Add the missing down/up of the semaphore to prevent other commands
from being issued to the usb device while the pwn is being stopped.

Rename the local variable used for the private data pointer to the
comedi "norm".

Make sure to check that usbdux_pwm_stop() was successful before
sending command to the usb device to stop the pwm.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, pass the comedi_device pointer to this function
instead of the private data pointer. Rename the local variable used
for the private data pointer to the comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comedi (*insn_write) operations are supposed to write insn->n values.
Fix this function to work like the core expects.

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comedi (*insn_read) operations are supposed to read and return insn->n
values. Fix this function to work like the core expects.

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Tidy up the exit path using goto to ensure that the semaphore is
released.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Tidy up the exit path using goto to ensure that the semaphore is
released.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up this function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Make sure an ao command is not already running and return -EBUSY.

Tidy up the exit path using goto to ensure that the semaphore is
released.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Tidy up the exit path using goto to ensure that the semaphore is
released.

Return -EBUSY instead if an ao command is already running.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Tidy up the exit path using goto to ensure that the semaphore is
released.

Return -EBUSY instead of 0 if the (*insn_write) cannot be done because
a command is running.

Tidy up the for() loop that writes the data. The dux_commands[1] and [4]
can be set outside the loop since they are constant. Use a local pointer
for dux_commands[2] to load the value to write. Only the last value needs
to be cached in the private data for read back.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_range_is_bipolar() helper instead of checking the
'range' index against a magic number.

Also, use the s->maxdata to calculate the value needed to munge the
value for bipolar data instead of the magic number.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Tidy up the exit path using goto to ensure that the semaphore is
released.

Return -EBUSY instead of 0 if the (*insn_read) cannot be done because
a command is running.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Tidy up the exit path using goto to ensure that the semaphore is
released.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Tidy up the exit path using goto to ensure that the semaphore is
released.

Return -EBUSY if an ai command is already running.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As pointed out by Ian Abbott, the *_cmd_running flags should be set
before submitting the urbs. There is a possible race condition where
an urb could complete and the flag is checked in the completion
routine before it's set.
Reported-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A spin lock is taken here so we should use GFP_ATOMIC.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to
be built, which handles various National Instruments ISA-PNP data
acquisition cards.  The configuration option currently depends on
ISAPNP.

The "ni_atmio" module is a "legacy" comedi driver with no
auto-configuration support and it doesn't register as a PNP card driver.
The only difference in initialization from the other comedi ISA card
drivers is that it will use the ISA-PNP functions to find, attach and
activate the card if no I/O base address has been specified by the user
in the COMEDI_DEVCONFIG ioctl.

The module compiles fine without the ISAPNP configuration option as the
<linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline
functions if the ISAPNP and PNP options, respectively, are not enabled.

Remove the dependancy on the ISAPNP option since the module builds
without it and can be used without it.

(There is a very slim chance that comedi will support proper ISA PNP
drivers one day, in which case the ni_atmio driver could be converted to
use this support and not support manual configuration.  However, not all
the PnP IDs of boards supported by this driver are currently known to
us.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The COMEDI_NI_ATMIO16D configuration option causes the "ni_atmio16d"
module to be built, which handles the National Instruments AT-MIO-16 and
AT-MIO-16D cards.  The configuration option currently depends on ISAPNP,
but the module doesn't use any ISAPNP functions and the cards are legacy
ISA cards with base I/O port, IRQ and DMA channel configured by jumpers.
(The driver doesn't use DMA though.)

Remove the ISADNP dependancy from COMEDI_NI_ATMIO16D and fix up the help
text - the card names are missing a dash and they're not ISA-PNP.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Resolves warnings from the "sparse" checker of the form "warning: cast to
restricted __le??".
Signed-off-by: Shaun Laing <shaun@xresource.ca>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As reported, this driver causes problems when built into the kernel, so
force it to be a module until those issues are fixed.

Also delete the "default n" lines in the Kconfig, as they are not
needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the driver for Xillybus, which is a general-purpose interface for
data communication with FPGAs (programmable logic). Please refer to the
README included in this patch for a detailed explanation.

It was previously submitted for misc-devices, but it appears like noone's
willing to review the code (which I can understand, given its magnitude).
Hence submitted as a staging driver.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes coding style issues reported by Dan here:-
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2012-June/027767.htmlReported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DBG_PORT80 is always defined as empty macro
because VIAWET_DEBUG is never defined. Remove
it and VIAWET_DEBUG.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASSERT is always defined as empty macro
because VIAWET_DEBUG is never defined.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Greg spotted that said driver is not subscribing to the automagic
mechanism of auto-loading if a user tries to open /dev/zram.

This fixes it.

CC: Minchan Kim <minchan@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The resolution of msleep is related to HZ, so with HZ set to
100 any msleep of less then 10ms will become ~10ms. This is
not what we want. Use usleep_range to get more control of
what is happening here.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There was some code that cleared the dma_mask when dma was disabled in
the driver. Given that clearing the mask doesn't actually tell the usb
core we're not using dma, and a previous commit explicitely sets the
hcd->self.uses_dma value, it seems these values are unneeded and can
only potentially cause problems (when reloading a module, for example).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This thing seems to do some kind of delayed setup. Really, real kms
drivers shouldn't do that at all. Either stuff needs to be dynamically
hotplugged or the driver setup sequence needs to be fixed.

This patch here just moves the setup at the very end of the driver
load callback, with the locking adjusted accordingly.

v2: Also move the corresponding put from ->lastclose to ->unload.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add MODULE_ALIAS, so that auto module loading can work.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of jumping to goto labels, just return the error code directly.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As devm_ioremap_resource() is used on probe, there is no need to explicitly
check the return value from platform_get_resource(), as this is something that
devm_ioremap_resource() takes care by itself.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LVDS Display Bridge is currently supported, so remove it from the missing
features list.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following sparse warnings:

drivers/staging/imx-drm/imx-tve.c:133:13: warning: context imbalance in 'tve_lock' - wrong count at exit
drivers/staging/imx-drm/imx-tve.c:139:13: warning: context imbalance in 'tve_unlock' - unexpected unlock
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IPUv3 has a total of 3 flows (one synchronous flow and 2 asynchronous flows).

Let's add a definition for such number in order to let the code easier to
understand.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to have braces for a single line 'if' block
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devm_kzalloc() may fail, so let's check its return value.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When building imx_v6_v7_defconfig with imx-drm drivers selected as modules, we
get the following build error:

ERROR: "imx_drm_encoder_get_mux_id" [drivers/staging/imx-drm/imx-ldb.ko] undefined!

Export the required function to avoid this problem.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64 allmodconfig:

drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_auto_attach':
drivers/staging/comedi/drivers/addi_apci_2032.c:328:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/addi_apci_2032.c:328:11: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_detach':
drivers/staging/comedi/drivers/addi_apci_2032.c:350:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_attach_common':
drivers/staging/comedi/drivers/amplc_pci224.c:1289:2: error: implicit declaration of function 'kmalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/amplc_pci224.c:1289:23: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1296:24: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1303:25: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1348:42: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_detach':
drivers/staging/comedi/drivers/amplc_pci224.c:1474:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

Introduced by commit 0bdab509 ("staging:
comedi: use comedi_alloc_devpriv()"), which removed some inclusions of
<linux/slab.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>