- 06 Jan, 2009 40 commits
-
-
Alessandro Zummo authored
Fixes a few issues with the rtc-ds1216 driver - use rtc_valid_tm - use platform_driver_probe - fix init sequence - it was using rtc_unregister_driver where not needed. I also added resource_size and removed an useless pointer assignment. Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Tested-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Atsushi Nemoto authored
Add support for RTC in TX4939 SoC. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
-
Alessandro Zummo authored
Drivers should only need to implement either set_mmss (counter based RTCs) or set_time (most RTCs). The RTC subsystem will handle them appropriately. Signed-off-by:
-
Alessandro Zummo authored
- no changelogs in code - no banners - use local buffers - fix probe sequence - do not init .driver.bus Signed-off-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Alessandro Zummo authored
- no changelogs in code - no banners - use local buffers - fix probe sequence - fixed style issues - fix spi_write call - removed old debug code replaces http://patchwork.ozlabs.org/patch/9421/ and http://patchwork.ozlabs.org/patch/9455/Signed-off-by:
-
Manuel Lauss authored
Simple driver which uses the Au1xxx Time-Of-Year counter (counter0) as a 1Hz RTC. [akpm@linux-foundation.org: repair Kconfig] Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Acked-by:
-
Alessandro Zummo authored
Remove double spaces and adds some suggestions. It also fixes the descriptions of options that are no more available as modules. Signed-off-by:
-
Alessandro Zummo authored
Small fixes for the ds1390 driver - fixed initialization of the spi device - added missing includes - removed printks - removed useless wrappers for rtc ops - removed dead code Signed-off-by:
-
Alessandro Zummo authored
Small fixes for the pxa27x/pxa3xx driver - use platform_driver_probe - fixed exit paths - fixed probe sequence - added missing include - using linux/io.h instead of asm/io.h Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Robert Jarzmik authored
With PXA27x and above, a new RTC hardware block was added in addition to the legacy one which is also found on the SA1100 SOC family. This second RTC block is called "wristwatch" and "periodic interrupt" and works independently from the other RTC block. The driver offers provides : - a 1Hz ticking clock - a periodic alarm, in the 1Hz to 1000Hz range - a one shot alarm Signed-off-by:
-
Jonathan Cameron authored
Move the power of 2 check on frequencies down into individual rtc drivers This is to allow for non power of 2 real time clock periodic interrupts such as those on the pxa27x to be found in the new pxa27x-rtc driver Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Anton Vorontsov authored
This patch fixes a bunch of irq checking misuses. Most drivers were getting irq via platform_get_irq(), which returns -ENXIO or r->start. rtc-cmos.c is special. It is using PNP and platform bindings. Hopefully nobody is using PNP IRQ 0 for RTC. So the changes should be safe. rtc-sh.c is using platform_get_irq, but was storing a result into an unsigned type, then was checking for < 0. This is fixed now. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Kay Sievers authored
Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Mike Frysinger authored
Blackfin platforms do not support the hardware which this driver drives. Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Acked-by:
-
Ian Kent authored
In function validate_dev_ioctl() we check that the string we've been sent is a valid path. The function that does this check assumes the string is NULL terminated but our NULL termination check isn't done until after this call. This patch changes the order of the check. Signed-off-by:
Ian Kent <raven@themaw.net> Acked-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Ian Kent authored
- the type assigned at mount when no type is given is changed from 0 to AUTOFS_TYPE_INDIRECT. This was done because 0 and AUTOFS_TYPE_INDIRECT were being treated implicitly as the same type. - previously, an offset mount had it's type set to AUTOFS_TYPE_DIRECT|AUTOFS_TYPE_OFFSET but the mount control re-implementation needs to be able distinguish all three types. So this was changed to make the type setting explicit. - a type AUTOFS_TYPE_ANY was added for use by the re-implementation when checking if a given path is a mountpoint. It's not really a type as we use this to ask if a given path is a mountpoint in the autofs_dev_ioctl_ismountpoint() function. - functions to set and test the autofs mount types have been added to improve readability and make the type usage explicit. - the mount type is used from user space for the mount control re-implementtion so, for consistency, all the definitions have been moved to the user space include file include/linux/auto_fs4.h. Signed-off-by:
-
Ian Kent authored
A local definition of devid in autofs_dev_ioctl_ismountpoint() shadows the fuction wide definition. Signed-off-by:
-
Ian Kent authored
The parameter usage in the device node ioctl code uses arg1 and arg2 as parameter names. This patch redefines the parameter names to reflect what they actually are in an effort to make the code more readable. Signed-off-by:
-
Qinghuang Feng authored
Arguments lower_dentry and ecryptfs_dentry in ecryptfs_create_underlying_file() have been merged into dentry, now fix it. Signed-off-by:
Qinghuang Feng <qhfeng.kernel@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
Flesh out the comments for ecryptfs_decode_from_filename(). Remove the return condition, since it is always 0. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Cc: Dustin Kirkland <dustin.kirkland@gmail.com> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Tyler Hicks <tchicks@us.ibm.com> Cc: David Kleikamp <shaggy@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
Kerneldoc updates for ecryptfs_parse_tag_70_packet(). Signed-off-by:
-
Michael Halcrow authored
Correct several format string data type specifiers. Correct filename size data types; they should be size_t rather than int when passed as parameters to some other functions (although note that the filenames will never be larger than int). Signed-off-by:
-
Michael Halcrow authored
%Z is a gcc-ism. Using %z instead. Signed-off-by:
-
Michael Halcrow authored
Enable mount-wide filename encryption by providing the Filename Encryption Key (FNEK) signature as a mount option. Note that the ecryptfs-utils userspace package versions 61 or later support this option. When mounting with ecryptfs-utils version 61 or later, the mount helper will detect the availability of the passphrase-based filename encryption in the kernel (via the eCryptfs sysfs handle) and query the user interactively as to whether or not he wants to enable the feature for the mount. If the user enables filename encryption, the mount helper will then prompt for the FNEK signature that the user wishes to use, suggesting by default the signature for the mount passphrase that the user has already entered for encrypting the file contents. When not using the mount helper, the user can specify the signature for the passphrase key with the ecryptfs_fnek_sig= mount option. This key must be available in the user's keyring. The mount helper usually takes care of this step. If, however, the user is not mounting with the mount helper, then he will need to enter the passphrase key into his keyring with some other utility prior to mounting, such as ecryptfs-manager. Signed-off-by:
-
Michael Halcrow authored
Make the requisite modifications to ecryptfs_filldir(), ecryptfs_lookup(), and ecryptfs_readlink() to call out to filename encryption functions. Propagate filename encryption policy flags from mount-wide crypt_stat to inode crypt_stat. Signed-off-by:
-
Michael Halcrow authored
These functions support encrypting and encoding the filename contents. The encrypted filename contents may consist of any ASCII characters. This patch includes a custom encoding mechanism to map the ASCII characters to a reduced character set that is appropriate for filenames. Signed-off-by:
-
Michael Halcrow authored
Extensions to the header file to support filename encryption. Signed-off-by:
-
Michael Halcrow authored
This patchset implements filename encryption via a passphrase-derived mount-wide Filename Encryption Key (FNEK) specified as a mount parameter. Each encrypted filename has a fixed prefix indicating that eCryptfs should try to decrypt the filename. When eCryptfs encounters this prefix, it decodes the filename into a tag 70 packet and then decrypts the packet contents using the FNEK, setting the filename to the decrypted filename. Both unencrypted and encrypted filenames can reside in the same lower filesystem. Because filename encryption expands the length of the filename during the encoding stage, eCryptfs will not properly handle filenames that are already near the maximum filename length. In the present implementation, eCryptfs must be able to produce a match against the lower encrypted and encoded filename representation when given a plaintext filename. Therefore, two files having the same plaintext name will encrypt and encode into the same lower filename if they are both encrypted using the same FNEK. This can be changed by finding a way to replace the prepended bytes in the blocked-aligned filename with random characters; they are hashes of the FNEK right now, so that it is possible to deterministically map from a plaintext filename to an encrypted and encoded filename in the lower filesystem. An implementation using random characters will have to decode and decrypt every single directory entry in any given directory any time an event occurs wherein the VFS needs to determine whether a particular file exists in the lower directory and the decrypted and decoded filenames have not yet been extracted for that directory. Thanks to Tyler Hicks and David Kleikamp for assistance in the development of this patchset. This patch: A tag 70 packet contains a filename encrypted with a Filename Encryption Key (FNEK). This patch implements functions for writing and parsing tag 70 packets. This patch also adds definitions and extends structures to support filename encryption. Signed-off-by:
-
Randy Dunlap authored
Remove excess kernel-doc function parameter notation from i2o/. Warning(drivers/message/i2o/iop.c:64): Excess function parameter 'msg' description in 'i2o_msg_get_wait' Warning(drivers/message/i2o/device.c:62): Excess function parameter 'drv' description in 'i2o_device_claim' Warning(drivers/message/i2o/device.c:95): Excess function parameter 'drv' description in 'i2o_device_claim_release' Warning(drivers/message/i2o/driver.c:186): Excess function parameter 'msg' description in 'i2o_driver_dispatch' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Masami Hiramatsu authored
Allow kprobes to probe module __init routines. When __init functions are freed, kprobes which probe those functions are set to "Gone" flag. These "Gone" probes are disarmed from the code and never be enabled. Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
Masami Hiramatsu authored
Add a module notifier call which notifies that the state of a module changes from MODULE_STATE_COMING to MODULE_STATE_LIVE. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Masami Hiramatsu authored
Remove called_from argument from kprobes which had been used for preventing self-refering of kernel module. However, since we don't keep module's refcount after registering kprobe any more, there is no reason to check that. This patch also simplifies registering/unregistering functions because we don't need to use __builtin_return_address(0) which was passed to called_from. [ananth@in.ibm.com: build fix] Signed-off-by:
-
Masami Hiramatsu authored
Allows kprobes to probe __exit routine. This adds flags member to struct kprobe. When module is freed(kprobes hooks module_notifier to get this event), kprobes which probe the functions in that module are set to "Gone" flag to the flags member. These "Gone" probes are never be enabled. Users can check the GONE flag through debugfs. This also removes mod_refcounted, because we couldn't free a module if kprobe incremented the refcount of that module. [akpm@linux-foundation.org: document some locking] [mhiramat@redhat.com: bugfix: pass aggr_kprobe to arch_remove_kprobe] [mhiramat@redhat.com: bugfix: release old_p's insn_slot before error return] Signed-off-by:
-
Masami Hiramatsu authored
Add __kprobes to kprobes internal functions for protecting from probing by kprobes itself. Signed-off-by:
-
Masami Hiramatsu authored
Add kprobe_insn_mutex for protecting kprobe_insn_pages hlist, and remove kprobe_mutex from architecture dependent code. This allows us to call arch_remove_kprobe() (and free_insn_slot) while holding kprobe_mutex. Signed-off-by:
-
Masami Hiramatsu authored
This series of patches allows kprobes to probe module's __init and __exit functions. This means, you can probe driver initialization and terminating. Currently, kprobes can't probe __init function because these functions are freed after module initialization. And it also can't probe module __exit functions because kprobe increments reference count of target module and user can't unload it. this means __exit functions never be called unless removing probes from the module. To solve both cases, this series of patches introduces GONE flag and sets it when the target code is freed(for this purpose, kprobes hooks MODULE_STATE_* events). This also removes refcount incrementing for allowing user to unload target module. Users can check which probes are GONE by debugfs interface. For taking timing of freeing module's .init text, these also include a patch which adds module's notifier of MODULE_STATE_LIVE event. This patch: Add within_module_core() and within_module_init() for checking whether an address is in the module .init.text section or .text section, and replace within() local inline functions in kernel/module.c with them. kprobes uses these functions to check where the kprobe is inserted. Signed-off-by:
-
Masami Hiramatsu authored
Add testcases for *probe batch registration (register_kprobes) to kprobes sanity tests. Signed-off-by:
-
Masami Hiramatsu authored
Call kprobe_target indirectly. This prevents gcc to unroll a noinline function in caller function. I ported patches which had been discussed on http://sources.redhat.com/bugzilla/show_bug.cgi?id=3542Signed-off-by:
-
Masami Hiramatsu authored
When someone called register_*probe() from kernel-core code(not from module) and that probes a kernel module, users can remove the probed module because kprobe doesn't increment reference counter of the module. (on the other hand, if the kernel-module calls register_*probe, kprobe increments refcount of the probed module.) Currently, we have no register_*probe() calling from kernel-core(except smoke-test, but the smoke-test doesn't probe module), so there is no real bugs. But the logic is wrong(or not fair) and it can causes a problem when someone might want to probe module from kernel. After this patch is applied, even if someone put register_*probe() call in the kernel-core code, it increments the reference counter of the probed module, and it prevents user to remove the module until stopping probing it. Signed-off-by:
-
Julia Lawall authored
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
-
