- 24 Apr, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Merge "Samsung Device Tree updates and improvements for v4.7" from Krzysztof Kozlowski: 1. Enable accelerated AES (Security SubSystem) on Exynos4412-based boards. 2. Enable HDMI CEC on Exynos4412-based Odroid. 3. Add regulator supplies for eMMC/SD on Odroid XU3/XU4. 4. Fix DTC unit name warnings. 5. Merge topic branch of new Artik5 board. * tag 'samsung-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5p: Fix DTC unit name warnings in SMDKv210 board ARM: dts: exynos: Fix DTC unit name warnings in Exynos5440 ARM: dts: exynos: Fix DTC unit name warnings in SMDK5420 ARM: dts: exynos: Fix DTC unit name warnings in Peach Pit ARM: dts: exynos: Fix DTC unit name warnings in Exynos542x ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250 ARM: dts: exynos: Fix DTC unit name warnings in Exynos4x12 ARM: dts: exynos: Fix DTC unit name warnings in Trats2 board ARM: dts: exynos: Fix DTC unit name warnings in Exynos4 ARM: dts: exynos: Fix DTC unit name warnings in Exynos3250 ARM: dts: exynos: Fix DTC unit name warnings in cros-adc-thermistors ARM: dts: exynos: Add eMMC and SD regulator supplies to Odroid XU3/XU4 ARM: dts: exynos: Enable the HDMI CEC device on Exynos4412 Odroid boards ARM: dts: exynos: Add node for the HDMI CEC device to exynos4 ARM: dts: exynos: Add HDMI CEC pin definition to exynos4 pinctrl ARM: dts: exynos: Enable SSS on Odroid X/X2/U3 family ARM: dts: exynos: Enable SSS on Trats2 ARM: dts: exynos: Add Security SubSystem node to Exynos4
-
Arnd Bergmann authored
Merge tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Merge "Topic branch for Device Tree changes for Exynos 3250 for v4.7" from Krzysztof Kozlowski: Merge necessary new clocks from Sylwester (used by new board) and add support for Exynos3250-based Artik5 board. * tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add MSHC2 DT node for SD card for exynos3250-artik5-eval board ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module ARM: dts: exynos: Add MSHC2 DT node for Exynos3250 SoC ARM: dts: exynos: Add UART2 DT node for Exynos3250 SoC ARM: dts: exynos: Add initial gpio setting of MMC2 device for exynos3250-monk ARM: dts: exynos: Add initial pin configuration for exynos3250-rinato clk: samsung: exynos3250: Add MMC2 clock clk: samsung: exynos3250: Add UART2 clock dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250
-
- 13 Apr, 2016 20 commits
-
-
Olof Johansson authored
Merge tag 'v4.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt A lot display-controller nodes for DSI and the Analogix DP on rk3288 as well as general display+hdmi support on rk3036. With the Analogix DP support, Veyron Chromeboks can now finally use their internal display. Other than this big improvement we have thermal support on the rk3228, a long time missing binding document for the General Register Files block, better operating points for Veyron devices and a bunch of fixes with parts stemming from warnings that new dtc version can generate. * tag 'v4.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits) ARM: dts: rockchip: move rk3036 memory definition to board files ARM: dts: rockchip: enable the eDP on rk3288 veyron devices ARM: dts: rockchip: simple panel and backlight supplies on veyron boards ARM: dts: rockchip: override edp hpd handling on veyron-pinky and speedy ARM: dts: rockchip: add rk3288-veyron-minnie backlight and panel settings ARM: dts: rockchip: add rk3288-veyron-jaq backlight and panel overrides ARM: dts: rockchip: add core rk3288-veyron backlight and panel nodes ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators ARM: dts: rockchip: move edp-hpd pin definition into common location ARM: dts: rockchip: add rk3288 displayport controller node ARM: dts: rockchip: add rk3288 edp-phy node ARM: dts: rockchip: add missing unitname to cpu_leakage efuse ARM: dts: rockchip: drop unneeded properties from mipi node ARM: dts: rockchip: clean up gpio-keys nodes ARM: dts: rockchip: fix missing usbphy unit-names ARM: dts: rockchip: fix rk3288 power-domain unit names ARM: dts: rockchip: update rk3288-veyron cpu operating points ARM: dts: rockchip: remove broken-cd from emmc and sdio ARM: dts: rockchip: enable the tsadc for rk3228 evb ARM: dts: rockchip: add the thermal main info found on rk3228 ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'socfpga_dts_for_v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v4.7 - Update SD/MMC node for Arria10 - Update Arria10 with clock and interrupt fields for DMA - Remove 'phy-addr' from stmmac node - Remove ethernet node from Cyclone5 DTSI - Add LEDs/KEYs/SWs support on Sockit - Add L2 and OCRAM EDAC dts entries - Add reset control for USB * tag 'socfpga_dts_for_v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: add reset control for USB ARM: dts: socfpga: Add Altera Arria10 OCRAM EDAC devicetree entry ARM: dts: socfpga: Add Altera Arria10 L2 Cache EDAC devicetree entry ARM: dts: socfpga: Add support for HPS KEYs/SWs on SoCKit ARM: dts: socfpga: Add support for HPS LEDs on SoCKit ARM: dts: socfpga: Drop gmac0 from CV dtsi ARM: dts: socfpga: Drop phy-addr OF property from CV dtsi ARM: dts: socfpga: Add missing clock and interrupt fields for Arria10 DMA ARM: dts: socfpga: add the clk-phase property for sd/mmc clock ARM: dts: socfpga: add cap-sd-highspeed for SD/MMC node Signed-off-by: Olof Johansson <olof@lixom.net>
-
https://github.com/manabian/linux-lpcOlof Johansson authored
Device Tree additions for LPC18xx platform - CREG clock controller - Real Time Clock (RTC) - Analog peripherals (ADC/DAC) - Warning fixes for the new dtc compiler With the CREG clock controller in place it is now possible to enable the internal RTC on LPC18xx/43xx platforms. The analog peripherals (ADC/DAC) has also been added here and enabled on both the EA4357 dev kit and Hitex eval board. In addition to the new entries there are a fixes for the DT warnings generated by the new dtc. * tag 'lpc18xx_dts_for_4.7' of https://github.com/manabian/linux-lpc: dt-bindings: phy-lpc18xx-usb-otg: remove unit address from binding ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc ARM: dts: lpc4357-ea4357: fix unit name warnings from dtc ARM: dts: lpc18xx: remove unit addresses from creg childs ARM: dts: armv7-m: add unit name to interrupt-controller ARM: dts: lpc4350-hitex-eval: add adc1 ARM: dts: lpc4357-ea4357: add dac ARM: dts: lpc4357-ea4357: add adc0 ARM: dts: lpc18xx: add dac node ARM: dts: lpc18xx: add adc nodes ARM: dts: lpc18xx: add rtc node ARM: dts: lpc18xx: add creg-clk node Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'versatile-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt Versatile DTS changes, baseline for the v4.7 series: - Add CLCD panel nodes to PB1176 and PB11MPCore - Add a DT binding blurb for the Versatile IB2 syscon - Add DTS files for the (QEMU supported) RealView EB boards in all variants. - Add DTS files for the (QEMU supported) RealView PBA8 and PBX-A9 board variants. * tag 'versatile-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: realview: DT support for the PBA8 and PBX-A9 ARM: dts: realview: support all the RealView EB board variants ARM: dts: realview: PB1176: define a standard VGA panel ARM: dts: realview: PB11MPCore: define a standard VGA panel Documentation/DT: add blurb for IB2 syscon to Versatile Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC Cleanup for v4.7 * Remove unnecessary clock-output-names properties from DT * Use generic pinctrl properties in DT * tag 'renesas-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits) ARM: dts: sh73a0: Remove unnecessary clock-output-names properties ARM: dts: r8a73a4: Remove unnecessary clock-output-names properties ARM: dts: lager: Remove unnecessary clock-output-names properties ARM: dts: porter: Remove unnecessary clock-output-names properties ARM: dts: koelsch: Remove unnecessary clock-output-names properties ARM: dts: gose: Remove unnecessary clock-output-names properties ARM: dts: r8a7794: Remove unnecessary clock-output-names properties ARM: dts: r8a7793: Remove unnecessary clock-output-names properties ARM: dts: r8a7791: Remove unnecessary clock-output-names properties ARM: dts: r8a7779: Remove unnecessary clock-output-names properties ARM: dts: r8a7778: Remove unnecessary clock-output-names properties ARM: dts: r8a7740: Remove unnecessary clock-output-names properties ARM: dts: r7s72100: Remove unnecessary clock-output-names properties ARM: dts: r8a7790: Remove unnecessary clock-output-names properties ARM: dts: kzm9d: use generic pinctrl properties ARM: dts: kzm9g: use generic pinctrl properties ARM: dts: silk: use generic pinctrl properties ARM: dts: alt: use generic pinctrl properties ARM: dts: gose: use generic pinctrl properties ARM: dts: porter: use generic pinctrl properties ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-arm64-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM64 Based SoC DT Updates for v4.7 * Use USB3.0 fallback compatibility string in DT for r8a7795 SoC * Add CAN support to DT for r8a7795 SoC * tag 'renesas-arm64-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7795: Use USB3.0 fallback compatibility string arm64: dts: r8a7795: Add CAN support arm64: dts: r8a7795: Add CAN external clock support Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91Olof Johansson authored
First DT batch for 4.7, additions for sama5d2 SoC: - chipid node to identify the SoC - SFR node (Special Function Registers) - LCD controller's node * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d2: add LCD controller ARM: dts: at91: sama5d2: add chipid node ARM: dts: at91: sama5d2: add SFR node Signed-off-by: Olof Johansson <olof@lixom.net>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in SMDKv210 board: Warning (unit_address_vs_reg): Node /soc/fimd@f8000000/display-timings/timing@0 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in Exynos5440 boards: Warning (unit_address_vs_reg): Node /pinctrl has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /rtc has a reg or ranges property, but no unit name Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in Exynos5420 SMDK5420: Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in Exynos5420 Peach Pit: Warning (unit_address_vs_reg): Node /dp-controller@145B0000/ports/port@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@48/ports/port@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@48/ports/port@1 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in all Exynos542x/5800 boards: Warning (unit_address_vs_reg): Node /video-phy@10040728 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /video-phy@10040714 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /usb@12400000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /usb@12400000/dwc3 has a reg or ranges property, but no unit name Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in all Exynos5250 boards: Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /hdmi has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /mixer has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /video-phy@10040720 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /fixed-regulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /fixed-regulator@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /fixed-regulator@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@12C70000/trackpad has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/embedded-controller has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/power-regulator has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /i2c@12CA0000/embedded-controller has a reg or ranges property, but no unit name Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in Exynos4x12 boards: Warning (unit_address_vs_reg): Node /camera/fimc-is@12000000/pmu has a reg or ranges property, but no unit name Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in Trats2 board: Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@66/regulators/ESAFEOUT1@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@66/regulators/ESAFEOUT2@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@66/regulators/CHARGER@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /thermistor-ap@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /thermistor-battery@1 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in all Exynos4 boards: Warning (unit_address_vs_reg): Node /soc/video-phy@10020710 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in Exynos3250 boards: Warning (unit_address_vs_reg): Node /soc/video-phy@10020710 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Krzysztof Kozlowski authored
Fix following DTC warnings in cros-adc-thermistors: Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@6 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Markus Reichl authored
Add vmmc and vqmmc supplies from MF circuit sheets for eMMC and SD on odroid XU3 and XU4 to avoid warnings: dwmmc_exynos 12200000.mmc: Looking up vmmc-supply property in node /mmc@12200000 failed Also remove their always_on properties so the regulators could be disabled when not used. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
-
Krzysztof Kozlowski authored
Topic branch for Device Tree changes for Exynos 3250 for v4.7: Merge necessary new clocks from Sylwester (used by new board) and add support for Exynos3250-based Artik5 board.
-
- 11 Apr, 2016 14 commits
-
-
Dinh Nguyen authored
Add the resets property for the 2 USB controllers. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Thor Thayer authored
Add the device tree entries needed to support the Altera On-Chip RAM EDAC on the Arria10 chip. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Thor Thayer authored
Add the device tree entries needed to support the Altera L2 cache EDAC on the Arria10 chip. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Marek Vasut authored
Add support for the keys and flip-switches on the SoCFPGA SoCkit board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Marek Vasut authored
Add support for the blue LEDs on the SoCFPGA SoCkit board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Marek Vasut authored
The socfpga_cyclone5.dtsi is included by all DTS files which describe boards using the Cyclone V SoC. The Cyclone V SoC has two ethernet controllers and different boards use none, one or both of them. The /soc/ethernet@ff702000/{} node in socfpga_cyclone5.dtsi unconditionaly enabled gmac0 interface, which is clearly wrong for those boards which use gmac1 interface instead. This patch removes the entire /soc/ethernet@ff702000/{} node from the socfpga_cyclone5.dtsi file. This is correct, since all of the board which include this file also have correct gmac0 or gmac1 node present in them. Minor correction had to be done to EBV SoCrates, which didn't define PHY mode explicitly, but inherited it from the socfpga_cyclone5.dtsi . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Marek Vasut authored
The phy-addr property of stmmac is deprecated and the stmmac driver does not use it either. On the contrary, the driver will warn if this property is defined. Remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Graham Moore authored
The PL330 DMA driver will not load on Arria10 without devicetree entries for clocks and clock_names. This patch adds those entries. It also adds the ninth interrupt, which is required for error detection. Signed-off-by: Graham Moore <grmoore@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Dinh Nguyen authored
The CIU clock for the SD/MMC should be the sdmmc_clk and not the sdmmc_free_clk. Also, add the correct phase shift the sdmmc_clk. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Dinh Nguyen authored
Enable SD highspeed support for the SoCFPGA Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
-
Linus Torvalds authored
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A couple of small fixes, and wiring up the new syscalls which appeared during the merge window" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8550/1: protect idiv patching against undefined gcc behavior ARM: wire up preadv2 and pwritev2 syscalls ARM: SMP enable of cache maintanence broadcast
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.6 rc3: MMC host: - sdhci: Fix regression setting power on Trats2 board - sdhci-pci: Add support and PCI IDs for more Broxton host controllers" * tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers mmc: sdhci: Fix regression setting power on Trats2 board
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C: - fix a uevent triggered boot problem by removing a useless debug print - fix sysfs-attributes of the new i2c-demux-pinctrl driver to follow standard kernel behaviour - fix a potential division-by-zero error (needed two takes)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: jz4780: really prevent potential division by zero Revert "i2c: jz4780: prevent potential division by zero" i2c: jz4780: prevent potential division by zero i2c: mux: demux-pinctrl: Update docs to new sysfs-attributes i2c: mux: demux-pinctrl: Clean up sysfs attributes i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE
-
- 10 Apr, 2016 1 commit
-
-
Linus Torvalds authored
This reverts commit 1028b55b. It's broken: it makes ext4 return an error at an invalid point, causing the readdir wrappers to write the the position of the last successful directory entry into the position field, which means that the next readdir will now return that last successful entry _again_. You can only return fatal errors (that terminate the readdir directory walk) from within the filesystem readdir functions, the "normal" errors (that happen when the readdir buffer fills up, for example) happen in the iterorator where we know the position of the actual failing entry. I do have a very different patch that does the "signal_pending()" handling inside the iterator function where it is allowable, but while that one passes all the sanity checks, I screwed up something like four times while emailing it out, so I'm not going to commit it today. So my track record is not good enough, and the stars will have to align better before that one gets committed. And it would be good to get some review too, of course, since celestial alignments are always an iffy debugging model. IOW, let's just revert the commit that caused the problem for now. Reported-by: Greg Thelen <gthelen@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 Apr, 2016 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Since commit 0de79858 ("parisc: Use generic extable search and sort routines") module loading is boken on parisc, because the parisc module loader wasn't prepared for the new R_PARISC_PCREL32 relocations. In addition, due to that breakage, Mikulas Patocka noticed that handling exceptions from modules probably never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. This patch series fixes those issues and survives the tests of the lib/test_user_copy kernel module test. Some patches are tagged for stable" * 'parisc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Update comment regarding relative extable support parisc: Unbreak handling exceptions from kernel modules parisc: Fix kernel crash with reversed copy_from_user() parisc: Avoid function pointers for kernel exception routines parisc: Handle R_PARISC_PCREL32 relocations in kernel modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "Three fixes, the first two are tagged for -stable: - The ndctl utility/library gained expanded unit tests illuminating a long standing bug in the libnvdimm SMART data retrieval implementation. It has been broken since its initial implementation, now fixed. - Another one line fix for the detection of stale info blocks. Without this change userspace can get into a situation where it is unable to reconfigure a namespace. - Fix the badblock initialization path in the presence of the new (in v4.6-rc1) section alignment workarounds. Without this change badblocks will be reported at the wrong offset. These have received a build success report from the kbuild robot and have appeared in -next with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pfn: fix nvdimm_namespace_add_poison() vs section alignment libnvdimm, pfn: fix uuid validation libnvdimm: fix smart data retrieval
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here is a set of four GPIO fixes. The two fixes to the core are serious as they are regressing minor architectures. Core fixes: - Defer GPIO device setup until after gpiolib is initialized. It turns out that a few very tightly integrated GPIO platform drivers initialize so early (befor core_initcall()) so that the gpiolib isn't even initialized itself. That limits what the library can do, and we cannot reference uninitialized fields until later. Defer some of the initialization until right after the gpiolib is initialized in these (rare) cases. - As a consequence: do not use devm_* resources when allocating the states in the initial set-up of the gpiochip. Driver fixes: - In ACPI retrieveal: ignore GpioInt when looking for output GPIOs. - Fix legacy builds on the PXA without a backing pin controller. - Use correct datatype on pca953x register writes" * tag 'gpio-v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Use correct u16 value for register word write gpiolib: Defer gpio device setup until after gpiolib initialization gpiolib: Do not use devm functions when registering gpio chip gpio: pxa: fix legacy non pinctrl aware builds gpio / ACPI: ignore GpioInt() GPIOs when requesting GPIO_OUT_*
-