Skip to content

L
linux
Switch branch/tag
  1. 23 Aug, 2017 6 commits
    • Shaohua Li's avatar
      nullb: use ida to manage index · 94bc02e3
      Shaohua Li authored 
      We now dynamically create disks. Managing the disk index with ida to
avoid bump up the index too much.
Signed-off-by: default avatarShaohua Li <shli@fb.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      94bc02e3
    • Shaohua Li's avatar
      nullb: add interface to power on disk · cedcafad
      Shaohua Li authored 
      The device created in nullb configfs interface isn't power on by
default. After user configures the device, user can do 'echo 1 >
xxx/nullb/device_name/power' to power on the device, which will create a
disk. the xxx/nullb/device_name/index is the disk index, so if the index
is 2, the new created disk should be named as /dev/nullb2. Note, the
'index' is only valid after disk is power on.

'echo 0 > xxx/nullb/device_name/power' will remove the disk. Note, this
doesn't remove the device. To remove the device, user should do 'rmdir
xxx/nullb/device_name'. Removing the device will remove the disk too.
Signed-off-by: default avatarShaohua Li <shli@fb.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      cedcafad
    • Shaohua Li's avatar
      nullb: add configfs interface · 3bf2bd20
      Shaohua Li authored 
      Add configfs interface for nullb. configfs interface is more flexible
and easy to configure in a per-disk basis.

Configuration is something like this:
mount -t configfs none /mnt

Checking which features the driver supports:
cat /mnt/nullb/features

The 'features' attribute is for future extension. We probably will add
new features into the driver, userspace can check this attribute to find
the supported features.

Create/remove a device:
mkdir/rmdir /mnt/nullb/a

Then configure the device by setting attributes under /mnt/nullb/a, most
of nullb supported module parameters are converted to attributes:
size; /* device size in MB */
completion_nsec; /* time in ns to complete a request */
submit_queues; /* number of submission queues */
home_node; /* home node for the device */
queue_mode; /* block interface */
blocksize; /* block size */
irqmode; /* IRQ completion handler */
hw_queue_depth; /* queue depth */
use_lightnvm; /* register as a LightNVM device */
blocking; /* blocking blk-mq device */
use_per_node_hctx; /* use per-node allocation for hardware context */

Note, creating a device doesn't create a disk immediately. Creating a
disk is done in two phases: create a device and then power on the
device. Next patch will introduce device power on.

Based on original patch from Kyungchan Koh
Signed-off-by: default avatarKyungchan Koh <kkc6196@fb.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      3bf2bd20
    • Shaohua Li's avatar
      nullb: factor disk parameters · 2984c868
      Shaohua Li authored 
      When we switch to configfs interface, each disk could have different
configuration. To prepare for the change, we move most disk setting to a
separate data structure. The existing module parameter interface is
kept. The 'nr_devices' and 'shared_tags' don't make sense for per-disk
setting, so they are remained as global settings.
Signed-off-by: default avatarShaohua Li <shli@fb.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      2984c868
    • Dan Carpenter's avatar
      skd: error pointer dereference in skd_cons_disk() · 92d499d4
      Dan Carpenter authored 
      My initial impulse was to check for IS_ERR_OR_NULL() but when I looked
at this code a bit more closely, we should only need to check for
IS_ERR().

The blk_mq_alloc_tag_set() returns negative error codes and zero on
success so we can just do an "if (rc) goto err_out;".  It's better to
preserve the error code anyhow.  The blk_mq_init_queue() returns error
pointers on failure, it never returns NULL.  We can also remove the
"q = NULL;" at the start because that's no longer needed.

Fixes: ca33dd92 ("skd: Convert to blk-mq")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      92d499d4
    • Dan Carpenter's avatar
      skd: Uninitialized variable in skd_isr_completion_posted() · c0b3dda7
      Dan Carpenter authored 
      Someone got too agressive about removing initializations and
accidentally removed the "rc = 0;" which is required.

Fixes: c830da8c ("skd: Remove superfluous initializations from skd_isr_completion_posted()")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      c0b3dda7
  3. 18 Aug, 2017 34 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7