Initialise the spinlock for port being used by the console early, but
don't re-initialise it again later.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

That zero just means that nothing else found any irq information either.

This fixes the bug that caused BUG_ON(!irqs_disabled()) to trigger in
run_posix_cpu_timers() on alpha/smp.  We didn't disable interrupts
properly before calling smp_percpu_timer_interrupt().

We *do* disable interrupts everywhere except this unfortunate
smp_percpu_timer_interrupt().  Fixed thus.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch contains the following possible cleanups:
- make some needlessly global code static
- remove the unneeded global function DBG_REG
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Wait 0.5 seconds before scanning for cards after an insertion interrupt.
The electrical connection needs this time to stabilise for some cards.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. Neither signals nor wait-queue events are
important at this point in the code, I believe.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Use do_div() instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Make the magic address values in head.S more obvious as to where
they came from.  Wrap all debug code in CONFIG_DEBUG_LL.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The omnimeter_defconfig does not define any machines and
seems to have no other support in the current kernel.
This patch removes the config file, as this is the only
thing currently mentioning the ominmeter.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Todd Poynor

Add definition of K0DB4 SDCLK<0,3> divide-by-4 control/status bit in the
MDREFR register for Intel XScale PXA27x.
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Todd Poynor

Add support for PXA27x Standby mode, a low-power mode that retains CPU
and some peripheral state (the existing "sleep" mode is a power-power
mode that retains less state). Activated via:
echo -n standby > /sys/power/state
From: David Burrage and Todd Poynor
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fixup for the recent slab leak fix

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

As usual, the reason of this breakage is quite silly: in do_entIF, we
are checking for PS == 0 to see whether it was a kernel BUG() or
userspace trap.

It works, unless BUG() happens in interrupt - PS is not 0 in kernel mode
due to non-zero IPL, and the things get messed up horribly then.  In
this particular case it was BUG_ON(!irqs_disabled()) triggered in
run_posix_cpu_timers(), so we ended up shooting "current" with the
bursts of one SIGTRAP and three SIGILLs on every timer tick.  ;-)

Patch from Catalin Marinas

This patch calculates the AFS partition length by expanding the image
length information to the nearest erase block boundary. This
eliminates the problems with JFFS2 erasing the footer.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

If CONFIG_SERIAL_8250_NR_UARTS is smaller than the array size in
asm/serial.h, we trampled on memory which wasn't ours.  Take our
big boots away by limiting the number of ports initialised to the
smaller of ...NR_UARTS and the array size.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

This patch fixes the V bit setting for the ARM1020x processors. At
reset, this bit is automatically set to the value of the HIVECSINIT
input signal which just happened to be 1 but it is not mandatory.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The new EABI gcc adds -mthumb-interwork by default, even if
-mabi=apcs-gnu is passed. This causes a warning for every compiled C
file when -march=armv4 is used. The patch adds -mno-thumb-interwork
if the option is supported. This is also useful since we don't need
any ARM/Thumb interworking in the kernel
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

This patch fixes a broken comment in the proc-arm1020.S file which
prevents the file compilation
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fix a use-uninitialised bug.

Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch addresses the following minor issues:

  - Typo in printk
  - Redundant casts
  - Use C99 struct initializers instead of memset
  - Parenthesis around return value
  - Use inline instead of __inline__
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch removes 2.4 compatability header from freevxfs.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- fix a buffer_head leak in vxfs_getfsh()

- s/SLAB_KERNEL/GFP_KERNEL/

- check sb_bread() return value

- drop pointless buffer-mapped() test.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On system boot up, there was an failure reported to boot.msg:

     <5>Trying to move old root to /initrd ... failed

According to initrd(4) man page, step #7 of BOOT-UP OPERATION
is described as below:
          7. If the normal root file has directory /initrd, device
          /dev/ram0 is moved from  /  to  /initrd.   Otherwise  if
          directory  /initrd  does  not  exist device /dev/ram0 is
          unmounted.

We got service calls from customers concerning about this failure message
at boot time.  Many systems do not have /initrd and thus the message can be
changed in the case of non-existing /initrd so that it does not sound like
a failure of the system.
Signed-off-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

udf_find_entry can never be called with a NULL argument, so we shouldn't
check for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch plugs a slab cache leak in fat module initialization.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Removed dead code in arch/xtensa/kernel/pci.c and use the pci_name() macro.
 Fixed an error in the delay asm macro: '1' is an invalid immediate value.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out).  Some minor
clean-ups in the make files.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Added 'mm/Kconfig' to the xtensa Kconfig file to get a flat memory layout.
Fixed a typo in one of the help texts (thanks Geert for pointing it out)
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I noticed this because I was doing some more ipc cleanups and I did the
original errno and ipc cleanups for other architectures, so it stuck out.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

xtensa should use valid_signal() instead of testing _NSIG directly like
everyone else.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Introduce proper declarations for i8253_lock and i8259A_lock.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Editor snafu in which the call to ppc_sys_get_pdata got inside the if check
instead of before it.  Oops.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Currently selinux_sb_copy_data requires an entire page be allocated to
*orig when the function is called.  This "requirement" is based on the fact
that we call copy_page(in_save, nosec_save) and in_save = orig when the
data is not FS_BINARY_MOUNTDATA.  This means that if a caller were to call
do_kern_mount with only about 10 bytes of options, they would get passed
here and then we would corrupt PAGE_SIZE - 10 bytes of memory (with all
zeros.)

Currently it appears all in kernel FS's use one page of data so this has
not been a problem.  An out of kernel FS did just what is described above
and it would almost always panic shortly after they tried to mount.  From
looking else where in the kernel it is obvious that this string of data
must always be null terminated.  (See example in do_mount where it always
zeros the last byte.) Thus I suggest we use strcpy in place of copy_page.
In this way we make sure the amount we copy is always less than or equal to
the amount we received and since do_mount is zeroing the last byte this
should be safe for all.
Signed-off-by: Eric Paris <eparis@parisplace.org>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Acked-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In fixing the /proc/misc problem that was reported last week where the tpm
module name was being obfuscated in /proc/misc I introduced a bug in the
module unloading code.  This patch fixes the problem.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>