- 31 Jul, 2017 1 commit
-
-
Arnd Bergmann authored
I ran into this build error on linux-next: drivers/infiniband/hw/hns/hns_roce_eq.c:477:8: error: unknown type name 'irqreturn_t' static irqreturn_t hns_roce_msi_x_interrupt(int irq, void *eq_ptr) ^~~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_eq.c: In function 'hns_roce_msi_x_interrupt': drivers/infiniband/hw/hns/hns_roce_eq.c:485:9: error: implicit declaration of function 'IRQ_RETVAL'; did you mean 'BPF_RVAL'? [-Werror=implicit-function-declaration] return IRQ_RETVAL(int_work); I have bisected this to a seemingly unrelated change that happened to remove some indirect header inclusions. Simply including the required header explicitly fixes the build failure. Fixes: 09c75704 ("xfrm: remove flow cache") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
- 28 Jul, 2017 6 commits
-
-
Doug Ledford authored
The 0day build system flags implicit includes as errors. A patch from Matan Barak to allow hns_roce, an aarch64 specific RDMA driver, to be built on other arches, but it resulted in build regressions. The problem is that hns_roce_device.h needs a definition for __raw_writeq but did not have an include to provide it. Add <linux/io.h> as an include to resolve the issue. Signed-off-by: -
kbuild test robot authored
drivers/infiniband/hw/hns/hns_roce_eq.c:295:3-4: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver") CC: Matan Barak <matanb@mellanox.com> Signed-off-by:Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
kbuild test robot authored
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:2026:5-8: Unneeded variable: "ret". Return "0" on line 2046 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver") CC: Matan Barak <matanb@mellanox.com> Signed-off-by: -
kbuild test robot authored
drivers/infiniband/hw/hns/hns_roce_qp.c:802:9-10: WARNING: return of 0/1 in function 'hns_roce_wq_overflow' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver") CC: Matan Barak <matanb@mellanox.com> Signed-off-by: -
Matan Barak authored
Compiling the hns RoCE driver requires ARM architecture. In order to simplify development of IB/core, support compile test. Add the necessary includes for that too. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Doug Ledford authored
The initial patch for changing the stack to use RoCEv2 GIDs by default set the CMA_PREFERRED_ROCE_GID_TYPE to an incorrect value. Instead of an absolute value, we needed to set the right bit in a bitmask. Correct the default setting so we use RoCEv2 by default. Fixes: 63a5f483 (IB/cma: Set default gid type to RoCEv2) Signed-off-by:
-
- 27 Jul, 2017 4 commits
-
-
Doug Ledford authored
-
Amrani, Ram authored
The number of supported WIDs, if they are supported at all, can be limited due to resources. Notifying the user space application the number of available WIDs allows it to utilize them correctly. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
-
Amrani, Ram authored
Direct Packet Mode support may be disabled, e.g, due to limited resources. Notifying the user application prevents wasting cycles on attempting to send these kind of packets. Signed-off-by:
-
Doug Ledford authored
-
- 24 Jul, 2017 29 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in mlx5_ib_dbg message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Kaike Wan authored
This patch adds qp->s_ack_queue indices and size to qp_stats printout. This information will provide information about the receiving side. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Guy Levi authored
As a final step to support RSS feature, expose the RSS capabilities in query device verb. It includes: - Max rwq indirection tables. - Max rwq indirection table size. - Supported qp types. Signed-off-by:
Guy Levi <guyle@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Guy Levi authored
Add support to work with a RSS QP by using an indirection table object upon QP creation. Other related QP verbs (e.g. modify/destroy/query) were updated as well for that QP mode. Notes: - The RX hash properties are supplied as driver private data. - The RSS QP port is used on the associated WQs in its indirection table. Applying different ports during WQ life time is not allowed. - The expected RSS QP flow is: create, modify(RST->INIT), modify(RST->RTR), destroy. Signed-off-by:
-
Guy Levi authored
To enable RSS functionality the IB indirection table object (i.e. ib_rwq_ind_table) should be used. This patch implements the related verbs as of create and destroy an indirection table. In downstream patches the indirection table will be used as part of RSS QP creation. Signed-off-by:
-
Guy Levi authored
Support create/modify/destroy WQ related verbs. The base IB object to enable RSS functionality is a WQ (i.e. ib_wq). This patch implements the related WQ verbs as of create, modify and destroy. In downstream patches the WQ will be used as part of an indirection table (i.e. ib_rwq_ind_table) to enable RSS QP creation. Notes: ConnectX-3 hardware requires consecutive WQNs list as receive descriptor queues for the RSS QP. Hence, the driver manages consecutive ranges lists per context which the user must respect. Destroying the WQ does not return its WQN back to its range for reusing. However, destroying all WQs from the same range releases the range and in turn releases its WQNs for reusing. Since the WQ object is not a natural object in the hardware, the driver implements the WQ by the hardware QP. As such, the WQ inherits its port from its RSS QP parent upon its RST->INIT transition and by that time its state is applied to the hardware. Signed-off-by:
-
Moshe Shemesh authored
Adding visibility of resource usage of QPs, CQs and counters used by virtual functions. This feature will be used to give the PF administrator more data while debugging VF status. Usage info was added to ALLOC_RES command, to notify the PF if the resource which is being reserved or allocated for the VF will be used by kernel driver or by user verbs. Updated reservation and allocation functions of QP, CQ and counter with additional usage parameter. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
When inline-receive is enabled, the HCA may write received data into the receive WQE. Inline-receive is enabled by setting its matching bit in the QP context and each single-packet message with payload not exceeding the receive WQE size will be delivered to the WQE. The completion report will indicate that the payload was placed to the WQE. It includes: 1) Return maximum supported size of inline-receive by the hardware in query_device vendor's data part. 2) Enable the feature when requested by the vendor data input. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
-
Parav Pandit authored
This patch adds below requester and responder side error counters, which will be exposed by hardware counters interface and are supported as part of query Q counters command extension. +---------------------------+-------------------------------------+ | Name | Description | |---------------------------+-------------------------------------| |resp_local_length_error | Number of times responder detected | | | local length errors | |---------------------------+-------------------------------------| |resp_cqe_error | Number of CQEs completed with error | | | at responder | |---------------------------+-------------------------------------| |req_cqe_error | Number of CQEs completed with error | | | at requester | |---------------------------+-------------------------------------| |req_remote_invalid_request | Number of times requester detected | | | remote invalid request error | |---------------------------+-------------------------------------| |req_remote_access_error | Number of times requester detected | | | remote access error | |---------------------------+-------------------------------------| |resp_remote_access_error | Number of times responder detected | | | remote access error | |---------------------------+-------------------------------------| |resp_cqe_flush_error | Number of CQEs completed with | | | flushed with error at responder | |---------------------------+-------------------------------------| |req_cqe_flush_error | Number of CQEs completed with | | | flushed with error at requester | +---------------------------+-------------------------------------+ Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
The extended address vector is the highest bit in be32 variable, but it was compared with the lowest. This patch fixes the endianness of that check and removes already declared define. Fixes: 17d2f88f ("IB/mlx5: Add ODP atomics support") Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Majd Dibbiny authored
When we have a miss in one order of the mkey cache, we try to get an mkey from a higher order. We still need to check that the higher order can be used with UMR before using it. Otherwise, we will get an mkey with 0 entries and the post send operation that is used to fill it will complete with the following error: mlx5_0:dump_cqe:275:(pid 0): dump error cqe 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0f007806 25000025 49ce59d2 Fixes: 49780d42 ("IB/mlx5: Expose MR cache for mlx5_ib") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Report RX checksum capabilities when 'ipoib_enhanced_offloads' capabilities are set and support checksum. Signed-off-by:
-
Yishai Hadas authored
Report 'ipoib_enhanced_offloads' capabilities from the core layer, it will be used in the next patch from this series. Signed-off-by:
-
Yishai Hadas authored
In order to add multicast flow steering support, there is need to block the attaching of mcg flow for underlay QP, recognize multicast IB_FLOW_SPEC_IPV4 based on its IP and enable creating/destroying flow for IB layer. Signed-off-by:
-
Yishai Hadas authored
Allow user space applications to accelerate send and receive traffic which is typically handled by IPoIB ULP by creating a UD QP with a given source QPN of the IPoIB UD QP. UD QP with a given source QPN should basically be similar to RAW QP from point of view of its created resources. However, - Its TIS should point to the source QPN. - Modify can be done only on its state as the transport attributes are managed by its source QP. This patch manages below: - Creating/destroying/modifying UD QP with a given source QPN. Signed-off-by:
-
Yishai Hadas authored
Enable QP creation with a given source QP number, the created QP will use the source QPN as its wire QP number. To create such a QP, root privileges (i.e. CAP_NET_RAW) are required from the user application. This comes as a pre-patch for downstream patches in this series to allow user space applications to accelerate traffic which is typically handled by IPoIB ULP. Signed-off-by:
-
Yishai Hadas authored
Enable QP creation with a given source QP number. The created QP will use the source QPN as its wire QP number. This comes as a pre-patch for downstream patches in this series to allow user space applications to accelerate traffic which is typically handled by IPoIB ULP. Signed-off-by:
-
Noa Osherovich authored
When creating address handle from multicast GID, set MAC according to the appropriate formula instead of searching for it in the GID table: - For IPv4 multicast GID use ip_eth_mc_map(). - For IPv6 multicast GID use ipv6_eth_mc_map(). Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Noa Osherovich authored
RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding IPv4 address is encoded into the GID according to the following rule: GID= :ffff:<IPv4 address> Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it zeroed and change rdma_is_multicast_addr() to consider the new logic. Signed-off-by:
-
Noa Osherovich authored
RoCE Annex (A16.9.10/11) declares that during attach (detach) QP to a multicast group, if the QP is associated with a RoCE port, the multicast group MLID is unused and is ignored. During attach or detach multicast, when the QP is associated with a port, it is enough to check the port's link layer and validate the LID only if it is Infiniband. Otherwise, avoid validating the multicast LID. Fixes: 8561eae6 ("IB/core: For multicast functions, verify that LIDs are multicast LIDs") Signed-off-by:
-
Maor Gottlieb authored
Add debugfs interface for monitor the number of delay drop timeout events and the number of existing dropless RQs in the system. In addition add debugfs interface for configuring the global timeout value which is used in the SET_DELAY_DROP command. Signed-off-by:
-
Maor Gottlieb authored
RQs that were configured for "delay drop" will prevent packet drops when their WQEs are depleted. Marking an RQ to be drop-less is done by setting delay_drop_en in RQ context using CREATE_RQ command. Since this feature is globally activated/deactivated by using the SET_DELAY_DROP command on all the marked RQs, we activated/deactivated it according to the number of RQs with 'delay_drop' enabled. When timeout is expired, then the feature is deactivated. Therefore the driver handles the delay drop timeout event and reactivate it. Signed-off-by:
-
Maor Gottlieb authored
When delay drop timeout is expired, the firmware raises general notification event of DELAY_DROP_TIMEOUT subtype. In addition the feature is disable so the driver have to reactivate the timeout. Signed-off-by:
-
Maor Gottlieb authored
Add support to SET_DELAY_DROP command. This command will be used in downstream patches for delay packet drop. The timeout value should be indicated by delay_drop_timeout field. Packet processing will be delayed till timeout value passed or until more WQEs are posted. Setting this value to 0 disables the feature. Signed-off-by:
-
Maor Gottlieb authored
Work queue which is created with IB_WQ_FLAGS_DELAY_DROP won't cause packet drops when there aren't receive WQEs, but will wait until posting of receive WQEs or for some period of time that the device was configured with. It includes: * Add a new creation flag to enable delay drop functionality in a WQ. * A new capability was introduced - IB_RAW_PACKET_CAP_DELAY_DROP, which is the device's ability to delay packet drops when there aren't receive WQEs. Signed-off-by:
-
Bodong Wang authored
When a user sets port_guid, node_guid or policy of an IB virtual function, save this information in "struct mlx5_vf_context". This information will be restored later when pci_resume is called. To make sure this works, one can use aer-inject to generate PCI errors on mlx5 devices and verify if relevant fields are restored after PCI resume. Signed-off-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
-
Parav Pandit authored
This patch adds debug control parameters for congestion control which can be read or written through debugfs. They are for reaction point and notification point nodes. These control parameters are as below: +------------------------------+-----------------------------------------+ | Name | Description | |------------------------------+-----------------------------------------| |rp_clamp_tgt_rate | When set target rate is updated to | | | current rate | |------------------------------+-----------------------------------------| |rp_clamp_tgt_rate_ati | When set update target rate based on | | | timer as well | |------------------------------+-----------------------------------------| |rp_time_reset | time between rate increase if no | | | CNP is received unit in usec | |------------------------------+-----------------------------------------| |rp_byte_reset | Number of bytes between rate inease if | | | no CNP is received | |------------------------------+-----------------------------------------| |rp_threshold | Threshold for reaction point rate | | | control | |------------------------------+-----------------------------------------| |rp_ai_rate | Rate for target rate, unit in Mbps | |------------------------------+-----------------------------------------| |rp_hai_rate | Rate for hyper increase state | | | unit in Mbps | |------------------------------+-----------------------------------------| |rp_min_dec_fac | Minimum factor by which the current | | | transmit rate can be changed when | | | processing a CNP, unit is percerntage | |------------------------------+-----------------------------------------| |rp_min_rate | Minimum value for rate limit, | | | unit in Mbps | |------------------------------+-----------------------------------------| |rp_rate_to_set_on_first_cnp | Rate that is set when first CNP is | | | received, unit is Mbps | |------------------------------+-----------------------------------------| |rp_dce_tcp_g | Used to calculate alpha | |------------------------------+-----------------------------------------| |rp_dce_tcp_rtt | Time between updates of alpha value, | | | unit is usec | |------------------------------+-----------------------------------------| |rp_rate_reduce_monitor_period | Minimum time between consecutive rate | | | reductions | |------------------------------+-----------------------------------------| |rp_initial_alpha_value | Initial value of alpha | |------------------------------+-----------------------------------------| |rp_gd | When CNP is received, flow rate is | | | reduced based on gd, rp_gd is given as | | | log2(rp_gd) | |------------------------------+-----------------------------------------| |np_cnp_dscp | dscp code point for generated cnp | |------------------------------+-----------------------------------------| |np_cnp_prio_mode | 802.1p priority for generated cnp | |------------------------------+-----------------------------------------| |np_cnp_prio | cnp priority mode | +------------------------------+-----------------------------------------+ Signed-off-by:
-
Moni Shoua authored
The old logic ignored link state. This led to missing IB events like when link goes down on the switch while admin state is up or to redundant events like when admin state goes up while link is down. To fix that, probe the port state on NETDEV events and compare to last known state to decide if IB events needs to be dispatched. FIxes: 5ec8c83e ("IB/mlx5: Port events in RoCE now rely on netdev events") Signed-off-by:
-
Huy Nguyen authored
Before running the ethtool's loopback selftest, we need to make sure that the local loopback is enabled. Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
-
