- 24 Nov, 2022 1 commit
-
-
Zhang Qilong authored
If devm_gpiod_get_optional() returns error, the charger should be freed before z2_batt_probe returns according to the context. We fix it by just gotoing to 'err' branch. Fixes: a3b4388e ("power: supply: z2_battery: Convert to GPIO descriptors") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com>
-
- 20 Nov, 2022 25 commits
-
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Sebastian Reichel authored
Merge immutable branch adding 'i2c_client_get_device_id()' function, so that drivers can easily be converted to use i2c_driver::probe_new. Signed-off-by:
-
- 17 Nov, 2022 2 commits
-
-
Matti Vaittinen authored
Use devm variants for requesting threaded IRQ and for power-supply registration. Clean up error path and remove the .remove-callback. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by:
-
Zeng Heng authored
If device_add() succeeds, we should call device_del() when want to get rid of it, so move it into proper jump symbol. Otherwise, when __power_supply_register() returns fail and goto wakeup_init_failed to exit, there is still residue device file in sysfs. When attempt to probe device again, sysfs would complain as below: sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061' Call Trace: dump_stack_lvl+0x68/0x85 sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x1b1/0x1d0 kobject_add_internal+0x143/0x390 kobject_add+0x108/0x170 Fixes: 80c6463e ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate") Signed-off-by:
Zeng Heng <zengheng4@huawei.com> Signed-off-by:
-
- 14 Nov, 2022 1 commit
-
-
Angel Iglesias authored
Introduces new helper function to aid in .probe_new() refactors. In order to use existing i2c_get_device_id() on the probe callback, the device match table needs to be accessible in that function, which would require bigger refactors in some drivers using the deprecated .probe callback. This issue was discussed in more detail in the IIO mailing list. Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/Suggested-by:
Nuno Sá <noname.nuno@gmail.com> Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org>
-
- 05 Nov, 2022 4 commits
-
-
Krzysztof Kozlowski authored
BQ2589[0256] seem compatible between each other in major aspects and remaining features are auto-detectable (by reading device revision ID register). Existing DTS already uses the compatibles with a fallback, so adjust the bindings to reflect this and fix dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: charger@6a: compatible: ['ti,bq25895', 'ti,bq25890'] is too long Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
MAX17042 Fuel Gauge uses power-supplies supplies: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: fuel-gauge@36: 'power-supplies' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
The BQ25890 schema references common power-supply.yaml, so allow all its properties to fix warnings like: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: charger@6a: 'monitored-battery', 'power-supplies', ... do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
Define the type of monitored-battery in power-supply.yaml common schema. Reference the schema where applicable to enforce the above in bindings which have monitored-battery property. Signed-off-by:
-
- 01 Nov, 2022 2 commits
-
-
Matti Vaittinen authored
Do minor clean-up by using the newly inroduced LINEAR_RANGE_IDX() initialization macro. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by:
-
Matti Vaittinen authored
Do minor clean-up by using newly inroduced LINEAR_RANGE() initialization macro. Signed-off-by:
-
- 31 Oct, 2022 1 commit
-
-
Lukas Bulwahn authored
The function power_supply_vbat2ri() does not have a parameter called table, despite it being mentioned in the kernel-doc comment. The table is actually obtained from the info parameter, the battery information container. Hence, ./scripts/kernel-doc -none drivers/power/supply/power_supply_core.c warns about this excess function parameter. Adjust the kernel-doc comment for power_supply_vbat2ri() for make W=1 happiness. Fixes: e9e7d165 ("power: supply: Support VBAT-to-Ri lookup tables") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
- 28 Oct, 2022 4 commits
-
-
Marek Vasut authored
The chip is capable of reporting Vsys voltage supplied to the system. Add regulator which represents the Vsys supply. This can be used e.g. as a supply for system PMIC input. Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Marek Vasut authored
The chip is capable of reporting Vbus voltage, add .get_voltage implementation to Vbus regulator to report current Vbus voltage. This requires for the Vbus regulator to be registered always instead of the current state where the regulator is registered only in case USB PHY is not found. Do not provide Vbus regulator enable/disable ops in case USB PHY is present, as they would race with USB PHY notifier which is also used to toggle OTG boost mode. Signed-off-by:
-
Marek Vasut authored
Pull the regulator registration code into separate function, so it can be extended to register more regulators later. Currently this is only moving ifdeffery into one place and other preparatory changes. The dev_err_probe() output string is changed to explicitly list vbus regulator failure, so that once more regulators are registered, it would be clear which one failed. Reviewed-by:
-
Marek Vasut authored
Let user set battery charge current and voltage limit via sysfs. This is useful in case the user space needs to reduce charge current to keep the system within thermal limits. The maximum charge current and voltage are still limited to "ti,charge-current" and "ti,battery-regulation-voltage" values to avoid damaging the hardware in case too high values are set by user space. Reviewed-by:
-
