- 03 Apr, 2019 27 commits
-
-
Zhiqiang Liu authored
[ Upstream commit cc4807bb ] Commit ad6c9986 ("vxlan: Fix GRO cells race condition between receive and link delete") fixed a race condition for the typical case a vxlan device is dismantled from the current netns. But if a netns is dismantled, vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue() of all the vxlan tunnels that are related to this netns. In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before unregister_netdevice_queue(). This means that the gro_cells_destroy() call is done too soon, for the same reasons explained in above commit. So we need to fully respect the RCU rules, and thus must remove the gro_cells_destroy() call or risk use after-free. Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by:
Suanming.Mou <mousuanming@huawei.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sabrina Dubroca authored
[ Upstream commit 1017e098 ] VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250 ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <dsahern@gmail.com> Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4477138f ] Same reasons than the ones explained in commit 4179cb5a ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx_ni() or napi_gro_frags() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro layer. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Fixes: 1bd4978a ("tun: honor IFF_UP in tun_get_user()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Erik Hugne authored
[ Upstream commit 33872d79 ] When cancelling a subscription, we have to clear the cancel bit in the request before iterating over any established subscriptions with memcmp. Otherwise no subscription will ever be found, and it will not be possible to explicitly unsubscribe individual subscriptions. Fixes: 8985ecc7 ("tipc: simplify endianness handling in topology subscriber") Signed-off-by:
Erik Hugne <erik.hugne@gmail.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 9926cb5f ] When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
-
Erik Hugne authored
[ Upstream commit ea239314 ] We move the check that prevents connecting service ranges to after the RDM/DGRAM check, and move address sanity control to a separate function that also validates the service range. Fixes: 23998835 ("tipc: improve address sanity check in tipc_connect()") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 89e41309 ] When a dual stack tcp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or tcp_v6_iif() helper. Fixes: 1397ed35 ("ipv6: add flowinfo for tcp6 pkt_options for all cases") Fixes: df3687ff ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Xin Long authored
[ Upstream commit ef82bcfa ] In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates memory with addrs_size which is passed from userspace. We used flag GFP_USER to put some more restrictions on it in Commit cacc0621 ("sctp: use GFP_USER for user-controlled kmalloc"). However, since Commit c981f254 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()"), vmemdup_user() has been used, which doesn't check GFP_USER flag when goes to vmalloc_*(). So when addrs_size is a huge value, it could exhaust memory and even trigger oom killer. This patch is to use memdup_user() instead, in which GFP_USER would work to limit the memory allocation with a huge addrs_size. Note we can't fix it by limiting 'addrs_size', as there's no demand for it from RFC. Reported-by: syzbot+ec1b7575afef85a0e5ca@syzkaller.appspotmail.com Fixes: c981f254 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 273160ff ] sctp_hdr(skb) only works when skb->transport_header is set properly. But in Netfilter, skb->transport_header for ipv6 is not guaranteed to be right value for sctphdr. It would cause to fail to check the checksum for sctp packets. So fix it by using offset, which is always right in all places. v1->v2: - Fix the changelog. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 408f13ef ] As it stands if a shrink is delayed because of an outstanding rehash, we will go into a rescheduling loop without ever doing the rehash. This patch fixes this by still carrying out the rehash and then rescheduling so that we can shrink after the completion of the rehash should it still be necessary. The return value of EEXIST captures this case and other cases (e.g., another thread expanded/rehashed the table at the same time) where we should still proceed with the rehash. Fixes: da20420f ("rhashtable: Add nested tables") Reported-by:
Josh Elsasser <jelsasser@appneta.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
-
Maxime Chevallier authored
[ Upstream commit a4dc6a49 ] When using fanouts with AF_PACKET, the demux functions such as fanout_demux_cpu will return an index in the fanout socket array, which corresponds to the selected socket. The ordering of this array depends on the order the sockets were added to a given fanout group, so for FANOUT_CPU this means sockets are bound to cpus in the order they are configured, which is OK. However, when stopping then restarting the interface these sockets are bound to, the sockets are reassigned to the fanout group in the reverse order, due to the fact that they were inserted at the head of the interface's AF_PACKET socket list. This means that traffic that was directed to the first socket in the fanout group is now directed to the last one after an interface restart. In the case of FANOUT_CPU, traffic from CPU0 will be directed to the socket that used to receive traffic from the last CPU after an interface restart. This commit introduces a helper to add a socket at the tail of a list, then uses it to register AF_PACKET sockets. Note that this changes the order in which sockets are listed in /proc and with sock_diag. Fixes: dc99f600 ("packet: Add fanout support") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit a3e23f71 ] In netdev_queue_add_kobject and rx_queue_add_kobject, if sysfs_create_group failed, kobject_put will call netdev_queue_release to decrease dev refcont, however dev_hold has not be called. So we will see this while unregistering dev: unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1 Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: d0d66837 ("net: don't decrement kobj reference count on init failure") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 223a960c ] When using 16K DMA buffers and ring mode, the DES3 refill is not working correctly as the function is using a bogus pointer for checking the private data. As a result stale pointers will remain in the RX descriptor ring, so DMA will now likely overwrite/corrupt some already freed memory. As simple reproducer, just receive some UDP traffic: # ifconfig eth0 down; ifconfig eth0 mtu 9000; ifconfig eth0 up # iperf3 -c 192.168.253.40 -u -b 0 -R If you didn't crash by now check the RX descriptors to find non-contiguous RX buffers: cat /sys/kernel/debug/stmmaceth/eth0/descriptors_status [...] 1 [0x2be5020]: 0xa3220321 0x9ffc1ffc 0x72d70082 0x130e207e ^^^^^^^^^^^^^^^^^^^^^ 2 [0x2be5040]: 0xa3220321 0x9ffc1ffc 0x72998082 0x1311a07e ^^^^^^^^^^^^^^^^^^^^^ A simple ping test will now report bad data: # ping -s 8200 192.168.253.40 PING 192.168.253.40 (192.168.253.40) 8200(8228) bytes of data. 8208 bytes from 192.168.253.40: icmp_seq=1 ttl=64 time=1.00 ms wrong data byte #8144 should be 0xd0 but was 0x88 Fix the wrong pointer. Also we must refill DES3 only if the DMA buffer size is 16K. Fixes: 54139cf3 ("net: stmmac: adding multiple buffers for rx") Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e5dcc0c3 ] rose_write_internal() uses a temp buffer of 100 bytes, but a manual inspection showed that given arbitrary input, rose_create_facilities() can fill up to 110 bytes. Lets use a tailroom of 256 bytes for peace of mind, and remove the bounce buffer : we can simply allocate a big enough skb and adjust its length as needed. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline] BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline] BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854 CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:131 memcpy include/linux/string.h:352 [inline] rose_create_facilities net/rose/rose_subr.c:521 [inline] rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458079 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4 R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03 >ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3 ^ ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01 Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit daa5c4d0 ] If an interrupt is already pending when the interrupt is enabled on the GXL phy, no IRQ will ever be triggered. The fix is simply to make sure pending IRQs are cleared before setting up the irq mask. Fixes: cf127ff2 ("net: phy: meson-gxl: add interrupt support") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 398f0132 ] Since commit fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller found that that triggers a warning: [ 21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0 [ 21.101490] Modules linked in: [ 21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146 [ 21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630 [ 21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3 [ 21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246 [ 21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000 [ 21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000 [ 21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67 [ 21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d [ 21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d [ 21.112552] FS: 00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000 [ 21.113612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0 [ 21.115367] Call Trace: [ 21.115705] ? __alloc_pages_slowpath+0x21c0/0x21c0 [ 21.116362] alloc_pages_current+0xac/0x1e0 [ 21.116923] kmalloc_order+0x18/0x70 [ 21.117393] kmalloc_order_trace+0x18/0x110 [ 21.117949] packet_set_ring+0x9d5/0x1770 [ 21.118524] ? packet_rcv_spkt+0x440/0x440 [ 21.119094] ? lock_downgrade+0x620/0x620 [ 21.119646] ? __might_fault+0x177/0x1b0 [ 21.120177] packet_setsockopt+0x981/0x2940 [ 21.120753] ? __fget+0x2fb/0x4b0 [ 21.121209] ? packet_release+0xab0/0xab0 [ 21.121740] ? sock_has_perm+0x1cd/0x260 [ 21.122297] ? selinux_secmark_relabel_packet+0xd0/0xd0 [ 21.123013] ? __fget+0x324/0x4b0 [ 21.123451] ? selinux_netlbl_socket_setsockopt+0x101/0x320 [ 21.124186] ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0 [ 21.124908] ? __lock_acquire+0x529/0x3200 [ 21.125453] ? selinux_socket_setsockopt+0x5d/0x70 [ 21.126075] ? __sys_setsockopt+0x131/0x210 [ 21.126533] ? packet_release+0xab0/0xab0 [ 21.127004] __sys_setsockopt+0x131/0x210 [ 21.127449] ? kernel_accept+0x2f0/0x2f0 [ 21.127911] ? ret_from_fork+0x8/0x50 [ 21.128313] ? do_raw_spin_lock+0x11b/0x280 [ 21.128800] __x64_sys_setsockopt+0xba/0x150 [ 21.129271] ? lockdep_hardirqs_on+0x37f/0x560 [ 21.129769] do_syscall_64+0x9f/0x450 [ 21.130182] entry_SYSCALL_64_after_hwframe+0x49/0xbe We should allocate with __GFP_NOWARN to handle this. Cc: Kal Conley <kal.conley@dectris.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 0b91bce1 ] Christoph reported a stall while peeking datagram with an offset when busy polling is enabled. __skb_try_recv_datagram() uses as the loop termination condition 'queue empty'. When peeking, the socket queue can be not empty, even when no additional packets are received. Address the issue explicitly checking for receive queue changes, as currently done by __skb_wait_for_more_packets(). Fixes: 2b5cd0df ("net: Change return type of sk_busy_loop from bool to void") Reported-and-tested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Dmitry Bogdanov authored
[ Upstream commit a7faaa0c ] TCP/UDP checksum validity was propagated to skb only if IP checksum is valid. But for IPv6 there is no validity as there is no checksum in IPv6. This patch propagates TCP/UDP checksum validity regardless of IP checksum. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by:
Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit fae846e2 ] The device ID alone does not uniquely identify a device. Test both the vendor and device ID to make sure we don't mistakenly think some other vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device ID table. No functional change intended. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit bb9e5c5b ] The bug that Stan reported is as follows. After a restart, a 16-bit NIC may be incorrectly identified as a 32-bit NIC and stop working. mac8390 slot.E: Memory length resource not found, probing mac8390 slot.E: Farallon EtherMac II-C (type farallon) mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access. The bug never arises after a cold start and only intermittently after a warm start. (I didn't investigate why the bug is intermittent.) It turns out that memcpy_toio() is deprecated and memcmp_withio() also has issues. Replacing these calls with mmio accessors fixes the problem. Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f ("m68k: Mac DP8390 update") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Xin Long authored
[ Upstream commit 1c87e79a ] Jianlin reported a crash: [ 381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 [ 381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160 [ 382.009615] Call Trace: [ 382.020762] <IRQ> [ 382.030174] ip6_route_redirect.isra.52+0xc9/0xf0 [ 382.050984] ip6_redirect+0xb6/0xf0 [ 382.066731] icmpv6_notify+0xca/0x190 [ 382.083185] ndisc_redirect_rcv+0x10f/0x160 [ 382.102569] ndisc_rcv+0xfb/0x100 [ 382.117725] icmpv6_rcv+0x3f2/0x520 [ 382.133637] ip6_input_finish+0xbf/0x460 [ 382.151634] ip6_input+0x3b/0xb0 [ 382.166097] ipv6_rcv+0x378/0x4e0 It was caused by the lookup function __ip6_route_redirect() returns NULL in fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL. So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry instead of NULL. v1->v2: - move down 'fallback:' to make it more readable. Fixes: e873e4b9 ("ipv6: use fib6_info_hold_safe() when necessary") Reported-by:
Jianlin Shi <jishi@redhat.com> Suggested-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Matteo Croce authored
[ Upstream commit c22da366 ] Similarly to commit a7603ac1 ("geneve: change NET_UDP_TUNNEL dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which makes impossible to compile it if no other protocol depending on NET_UDP_TUNNEL is selected. Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from the select list, as it already depends on NET_UDP_TUNNEL. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit ceabee6c ] In genl_register_family(), when idr_alloc() fails, we forget to free the memory we possibly allocate for family->attrbuf. Reported-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e0aa6770 ] When a dual stack dccp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or inet6_iif() helper. Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6") Signed-off-by:
-
Corey Minyard authored
Backport from 41b766d6 When excuting a command like: modprobe ipmi_si ports=0xffc0e3 type=bt The system would get an oops. The trouble here is that ipmi_si_hardcode_find_bmc() is called before ipmi_si_platform_init(), but initialization of the hard-coded device creates an IPMI platform device, which won't be initialized yet. The real trouble is that hard-coded devices aren't created with any device, and the fixup is done later. So do it right, create the hard-coded devices as normal platform devices. This required adding some new resource types to the IPMI platform code for passing information required by the hard-coded device and adding some code to remove the hard-coded platform devices on module removal. To enforce the "hard-coded devices passed by the user take priority over firmware devices" rule, some special code was added to check and see if a hard-coded device already exists. The backport required some minor fixups and adding the device id table that had been added in another change and was used in this one. Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Cc: stable@vger.kernel.org # v4.15+ Signed-off-by:
Corey Minyard <cminyard@mvista.com> Tested-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Marcel Holtmann authored
commit 7c9cbd0b upstream. The function l2cap_get_conf_opt will return L2CAP_CONF_OPT_SIZE + opt->len as length value. The opt->len however is in control over the remote user and can be used by an attacker to gain access beyond the bounds of the actual packet. To prevent any potential leak of heap memory, it is enough to check that the resulting len calculation after calling l2cap_get_conf_opt is not below zero. A well formed packet will always return >= 0 here and will end with the length value being zero after the last option has been parsed. In case of malformed packets messing with the opt->len field the length value will become negative. If that is the case, then just abort and ignore the option. In case an attacker uses a too short opt->len value, then garbage will be parsed, but that is protected by the unknown option handling and also the option parameter size checks. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Reviewed-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Marcel Holtmann authored
commit af3d5d1c upstream. When doing option parsing for standard type values of 1, 2 or 4 octets, the value is converted directly into a variable instead of a pointer. To avoid being tricked into being a pointer, check that for these option types that sizes actually match. In L2CAP every option is fixed size and thus it is prudent anyway to ensure that the remote side sends us the right option size along with option paramters. If the option size is not matching the option type, then that option is silently ignored. It is a protocol violation and instead of trying to give the remote attacker any further hints just pretend that option is not present and proceed with the default values. Implementation following the specification and its qualification procedures will always use the correct size and thus not being impacted here. To keep the code readable and consistent accross all options, a few cosmetic changes were also required. Signed-off-by:
-
- 27 Mar, 2019 13 commits
-
-
Greg Kroah-Hartman authored
-
Baolin Wang authored
commit f25a646f upstream. Fix incorrect return value. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Hui Wang authored
commit b5a236c1 upstream. Recently we found the audio jack detection stop working after suspend on many machines with Realtek codec. Sometimes the audio selection dialogue didn't show up after users plugged headhphone/headset into the headset jack, sometimes after uses plugged headphone/headset, then click the sound icon on the upper-right corner of gnome-desktop, it also showed the speaker rather than the headphone. The root cause is that before suspend, the codec already call the runtime_suspend since this codec is not used by any apps, then in resume, it will not call runtime_resume for this codec. But for some realtek codec (so far, alc236, alc255 and alc891) with the specific BIOS, if it doesn't run runtime_resume after suspend, all codec functions including jack detection stop working anymore. This problem existed for a long time, but it was not exposed, that is because when problem happens, if users play sound or open sound-setting to check audio device, this will trigger calling to runtime_resume (via snd_hda_power_up), then the codec starts working again before users notice this problem. Since we don't know how many codec and BIOS combinations have this problem, to fix it, let the driver call runtime_resume for all codecs in pm_resume, maybe for some codecs, this is not needed, but it is harmless. After a codec is runtime resumed, if it is not used by any apps, it will be runtime suspended soon and furthermore we don't run suspend frequently, this change will not add much power consumption. Fixes: cc72da7d ("ALSA: hda - Use standard runtime PM for codec power-save control") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 98081ca6 upstream. Currently we deal with single codec and suspend codec callbacks for all S3, S4 and runtime PM handling. But it turned out that we want distinguish the call patterns sometimes, e.g. for applying some init sequence only at probing and restoring from hibernate. This patch slightly modifies the common PM callbacks for HD-audio codec and stores the currently processed PM event in power_state of the codec's device.power field, which is currently unused. The codec callback can take a look at this event value and judges which purpose it's being called. Signed-off-by:
-
Waiman Long authored
commit 71492580 upstream. Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning. Fix that by add a check for debug_locks at the beginning of __lock_downgrade(). Debugged-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jann Horn authored
commit ac5ceccc upstream. When the ORC unwinder is invoked for an oops caused by IP==0, it currently has no idea what to do because there is no debug information for the stack frame of NULL. But if RIP is NULL, it is very likely that the last successfully executed instruction was an indirect CALL/JMP, and it is possible to unwind out in the same way as for the first instruction of a normal function. Hardcode a corresponding ORC entry. With an artificially-added NULL call in prctl_set_seccomp(), before this patch, the trace is: Call Trace: ? __x64_sys_prctl+0x402/0x680 ? __ia32_sys_prctl+0x6e0/0x6e0 ? __do_page_fault+0x457/0x620 ? do_syscall_64+0x6d/0x160 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 After this patch, the trace looks like this: Call Trace: __x64_sys_prctl+0x402/0x680 ? __ia32_sys_prctl+0x6e0/0x6e0 ? __do_page_fault+0x457/0x620 do_syscall_64+0x6d/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 prctl_set_seccomp() still doesn't show up in the trace because for some reason, tail call optimization is only disabled in builds that use the frame pointer unwinder. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: syzbot <syzbot+ca95b2b7aef9e7cbd6ab@syzkaller.appspotmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20190301031201.7416-2-jannh@google.comSigned-off-by:
-
Jann Horn authored
commit f4f34e1b upstream. When the frame unwinder is invoked for an oops caused by a call to NULL, it currently skips the parent function because BP still points to the parent's stack frame; the (nonexistent) current function only has the first half of a stack frame, and BP doesn't point to it yet. Add a special case for IP==0 that calculates a fake BP from SP, then uses the real BP for the next frame. Note that this handles first_frame specially: Return information about the parent function as long as the saved IP is >=first_frame, even if the fake BP points below it. With an artificially-added NULL call in prctl_set_seccomp(), before this patch, the trace is: Call Trace: ? prctl_set_seccomp+0x3a/0x50 __x64_sys_prctl+0x457/0x6f0 ? __ia32_sys_prctl+0x750/0x750 do_syscall_64+0x72/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 After this patch, the trace is: Call Trace: prctl_set_seccomp+0x3a/0x50 __x64_sys_prctl+0x457/0x6f0 ? __ia32_sys_prctl+0x750/0x750 do_syscall_64+0x72/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
Dongli Zhang authored
commit f7c8a412 upstream. Commit 758a58d0 ("loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()") separates "lo->lo_backing_file = NULL" and "lo->lo_state = Lo_unbound" into different critical regions protected by loop_ctl_mutex. However, there is below race that the NULL lo->lo_backing_file would be accessed when the backend of a loop is another loop device, e.g., loop0's backend is a file, while loop1's backend is loop0. loop0's backend is file loop1's backend is loop0 __loop_clr_fd() mutex_lock(&loop_ctl_mutex); lo->lo_backing_file = NULL; --> set to NULL mutex_unlock(&loop_ctl_mutex); loop_set_fd() mutex_lock_killable(&loop_ctl_mutex); loop_validate_file() f = l->lo_backing_file; --> NULL access if loop0 is not Lo_unbound mutex_lock(&loop_ctl_mutex); lo->lo_state = Lo_unbound; mutex_unlock(&loop_ctl_mutex); lo->lo_backing_file should be accessed only when the loop device is Lo_bound. In fact, the problem has been introduced already in commit 7ccd0791 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") after which loop_validate_file() could see devices in Lo_rundown state with which it did not count. It was harmless at that point but still. Fixes: 7ccd0791 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") Reported-by: syzbot+9bdc1adc1c55e7fe765b@syzkaller.appspotmail.com Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Florian Westphal authored
commit d824548d upstream. They are however frequently triggered by syzkaller, so remove them. ebtables userspace should never trigger any of these, so there is little value in making them pr_debug (or ratelimited). Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Chao Yu authored
commit 48432984 upstream. Thread A Thread B - __fput - f2fs_release_file - drop_inmem_pages - mutex_lock(&fi->inmem_lock) - __revoke_inmem_pages - lock_page(page) - open - f2fs_setattr - truncate_setsize - truncate_inode_pages_range - lock_page(page) - truncate_cleanup_page - f2fs_invalidate_page - drop_inmem_page - mutex_lock(&fi->inmem_lock); We may encounter above ABBA deadlock as reported by Kyungtae Kim: I'm reporting a bug in linux-4.17.19: "INFO: task hung in drop_inmem_page" (no reproducer) I think this might be somehow related to the following: https://groups.google.com/forum/#!searchin/syzkaller-bugs/INFO$3A$20task$20hung$20in$20%7Csort:date/syzkaller-bugs/c6soBTrdaIo/AjAzPeIzCgAJ ========================================= INFO: task syz-executor7:10822 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D27024 10822 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 schedule_preempt_disabled+0x18/0x30 kernel/sched/core.c:3617 __mutex_lock_common kernel/locking/mutex.c:833 [inline] __mutex_lock+0x5bd/0x1410 kernel/locking/mutex.c:893 mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:908 drop_inmem_page+0xcb/0x810 fs/f2fs/segment.c:327 f2fs_invalidate_page+0x337/0x5e0 fs/f2fs/data.c:2401 do_invalidatepage mm/truncate.c:165 [inline] truncate_cleanup_page+0x261/0x330 mm/truncate.c:187 truncate_inode_pages_range+0x552/0x1610 mm/truncate.c:367 truncate_inode_pages mm/truncate.c:478 [inline] truncate_pagecache+0x6d/0x90 mm/truncate.c:801 truncate_setsize+0x81/0xa0 mm/truncate.c:826 f2fs_setattr+0x44f/0x1270 fs/f2fs/file.c:781 notify_change+0xa62/0xe80 fs/attr.c:313 do_truncate+0x12e/0x1e0 fs/open.c:63 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e459c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e45a6cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e45a700 INFO: task syz-executor7:10858 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D28880 10858 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 __rwsem_down_write_failed_common kernel/locking/rwsem-xadd.c:565 [inline] rwsem_down_write_failed+0x5e6/0xc90 kernel/locking/rwsem-xadd.c:594 call_rwsem_down_write_failed+0x17/0x30 arch/x86/lib/rwsem.S:117 __down_write arch/x86/include/asm/rwsem.h:142 [inline] down_write+0x58/0xa0 kernel/locking/rwsem.c:72 inode_lock include/linux/fs.h:713 [inline] do_truncate+0x120/0x1e0 fs/open.c:61 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e3b4c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e3b56cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071c238 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e3b5700 INFO: task syz-executor5:10829 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor5 D28760 10829 6308 0x80000002 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 io_schedule+0x21/0x80 kernel/sched/core.c:5179 wait_on_page_bit_common mm/filemap.c:1100 [inline] __lock_page+0x2b5/0x390 mm/filemap.c:1273 lock_page include/linux/pagemap.h:483 [inline] __revoke_inmem_pages+0xb35/0x11c0 fs/f2fs/segment.c:231 drop_inmem_pages+0xa3/0x3e0 fs/f2fs/segment.c:306 f2fs_release_file+0x2c7/0x330 fs/f2fs/file.c:1556 __fput+0x2c7/0x780 fs/file_table.c:209 ____fput+0x1a/0x20 fs/file_table.c:243 task_work_run+0x151/0x1d0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ba/0x30a0 kernel/exit.c:865 do_group_exit+0x13b/0x3a0 kernel/exit.c:968 get_signal+0x6bb/0x1650 kernel/signal.c:2482 do_signal+0x84/0x1b70 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x155/0x190 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x445/0x4e0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f1c68e74ce8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000071bf80 RCX: 00000000004497b9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000071bf80 RBP: 000000000071bf80 R08: 0000000000000000 R09: 000000000071bf58 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f1c68e759c0 R15: 00007f1c68e75700 This patch tries to use trylock_page to mitigate such deadlock condition for fix. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Myungho Jung authored
commit 5fc01fb8 upstream. If cma_acquire_dev_by_src_ip() returns error in addr_handler(), the device state changes back to RDMA_CM_ADDR_BOUND but the resolved source IP address is still left. After that, if rdma_destroy_id() is called after rdma_listen(), the device is freed without removed from listen_any_list in cma_cancel_operation(). Revert to the previous IP address if acquiring device fails. Reported-by: syzbot+f3ce716af730c8f96637@syzkaller.appspotmail.com Signed-off-by:
Myungho Jung <mhjungk@gmail.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Chris Wilson authored
commit 227ad6d9 upstream. Delay the drm_modeset_acquire_init() until after we check for an allocation failure so that we can return immediately upon error without having to unwind. WARNING: lock held when returning to user space! 4.20.0+ #174 Not tainted ------------------------------------------------ syz-executor556/8153 is leaving the kernel with locks still held! 1 lock held by syz-executor556/8153: #0: 000000005100c85c (crtc_ww_class_acquire){+.+.}, at: set_property_atomic+0xb3/0x330 drivers/gpu/drm/drm_mode_object.c:462 Reported-by: syzbot+6ea337c427f5083ebdf2@syzkaller.appspotmail.com Fixes: 144a7999 ("drm: Handle properties in the core for atomic drivers") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: <stable@vger.kernel.org> # v4.14+ Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181230122842.21917-1-chris@chris-wilson.co.ukSigned-off-by:
-
Kefeng Wang authored
commit 56897b21 upstream. task A: task B: hci_uart_set_proto flush_to_ldisc - p->open(hu) -> h5_open //alloc h5 - receive_buf - set_bit HCI_UART_PROTO_READY - tty_port_default_receive_buf - hci_uart_register_dev - tty_ldisc_receive_buf - hci_uart_tty_receive - test_bit HCI_UART_PROTO_READY - h5_recv - clear_bit HCI_UART_PROTO_READY while() { - p->open(hu) -> h5_close //free h5 - h5_rx_3wire_hdr - h5_reset() //use-after-free } It could use ioctl to set hci uart proto, but there is a use-after-free issue when hci_uart_register_dev() fail in hci_uart_set_proto(), see stack above, fix this by setting HCI_UART_PROTO_READY bit only when hci_uart_register_dev() return success. Reported-by: syzbot+899a33dc0fa0dbaf06a6@syzkaller.appspotmail.com Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
-
