- 01 Jun, 2021 1 commit
-
-
Krzysztof Kozlowski authored
Now that the kernel has ftrace, any debugging calls that just do "made it to this function!" and "leaving this function!" can be removed. Better to use standard debugging tools. This allows also to remove several local variables and entire fdp_nci_recv_frame() function (whose purpose was only to log). Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210531073522.6720-1-krzysztof.kozlowski@canonical.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 30 May, 2021 8 commits
-
-
Jakub Kicinski authored
Peter Geis says: ==================== fixes for yt8511 phy driver The Intel clang bot caught a few uninitialized variables in the new Motorcomm driver. While investigating the issue, it was found that the driver would have unintended effects when used in an unsupported mode. Fixed the uninitialized ret variable and abort loading the driver in unsupported modes. ==================== Link: https://lore.kernel.org/r/20210529110556.202531-1-pgwipeout@gmail.comSigned-off-by:
-
Peter Geis authored
While investigating the clang `ge` uninitialized variable report, it was discovered the default switch would have unintended consequences. Due to the switch to __phy_modify, the driver would modify the ID values in the default scenario. Fix this by promoting the interface mode switch and aborting when the mode is not a supported RGMII mode. This prevents the `ge` and `fe` variables from ever being used uninitialized. Fixes: 48e8c6f1 ("net: phy: add driver for Motorcomm yt8511 phy") Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
-
Peter Geis authored
clang doesn't preinitialize variables. If phy_select_page failed and returned an error, phy_restore_page would be called with `ret` being uninitialized. Even though phy_restore_page won't use `ret` in this scenario, initialize `ret` to silence the warning. Fixes: 48e8c6f1 ("net: phy: add driver for Motorcomm yt8511 phy") Reported-by:
-
Jakub Kicinski authored
Yang Yingliang says: ==================== net: dsa: qca8k: check return value of read functions correctly patch #1 - Change return type and add output parameter to make check return value of read functions correctly. patch #2 - Add missing check return value in qca8k_phylink_mac_config(). ==================== Link: https://lore.kernel.org/r/20210529030439.1723306-1-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
Now we can check qca8k_read() return value correctly, so if it fails, we need return directly. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Current return type of qca8k_mii_read32() and qca8k_read() are unsigned, it can't be negative, so the return value check is unuseful. For check the return value correctly, change return type of the read functions and add a output parameter to store the read value. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20210528202225.GA39855@embeddedorSigned-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding a fallthrough statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
- 29 May, 2021 7 commits
-
-
Jakub Kicinski authored
George Cherian says: ==================== NPC KPU updates Add support for - Loading Custom KPU profile entries - Add NPC profile Load from System Firmware DB - Add Support fo Coalescing KPU profiles - General Updates/Fixes to default KPU profile ==================== Link: https://lore.kernel.org/r/20210527094439.1910013-1-george.cherian@marvell.comSigned-off-by:
-
George Cherian authored
Add support for parsing following 1. NGIO 2. PPPOE 3. 24 byte custom L2 header 4. CPT Header 5. Fragmented CPT packets 6. VLAN EXDSA Fix for 1. EDSA VLAN parsing 2. Enhance FDSA 3. CPT Header parsing Remove ITAG support Signed-off-by:
Sunil Kovvuri Goutham <Sunil.Goutham@marvell.com> Signed-off-by:
Harman Kalra <hkalra@marvell.com> Signed-off-by:
Kiran Kumar K <kirankumark@marvell.com> Signed-off-by:
George Cherian <george.cherian@marvell.com> Signed-off-by:
-
Harman Kalra authored
Adding support to load a new type of KPU image, known as coalesced/ consolidated KPU image via firmware database. This image is a consolidation of multiple KPU profiles into a single image. During kernel bootup this coalesced image will be read via firmware database and only the relevant KPU profile will be loaded. Existing functionality of loading single KPU/MKEX profile is intact as the images are differentiated based on the image signature. Signed-off-by:
-
Harman Kalra authored
CN10k introduces following new LT DEF registers: 1. APAD (alignment padding) LT DEF registers are enhancement to existing apad calculation algorithm where not just ipv4 and ipv6 but also other protocols can be matched and required alignment can be added by NIX. 2. ET LT DEF register defines layer information in NPC_RESULT_S to identify the Ethertype location in L2 header. Used for Ethertype overwriting in inline IPsec flow. This patch adds required structures and some header changes. Also strict version check (based on minor field) is imposed to highlight version mismatch between the kernel headers and KPU profile. Signed-off-by:
Jerin Jacob Kollanukkaran <jerinj@marvell.com> Signed-off-by:
-
Harman Kalra authored
Currently NPC profile (KPU + MKEX) can be loaded using firmware binary in filesystem scheme. Enhancing the functionality to load NPC profile image from system firmware database. It uses the same technique as used for loading MKEX profile. Firstly firmware binary in kernel is checked for a valid image else tries to load NPC profile from firmware database and at last uses default profile if no proper image found. Signed-off-by:
-
Stanislaw Kardach authored
Add ability to load a set of custom KPU entries. This allows for flexible support for custom protocol parsing. AF driver will attempt to load the profile and verify if it can fit hardware capabilities. If not, it will revert to the built-in profile. Next it will replace the first KPU_MAX_CST_LT (2) entries in each KPU in default profile with entries read from the profile image. The built-in profile should always contain KPU_MAX_CSR_LT first no-match entries and AF driver will disable those in the KPU unless custom profile is loaded. Profile file contains also a list of default protocol overrides to allow for custom protocols to be used there. Signed-off-by:
Stanislaw Kardach <skardach@marvell.com> Signed-off-by:
-
Zhen Lei authored
Fix to return -EFAULT from the error handling case instead of 0, as done elsewhere in this function. By the way, when get_zeroed_page() fails, directly return -ENOMEM to simplify code. Fixes: 2c69448b ("ehea: DLPAR memory add fix") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210528085555.9390-1-thunder.leizhen@huawei.comSigned-off-by:
-
- 28 May, 2021 24 commits
-
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210528202327.GA39994@embeddedorSigned-off-by:
-
Vladimir Oltean authored
stmmac_mdio_register() has logic to search for PHYs on the MDIO bus and assign them IRQ lines, as well as to set priv->plat->phy_addr. If no PHY is found, the "found" variable remains set to 0 and the function errors out. After the introduction of commit f213bbe8 ("net: stmmac: Integrate it with DesignWare XPCS"), the "found" variable was immediately reused for searching for a PCS on the same MDIO bus. This can result in 2 types of potential problems (none of them seems to be seen on the only Intel system that sets has_xpcs = true, otherwise it would have been reported): 1. If a PCS is found but a PHY is not, then the code happily exits with no error. One might say "yes, but this is not possible, because of_mdiobus_register will probe a PHY for all MDIO addresses, including for the XPCS, so if an XPCS exists, then a PHY certainly exists too". Well, that is not true, see intel_mgbe_common_data(): /* Ensure mdio bus scan skips intel serdes and pcs-xpcs */ plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR; plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR; 2. A PHY is found but an MDIO device with the XPCS PHY ID isn't, and in that case, the error message will be "No PHY found". Confusing. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210527155959.3270478-1-olteanv@gmail.comSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can match either via OF or ACPI ID tables. If one configuration is disabled, the table will be unused: drivers/nfc/st95hf/core.c:1059:34: warning: ‘st95hf_spi_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match either via OF or ACPI ID tables. If one configuration is disabled, the table will be unused: drivers/nfc/st21nfca/i2c.c:593:34: warning: ‘of_st21nfca_i2c_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match either via OF or ACPI ID tables. If one configuration is disabled, the table will be unused: drivers/nfc/st-nci/spi.c:296:34: warning: ‘of_st_nci_spi_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match either via OF or ACPI ID tables. If one configuration is disabled, the table will be unused: drivers/nfc/pn544/i2c.c:53:36: warning: ‘pn544_hci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match either via OF or I2C ID tables. If OF is disabled, the table will be unused: drivers/nfc/s3fwrn5/i2c.c:265:34: warning: ‘of_s3fwrn5_i2c_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match either via OF or I2C ID tables. If OF is disabled, the table will be unused: drivers/nfc/pn533/i2c.c:252:34: warning: ‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The nci_ctrl_hdr.plen field us u8, so checkign if it is bigger than NCI_MAX_PAYLOAD_SIZE does not make any sense. Fix warning reported by Smatch: drivers/nfc/nfcmrvl/i2c.c:52 nfcmrvl_i2c_read() warn: impossible condition '(nci_hdr.plen > 255) => (0-255 > 255)' Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match either via OF or I2C ID tables. If OF is disabled, the table will be unused: drivers/nfc/nfcmrvl/spi.c:199:34: warning: ‘of_nfcmrvl_spi_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF): drivers/nfc/pn533/i2c.c:252:34: warning: ‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
The port100_in_rf_setting structure does not contain valid kerneldoc docummentation, unlike the port100_tg_rf_setting structure. Correct the kerneldoc to fix W=1 warnings: warning: This comment starts with '/**', but isn't a kernel-doc comment. Signed-off-by: -
Krzysztof Kozlowski authored
The driver can match only via the ACPI ID table so the table should be always used and the ACPI_PTR does not have any sense. This fixes fixes compile warning (!CONFIG_ACPI): drivers/nfc/fdp/i2c.c:362:36: warning: ‘fdp_nci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: -
Krzysztof Kozlowski authored
Since structure comments are not kerneldoc, remove the double ** to fix W=1 warnings: warning: This comment starts with '/**', but isn't a kernel-doc comment. Signed-off-by: -
Lorenzo Bianconi authored
Introduce k parameter in pktgen samples in order to toggle UDP tx checksum Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/cf16417902062c6ea2fd3c79e00510e36a40c31a.1622210713.git.lorenzo@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Peng Li says: ==================== net: hdlc_fr: clean up some code style issues V1 -> V2: 1, Use appropriate commit prefix suggested by Jakub Kicinski, replace commit prefix "net: wan" by "net: hdlc_fr". ==================== Link: https://lore.kernel.org/r/1622160769-6678-1-git-send-email-huangguangbin2@huawei.comSigned-off-by:
-
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
This patch removes redundant braces {}, to fix the checkpatch.pl warning: "braces {} are not necessary for any arm of this statement" Signed-off-by: -
Peng Li authored
Braces {} should be used on all arms of this statement. Signed-off-by: -
Peng Li authored
According to the chackpatch.pl, space prohibited after that '!'. Signed-off-by:
-
Peng Li authored
Code indent should use tabs where possible. Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
Add spaces required after that close brace '}'. Add spaces required before the open parenthesis '('. Add spaces required after that ','. Add spaces required around that '='. Signed-off-by: -
Peng Li authored
Fix the checkpatch error as "foo* bar" and should be "foo *bar", and "(foo*)" should be "(foo *)". Signed-off-by:
-
