- 19 Mar, 2018 3 commits
-
-
Jason Gunthorpe authored
What is going on here is a bit subtle, in the kernel there is no problem because the struct is copied using copy_from_user, so it can safely have an 8 byte alignment, however in userspace it must be constructed by concatenation with the ib_uverbs_alloc_pd_resp struct. This is due to the required memory layout to execute the command. Since ibv_uverbs_alloc_pd_resp is only 4 bytes long, this causes misalignment, and the user space will experience an unexpected padding. Currently it works around this via pointer maths. Make everything more robust by having the compiler reduce the alignment of the struct to 4. The userspace has assertions to ensure this works properly in all situations. Signed-off-by:Jason Gunthorpe <jgg@mellanox.com>
-
Honggang Li authored
Before commit f1b65df5 ("IB/mlx5: Add support for active_width and active_speed in RoCE"), the mlx5_ib driver set the default active_width and active_speed to IB_WIDTH_4X and IB_SPEED_QDR. When the RoCE port is down, the RoCE port does not negotiate the active width with the remote side, causing the active width to be zero. When running userspace ibstat to view the port status, ibstat will panic as it reads an invalid width from sys file. This patch restores the original behavior. Fixes: f1b65df5 ("IB/mlx5: Add support for active_width and active_speed in RoCE"). Signed-off-by:
Honggang Li <honli@redhat.com> Reviewed-by:
Hal Rosenstock <hal@mellanox.com> Reviewed-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
-
Honggang Li authored
Before commit f1b65df5 ("IB/mlx5: Add support for active_width and active_speed in RoCE"), the mlx5_ib driver set default active_width and active_speed to IB_WIDTH_4X and IB_SPEED_QDR. Now, the active_width and active_speed are zeros if the RoCE port is in DOWN state. The speed string should be set to " SDR" instead of a blank string when active_speed is zero. Signed-off-by:
-
- 16 Mar, 2018 1 commit
-
-
Leon Romanovsky authored
The restrack code relies on the fact that object structures are zeroed at the allocation stage, the mlx4 CQ wasn't allocated with kzalloc and it caused to the following crash. [ 137.392209] general protection fault: 0000 [#1] SMP KASAN PTI [ 137.392972] CPU: 0 PID: 622 Comm: ibv_rc_pingpong Tainted: G W 4.16.0-rc1-00099-g00313983 #11 [ 137.395079] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 137.396866] RIP: 0010:rdma_restrack_del+0xc8/0xf0 [ 137.397762] RSP: 0018:ffff8801b54e7968 EFLAGS: 00010206 [ 137.399008] RAX: 0000000000000000 RBX: ffff8801d8bcbae8 RCX: ffffffffb82314df [ 137.400055] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: 70696b533d454741 [ 137.401103] RBP: ffff8801d90c07a0 R08: ffff8801d8bcbb00 R09: 0000000000000000 [ 137.402470] R10: 0000000000000001 R11: ffffed0036a9cf52 R12: ffff8801d90c0ad0 [ 137.403318] R13: ffff8801d853fb20 R14: ffff8801d8bcbb28 R15: 0000000000000014 [ 137.404736] FS: 00007fb415d43740(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 137.406074] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.407101] CR2: 00007fb41557df20 CR3: 00000001b580c001 CR4: 00000000003606b0 [ 137.408308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 137.409352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 137.410385] Call Trace: [ 137.411058] ib_destroy_cq+0x23/0x60 [ 137.411460] uverbs_free_cq+0x37/0xa0 [ 137.412040] remove_commit_idr_uobject+0x38/0xf0 [ 137.413042] _rdma_remove_commit_uobject+0x5c/0x160 [ 137.413782] ? lookup_get_idr_uobject+0x39/0x50 [ 137.414737] rdma_remove_commit_uobject+0x3b/0x70 [ 137.415742] ib_uverbs_destroy_cq+0x114/0x1d0 [ 137.416260] ? ib_uverbs_req_notify_cq+0x160/0x160 [ 137.417073] ? kernel_text_address+0x5c/0x90 [ 137.417805] ? __kernel_text_address+0xe/0x30 [ 137.418766] ? unwind_get_return_address+0x2f/0x50 [ 137.419558] ib_uverbs_write+0x453/0x6a0 [ 137.420220] ? show_ibdev+0x90/0x90 [ 137.420653] ? __kasan_slab_free+0x136/0x180 [ 137.421155] ? kmem_cache_free+0x78/0x1e0 [ 137.422192] ? remove_vma+0x83/0x90 [ 137.422614] ? do_munmap+0x447/0x6c0 [ 137.423045] ? vm_munmap+0xb0/0x100 [ 137.423481] ? SyS_munmap+0x1d/0x30 [ 137.424120] ? do_syscall_64+0xeb/0x250 [ 137.424984] ? entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 137.425611] ? lru_add_drain_all+0x270/0x270 [ 137.426116] ? lru_add_drain_cpu+0xa3/0x170 [ 137.426616] ? lru_add_drain+0x11/0x20 [ 137.427058] ? free_pages_and_swap_cache+0xa6/0x120 [ 137.427672] ? tlb_flush_mmu_free+0x78/0x90 [ 137.428168] ? arch_tlb_finish_mmu+0x6d/0xb0 [ 137.428680] __vfs_write+0xc4/0x350 [ 137.430917] ? kernel_read+0xa0/0xa0 [ 137.432758] ? remove_vma+0x90/0x90 [ 137.434781] ? __kasan_slab_free+0x14b/0x180 [ 137.437486] ? remove_vma+0x83/0x90 [ 137.439836] ? kmem_cache_free+0x78/0x1e0 [ 137.442195] ? percpu_counter_add_batch+0x1d/0x90 [ 137.444389] vfs_write+0xf7/0x280 [ 137.446030] SyS_write+0xa1/0x120 [ 137.447867] ? SyS_read+0x120/0x120 [ 137.449670] ? mm_fault_error+0x180/0x180 [ 137.451539] ? _cond_resched+0x16/0x50 [ 137.453697] ? SyS_read+0x120/0x120 [ 137.455883] do_syscall_64+0xeb/0x250 [ 137.457686] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 137.459595] RIP: 0033:0x7fb415637b94 [ 137.461315] RSP: 002b:00007ffdebea7d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 137.463879] RAX: ffffffffffffffda RBX: 00005565022d1bd0 RCX: 00007fb415637b94 [ 137.466519] RDX: 0000000000000018 RSI: 00007ffdebea7da0 RDI: 0000000000000003 [ 137.469543] RBP: 00007ffdebea7d98 R08: 0000000000000000 R09: 00005565022d40c0 [ 137.472479] R10: 00000000000009cf R11: 0000000000000246 R12: 00005565022d2520 [ 137.475125] R13: 00000000000003e8 R14: 0000000000000000 R15: 00007ffdebea7fd0 [ 137.477760] Code: f7 e8 dd 0d 0b ff 48 c7 43 40 00 00 00 00 48 89 df e8 0d 0b 0b ff 48 8d 7b 28 c6 03 00 e8 41 0d 0b ff 48 8b 7b 28 48 85 ff 74 06 <f0> ff 4f 48 74 10 5b 48 89 ef 5d 41 5c 41 5d 41 5e e9 32 b0 ee [ 137.483375] RIP: rdma_restrack_del+0xc8/0xf0 RSP: ffff8801b54e7968 [ 137.486436] ---[ end trace 81835a1ea6722eed ]--- [ 137.488566] Kernel panic - not syncing: Fatal exception [ 137.491162] Kernel Offset: 0x36000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 00313983 ("RDMA/nldev: provide detailed CM_ID information") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
- 15 Mar, 2018 29 commits
-
-
Guy Levi authored
As a default, for Ethernet packets, the device scatters only the payload of ingress packets. The scatter FCS feature lets the user to get the FCS (Ethernet's frame check sequence) in the received WR's buffer as a 4 Bytes trailer following the packet's payload. Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Guy Levi <guyle@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Yishai Hadas authored
Report to the user area the TSO device capabilities, it includes the max_tso size and the QP types that support it. The TSO is applicable only when when of the ports is ETH and the device supports it. uresp logic around rss_caps is updated to fix a till-now harmless bug computing the length of the structure to copy. The code did not handle the implicit padding before rss_caps correctly. This is necessay to copy tss_caps successfully. Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Henry Orosco authored
There is no explicit tear-down sequence initiated on connections if the Control QP OP, Modify QP to close, fails. Fix this by triggering a driver generated Asynchronous Event (AE) on Modify QP failures and tear-down the connection on receipt of the AE. This fix can be generalized to other Modify QP failures (i.e. RTS->TERM, IDLE->RTS, etc) as any modify failure will require a connection tear-down. Fixes: d3749841 ("i40iw: add files for iwarp interface") Signed-off-by:
Henry Orosco <henry.orosco@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Henry Orosco authored
The flush CQP OP can be used to optionally generate Asynchronous Events (AEs) in addition to QP flush. Consolidate all HW AE generation code under a new function i40iw_gen_ae which use the flush CQP OP to only generate AEs. Signed-off-by:
-
Jason Gunthorpe authored
Open coding a loose value is not acceptable for describing the uABI in RDMA. Provide the missing struct. Reviewed-by:
-
Jason Gunthorpe authored
Open coding a loose value is not acceptable for describing the uABI in RDMA. Provide the missing struct. Signed-off-by: -
Jason Gunthorpe authored
All of these defines are part of the uABI for the driver, this header duplicates providers/i40iw/i40iw-abi.h in rdma-core. Acked-by:
-
Jason Gunthorpe authored
MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps) and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to userspace and form part of the uAPI. Move them to the uapi header where they belong. Signed-off-by: -
Jason Gunthorpe authored
Open coding pointer math is not acceptable for describing the uABI in RDMA. Provide structs for all the cases. The udata is casted to the struct as close to the verbs entry point as possible for maximum clarity. Function signatures and so forth are revised to allow for this. Tested-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Jason Gunthorpe authored
It isn't used and it couldn't possibly ever be used correctly. Tested-by:
-
Tejun Heo authored
rvt_mregion uses percpu_ref for reference counting and RCU to protect accesses from lkey_table. When a rvt_mregion needs to be freed, it first gets unregistered from lkey_table and then rvt_check_refs() is called to wait for in-flight usages before the rvt_mregion is freed. rvt_check_refs() seems to have a couple issues. * It has a fast exit path which tests percpu_ref_is_zero(). However, a percpu_ref reading zero doesn't mean that the object can be released. In fact, the ->release() callback might not even have started executing yet. Proceeding with freeing can lead to use-after-free. * lkey_table is RCU protected but there is no RCU grace period in the free path. percpu_ref uses RCU internally but it's sched-RCU whose grace periods are different from regular RCU. Also, it generally isn't a good idea to depend on internal behaviors like this. To address the above issues, this patch removes the fast exit and adds an explicit synchronize_rcu(). Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: linux-rdma@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sinan Kaya authored
Code includes wmb() followed by writel() in multiple places. writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Since code already has an explicit barrier call, changing writel() to writel_relaxed(). Signed-off-by:
Sinan Kaya <okaya@codeaurora.org> Signed-off-by:
-
Yixian Liu authored
This patch changes the type of cqn from u32 to u64 to keep userspace and kernel consistent, initializes resp both for cq and qp to zeros, and also changes the condition judgment of outlen considering future caps extension. Suggested-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by:
Shaobo Xu <xushaobo2@huawei.com> Signed-off-by:
-
Parav Pandit authored
Before commit [1], rdma_addr_find_l2_eth_by_grh() was an exported function and therefore declaration in include/rdma/ib_addr.h was fine. But now that its scope is limited to ib_core module, its better to have it in core_priv.h. [1] commit 1060f865 ("IB/{core/cm}: Fix generating a return AH for RoCEE") Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Introduce and use helper function get_cm_port_from_path() to get cm_port based on the the path record entry. Reviewed-by:
-
Parav Pandit authored
Resolving route for RoCE for a path record is needed only for the received CM requests. Therefore, (a) ib_init_ah_attr_from_path() is refactored first to isolate the code of resolving route. (b) Setting dlid, path bits is not needed for RoCE. Additionally ah attribute initialization is done from the path record entry, so it is better to refer to path record entry type for different link layer instead of ah attribute type while initializing ah attribute itself. Signed-off-by:
-
Parav Pandit authored
Add and use helper function add_cm_id_to_port_list() to attach cm_id to port list. Reviewed-by:
-
Parav Pandit authored
add_gid() and del_gid() are optional callback routines. ib_core ignores invoking them while updating GID table entries if they are not implemented by provider drivers. Therefore remove them. Reviewed-by:
-
Parav Pandit authored
rdma_resolve_ip_route() is used only by ib_core module. Therefore it is removed as an exported symbol. Reviewed-by:
-
Parav Pandit authored
rdma_protocol_roce() API from the ib_core already provides a way to detect whether a given device+port is RoCE or not. Therefore, make use of it and avoid implementing it again in rdmacm module. Reviewed-by:
-
Parav Pandit authored
ah_attr contains the port number to which cm_id is bound. However, while searching for GID table for matching GID entry, the port number is ignored. This could cause the wrong GID to be used when the ah_attr is converted to an AH. Reviewed-by:
-
Parav Pandit authored
The return status of ib_init_ah_from_mcmember() is ignored by cma_ib_mc_handler(). Honor it and return error event if ah attribute initialization failed. Reviewed-by:
-
Parav Pandit authored
ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table entries are not based on netdevice. Netdevice parameter is unused here. Therefore, it is removed. Reviewed-by:
-
Parav Pandit authored
Exported symbol's comments should be with function definition and not in the header file. Therefore comments of ib_find_cached_gid() and ib_find_cached_gid_by_port() functions are moved closer to their definitions. The function name in then comment is different than the actual function name, fix it to be same as ib_cache_gid_find_by_filter(). Also current comment section of ib_find_cached_gid_by_port() contains the desciption of ib_find_cached_gid(), fix that as well. Reviewed-by:
-
Leon Romanovsky authored
The failure to destroy the MRs is printed on mlx5_core layer as error and it makes warning prints useless. Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
"live" is needed for ODP only and is better to be guarded by appropriate CONFIG. Signed-off-by:
-
Leon Romanovsky authored
According to the IBTA spec 1.3, the driver failure in MR reregister shall release old and new MRs. C11-20: If the CI returns any other error, the CI shall invalidate both "old" and "new" registrations, and release any associated resources. Signed-off-by:
-
Leon Romanovsky authored
Return -EOPNOTSUPP value to the user for unsupported reg_user_mr. Signed-off-by:
-
Leon Romanovsky authored
The mlx5_ib_alloc_implicit_mr() can fail to acquire pages and the returned mr pointer won't be valid. Ensure that it is not error prior to access. Cc: <stable@vger.kernel.org> # 4.10 Fixes: 81713d37 ("IB/mlx5: Add implicit MR support") Reported-by:
-
- 14 Mar, 2018 7 commits
-
-
Doug Ledford authored
Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch Signed-off-by:
-
Arnd Bergmann authored
On 32-bit targets, we otherwise get a warning about an impossible constant integer expression: In file included from include/linux/kernel.h:11, from include/linux/interrupt.h:6, from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device': include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow] #define BIT(nr) (1UL << (nr)) ^~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT' #define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39) ^~~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH' #define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE' ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE; ^~~~~~~~~~~~~~~~~~~ Fixes: 872f3578 ("RDMA/bnxt_re: Add support for MRs with Huge pages") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
Building for a 32-bit target results in a couple of warnings from casting between a 32-bit pointer and a 64-bit integer: drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq': drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle, ^ drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] (struct bnxt_qplib_srq *)q_handle, ^ In file included from include/linux/byteorder/little_endian.h:5, from arch/arm/include/uapi/asm/byteorder.h:22, from include/asm-generic/bitops/le.h:6, from arch/arm/include/asm/bitops.h:342, from include/linux/bitops.h:38, from include/linux/kernel.h:11, from include/linux/interrupt.h:6, from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39: drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq': include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) ^ include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64' #define cpu_to_le64 __cpu_to_le64 ^~~~~~~~~~~~~ drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64' req.srq_handle = cpu_to_le64(srq); Using a uintptr_t as an intermediate works on all architectures. Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: -
Andrew Morton authored
gcc-4.4.4 has issues with initialization of anonymous unions: drivers/infiniband/ulp/srpt/ib_srpt.c: In function 'srpt_zerolength_write': drivers/infiniband/ulp/srpt/ib_srpt.c:854: error: unknown field 'wr_cqe' specified in initializer drivers/infiniband/ulp/srpt/ib_srpt.c:854: warning: initialization makes integer from pointer without a cast Work aound this. Fixes: 2a78cb4d ("IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
gcc-4.4.4 has issues with initialization of anonymous unions. drivers/infiniband/core/verbs.c: In function '__ib_drain_sq': drivers/infiniband/core/verbs.c:2204: error: unknown field 'wr_cqe' specified in initializer drivers/infiniband/core/verbs.c:2204: warning: initialization makes integer from pointer without a cast Work around this. Fixes: a1ae7d03 ("RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack access") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mark Bloch authored
On load we create private CQ/QP/PD in order to be used by UMR, we create those resources after we register ourself as an IB device, and we destroy them after we unregister as an IB device. This was changed by commit 16c1975f ("IB/mlx5: Create profile infrastructure to add and remove stages") which moved the destruction before we unregistration. This allowed to trigger an invalid memory access when unloading mlx5_ib while there are open resources: BUG: unable to handle kernel paging request at 00000001002c012c ... Call Trace: mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib] __slab_free+0x9a/0x2d0 delay_time_func+0x10/0x10 [mlx5_ib] unreg_umr.isra.15+0x4b/0x50 [mlx5_ib] mlx5_mr_cache_free+0x46/0x150 [mlx5_ib] clean_mr+0xc9/0x190 [mlx5_ib] dereg_mr+0xba/0xf0 [mlx5_ib] ib_dereg_mr+0x13/0x20 [ib_core] remove_commit_idr_uobject+0x16/0x70 [ib_uverbs] uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs] ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs] ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs] ib_unregister_device+0xd4/0x190 [ib_core] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] mlx5_remove_device+0xf5/0x120 [mlx5_core] mlx5_unregister_interface+0x37/0x90 [mlx5_core] mlx5_ib_cleanup+0xc/0x225 [mlx5_ib] SyS_delete_module+0x153/0x230 do_syscall_64+0x62/0x110 entry_SYSCALL_64_after_hwframe+0x21/0x86 ... We restore the original behavior by breaking the UMR stage into two parts, pre and post IB registration stages, this way we can restore the original functionality and maintain clean separation of logic between stages. Fixes: 16c1975f ("IB/mlx5: Create profile infrastructure to add and remove stages") Signed-off-by:
-
Martin Wilck authored
This patch fixes RDMA/rxe over 802.1q VLAN devices. Without it, I observed the following behavior: a) adding a VLAN device to RXE via rxe_net_add() creates a non-functional RDMA device. This is caused by the logic in enum_all_gids_of_dev_cb() / is_eth_port_of_netdev(), which only considers networks connected to "upper devices" of the configured network device, resulting in an empty set of gids for a VLAN interface that is an "upper device" itself. Later attempts to connect via this rdma device fail in cma_acuire_dev() because no gids can be resolved. b) adding the master device of the VLAN device instead seems to work initially, target addresses via VLAN devices are resolved successfully. But the connection times out because no 802.1q VLAN headers are inserted in the ethernet packets, which are therefore never received. This happens because the RXE layer sends the packets via the master device rather than the VLAN device. The problem could be solved by changing either a) or b). My thinking was that the logic in a) was created deliberately, thus I decided to work on b). It turns out that the information about the VLAN interface for the gid at hand is available in the AV information. My patch converts the RXE code to use this netdev instead of rxe->ndev. With this change, RXE over vlan works on my test system. Signed-off-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
