Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:

[  +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[  +0.000010] #PF: supervisor read access in kernel mode
[  +0.000005] #PF: error_code(0x0000) - not-present page
[  +0.000004] PGD 0 P4D 0
[  +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[  +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[  +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[  +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[  +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[  +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[  +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[  +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[  +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[  +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[  +0.000004] FS:  00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[  +0.000003] PKRU: 55555554
[  +0.000003] Call Trace:
[  +0.000006]  <TASK>
[  +0.000006]  ? __die+0x23/0x70
[  +0.000011]  ? page_fault_oops+0x17d/0x4c0
[  +0.000008]  ? preempt_count_add+0x6e/0xa0
[  +0.000008]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000011]  ? exc_page_fault+0x7f/0x180
[  +0.000009]  ? asm_exc_page_fault+0x26/0x30
[  +0.000013]  ? i2c_transfer+0xd/0x100
[  +0.000010]  drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[  +0.000067]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000006]  ? _drm_do_get_edid+0x97/0x3c0 [drm]
[  +0.000043]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000042]  edid_block_read+0x3b/0xd0 [drm]
[  +0.000043]  _drm_do_get_edid+0xb6/0x3c0 [drm]
[  +0.000041]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000043]  drm_edid_read_custom+0x37/0xd0 [drm]
[  +0.000044]  amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[  +0.000153]  drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[  +0.000000]  __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[  +0.000000]  ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[  +0.000000]  status_store+0xb2/0x1f0 [drm]
[  +0.000000]  kernfs_fop_write_iter+0x136/0x1d0
[  +0.000000]  vfs_write+0x24d/0x440
[  +0.000000]  ksys_write+0x6f/0xf0
[  +0.000000]  do_syscall_64+0x60/0xc0
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? syscall_exit_to_user_mode+0x2b/0x40
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  +0.000000] RIP: 0033:0x7f9ad46b4b00
[  +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[  +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[  +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[  +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[  +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[  +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[  +0.000000]  </TASK>
[  +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[  +0.000000]  snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[  +0.000000]  usb_common crct10dif_common video wmi
[  +0.000000] CR2: 00000000000004c0
[  +0.000000] ---[ end trace 0000000000000000 ]---

Fixes: 0e859faf ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:

unreferenced object 0xffff896302b45800 (size 1024):
  comm "(udev-worker)", pid 222, jiffies 4294894636
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 6265fd77):
    [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
    [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
    [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
    [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
    [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
    [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
    [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
    [<ffffffff996918a3>] pci_device_probe+0xc3/0x230
    [<ffffffff99805872>] really_probe+0xe2/0x480
    [<ffffffff99805c98>] __driver_probe_device+0x78/0x160
    [<ffffffff99805daf>] driver_probe_device+0x1f/0x90
    [<ffffffff9980601e>] __driver_attach+0xce/0x1c0
    [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
    [<ffffffff99804822>] bus_add_driver+0x112/0x210
    [<ffffffff99807245>] driver_register+0x55/0x100
    [<ffffffff990012d1>] do_one_initcall+0x41/0x300

Fix this by freeing dmub_srv after destroying it.

Fixes: 743b9786 ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.

[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.

In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.

Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.

Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)

Fixes: 028bac58 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb7 ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.

[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component

Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:

1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.

2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence

[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.

Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()

Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Reformat nested if-conditionals in Makefiles with 4 spaces

 - Fix CONFIG_DEBUG_INFO_BTF builds for big endian

 - Fix modpost for module srcversion

 - Fix an escape sequence warning in gen_compile_commands.py

 - Fix kallsyms to ignore ARMv4 thunk symbols

* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kallsyms: ignore ARMv4 thunks along with others
  modpost: trim leading spaces when processing source files list
  gen_compile_commands: fix invalid escape sequence warning
  kbuild: Fix changing ELF file type for output of gen_btf for big endian
  docs: kconfig: Fix grammar and formatting
  kbuild: use 4-space indentation when followed by conditionals

Pull x86 fix from Borislav Petkov:

 - Use a GB page for identity mapping only when memory of this size is
   requested so that mapping of reserved regions is prevented which
   would otherwise lead to system crashes on UV machines

* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/ident_map: Use gbpages only where full GB page should be mapped.

Pull irq fixes from Borislav Petkov:

 - Fix GICv4.1 affinity update

 - Restore a quirk for ACPI-based GICv4 systems

 - Handle non-coherent GICv4 redistributors properly

 - Prevent spurious interrupts on Broadcom devices using GIC v3
   architecture

 - Other minor fixes

* tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update
  irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
  irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors
  irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()
  irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()
  irqchip/irq-brcmstb-l2: Add write memory barrier before exit

Pull i2c fixes from Wolfram Sang:
 "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
  addresses a compilation error encountered during compile test on
  powerpc"

* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix block process call transactions
  i2c: pasemi: split driver into two separate modules
  i2c: qcom-geni: Correct I2C TRE sequence

Pull powerpc fixes from Michael Ellerman:
 "This is a bit of a big batch for rc4, but just due to holiday hangover
  and because I didn't send any fixes last week due to a late revert
  request. I think next week should be back to normal.

   - Fix ftrace bug on boot caused by exit text sections with
     '-fpatchable-function-entry'

   - Fix accuracy of stolen time on pseries since the switch to
     VIRT_CPU_ACCOUNTING_GEN

   - Fix a crash in the IOMMU code when doing DLPAR remove

   - Set pt_regs->link on scv entry to fix BPF stack unwinding

   - Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke
     gdb

   - Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled

   - Fix build failures with KASAN enabled and 32KB stack size

   - Some other minor fixes

  Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David
  Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias
  Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A,
  R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy,
  Srikar Dronamraju, and Venkat Rao Bagalkote"

* tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
  powerpc/pseries: fix accuracy of stolen time
  powerpc/ftrace: Ignore ftrace locations in exit text sections
  powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
  powerpc/kasan: Limit KASAN thread size increase to 32KB
  Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
  powerpc: 85xx: mark local functions static
  powerpc: udbg_memcons: mark functions static
  powerpc/kasan: Fix addr error caused by page alignment
  powerpc/6xx: set High BAT Enable flag on G2_LE cores
  selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code()
  powerpc/64: Set task pt_regs->link to the LR value on scv entry
  powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
  powerpc/pseries/papr-sysparm: use u8 arrays for payloads

Pull bcachefs fixes from Kent Overstreet:
 "Mostly pretty trivial, the user visible ones are:

   - don't barf when replicas_required > replicas

   - fix check_version_upgrade() so it doesn't do something nonsensical
     when we're downgrading"

* tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix missing va_end()
  bcachefs: Fix check_version_upgrade()
  bcachefs: Clamp replicas_required to replicas
  bcachefs: fix missing endiannes conversion in sb_members
  bcachefs: fix kmemleak in __bch2_read_super error handling path
  bcachefs: Fix missing bch2_err_class() calls

Pull driver core fixes from Greg KH:
 "Here are some driver core fixes, a kobject fix, and a documentation
  update for 6.8-rc5. In detail these changes are:

   - devlink fixes for reported issues with 6.8-rc1

   - topology scheduling regression fix that has been reported by many

   - kobject loosening of checks change in -rc1 is now reverted as some
     codepaths seemed to need the checks

   - documentation update for the CVE process. Has been reviewed by
     many, the last minute change to the document was to bring the .rst
     format back into the the new style rules, the contents did not
     change.

  All of these, except for the documentation update, have been in
  linux-next for over a week. The documentation update has been reviewed
  for weeks by a group of developers, and in public for a week and the
  wording has stabilized for now. If future changes are needed, we can
  do so before 6.8-final is out (or anytime after that)"

* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: Document the Linux Kernel CVE process
  Revert "kobject: Remove redundant checks for whether ktype is NULL"
  driver core: fw_devlink: Improve logs for cycle detection
  driver core: fw_devlink: Improve detection of overlapping cycles
  driver core: Fix device_link_flag_is_sync_state_only()
  topology: Set capacity_freq_ref in all cases

Pull char / miscdriver fixes from Greg KH:
 "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.

  Included in here are:

   - lots of iio driver fixes for reported issues

   - nvmem device naming fixup for reported problem

   - interconnect driver fixes for reported issues

  All of these have been in linux-next for a while with no reported the
  issues (the nvmem patch was included in a different branch in
  linux-next before sent to me for inclusion here)"

* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  nvmem: include bit index in cell sysfs file name
  iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  iio: adc: ad4130: zero-initialize clock init data
  interconnect: qcom: x1e80100: Add missing ACV enable_mask
  interconnect: qcom: sm8650: Use correct ACV enable_mask
  iio: accel: bma400: Fix a compilation problem
  iio: commom: st_sensors: ensure proper DMA alignment
  iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
  iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
  staging: iio: ad5933: fix type mismatch regression
  iio: humidity: hdc3020: fix temperature offset
  iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
  iio: adc: ad_sigma_delta: ensure proper DMA alignment
  iio: imu: adis: ensure proper DMA alignment
  iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  iio: imu: bno055: serdev requires REGMAP
  iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  iio: pressure: bmp280: Add missing bmp085 to SPI id table
  iio: core: fix memleak in iio_device_register_sysfs
  interconnect: qcom: sm8550: Enable sync_state
  ...

Pull tty / serial fixes from Greg KH:
 "Here are three small tty and serial driver fixes for 6.8-rc5:

   - revert a 8250_pci1xxxx off-by-one change that was incorrect

   - two changes to fix the transmit path of the mxs-auart driver,
     fixing a regression in the 6.2 release

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: mxs-auart: fix tx
  serial: core: introduce uart_port_tx_flags()
  serial: 8250_pci1xxxx: partially revert off by one patch

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are two small fixes for 6.8-rc5:

   - thunderbolt to fix a reported issue on many platforms

   - dwc3 driver revert of a commit that caused problems in -rc1

  Both of these changes have been in linux-next for over a week with no
  reported issues"

* tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: dwc3: Support EBC feature of DWC_usb31"
  thunderbolt: Fix setting the CNS bit in ROUTER_CS_5

Pull media fixes from Mauro Carvalho Chehab:

 - regression fix for rkisp1 shared IRQ logic

 - fix atomisp breakage due to a kAPI change

 - permission fix for remote controller BPF support

 - memleak fix in ir_toy driver

 - Kconfig dependency fix for pwm-ir-rx

* tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS
  media: ir_toy: fix a memleak in irtoy_tx
  media: rc: bpf attach/detach requires write permission
  media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8
  media: rkisp1: Fix IRQ handling due to shared interrupts
  media: Revert "media: rkisp1: Drop IRQF_SHARED"

Pull pci fixes from Bjorn Helgaas:

 - Keep bridges in D0 if we need to poll downstream devices for PME to
   resolve a v6.6 regression where we failed to enumerate devices below
   bridges put in D3hot by runtime PM, e.g., NVMe drives connected via
   Thunderbolt or USB4 docks (Alex Williamson)

 - Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer

* tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
  PCI: Fix active state requirement in PME polling

Merge tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fix from Masami Hiramatsu:

 - tracing/probes: Fix BTF structure member finder to find the members
   which are placed after any anonymous union member correctly.

* tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to search structure fields correctly

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, most also for stable:

   - Two multichannel fixes (one to fix potential handle leak on retry)

   - Work around possible serious data corruption (due to change in
     folios in 6.3, for cases when non standard maximum write size
     negotiated)

   - Symlink creation fix

   - Multiuser automount fix"

* tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: Fix regression in writes when non-standard maximum write size negotiated
  smb: client: handle path separator of created SMB symlinks
  smb: client: set correct id, uid and cruid for multiuser automounts
  cifs: update the same create_guid on replay
  cifs: fix underflow in parse_server_interfaces()

The Linux kernel project now has the ability to assign CVEs to fixed
issues, so document the process and how individual developers can get a
CVE if one is not automatically assigned for their fixes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/2024021731-essence-sadness-28fd@gregkhSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to search a field from the structure which has anonymous union
correctly.
Since the reference `type` pointer was updated in the loop, the search
loop suddenly aborted where it hits an anonymous union. Thus it can not
find the field after the anonymous union. This avoids updating the
cursor `type` pointer in the loop.

Link: https://lore.kernel.org/all/170791694361.389532.10047514554799419688.stgit@devnote2/

Fixes: 302db0f5 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Merge tag 'i2c-host-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Three fixes are included here. Two are strictly hardware-related
for the i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc.

Since I have been contributing to the driver for a while and wish to help
with the review process, add myself as a reviewer.

Link: https://lore.kernel.org/r/20240216065926.473805-1-s-vadapalli@ti.comSigned-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull SCSI fixes from James Bottomley:
 "Three fixes: the two fnic ones are a revert and a refix, which is why
  the diffstat is a bit big. The target one also extracts a function to
  add a check for configuration and so looks bigger than it is"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Move fnic_fnic_flush_tx() to a work queue
  scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
  scsi: target: Fix unmap setup during configuration

Pull workqueue fix from Tejun Heo:
 "Just one patch to revert commit ca10d851 ("workqueue: Override
  implicit ordered attribute in workqueue_apply_unbound_cpumask()").

  This commit could break ordering guarantees for ordered workqueues.
  The problem that the commit tried to resolve partially - making
  ordered workqueues follow unbound cpumask - is fully solved in
  wq/for-6.9 branch"

* tag 'wq-for-6.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  Revert "workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()"

Pull block fixes from Jens Axboe:
 "Just an nvme pull request via Keith:

   - Fabrics connection error handling (Chaitanya)

   - Use relaxed effects to reduce unnecessary queue freezes (Keith)"

* tag 'block-6.8-2024-02-16' of git://git.kernel.dk/linux:
  nvmet: remove superfluous initialization
  nvme: implement support for relaxed effects
  nvme-fabrics: fix I/O connect error handling

Pull io_uring fix from Jens Axboe:
 "Just a single fix for a regression in how overflow is handled for
  multishot accept requests"

* tag 'io_uring-6.8-2024-02-16' of git://git.kernel.dk/linux:
  io_uring/net: fix multishot accept overflow handling

Pull ceph fixes from Ilya Dryomov:
 "Additional cap handling fixes from Xiubo to avoid "client isn't
  responding to mclientcaps(revoke)" stalls on the MDS side"

* tag 'ceph-for-6.8-rc5' of https://github.com/ceph/ceph-client:
  ceph: add ceph_cap_unlink_work to fire check_caps() immediately
  ceph: always queue a writeback when revoking the Fb caps

Pull KVM fixes from Paolo Bonzini:
 "ARM:

   - Avoid dropping the page refcount twice when freeing an unlinked
     page-table subtree.

   - Don't source the VFIO Kconfig twice

   - Fix protected-mode locking order between kvm and vcpus

  RISC-V:

   - Fix steal-time related sparse warnings

  x86:

   - Cleanup gtod_is_based_on_tsc() to return "bool" instead of an "int"

   - Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if
     and only if the incoming events->nmi.pending is non-zero. If the
     target vCPU is in the UNITIALIZED state, the spurious request will
     result in KVM exiting to userspace, which in turn causes QEMU to
     constantly acquire and release QEMU's global mutex, to the point
     where the BSP is unable to make forward progress.

   - Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl
     being incorrectly truncated, and ultimately causes KVM to think a
     fixed counter has already been disabled (KVM thinks the old value
     is '0').

   - Fix a stack leak in KVM_GET_MSRS where a failed MSR read from
     userspace that is ultimately ignored due to ignore_msrs=true
     doesn't zero the output as intended.

  Selftests cleanups and fixes:

   - Remove redundant newlines from error messages.

   - Delete an unused variable in the AMX test (which causes build
     failures when compiling with -Werror).

   - Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails
     with an error code other than ENOENT (a Hyper-V selftest bug
     resulted in an EMFILE, and the test eventually got skipped).

   - Fix TSC related bugs in several Hyper-V selftests.

   - Fix a bug in the dirty ring logging test where a sem_post() could
     be left pending across multiple runs, resulting in incorrect
     synchronization between the main thread and the vCPU worker thread.

   - Relax the dirty log split test's assertions on 4KiB mappings to fix
     false positives due to the number of mappings for memslot 0 (used
     for code and data that is NOT being dirty logged) changing, e.g.
     due to NUMA balancing"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
  KVM: arm64: Fix double-free following kvm_pgtable_stage2_free_unlinked()
  RISC-V: KVM: Use correct restricted types
  RISC-V: paravirt: Use correct restricted types
  RISC-V: paravirt: steal_time should be static
  KVM: selftests: Don't assert on exact number of 4KiB in dirty log split test
  KVM: selftests: Fix a semaphore imbalance in the dirty ring logging test
  KVM: x86: Fix KVM_GET_MSRS stack info leak
  KVM: arm64: Do not source virt/lib/Kconfig twice
  KVM: x86/pmu: Fix type length error when reading pmu->fixed_ctr_ctrl
  KVM: x86: Make gtod_is_based_on_tsc() return 'bool'
  KVM: selftests: Make hyperv_clock require TSC based system clocksource
  KVM: selftests: Run clocksource dependent tests with hyperv_clocksource_tsc_page too
  KVM: selftests: Use generic sys_clocksource_is_tsc() in vmx_nested_tsc_scaling_test
  KVM: selftests: Generalize check_clocksource() from kvm_clock_test
  KVM: x86: make KVM_REQ_NMI request iff NMI pending for vcpu
  KVM: arm64: Fix circular locking dependency
  KVM: selftests: Fail tests when open() fails with !ENOENT
  KVM: selftests: Avoid infinite loop in hyperv_features when invtsc is missing
  KVM: selftests: Delete superfluous, unused "stage" variable in AMX test
  KVM: selftests: x86_64: Remove redundant newlines
  ...

Pull tracing fixes from Steven Rostedt:

 - Fix the #ifndef that didn't have the 'CONFIG_' prefix on
   HAVE_DYNAMIC_FTRACE_WITH_REGS

   The fix to have dynamic trampolines work with x86 broke arm64 as the
   config used in the #ifdef was HAVE_DYNAMIC_FTRACE_WITH_REGS and not
   CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which removed the fix that the
   previous fix was to fix.

 - Fix tracing_on state

   The code to test if "tracing_on" is set incorrectly used
   ring_buffer_record_is_on() which returns false if the ring buffer
   isn't able to be written to.

   But the ring buffer disable has several bits that disable it. One is
   internal disabling which is used for resizing and other modifications
   of the ring buffer. But the "tracing_on" user space visible flag
   should only report if tracing is actually on and not internally
   disabled, as this can cause confusion as writing "1" when it is
   disabled will not enable it.

   Instead use ring_buffer_record_is_set_on() which shows the user space
   visible settings.

 - Fix a false positive kmemleak on saved cmdlines

   Now that the saved_cmdlines structure is allocated via alloc_page()
   and not via kmalloc() it has become invisible to kmemleak. The
   allocation done to one of its pointers was flagged as a dangling
   allocation leak. Make kmemleak aware of this allocation and free.

 - Fix synthetic event dynamic strings

   An update that cleaned up the synthetic event code removed the return
   value of trace_string(), and had it return zero instead of the
   length, causing dynamic strings in the synthetic event to always have
   zero size.

 - Clean up documentation and header files for seq_buf

* tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  seq_buf: Fix kernel documentation
  seq_buf: Don't use "proxy" headers
  tracing/synthetic: Fix trace_string() return value
  tracing: Inform kmemleak of saved_cmdlines allocation
  tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
  tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef

Pull arm64 fixes from Will Deacon:
 "It's a little busier than normal, but it's still not a lot of code and
  things seem fairly quiet in general:

   - Fix allocation failure during SVE coredumps

   - Fix handling of SVE context on signal delivery

   - Enable Neoverse N2 CPU errata workarounds for Microsoft's "Azure
     Cobalt 100" clone

   - Work around CMN PMU erratum in AmpereOneX implementation

   - Fix typo in CXL PMU event definition

   - Fix jump label asm constraints"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/sve: Lower the maximum allocation for the SVE ptrace regset
  arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata
  perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect child count)
  arm64: jump_label: use constraints "Si" instead of "i"
  arm64: fix typo in comments
  perf: CXL: fix mismatched cpmu event opcode
  arm64/signal: Don't assume that TIF_SVE means we saved SVE state

Pull zonefs fix from Damien Le Moal:

 - Fix direct write error handling to avoid a race between failed IO
   completion and the submission path itself which can result in an
   invalid file size exposed to the user after the failed IO.

* tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Improve error handling

Merge tag 'kvmarm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.8, take #2

- Avoid dropping the page refcount twice when freeing an unlinked
  page-table subtree.

Merge tag 'kvmarm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.8, take #1

- Don't source the VFIO Kconfig twice

- Fix protected-mode locking order between kvm and vcpus

Pull sound fixes from Takashi Iwai:
 "A collection of device-specific fixes. It became a bit bigger than
  wished, but all look reasonably small and safe to apply.

   - A few Cirrus Logic CS35L56 and CS42L43 driver fixes

   - ASoC SOF fixes and workarounds

   - Various ASoC Intel fixes

   - Lots of HD-, USB-audio and AMD ACP quirks"

* tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
  ALSA: usb-audio: More relaxed check of MIDI jack names
  ALSA: hda/realtek: fix mute/micmute LED For HP mt645
  ALSA: hda/realtek: cs35l41: Fix order and duplicates in quirks table
  ALSA: hda/realtek: cs35l41: Fix device ID / model name
  ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS UM3402 with missing DSD
  ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios property
  ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk
  ASoC: SOF: IPC3: fix message bounds on ipc ops
  ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
  ASoC: q6dsp: fix event handler prototype
  ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg
  ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
  ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
  ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8
  ASoC: rt5645: Make LattePanda board DMI match more precise
  ASoC: SOF: amd: Fix locking in ACP IRQ handler
  ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
  ASoC: Intel: cht_bsw_rt5645: Cleanup codec_name handling
  ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards
  ASoC: cs35l56: Remove default from IRQ1_CFG register
  ...

Pull gpio fixes from Bartosz Golaszewski:

 - add missing stubs for functions that are not built with GPIOLIB
   disabled

* tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: add gpio_device_get_label() stub for !GPIOLIB
  gpiolib: add gpio_device_get_base() stub for !GPIOLIB
  gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB

Pull drm fixes from Dave Airlie:
 "Regular weekly fixes, nothing too major, mostly amdgpu, then i915, xe,
  msm and nouveau with some scattered bits elsewhere.

  crtc:
   - fix uninit variable

  prime:
   - support > 4GB page arrays

  buddy:
   - fix error handling in allocations

  i915:
   - fix blankscreen on JSL chromebooks
   - stable fix to limit DP sst link rates

  xe:
   - Fix an out-of-bounds shift.
   - Fix the display code thinking xe uses shmem
   - Fix a warning about index out-of-bound
   - Fix a clang-16 compilation warning

  amdgpu:
   - PSR fixes
   - Suspend/resume fixes
   - Link training fix
   - Aspect ratio fix
   - DCN 3.5 fixes
   - VCN 4.x fix
   - GFX 11 fix
   - Misc display fixes
   - Misc small fixes

  amdkfd:
   - Cache size reporting fix
   - SIMD distribution fix

  msm:
   - GPU:
   - dmabuf vmap fix
   - a610 UBWC corruption fix (incorrect hbb)
   - revert a commit that was making GPU recovery unreliable
   - tlb invalidation fix

  ivpu:
   - suspend/resume fix

  nouveau:
   - fix scheduler cleanup path
   - fix pointless scheduler creation
   - fix kvalloc argument order

  rockchip:
   - vop2 locking fix"

* tag 'drm-fixes-2024-02-16' of git://anongit.freedesktop.org/drm/drm: (38 commits)
  drm/amdgpu: Fix implicit assumtion in gfx11 debug flags
  drm/amdkfd: update SIMD distribution algo for GFXIP 9.4.2 onwards
  drm/amd/display: Increase ips2_eval delay for DCN35
  drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current()
  drm/amdgpu/soc21: update VCN 4 max HEVC encoding resolution
  drm/amd/display: fixed integer types and null check locations
  drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr
  drm/amd/display: Preserve original aspect ratio in create stream
  drm/amd/display: Fix possible NULL dereference on device remove/driver unload
  Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"
  drm/amd/display: Add align done check
  Revert "drm/amd: flush any delayed gfxoff on suspend entry"
  drm/amd: Stop evicting resources on APUs in suspend
  drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()'
  drm/amd/display: Fix possible use of uninitialized 'max_chunks_fbc_mode' in 'calculate_bandwidth()'
  drm/amd/display: Initialize 'wait_time_microsec' variable in link_dp_training_dpia.c
  drm/amd/display: Fix && vs || typos
  drm/amdkfd: Fix L2 cache size reporting in GFX9.4.3
  drm/amdgpu: make damage clips support configurable
  drm/msm: Wire up tlb ops
  ...

Pull lsm fix from Paul Moore:
 "One small LSM patch to fix a potential integer overflow in the newly
  added lsm_set_self_attr() syscall"

* tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix integer overflow in lsm_set_self_attr() syscall