- 10 Oct, 2007 40 commits
-
-
Holger Schurig authored
No code ever initialized this variable, so it was 0 because of kzalloc(). But no other code changes it, making it rather useless. Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Holger Schurig authored
Those two variables were initialized with some default values, but there is no code that would ever change them. So we could use as well the defaults directly. Signed-off-by:
-
Holger Schurig authored
No code uses the contents of this variable, so it can go. Signed-off-by:
-
Holger Schurig authored
The value of txrate was only set by a CMD_802_11_TX_RATE_QUERY command, but there was no code in the driver that ever issued this command. Signed-off-by:
-
Dan Williams authored
Found by Ronak and others at Marvell. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Holger Schurig authored
The variable was initialized to 0 and nowhere else changed, so basically the per-packet TX control wasn't used. Signed-off-by:
-
Holger Schurig authored
The variable was initialized to 0 and nowhere else to anything different. Signed-off-by:
-
Holger Schurig authored
The value 1 was assigned to it and there was nowhere any code that would have changed that to 0. Signed-off-by:
-
Holger Schurig authored
There was nowhere any code that used the values of those variables. This patch also removes two static functions that are now unused. Signed-off-by:
-
Holger Schurig authored
There were just used in some debug output, but nowhere else. Signed-off-by:
-
Holger Schurig authored
This patch adds support for Marvell based 8385 compact flash cards. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Luis Carlos Cobo authored
Signed-off-by:
Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by:
-
Holger Schurig authored
... and LBS_DEB_CMD for command execution. Also tidies misc comments to give a consistent output. Signed-off-by:
-
Holger Schurig authored
... and LBS_DEB_CMD for command execution. Also tidies misc comments to give a consistent output. Signed-off-by:
-
Holger Schurig authored
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions. They contains the same info: the firmware command opcode and, when the firmware sends back a result, the command opcode ORed with 0x8000. Having the same data twice in the source code is redundant and can lead to errors (e.g. if you update or delete only one instance). This patch removed all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro. Signed-off-by:
-
Holger Schurig authored
Currently, when you define LBS_DEB_HEX, you get every hex dump in the whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This patch makes sure that you only get the hexdump that you're interested in. Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX() macros. Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes. As lbs_deb_hex() now prints the ":" after the prompt by itself, removed the misc colons in the various *.c files. lbs_deb_XXX() now print the debug category as well. As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the category, I removed various "11D:" prefixes in 11d.c as well. Signed-off-by:
-
Luis Carlos Cobo authored
echo 0 > /sys/class/net/mshX/autostart_enabled This is supported from Marvell firmware version 5.110.16.p0 (to be released). Signed-off-by:
-
Holger Schurig authored
There is nowhere any place that set's this variable. Signed-off-by:
-
Holger Schurig authored
This changes the output of hardware related info from: libertas: GET_HW_SPEC: FWReleaseVersion- 5.0.11.p0 libertas: GET_HW_SPEC: Permanent addr- 0:16:41:72:f6:a8 libertas: GET_HW_SPEC: hwifversion=0x2 version=0x213 to: libertas: GET_HW_SPEC: FWReleaseVersion: 5.0.11.p0 libertas: GET_HW_SPEC: Permanent addr: 00:16:41:72:f6:a8 libertas: GET_HW_SPEC: hwifversion: 0x2, version: 0x213 Signed-off-by:
-
Holger Schurig authored
The CF/SDIO firmware doesn't support Mesh, so priv->mesh_dev is NULL there. Protect all accesses. Signed-off-by:
-
Holger Schurig authored
Usually constants defined by #define are in ALL_UPPERCASE. This patch fixes this. I also shuffled the bits around so that they match the bit positions in the host-interrupt-state register of the CF/SDIO card :-) Signed-off-by:
-
Holger Schurig authored
Some functions where declared in header files, but used only once. They are now static functions. After doing this, I found out that some functions weren't used at all. I removed this dead code. Signed-off-by:
-
Holger Schurig authored
adhoc_rates_b is only used locally, so make it static Signed-off-by:
-
Holger Schurig authored
Firmware download is quite different for different hardware. The SDIO and CF cards have two flat files that need to be downloaded, whereas the USB driver needs only one file, but with an internal structure. The code that handles this (USB only) structured file is currently in fw.c. This patch moves this code into if_usb.c. The remaining functions in fw.c have not much to do with firmware, they are various card- and network-stack initialisation functions. I've moved them into main.c. Signed-off-by:
-
Dan Williams authored
Remove unused/duplicated fields and consolidate static data rate arrays, for example the libertas_supported_rates[] and datarates[] arrays in the bss_descriptor structure, and the libertas_supported_rates field in the wlan_adapter structure. Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index functions and use them everywhere firmware requires a rate index rather than a rate array. The firmware requires the 4 basic rates to have the MSB set, but most other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB on basic rates when pushing rate arrays to firmware instead of doing a ton of (rate & 0x7f) everywhere. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
It's not USB specific, so move it out of the USB interface code. Signed-off-by:
-
Dan Williams authored
Mistakently introduced by a previous patch to upper-case all command constants. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Support for new mesh control knobs on firmware 5.220.11.p4: Signed-off-by:
-
Dan Williams authored
Remove the thread.h abstractions and opencode kthread stuff to make it clearer. Signed-off-by:
-
Dan Williams authored
Missed when fixing mixed-case structure field names. Signed-off-by:
-
Dan Williams authored
For readability. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Move the only function in it to if_usb.c, which was its only user anyway. Signed-off-by:
-
Luis Carlos Cobo authored
With this patch, scanning with mshX interface will only return mesh networks. To differentiate them, a specific mesh IE in beacons/probe responses is used. This IE has been introduced in firmware release 5.110.14. Note: Even though there can be at most a single mesh per channel, this scan might return several networks in the same channel. If all nodes in a mesh network are associated to an AP, they won't produce beacons/probe responses, thus the network will not be listed. This will be fixed in future firmware releases. Scan on ethX interface is not filtered, so it will list both mesh and non-mesh networks. Signed-off-by:
-
Dan Williams authored
Remove struct IE_WPA and just use direct checking of the IE bytes like ipw. Remove WLAN_802_11_VARIABLE_IEs because it's unused. Kill ieeetypes_elementid enum and just use MFIE_* from ieee80211.h. Also use struct ieee80211_info_element for scan buffer processing to simplify pointer usage. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
