- 27 Sep, 2019 40 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various fixes This patchset includes two small fixes for the mlxsw driver and one patch which clarifies recently introduced devlink-trap documentation. Patch #1 clears the port's VLAN filters during port initialization. This ensures that the drop reason reported to the user is consistent. The problem is explained in detail in the commit message. Patch #2 clarifies the description of one of the traps exposed via devlink-trap. Patch #3 from Danielle forbids the installation of a tc filter with multiple mirror actions since this is not supported by the device. The failure is communicated to the user via extack. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
The ASIC can only mirror a packet to one port, but when user is trying to set more than one mirror action, it doesn't fail. Add a check if more than one mirror action was specified per rule and if so, fail for not being supported. Fixes: d0d13c18 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by:
Danielle Ratson <danieller@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Alex noted that the below description might not be obvious to all users. Clarify it by adding an example. Fixes: f3047ca0 ("Documentation: Add devlink-trap documentation") Reported-by:
Alex Kushnarov <alexanderk@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
When a port is created, its VLAN filters are not cleared by the firmware. This causes tagged packets to be later dropped by the ingress STP filters, which default to DISCARD state. The above did not matter much until commit b5ce611f ("mlxsw: spectrum: Add devlink-trap support") where we exposed the drop reason to users. Without this patch, the drop reason users will see is not consistent. If a port is enslaved to a VLAN-aware bridge and a packet with an invalid VLAN tries to ingress the bridge, it will be dropped due to ingress STP filter. If the VLAN is later enabled and then disabled, the packet will be dropped by the ingress VLAN filter despite the above being a seemingly NOP operation. Fix this by clearing all the VLAN filters during port initialization. Adjust the test accordingly. Fixes: b5ce611f ("mlxsw: spectrum: Add devlink-trap support") Reported-by:
-
Colin Ian King authored
There memset is indented incorrectly, remove the extraneous tabs. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The return statement is indented incorrectly, add in a missing tab and remove an extraneous space after the return Signed-off-by:
-
Hans Andersson authored
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause. This patch apply the same workaround as the one for KSZ9031. Fixes: 3aed3e2a ("net: phy: micrel: add Asym Pause workaround") Signed-off-by:
Hans Andersson <hans.andersson@cellavision.se> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Kunihiko Hayashi authored
Until calling register_netdev(), ndev->dev_name isn't specified, and netdev_err() displays "(unnamed net_device)". ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting ave: probe of 65000000.ethernet failed with error -22 This replaces netdev_err() with dev_err() before calling register_netdev(). Signed-off-by:Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Jacob Keller authored
Commit 41560658 ("PTP: introduce new versions of IOCTLs", 2019-09-13) introduced new versions of the PTP ioctls which actually validate that the flags are acceptable values. As part of this, it cleared the flags value using a bitwise and+negation, in an attempt to prevent the old ioctl from accidentally enabling new features. This is incorrect for a couple of reasons. First, it results in accidentally preventing previously working flags on the request ioctl. By clearing the "valid" flags, we now no longer allow setting the enable, rising edge, or falling edge flags. Second, if we add new additional flags in the future, they must not be set by the old ioctl. (Since the flag wasn't checked before, we could potentially break userspace programs which sent garbage flag data. The correct way to resolve this is to check for and clear all but the originally valid flags. Create defines indicating which flags are correctly checked and interpreted by the original ioctls. Use these to clear any bits which will not be correctly interpreted by the original ioctls. In the future, new flags must be added to the VALID_FLAGS macros, but *not* to the V1_VALID_FLAGS macros. In this way, new features may be exposed over the v2 ioctls, but without breaking previous userspace which happened to not clear the flags value properly. The old ioctl will continue to behave the same way, while the new ioctl gains the benefit of using the flags fields. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Fix help text typos for DIMLIB. Fixes: 4f75da36 ("linux/dim: Move implementation to .c files") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Tal Gilboa <talgi@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
-
Marek Vasut authored
The regmap stride is set to 1 for regmap describing 8bit registers already. However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This is not correct, as the switch protocol supports unaligned register reads and writes and the KSZ87xx even uses such unaligned register accesses to read e.g. MIB counter. This patch fixes MIB counter access on KSZ87xx. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Fixes: 46558d60 ("net: dsa: microchip: Initial SPI regmap support") Fixes: 255b59ad ("net: dsa: microchip: Factor out regmap config generation into common header") Reviewed-by:
George McCollister <george.mccollister@gmail.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Add NFT_CHAIN_POLICY_UNSET to replace hardcoded -1 to specify that the chain policy is unset. The chain policy field is actually defined as an 8-bit unsigned integer. 2) Remove always true condition reported by smatch in chain policy check. 3) Fix element lookup on dynamic sets, from Florian Westphal. 4) Use __u8 in ebtables uapi header, from Masahiro Yamada. 5) Bogus EBUSY when removing flowtable after chain flush, from Laura Garcia Liebana. ==================== Signed-off-by: -
Navid Emamdoost authored
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the allocations fail memory is leaked. Appropriate releases are added. Fixes: b9452452 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Navid Emamdoost authored
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of intermediate allocations or initializations fail memory is leaked. requiered releases are added. Fixes: b9452452 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by:
-
Paul Blakey authored
This a new feature, it is preferred that it defaults to N. We will probe the feature support from userspace before actually using it. Fixes: 95a7233c ('net: openvswitch: Set OvS recirc_id from tc chain index') Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
David Ahern authored
A user reported that vrf create fails when IPv6 is disabled at boot using 'ipv6.disable=1': https://bugzilla.kernel.org/show_bug.cgi?id=204903 The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to the check in vrf_fib_rule if ipv6_mod_enabled is disabled. Fixes: e4a38c0c ("ipv6: add vrf table handling code for ipv6 mcast") Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-09-27 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix libbpf's BTF dumper to not skip anonymous enum definitions, from Andrii. 2) Fix BTF verifier issues when handling the BTF of vmlinux, from Alexei. 3) Fix nested calls into bpf_event_output() from TCP sockops BPF programs, from Allan. 4) Fix NULL pointer dereference in AF_XDP's xsk map creation when allocation fails, from Jonathan. 5) Remove unneeded 64 byte alignment requirement of the AF_XDP UMEM headroom, from Bjorn. 6) Remove unused XDP_OPTIONS getsockopt() call which results in an error on older kernels, from Toke. 7) Fix a client/server race in tcp_rtt BPF kselftest case, from Stanislav. 8) Fix indentation issue in BTF's btf_enum_check_kflag_member(), from Colin. ==================== Signed-off-by: -
David S. Miller authored
Vlad Buslov says: ==================== Fix Qdisc destroy issues caused by adding fine-grained locking to filter API TC filter API unlocking introduced several new fine-grained locks. The change caused sleeping-while-atomic BUGs in several Qdiscs that call cls APIs which need to obtain new mutex while holding sch tree spinlock. This series fixes affected Qdiscs by ensuring that cls API that became sleeping is only called outside of sch tree lock critical section. ==================== Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Vlad Buslov authored
Recent changes that removed rtnl dependency from rules update path of tc also made tcf_block_put() function sleeping. This function is called from ops->destroy() of several Qdisc implementations, which in turn is called by qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Steps to reproduce for sfb: tc qdisc add dev ens1f0 handle 1: root sfb tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10 tc qdisc change dev ens1f0 root handle 1: sfb Resulting dmesg: [ 7265.938717] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 7265.940152] in_atomic(): 1, irqs_disabled(): 0, pid: 28579, name: tc [ 7265.941455] INFO: lockdep is turned off. [ 7265.942744] CPU: 11 PID: 28579 Comm: tc Tainted: G W 5.3.0-rc8+ #721 [ 7265.944065] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 7265.945396] Call Trace: [ 7265.946709] dump_stack+0x85/0xc0 [ 7265.947994] ___might_sleep.cold+0xac/0xbc [ 7265.949282] __mutex_lock+0x5b/0x960 [ 7265.950543] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 7265.951803] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 7265.953022] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 7265.954248] tcf_block_put_ext.part.0+0x21/0x50 [ 7265.955478] tcf_block_put+0x50/0x70 [ 7265.956694] sfq_destroy+0x15/0x50 [sch_sfq] [ 7265.957898] qdisc_destroy+0x5f/0x160 [ 7265.959099] sfb_change+0x175/0x330 [sch_sfb] [ 7265.960304] tc_modify_qdisc+0x324/0x840 [ 7265.961503] rtnetlink_rcv_msg+0x170/0x4b0 [ 7265.962692] ? netlink_deliver_tap+0x95/0x400 [ 7265.963876] ? rtnl_dellink+0x2d0/0x2d0 [ 7265.965064] netlink_rcv_skb+0x49/0x110 [ 7265.966251] netlink_unicast+0x171/0x200 [ 7265.967427] netlink_sendmsg+0x224/0x3f0 [ 7265.968595] sock_sendmsg+0x5e/0x60 [ 7265.969753] ___sys_sendmsg+0x2ae/0x330 [ 7265.970916] ? ___sys_recvmsg+0x159/0x1f0 [ 7265.972074] ? do_wp_page+0x9c/0x790 [ 7265.973233] ? __handle_mm_fault+0xcd3/0x19e0 [ 7265.974407] __sys_sendmsg+0x59/0xa0 [ 7265.975591] do_syscall_64+0x5c/0xb0 [ 7265.976753] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 7265.977938] RIP: 0033:0x7f229069f7b8 [ 7265.979117] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5 4 [ 7265.981681] RSP: 002b:00007ffd7ed2d158 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 7265.983001] RAX: ffffffffffffffda RBX: 000000005d813ca1 RCX: 00007f229069f7b8 [ 7265.984336] RDX: 0000000000000000 RSI: 00007ffd7ed2d1c0 RDI: 0000000000000003 [ 7265.985682] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000165c9a0 [ 7265.987021] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001 [ 7265.988309] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000 In sfb_change() function use qdisc_purge_queue() instead of qdisc_tree_flush_backlog() to properly reset old child Qdisc and save pointer to it into local temporary variable. Put reference to Qdisc after sch tree lock is released in order not to call potentially sleeping cls API in atomic section. This is safe to do because Qdisc has already been reset by qdisc_purge_queue() inside sch tree lock critical section. Reported-by: syzbot+ac54455281db908c581e@syzkaller.appspotmail.com Fixes: c266f64d ("net: sched: protect block state with mutex") Suggested-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Recent changes that removed rtnl dependency from rules update path of tc also made tcf_block_put() function sleeping. This function is called from ops->destroy() of several Qdisc implementations, which in turn is called by qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Steps to reproduce for multiq: tc qdisc add dev ens1f0 root handle 1: multiq tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10 ethtool -L ens1f0 combined 2 tc qdisc change dev ens1f0 root handle 1: multiq Resulting dmesg: [ 5539.419344] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 5539.420945] in_atomic(): 1, irqs_disabled(): 0, pid: 27658, name: tc [ 5539.422435] INFO: lockdep is turned off. [ 5539.423904] CPU: 21 PID: 27658 Comm: tc Tainted: G W 5.3.0-rc8+ #721 [ 5539.425400] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 5539.426911] Call Trace: [ 5539.428380] dump_stack+0x85/0xc0 [ 5539.429823] ___might_sleep.cold+0xac/0xbc [ 5539.431262] __mutex_lock+0x5b/0x960 [ 5539.432682] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 5539.434103] ? __nla_validate_parse+0x51/0x840 [ 5539.435493] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 5539.436903] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 5539.438327] tcf_block_put_ext.part.0+0x21/0x50 [ 5539.439752] tcf_block_put+0x50/0x70 [ 5539.441165] sfq_destroy+0x15/0x50 [sch_sfq] [ 5539.442570] qdisc_destroy+0x5f/0x160 [ 5539.444000] multiq_tune+0x14a/0x420 [sch_multiq] [ 5539.445421] tc_modify_qdisc+0x324/0x840 [ 5539.446841] rtnetlink_rcv_msg+0x170/0x4b0 [ 5539.448269] ? netlink_deliver_tap+0x95/0x400 [ 5539.449691] ? rtnl_dellink+0x2d0/0x2d0 [ 5539.451116] netlink_rcv_skb+0x49/0x110 [ 5539.452522] netlink_unicast+0x171/0x200 [ 5539.453914] netlink_sendmsg+0x224/0x3f0 [ 5539.455304] sock_sendmsg+0x5e/0x60 [ 5539.456686] ___sys_sendmsg+0x2ae/0x330 [ 5539.458071] ? ___sys_recvmsg+0x159/0x1f0 [ 5539.459461] ? do_wp_page+0x9c/0x790 [ 5539.460846] ? __handle_mm_fault+0xcd3/0x19e0 [ 5539.462263] __sys_sendmsg+0x59/0xa0 [ 5539.463661] do_syscall_64+0x5c/0xb0 [ 5539.465044] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 5539.466454] RIP: 0033:0x7f1fe08177b8 [ 5539.467863] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5 4 [ 5539.470906] RSP: 002b:00007ffe812de5d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 5539.472483] RAX: ffffffffffffffda RBX: 000000005d8135e3 RCX: 00007f1fe08177b8 [ 5539.474069] RDX: 0000000000000000 RSI: 00007ffe812de640 RDI: 0000000000000003 [ 5539.475655] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000182e9b0 [ 5539.477203] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001 [ 5539.478699] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000 Rearrange locking in multiq_tune() in following ways: - In loop that removes Qdiscs from disabled queues, call qdisc_purge_queue() instead of qdisc_tree_flush_backlog() on Qdisc that is being destroyed. Save the Qdisc in temporary allocated array and call qdisc_put() on each element of the array after sch tree lock is released. This is safe to do because Qdiscs have already been reset by qdisc_purge_queue() inside sch tree lock critical section. - Do the same change for second loop that initializes Qdiscs for newly enabled queues in multiq_tune() function. Since sch tree lock is obtained and released on each iteration of this loop, just call qdisc_put() directly outside of critical section. Don't verify that old Qdisc is not noop_qdisc before releasing reference to it because such check is already performed by qdisc_put*() functions. Fixes: c266f64d ("net: sched: protect block state with mutex") Signed-off-by:
-
Vlad Buslov authored
Recent changes that removed rtnl dependency from rules update path of tc also made tcf_block_put() function sleeping. This function is called from ops->destroy() of several Qdisc implementations, which in turn is called by qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Steps to reproduce for htb: tc qdisc add dev ens1f0 root handle 1: htb default 12 tc class add dev ens1f0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps tc qdisc add dev ens1f0 parent 1:1 handle 40: sfq perturb 10 tc class add dev ens1f0 parent 1:1 classid 1:2 htb rate 100kbps ceil 100kbps Resulting dmesg: [ 4791.148551] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 4791.151354] in_atomic(): 1, irqs_disabled(): 0, pid: 27273, name: tc [ 4791.152805] INFO: lockdep is turned off. [ 4791.153605] CPU: 19 PID: 27273 Comm: tc Tainted: G W 5.3.0-rc8+ #721 [ 4791.154336] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 4791.155075] Call Trace: [ 4791.155803] dump_stack+0x85/0xc0 [ 4791.156529] ___might_sleep.cold+0xac/0xbc [ 4791.157251] __mutex_lock+0x5b/0x960 [ 4791.157966] ? console_unlock+0x363/0x5d0 [ 4791.158676] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 4791.159395] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 4791.160103] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 4791.160815] tcf_block_put_ext.part.0+0x21/0x50 [ 4791.161530] tcf_block_put+0x50/0x70 [ 4791.162233] sfq_destroy+0x15/0x50 [sch_sfq] [ 4791.162936] qdisc_destroy+0x5f/0x160 [ 4791.163642] htb_change_class.cold+0x5df/0x69d [sch_htb] [ 4791.164505] tc_ctl_tclass+0x19d/0x480 [ 4791.165360] rtnetlink_rcv_msg+0x170/0x4b0 [ 4791.166191] ? netlink_deliver_tap+0x95/0x400 [ 4791.166907] ? rtnl_dellink+0x2d0/0x2d0 [ 4791.167625] netlink_rcv_skb+0x49/0x110 [ 4791.168345] netlink_unicast+0x171/0x200 [ 4791.169058] netlink_sendmsg+0x224/0x3f0 [ 4791.169771] sock_sendmsg+0x5e/0x60 [ 4791.170475] ___sys_sendmsg+0x2ae/0x330 [ 4791.171183] ? ___sys_recvmsg+0x159/0x1f0 [ 4791.171894] ? do_wp_page+0x9c/0x790 [ 4791.172595] ? __handle_mm_fault+0xcd3/0x19e0 [ 4791.173309] __sys_sendmsg+0x59/0xa0 [ 4791.174024] do_syscall_64+0x5c/0xb0 [ 4791.174725] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 4791.175435] RIP: 0033:0x7f0aa41497b8 [ 4791.176129] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5 4 [ 4791.177532] RSP: 002b:00007fff4e37d588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 4791.178243] RAX: ffffffffffffffda RBX: 000000005d8132f7 RCX: 00007f0aa41497b8 [ 4791.178947] RDX: 0000000000000000 RSI: 00007fff4e37d5f0 RDI: 0000000000000003 [ 4791.179662] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000000020149a0 [ 4791.180382] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001 [ 4791.181100] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000 In htb_change_class() function save parent->leaf.q to local temporary variable and put reference to it after sch tree lock is released in order not to call potentially sleeping cls API in atomic section. This is safe to do because Qdisc has already been reset by qdisc_purge_queue() inside sch tree lock critical section. Fixes: c266f64d ("net: sched: protect block state with mutex") Signed-off-by:
-
Ka-Cheong Poon authored
In rds_bind(), laddr_check is called without checking if it is NULL or not. And rs_transport should be reset if rds_add_bound() fails. Fixes: c5c1a030 ("net/rds: An rds_sock is added too early to the hash table") Reported-by: syzbot+fae39afd2101a17ec624@syzkaller.appspotmail.com Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: provide correct skb->priority SO_PRIORITY socket option requests TCP egress packets to contain a user provided value. TCP manages to send most packets with the requested values, notably for TCP_ESTABLISHED state, but fails to do so for few packets. These packets are control packets sent on behalf of SYN_RECV or TIME_WAIT states. Note that to test this with packetdrill, it is a bit of a hassle, since packetdrill can not verify priority of egress packets, other than indirect observations, using for example sch_prio on its tunnel device. The bad skb priorities cause problems for GCP, as this field is one of the keys used in routing. ==================== Signed-off-by: -
Eric Dumazet authored
ctl packets sent on behalf of TIME_WAIT sockets currently have a zero skb->priority, which can cause various problems. In this patch we : - add a tw_priority field in struct inet_timewait_sock. - populate it from sk->sk_priority when a TIME_WAIT is created. - For IPv4, change ip_send_unicast_reply() and its two callers to propagate tw_priority correctly. ip_send_unicast_reply() no longer changes sk->sk_priority. - For IPv6, make sure TIME_WAIT sockets pass their tw_priority field to tcp_v6_send_response() and tcp_v6_send_ack(). Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
We can populate skb->priority for some ctl packets instead of always using zero. Signed-off-by:
-
Eric Dumazet authored
Currently, ip6_xmit() sets skb->priority based on sk->sk_priority This is not desirable for TCP since TCP shares the same ctl socket for a given netns. We want to be able to send RST or ACK packets with a non zero skb->priority. This patch has no functional change. Signed-off-by:
-
Allan Zhang authored
BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it can be called from atomic and non-atomic contexts since we don't have bpf_prog_active to prevent it happen. This patch enables 3 levels of nesting to support normal, irq and nmi context. We can easily reproduce the issue by running netperf crr mode with 100 flows and 10 threads from netperf client side. Here is the whole stack dump: [ 515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220 [ 515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G W 4.15.0-smp-fixpanic #44 [ 515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018 [ 515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220 [ 515.228906] RSP: 0018:ffff9a57ffc03938 EFLAGS: 00010246 [ 515.228907] RAX: 0000000000000012 RBX: 0000000000000001 RCX: 0000000000000000 [ 515.228907] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff836b0f80 [ 515.228908] RBP: ffff9a57ffc039c8 R08: 0000000000000004 R09: 0000000000000012 [ 515.228908] R10: ffff9a57ffc1de40 R11: 0000000000000000 R12: 0000000000000002 [ 515.228909] R13: ffff9a57e13bae00 R14: 00000000ffffffff R15: ffff9a57ffc1e2c0 [ 515.228910] FS: 00007f5a3e6ec700(0000) GS:ffff9a57ffc00000(0000) knlGS:0000000000000000 [ 515.228910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 515.228911] CR2: 0000537082664fff CR3: 000000061fed6002 CR4: 00000000000226f0 [ 515.228911] Call Trace: [ 515.228913] <IRQ> [ 515.228919] [<ffffffff82c6c6cb>] bpf_sockopt_event_output+0x3b/0x50 [ 515.228923] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10 [ 515.228927] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100 [ 515.228930] [<ffffffff82cf90a5>] ? tcp_init_transfer+0x125/0x150 [ 515.228933] [<ffffffff82cf9159>] ? tcp_finish_connect+0x89/0x110 [ 515.228936] [<ffffffff82cf98e4>] ? tcp_rcv_state_process+0x704/0x1010 [ 515.228939] [<ffffffff82c6e263>] ? sk_filter_trim_cap+0x53/0x2a0 [ 515.228942] [<ffffffff82d90d1f>] ? tcp_v6_inbound_md5_hash+0x6f/0x1d0 [ 515.228945] [<ffffffff82d92160>] ? tcp_v6_do_rcv+0x1c0/0x460 [ 515.228947] [<ffffffff82d93558>] ? tcp_v6_rcv+0x9f8/0xb30 [ 515.228951] [<ffffffff82d737c0>] ? ip6_route_input+0x190/0x220 [ 515.228955] [<ffffffff82d5f7ad>] ? ip6_protocol_deliver_rcu+0x6d/0x450 [ 515.228958] [<ffffffff82d60246>] ? ip6_rcv_finish+0xb6/0x170 [ 515.228961] [<ffffffff82d5fb90>] ? ip6_protocol_deliver_rcu+0x450/0x450 [ 515.228963] [<ffffffff82d60361>] ? ipv6_rcv+0x61/0xe0 [ 515.228966] [<ffffffff82d60190>] ? ipv6_list_rcv+0x330/0x330 [ 515.228969] [<ffffffff82c4976b>] ? __netif_receive_skb_one_core+0x5b/0xa0 [ 515.228972] [<ffffffff82c497d1>] ? __netif_receive_skb+0x21/0x70 [ 515.228975] [<ffffffff82c4a8d2>] ? process_backlog+0xb2/0x150 [ 515.228978] [<ffffffff82c4aadf>] ? net_rx_action+0x16f/0x410 [ 515.228982] [<ffffffff830000dd>] ? __do_softirq+0xdd/0x305 [ 515.228986] [<ffffffff8252cfdc>] ? irq_exit+0x9c/0xb0 [ 515.228989] [<ffffffff82e02de5>] ? smp_call_function_single_interrupt+0x65/0x120 [ 515.228991] [<ffffffff82e020e1>] ? call_function_single_interrupt+0x81/0x90 [ 515.228992] </IRQ> [ 515.228996] [<ffffffff82a11ff0>] ? io_serial_in+0x20/0x20 [ 515.229000] [<ffffffff8259c040>] ? console_unlock+0x230/0x490 [ 515.229003] [<ffffffff8259cbaa>] ? vprintk_emit+0x26a/0x2a0 [ 515.229006] [<ffffffff8259cbff>] ? vprintk_default+0x1f/0x30 [ 515.229008] [<ffffffff8259d9f5>] ? vprintk_func+0x35/0x70 [ 515.229011] [<ffffffff8259d4bb>] ? printk+0x50/0x66 [ 515.229013] [<ffffffff82637637>] ? bpf_event_output+0xb7/0x220 [ 515.229016] [<ffffffff82c6c6cb>] ? bpf_sockopt_event_output+0x3b/0x50 [ 515.229019] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10 [ 515.229023] [<ffffffff82c29e87>] ? release_sock+0x97/0xb0 [ 515.229026] [<ffffffff82ce9d6a>] ? tcp_recvmsg+0x31a/0xda0 [ 515.229029] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100 [ 515.229032] [<ffffffff82ce77c1>] ? tcp_set_state+0x191/0x1b0 [ 515.229035] [<ffffffff82ced10e>] ? tcp_disconnect+0x2e/0x600 [ 515.229038] [<ffffffff82cecbbb>] ? tcp_close+0x3eb/0x460 [ 515.229040] [<ffffffff82d21082>] ? inet_release+0x42/0x70 [ 515.229043] [<ffffffff82d58809>] ? inet6_release+0x39/0x50 [ 515.229046] [<ffffffff82c1f32d>] ? __sock_release+0x4d/0xd0 [ 515.229049] [<ffffffff82c1f3e5>] ? sock_close+0x15/0x20 [ 515.229052] [<ffffffff8273b517>] ? __fput+0xe7/0x1f0 [ 515.229055] [<ffffffff8273b66e>] ? ____fput+0xe/0x10 [ 515.229058] [<ffffffff82547bf2>] ? task_work_run+0x82/0xb0 [ 515.229061] [<ffffffff824086df>] ? exit_to_usermode_loop+0x7e/0x11f [ 515.229064] [<ffffffff82408171>] ? do_syscall_64+0x111/0x130 [ 515.229067] [<ffffffff82e0007c>] ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: a5a3a828 ("bpf: add perf event notificaton support for sock_ops") Signed-off-by:
Allan Zhang <allanzhang@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Stanislav Fomichev <sdf@google.com> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20190925234312.94063-2-allanzhang@google.com
-
Andrew Lunn authored
The CPU port does not have a PHY connected to it. So calling phy_support_asym_pause() results in an Opps. As with other DSA drivers, add a guard that the port is a user port. Reported-by:
Michal Vokáč <michal.vokac@ysoft.com> Fixes: 0394a63a ("net: dsa: enable and disable all ports") Signed-off-by:
-
Eric Dumazet authored
qdisc_root() use from netem_enqueue() triggers a lockdep warning. __dev_queue_xmit() uses rcu_read_lock_bh() which is not equivalent to rcu_read_lock() + local_bh_disable_bh as far as lockdep is concerned. WARNING: suspicious RCU usage 5.3.0-rc7+ #0 Not tainted ----------------------------- include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syz-executor427/8855: #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline] #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838 stack backtrace: CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357 qdisc_root include/net/sch_generic.h:492 [inline] netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479 __dev_xmit_skb net/core/dev.c:3527 [inline] __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902 neigh_hh_output include/net/neighbour.h:500 [inline] neigh_output include/net/neighbour.h:509 [inline] ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417 dst_output include/net/dst.h:436 [inline] ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
After commit a2c11b03 ("kcm: use BPF_PROG_RUN") syzbot easily triggers the warning in cant_sleep(). As explained in commit 6cab5e90 ("bpf: run bpf programs with preemption disabled") we need to disable preemption before running bpf programs. BUG: assuming atomic context at net/kcm/kcmsock.c:382 in_atomic(): 0, irqs_disabled(): 0, pid: 7, name: kworker/u4:0 3 locks held by kworker/u4:0/7: #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: __write_once_size include/linux/compiler.h:226 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_data kernel/workqueue.c:620 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:647 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: process_one_work+0x88b/0x1740 kernel/workqueue.c:2240 #1: ffff8880a989fdc0 ((work_completion)(&strp->work)){+.+.}, at: process_one_work+0x8c1/0x1740 kernel/workqueue.c:2244 #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: lock_sock include/net/sock.h:1522 [inline] #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: strp_sock_lock+0x2e/0x40 net/strparser/strparser.c:440 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: kstrp strp_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 __cant_sleep kernel/sched/core.c:6826 [inline] __cant_sleep.cold+0xa4/0xbc kernel/sched/core.c:6803 kcm_parse_func_strparser+0x54/0x200 net/kcm/kcmsock.c:382 __strp_recv+0x5dc/0x1b20 net/strparser/strparser.c:221 strp_recv+0xcf/0x10b net/strparser/strparser.c:343 tcp_read_sock+0x285/0xa00 net/ipv4/tcp.c:1639 strp_read_sock+0x14d/0x200 net/strparser/strparser.c:366 do_strp_work net/strparser/strparser.c:414 [inline] strp_work+0xe3/0x130 net/strparser/strparser.c:423 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269 Fixes: a2c11b03 ("kcm: use BPF_PROG_RUN") Fixes: 6cab5e90 ("bpf: run bpf programs with preemption disabled") Signed-off-by:
-
Dan Carpenter authored
The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered. Fixes: b1c17215 ("stmmac: add ipq806x glue layer") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_mode" is an enum and in this context GCC will treat it as an unsigned int so it can never be less than zero. Fixes: 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by:
-
Dan Carpenter authored
The "iface" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: b7862412 ("of_mdio: Abstract a general interface for phy connect") Signed-off-by:
-
Dan Carpenter authored
The "lp->phy_mode" is an enum but in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: ee06b172 ("net: axienet: add support for standard phy-mode binding") Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
-
Dan Carpenter authored
The "dwmac->phy_mode" is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Dan Carpenter authored
The "phy_mode" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 4c270b55 ("net: ethernet: socionext: add AVE ethernet driver") Signed-off-by:
-
Dan Carpenter authored
The "priv->if_mode" is type phy_interface_t which is an enum. In this context GCC will treat the enum as an unsigned int so this error handling is never triggered. Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as unsigned so the error handling will never be triggered. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_mode" variable is an enum and in this context GCC will treat it as unsigned to the error handling will never trigger. Fixes: 57c5bc9a ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by:
-
