- 18 Jan, 2023 40 commits
-
-
Steen Hegelund authored
Add a new function that just checks if the VCAP rule id is already used by an existing rule. Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This adds support for TC clients to get the packet count for a TC filter identified by its cookie. Signed-off-by:
-
Hayes Wang authored
The rtl8152_cfgselector_probe() should set the USB configuration to the vendor mode only for the devices which the driver (r8152) supports. Otherwise, no driver would be used for such devices. Fixes: ec51fbd1 ("r8152: add USB device driver for config selection") Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Robert Hancock authored
This driver was capturing the TX timestamp values from the TX ring during the TX completion path, but deferring the actual packet TX timestamp updating to a workqueue. There does not seem to be much of a reason for this with the current state of the driver. Simplify this to just do the TX timestamping as part of the TX completion path, to avoid the need for the extra timestamp buffer and workqueue. Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Parav Pandit authored
virtnet_rq_free_unused_buf() helper function to free the buffer already exists. Avoid code duplication by reusing existing function. Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
Parav Pandit <parav@nvidia.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller authored
Florian Westphal says: ==================== Netfilter updates for net-next following patch set includes netfilter updates for your *net-next* tree. 1. Replace pr_debug use with nf_log infra for debugging in sctp conntrack. 2. Remove pr_debug calls, they are either useless or we have better options in place. 3. Avoid repeated load of ct->status in some spots. Some bit-flags cannot change during the lifeetime of a connection, so no need to re-fetch those. 4. Avoid uneeded nesting of rcu_read_lock during tuple lookup. 5. Remove the CLUSTERIP target. Marked as obsolete for years, and we still have WARN splats wrt. races of the out-of-band /proc interface installed by this target. 6. Add static key to nf_tables to avoid the retpoline mitigation if/else if cascade provided the cpu doesn't need the retpoline thunk. 7. add nf_tables objref calls to the retpoline mitigation workaround. 8. Split parts of nft_ct.c that do not need symbols exported by the conntrack modules and place them in nf_tables directly. This allows to avoid indirect call for 'ct status' checks. 9. Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not indicate an error if the referenced object (set, chain, rule...) did not exist, from Fernando. ==================== Signed-off-by: -
David S. Miller authored
Gerhard Engleder says: ==================== tsnep: XDP support Implement XDP support for tsnep driver. I tried to follow existing drivers like igb/igc as far as possible. Some prework was already done in previous patch series, so in this series only actual XDP stuff is included. Thanks for the NetDev 0x14 slides "Add XDP support on a NIC driver". Some commits contain changes not related to XDP but found during review of XDP support patches. v5: - fix spelling of 'subtract' in commit message (Alexander Duyck) - call txq_trans_cond_update() only if TX is complete (Alexander Duyck) - remove const from static functions (Alexander Duyck) - replace TX spin_lock with __netif_tx_lock (Alexander Duyck) - use xdp_return_frame_rx_napi() instead of xdp_return_frame_bulk() (Alexander Duyck) - eliminate __TSNEP_DOWN (Alexander Duyck) - introduce single function for xdp_rxq and napi init (Alexander Duyck) - use TX queue of pair instead of expensive processor id modulo for XDP_TX (Alexander Duyck) - eliminate processor id modulo in tsnep_netdev_xdp_xmit (Alexander Duyck) - use bitmap for TX type and add fragment type (Alexander Duyck) - always use XDP_PACKET_HEADROOM and DMA_BIDIRECTIONAL v4: - remove process context from spin_lock_bh commit message (Alexander Lobakin) - move tsnep_adapter::state to prevent 4 byte hole (Alexander Lobakin) - braces for bitops in combination logical ops (Alexander Lobakin) - make various pointers const (Alexander Lobakin) - '!i' instead of 'i == 0' (Alexander Lobakin) - removed redundant braces (Alexander Lobakin) - squash variables into same line if same type (Alexander Lobakin) - use fact that ::skb and ::xdpf use same slot for simplification (Alexander Lobakin) - use u32 for smp_processor_id() (Alexander Lobakin) - don't add $(tsnep-y) to $(tsnep-objs) (Alexander Lobakin) - use rev xmas tree in tsnep_netdev_open() (Alexander Lobakin) - do not move tsnep_queue::napi (Alexander Lobakin) - call xdp_init_buff() only once (Alexander Lobakin) - get nq and tx only once for XDP TX (Alexander Lobakin) - move XDP BPF program setup to end of patch series (Alexander Lobakin) - check for XDP state change and prevent redundant down-ups (Alexander Lobakin) - access tsnep_adapter::xdp_prog only with READ_ONCE in RX path (Alexander Lobakin) - forward NAPI budget to napi_consume_skb() (Alexander Lobakin) - fix errno leftover in tsnep_xdp_xmit_back() (Dan Carpenter) - eliminate tsnep_xdp_is_enabled() by setting RX offset during init v3: - use spin_lock_bh for TX (Paolo Abeni) - add comment for XDP TX descriptor available check (Maciej Fijalkowski) - return value bool for tsnep_xdp_xmit_frame_ring() (Saeed Mahameed) - do not print DMA mapping error (Saeed Mahameed) - use reverse xmas tree variable declaration (Saeed Mahameed) - move struct xdp_rxq_info to end of struct tsnep_rx (Maciej Fijalkowski) - check __TSNEP_DOWN flag on close to prevent double free (Saeed Mahameed) - describe TSNEP_RX_INLINE_METADATA_SIZE in comment (Maciej Fijalkowski) - substract TSNEP_RX_INLINE_METADATA_SIZE after DMA sync (Maciej Fijalkowski) - use enum tsnep_tx_type for tsnep_xdp_tx_map (Saeed Mahameed) - use nxmit as loop iterator in tsnep_netdev_xdp_xmit (Saeed Mahameed) - stop netdev in tsnep_netdev_close() which is called during BPF prog setup v2: - move tsnep_xdp_xmit_back() to commit where it is used (Paolo Abeni) - remove inline from tsnep_rx_offset() (Paolo Abeni) - remove inline from tsnep_rx_offset_xdp() (Paolo Abeni) - simplify tsnep_xdp_run_prog() call by moving xdp_status update to it (Paolo Abeni) ==================== Signed-off-by: -
Gerhard Engleder authored
Implement setup of BPF programs for XDP RX path with command XDP_SETUP_PROG of ndo_bpf(). This is the final step for XDP RX path support. There is no need to reinit the RX queues as they are always prepared for XDP. Additionally remove $(tsnep-y) from $(tsnep-objs) because it is added automatically. Test results with A53 1.2GHz: XDP_DROP (samples/bpf/xdp1) proto 17: 883878 pkt/s XDP_TX (samples/bpf/xdp2) proto 17: 255693 pkt/s XDP_REDIRECT (samples/bpf/xdpsock) sock0@eth2:0 rxdrop xdp-drv pps pkts 1.00 rx 855,582 5,404,523 tx 0 0 XDP_REDIRECT (samples/bpf/xdp_redirect) eth2->eth1 613,267 rx/s 0 err,drop/s 613,272 xmit/s Signed-off-by:Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by:
-
Gerhard Engleder authored
If BPF program is set up, then run BPF program for every received frame and execute the selected action. Signed-off-by:
-
Gerhard Engleder authored
Register xdp_rxq_info with page_pool memory model. This is needed for XDP buffer handling. Additionally fix error path by removing call of tsnep_phy_close() after failed tsnep_phy_open(). Signed-off-by:
-
Gerhard Engleder authored
Always reserve XDP_PACKET_HEADROOM in front of RX buffer. Similar DMA direction is always set to DMA_BIDIRECTIONAL. This eliminates the need for RX queue reconfiguration during BPF program setup. The RX queue is always prepared for XDP. No negative impact of DMA_BIDIRECTIONAL was measured. Signed-off-by:
-
Gerhard Engleder authored
Subtract size of metadata in front of received data only once. This simplifies the RX code. Signed-off-by:
-
Gerhard Engleder authored
Implement ndo_xdp_xmit() for XDP TX support. Support for fragmented XDP frames is included. Also some braces and logic cleanups are done in normal TX path to keep both TX paths in sync. Signed-off-by:
-
Gerhard Engleder authored
Printing in data path shall be avoided. DMA mapping error is already counted in stats so printing is not necessary. Signed-off-by:
-
Gerhard Engleder authored
NAPI budget must be forwarded to napi_consume_skb(). It is used to detect non-NAPI context. Signed-off-by:
-
Gerhard Engleder authored
TX spin_lock can be eliminated, because the normal TX path is already protected with __netif_tx_lock and this lock can be used for access to queue outside of normal TX path too. Signed-off-by:
-
Sergei Antonov authored
When netdev->flags has IFF_PROMISC or IFF_ALLMULTI, set the corresponding bits in the MAC Control Register (MACCR). This change is based on code from the ftgmac100 driver, see ftgmac100_start_hw() in ftgmac100.c Signed-off-by:
Sergei Antonov <saproj@gmail.com> Signed-off-by:
-
Tanmay Bhushan authored
Per cpu entries are no longer used in consideration for doing gc or not. Remove the extra per cpu entries pull to directly check for time and perform gc. Signed-off-by:
Tanmay Bhushan <007047221b@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Siddharth Vadapalli says: ==================== Add PPS support to am65-cpts driver The CPTS hardware doesn't support PPS signal generation. Using the GenFx (periodic signal generator) function, it is possible to model a PPS signal followed by routing it via the time sync router to the CPTS_HWy_TS_PUSH (hardware time stamp) input, in order to generate timestamps at 1 second intervals. This series adds driver support for enabling PPS signal generation. Additionally, the documentation for the am65-cpts driver is updated with the bindings for the "ti,pps" property, which is used to inform the pair [CPTS_HWy_TS_PUSH, GenFx] to the cpts driver. Changes from v1: 1. Drop device-tree patches. 2. Address Roger's comments on the: "net: ethernet: ti: am65-cpts: add pps support" patch. 3. Collect Reviewed-by tag from Rob Herring. v1: https://lore.kernel.org/r/20230111114429.1297557-1-s-vadapalli@ti.com/ ==================== Signed-off-by:
-
Grygorii Strashko authored
When CPTS clock is sync/adjusted by running linuxptp (ptp4l) it will cause PPS jitter as Genf running PPS is not adjusted. The same PPM adjustment has to be applied to GenF as to PHC clock to correct PPS length and keep them in sync. Testing: Master: ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp1 -f ptp.cfg & testptp -d /dev/ptp1 -P 1 ppstest /dev/pps0 Slave: linuxptp/ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp1 -f ptp1.cfg -s & <port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED;> testptp -d /dev/ptp1 -P 1 ppstest /dev/pps0 Master log: source 0 - assert 620.000000689, sequence: 530 source 0 - assert 621.000000689, sequence: 531 source 0 - assert 622.000000689, sequence: 532 source 0 - assert 623.000000689, sequence: 533 source 0 - assert 624.000000689, sequence: 534 source 0 - assert 625.000000689, sequence: 535 source 0 - assert 626.000000689, sequence: 536 source 0 - assert 627.000000689, sequence: 537 source 0 - assert 628.000000689, sequence: 538 source 0 - assert 629.000000689, sequence: 539 source 0 - assert 630.000000689, sequence: 540 source 0 - assert 631.000000689, sequence: 541 source 0 - assert 632.000000689, sequence: 542 source 0 - assert 633.000000689, sequence: 543 source 0 - assert 634.000000689, sequence: 544 source 0 - assert 635.000000689, sequence: 545 Slave log: source 0 - assert 620.000000706, sequence: 252 source 0 - assert 621.000000709, sequence: 253 source 0 - assert 622.000000707, sequence: 254 source 0 - assert 623.000000707, sequence: 255 source 0 - assert 624.000000706, sequence: 256 source 0 - assert 625.000000705, sequence: 257 source 0 - assert 626.000000709, sequence: 258 source 0 - assert 627.000000709, sequence: 259 source 0 - assert 628.000000707, sequence: 260 source 0 - assert 629.000000706, sequence: 261 source 0 - assert 630.000000710, sequence: 262 source 0 - assert 631.000000708, sequence: 263 source 0 - assert 632.000000705, sequence: 264 source 0 - assert 633.000000710, sequence: 265 source 0 - assert 634.000000708, sequence: 266 source 0 - assert 635.000000707, sequence: 267 Signed-off-by:Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
-
Grygorii Strashko authored
CPTS doesn't have HW support for PPS ("pulse per second”) signal generation, but it can be modeled by using Time Sync Router and routing GenFx (periodic signal generator) output to CPTS_HWy_TS_PUSH (hardware time stamp) input, and configuring GenFx to generate 1sec pulses. +------------------------+ | CPTS | | | +--->CPTS_HW4_PUSH GENFx+---+ | | | | | +------------------------+ | | | +--------------------------------+ Add corresponding support to am65-cpts driver. The DT property "ti,pps" has to be used to enable PPS support and configure pair [CPTS_HWy_TS_PUSH, GenFx]. Once enabled, PPS can be tested using ppstest tool: # ./ppstest /dev/pps0 Signed-off-by: -
Grygorii Strashko authored
Add the ti,pps property used to indicate the pair of HWx_TS_PUSH input and the TS_GENFy output. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David S. Miller authored
Clark Wang says: ==================== stmmac: Add eqos and fec support for imx93 This patchset add imx93 support for dwmac-imx glue driver. There are some changes of GPR implement. And add fec and eqos nodes for imx93 dts. ==================== Signed-off-by: -
Clark Wang authored
Enable FEC function for imx93-11x11-evk board. Signed-off-by:
Clark Wang <xiaoning.wang@nxp.com> Reviewed-by:
Peng Fan <peng.fan@nxp.com> Signed-off-by:
-
Clark Wang authored
Enable EQoS function for imx93-11x11-evk board. Signed-off-by:
-
Clark Wang authored
Add FEC node for imx93 platform. Signed-off-by:
-
Clark Wang authored
Add EQoS node for imx93 platform. Signed-off-by:
-
Clark Wang authored
Add mx93 compatible string for fec driver. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Clark Wang authored
Add mx93 compatible string for eqos driver. Signed-off-by:
-
Clark Wang authored
Add imx93 platform support for dwmac-imx driver. Signed-off-by:
-
Fernando Fernandez Mancera authored
Introduce NFT_MSG_DESTROY* message type. The destroy operation performs a delete operation but ignoring the ENOENT errors. This is useful for the transaction semantics, where failing to delete an object which does not exist results in aborting the transaction. This new command allows the transaction to proceed in case the object does not exist. Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Florian Westphal <fw@strlen.de>
-
Florian Westphal authored
nft_ct expression cannot be made builtin to nf_tables without also forcing the conntrack itself to be builtin. However, this can be avoided by splitting retrieval of a few selector keys that only need to access the nf_conn structure, i.e. no function calls to nf_conntrack code. Many rulesets start with something like "ct status established,related accept" With this change, this no longer requires an indirect call, which gives about 1.8% more throughput with a simple conntrack-enabled forwarding test (retpoline thunk used). Signed-off-by: -
Florian Westphal authored
objref expression is builtin, so avoid calls to it for RETOLINE=y builds. Signed-off-by: -
Florian Westphal authored
If CONFIG_RETPOLINE is enabled nf_tables avoids indirect calls for builtin expressions. On newer cpus indirect calls do not go through the retpoline thunk anymore, even for RETPOLINE=y builds. Just like with the new tc retpoline wrappers: Add a static key to skip the if / else if cascade if the cpu does not require retpolines. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Florian Westphal authored
Marked as 'to be removed soon' since kernel 4.1 (2015). Functionality was superseded by the 'cluster' match, added in kernel 2.6.30 (2009). clusterip_tg_check still has races that can give proc_dir_entry 'ipt_CLUSTERIP/10.1.1.2' already registered followed by a WARN splat. Remove it instead of trying to fix this up again. clusterip uapi header is left as-is for now. Signed-off-by: -
Florian Westphal authored
Move rcu_read_lock/unlock to nf_conntrack_find_get(), this avoids nested rcu_read_lock call from resolve_normal_ct(). Signed-off-by: -
Florian Westphal authored
Compiler can't merge the two test_bit() calls, so load ct->status once and use non-atomic accesses. This is fine because IPS_EXPECTED or NAT_CLASH are either set at ct creation time or not at all, but compiler can't know that. Signed-off-by: -
Florian Westphal authored
Those are all useless or dubious. getorigdst() is called via setsockopt, so return value/errno will already indicate an appropriate error. For other pr_debug calls there are better replacements, such as slab/slub debugging or 'conntrack -E' (ctnetlink events). Signed-off-by: -
Florian Westphal authored
The conntrack logging facilities include useful info such as in/out interface names and packet headers. Use those in more places instead of pr_debug calls. Furthermore, several pr_debug calls can be removed, they are useless on production machines due to the sheer volume of log messages. Signed-off-by: -
Jakub Kicinski authored
Michael Walle says: ==================== net: mdio: Continue separating C22 and C45 I've picked this older series from Andrew up and rebased it onto the latest net-next. This is the third (and hopefully last) patch set in the series which separates the C22 and C45 MDIO bus transactions at the API level to the MDIO bus drivers. The first patch is a newer version of the former "net: dsa: Separate C22 and C45 MDIO bus transaction methods", which only contains the mt7530 changes. Although posted as v1, because this is a new series, there is a changelog included in the patch comment section. The last patch is a new one, which isn't from Andrew's tree. ==================== Link: https://lore.kernel.org/r/20230116-net-next-c45-seperation-part-3-v1-0-0c53afa56aad@walle.ccSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
