never executed.However there were reports that aacraid does not work with "iommu=nobypass". After f1565c24, aacraid (and probably others which call dma_get_required_mask() before setting the mask) was unable to enable 64bit DMA and fall back to using IOMMU which was known not to work, one of the problems is double free of an IOMMU page. This fixes DMA for aacraid, both with and without "iommu=nobypass" in the kernel command line. Verified with "stress-ng -d 4". Fixes: 6a5c7be5 ("powerpc: Override dma_get_required_mask by platform hook and ops") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ruSigned-off-by:
-
Quentin Perret authored
commit 29231826 upstream. The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file. Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern: struct foo; int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar); /* This contains struct foo's definition */ #include "foo.h" int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz); Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz. The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming. In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.comSigned-off-by:
-
Arvind Sankar authored
commit 09e43968 upstream. The x86-64 psABI [0] specifies special relocation types (R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker can take advantage of for optimization (relaxation) at link time. This is supported by LLD and binutils versions 2.26 onwards. The compressed kernel is position-independent code, however, when using LLD or binutils versions before 2.27, it must be linked without the -pie option. In this case, the linker may optimize certain instructions into a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo. This potential issue has been present with LLD and binutils-2.26 for a long time, but it has never manifested itself before now: - LLD and binutils-2.26 only relax movq foo@GOTPCREL(%rip), %reg to leaq foo(%rip), %reg which is still position-independent, rather than mov $foo, %reg which is permitted by the psABI when -pie is not enabled. - GCC happens to only generate GOTPCREL relocations on mov instructions. - CLang does generate GOTPCREL relocations on non-mov instructions, but when building the compressed kernel, it uses its integrated assembler (due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as), which has so far defaulted to not generating the GOTPCRELX relocations. Nick Desaulniers reports [1,2]: "A recent change [3] to a default value of configuration variable (ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX relocations. LLD will relax instructions with these relocations based on whether the image is being linked as position independent or not. When not, then LLD will relax these instructions to use absolute addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with Clang and linked with LLD to fail to boot." Patch series [4] is a solution to allow the compressed kernel to be linked with -pie unconditionally, but even if merged is unlikely to be backported. As a simple solution that can be applied to stable as well, prevent the assembler from generating the relaxed relocation types using the -mrelax-relocations=no option. For ease of backporting, do this unconditionally. [0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65 [1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/ [2] https://github.com/ClangBuiltLinux/linux/issues/1121 [3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0 [4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/Reported-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
-
Tobias Diedrich authored
commit 3c5a87be upstream. These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards). Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board. I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested). With this change, the ports are detected: 0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A lspci output: 02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550]) Subsystem: 17aa:5082 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 82 IOMMU group: 11 Region 0: I/O ports at 2200 [size=256] Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Not readable Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [178 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us 02:00.2 0700: 10ec:816b (rev 0e) [...same...] Signed-off-by:
Tobias Diedrich <tobiasdiedrich@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.orgSigned-off-by:
-
Hans de Goede authored
commit c4440b8a upstream. The keyboard drops keypresses early during boot unless both the nomux and reset quirks are set. Add DMI table entries for this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806085Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200907095656.13155-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Vincent Huang authored
commit 6c77545a upstream. Add trackpoint variant IDs to allow supported control on Synaptics trackpoints. Signed-off-by:
Vincent Huang <vincent.huang@tw.synaptics.com> Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com Cc: stable@vger.kernel.org Signed-off-by:
-
Sunghyun Jin authored
commit b3b33d3c upstream. Variable populated, which is a member of struct pcpu_chunk, is used as a unit of size of unsigned long. However, size of populated is miscounted. So, I fix this minor part. Fixes: 8ab16c43 ("percpu: change the number of pages marked in the first_chunk pop bitmap") Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Sunghyun Jin <mcsmonk@gmail.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit c0a7b7fe which is commit 15cbff3f upstream. It causes know regressions and will be reverted in Linus's tree soon. Reported-by:
-
Volker Rümelin authored
commit 66d402e2 upstream. On suspend the original host configuration gets restored. The resume routine has to undo this, otherwise the SMBus master may be left in disabled state or in i2c mode. [JD: Rebased on v5.8, moved the write into i801_setup_hstcfg.] Signed-off-by:
Volker Rümelin <vr_qemu@t-online.de> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Oliver Neukum authored
commit 9cdabcb3 upstream. read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 325b0087 upstream. The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method. We need to specifically check for ENODEV. The issue goes back to the introduction of the driver. Fixes: 115bb1ff ("USB: Add UAS driver") Signed-off-by:
-
Penghao authored
commit bcea6daf upstream. Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default. Signed-off-by:
Penghao <penghao@uniontech.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.comSigned-off-by:
-
