- 15 Jan, 2021 11 commits
-
-
Matthew Auld authored
Give more flexibility to the caller, if they already have an allocated object, in case they wish to apply some transformation to the object prior to handing it over to the region specific initialisation step, like in gem_create_ext where we would like to first apply the extensions to the object. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Matthew Auld authored
Depending on the regions min_page_size we might need to adjust the object size, ensure this matches our expectations. Suggested-by:
-
Matthew Auld authored
In preparation for gem_create_ext break out the gem_create uAPI, so that we don't clutter i915_gem.c once we start adding various extensions Signed-off-by:
-
Chris Wilson authored
Avoid the full blown memory barrier of test_and_set_bit() by noting the completed request and removing it from the lists. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
Take a snapshot of the ctx->engines, so we can avoid taking the ctx->engines_mutex for a mere read in get_engines(). Signed-off-by:
-
Chris Wilson authored
When cloning the engines from the source context, we need to ensure that the engines are not freed as we copy them, and that the flags we clone from the source correspond with the engines we copy across. To do this we need only take a reference to the src->engines, rather than hold the src->engine_mutex, so long as we verify that nothing changed under the read. Signed-off-by:
-
Chris Wilson authored
Originally, we used the signal->lock as a means of following the previous link in its timeline and peeking at the previous fence. However, we have replaced the explicit serialisation with a series of very careful probes that anticipate the links being deleted and the fences recycled before we are able to acquire a strong reference to it. We do not need the signal->lock crutch anymore, nor want the contention. Signed-off-by:
-
Chris Wilson authored
When we know that we are inside the timeline mutex, or inside the submission flow (under active.lock or the holder's rcu lock), we know that the rq->hwsp is stable and we can use the simpler direct version. Signed-off-by:
-
Joonas Lahtinen authored
Backmerging to get a common base for merging topic branches between drm-intel-next and drm-intel-gt-next. Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-01-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko) Avoid relying on last item ABI marker in i915_drm.h, add a comment to mark as deprecated. Cross-subsystem Changes: Core Changes: Driver Changes: - Restore clear residuals security mitigations for Ivybridge and Baytrail (Chris) - Close #1858: Allow sysadmin to choose applied GPU security mitigations through i915.mitigations=... similar to CPU (Chris) - Fix for #2024: GPU hangs on HSW GT1 (Chris) - Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville) - Fix for #2797: False positive GuC loading error message (Chris) - Fix for #2859: Missing GuC firmware for older Cometlakes (Chris) - Lessen probability of GPU hang due to DMAR faults [reason 7, next page table ptr is invalid] on Tigerlake (Chris) - Fix REVID macros for TGL to fetch correct stepping (Aditya) - Limit frequency drop to RPe on parking (Chris, Edward) - Limit W/A 1406941453 to TGL, RKL and DG1 (Swathi) - Make W/A 22010271021 permanent on DG1 (Lucas) - Implement W/A 16011163337 to prevent a HS/DS hang on DG1 (Swathi) - Only disable preemption on gen8 render engines (Chris) - Disable arbitration around Braswell's PDP updates (Chris) - Disable arbitration on no-preempt requests (Chris) - Check for arbitration after writing start seqno before busywaiting (Chris) - Retain default context state across shrinking (Venkata, CQ) - Fix mismatch between misplaced vma check and vma insert for 32-bit addressing userspaces (Chris, CQ) - Propagate error for vmap() failure instead kernel NULL deref (Chris) - Propagate error from cancelled submit due to context closure immediately (Chris) - Fix RCU race on HWSP tracking per request (Chris) - Clear CMD parser shadow and GPU reloc batches (Matt A) - Populate logical context during first pin (Maarten) - Optimistically prune dma-resv from the shrinker (Chris) - Fix for virtual engine ownership race (Chris) - Remove timeslice suppression to restore fairness for virtual engines (Chris) - Rearrange IVB/HSW workarounds properly between GT and engine (Chris) - Taint the reset mutex with the shrinker (Chris) - Replace direct submit with direct call to tasklet (Chris) - Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris) - Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko) - Use raw clock for RC6 time estimation in PMU (Tvrtko) - Differentiate OOM failures from invalid map types (Chris) - Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris) - Ignore repeated attempts to suspend request flow across reset (Chris) - Remove livelock from "do_idle_maps" VT-d W/A (Chris) - Cancel the preemption timeout early in case engine reset fails (Chris) - Code flow optimization in the scheduling code (Chris) - Clear the execlists timers upon reset (Chris) - Drain the breadcrumbs just once (Chris, Matt A) - Track the overall GT awake/busy time (Chris) - Tweak submission tasklet flushing to avoid starvation (Chris) - Track timelines created using the HWSP to restore on resume (Chris) - Use cmpxchg64 for 32b compatilibity for active tracking (Chris) - Prefer recycling an idle GGTT fence to avoid GPU wait (Chris) - Restructure GT code organization for clearer split between GuC and execlists (Chris, Daniele, John, Matt A) - Remove GuC code that will remain unused by new interfaces (Matt B) - Restructure the CS timestamp clocks code to local to GT (Chris) - Fix error return paths in perf code (Zhang) - Replace idr_init() by idr_init_base() in perf (Deepak) - Fix shmem_pin_map error path (Colin) - Drop redundant free_work worker for GEM contexts (Chris, Mika) - Increase readability and understandability of intel_workarounds.c (Lucas) - Defer enabling the breadcrumb interrupt to after submission (Chris) - Deal with buddy alloc block sizes beyond 4G (Venkata, Chris) - Encode fence specific waitqueue behaviour into the wait.flags (Chris) - Don't cancel the breadcrumb interrupt shadow too early (Chris) - Cancel submitted requests upon context reset (Chris) - Use correct locks in GuC code (Tvrtko) - Prevent use of engine->wa_ctx after error (Chris, Matt R) - Fix build warning on 32-bit (Arnd) - Avoid memory leak if platform would have more than 16 W/A (Tvrtko) - Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko) - Improve debugging output (Chris, Tvrtko, Matt R) - Make file local variables static (Jani) - Avoid uint*_t types in i915 (Jani) - Selftest improvements (Chris, Matt A, Dan) - Documentation fixes (Chris, Jose) Signed-off-by:
Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/gt/intel_breadcrumbs.c # drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h # drivers/gpu/drm/i915/gt/intel_lrc.c # drivers/gpu/drm/i915/gvt/mmio_context.h # drivers/gpu/drm/i915/i915_drv.h From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
- PSR fixes and improvements for selective fetch (Jose) - GVT build fixed and cleanup (Jani) - RKL display fixes (Lee, Matt) - DSI fix (Hans) - Panel Power and Backlight fixes (Anshuman, Jani) - RPM fix (Chris) - Fix HTI port checking (Jose) - Clean-up in cursor code (Ville) - Once again, trying to use fast+narrow link on eDP (Ville) - DG1 display fix (Matt) Signed-off-by:
-
- 14 Jan, 2021 7 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.12-2021-01-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.12-2021-01-08: amdgpu: - Rework IH ring handling on vega and navi - Rework HDP handling for vega and navi - swSMU documenation updates - Overdrive support for Sienna Cichlid and newer asics - swSMU updates for vangogh - swSMU updates for renoir - Enable FP16 on DCE8-11 - Misc code cleanups and bug fixes radeon: - Fixes for platforms that can't access PCI resources correctly - Misc code cleanups From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108221811.3868-1-alexander.deucher@amd.comSigned-off-by:
-
Chris Wilson authored
Remove all the manual inlines from non-critical sections in gt/ add/remove: 2/0 grow/shrink: 0/3 up/down: 762/-1473 (-711) Function old new delta mi_set_context.isra - 602 +602 write_dma_entry - 160 +160 __set_pd_entry 214 69 -145 clear_pd_entry 190 42 -148 ring_request_alloc 2021 841 -1180 Total: Before=1605086, After=1604375, chg -0.04% Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210113152224.29794-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Remove the extraneous inlines. The only split by the compiler that looked dubious was execlists_schedule_out, so push the code around slightly to move all the work into the out-of-line function. In a normal build, bloat-o-meter shows that only the execlists_schedule_out is contentious: add/remove: 1/0 grow/shrink: 0/2 up/down: 803/-1532 (-729) Function old new delta __execlists_schedule_out - 803 +803 execlists_submission_tasklet 6488 5766 -722 execlists_reset_csb.constprop 1587 777 -810 Total: Before=1605815, After=1605086, chg -0.05% Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210113151112.15212-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The GFX_MODE is reset along with the engine, turning off ppGTT. We need to re-enable it upon resume afterwards. Signed-off-by:
-
Jani Nikula authored
Always prefer the kernel types over stdint types in i915. Reviewed-by:
-
Chris Wilson authored
Some rcs0 workarounds were being incorrectly applied to the GT, and so we failed to restore the expected register settings after a reset. Signed-off-by:
-
Chris Wilson authored
Some rcs0 workarounds were being incorrectly applied to the GT, and so we failed to restore the expected register settings after a reset. Signed-off-by:
-
- 13 Jan, 2021 7 commits
-
-
Chris Wilson authored
In the legacy ringbuffer submission, we still had an open-coded version of intel_engine_stop_cs() with one additional verification step. Transfer that verification to intel_engine_stop_cs() itself, and call it. Signed-off-by:
-
Chris Wilson authored
Since we are system_highpri_wq, we expected the heartbeat to be scheduled promptly. However, we see delays of over 10ms upsetting our assertions. Accept this as inevitable and bump the minimum error threshold to 20ms (from 6 jiffies). <6> [616.784749] rcs0: Heartbeat delay: 3570us [2802, 9188] <6> [616.807790] bcs0: Heartbeat delay: 2111us [745, 4372] <6> [616.853776] vcs0: Heartbeat delay: 6485us [2424, 11637] <3> [616.859296] vcs0: Heartbeat delay was 6485us, expected less than 6000us <3> [616.860901] i915/intel_heartbeat_live_selftests: live_heartbeat_fast failed with error -22 v2: More context from CI. Signed-off-by:
-
Chris Wilson authored
Inject a fault into the engine reset and check that the outstanding requests are completed despite the failed reset. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Initialize all required entries from guc_set_default_submission, instead of calling the execlists function. The previously inherited setup has been copied over from the execlist code and simplified by removing the execlists submission-specific parts. v2: move setting of relative_mmio flag to engine_setup_common (Chris) Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1 Signed-off-by:
-
Daniele Ceraolo Spurio authored
Instead of starting the engine in execlists submission mode and then switching to GuC, start directly in GuC submission mode. The initial setup functions have been copied over from the execlists code and simplified by removing the execlists submission-specific parts. v2: remove unneeded unexpected starting state check (Chris) Signed-off-by:
-
Daniele Ceraolo Spurio authored
GuC owns the execlists state and the context IDs used for submission, so the status of the ports and the CSB entries are not something we control or can decode from the i915 side, therefore we can avoid dumping it. A follow-up patch will also stop setting the csb pointers when using GuC submission. GuC dumps all the required events in the GuC logs when verbosity is set high enough. Signed-off-by:
-
Matthew Brost authored
Delete GuC code unused in future patches that rewrite the GuC interface to work with the new firmware. Most of the code deleted relates to workqueues or execlist port. The code is safe to remove because we still don't allow GuC submission to be enabled, even when overriding the modparam, so it currently can't be reached. The defines + structs for the process descriptor and workqueue remain. Although the new GuC interface does not require either of these for the normal submission path multi-lrc submission does. The usage of the process descriptor and workqueue for multi-lrc will be quite different from the code that is deleted in this patch. A future patch will implement multi-lrc submission. v2: add a code in the commit message about the code being safe to remove (Chris) Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
- 12 Jan, 2021 11 commits
-
-
Matthew Auld authored
Device local-memory should be thought of as part the GT, which means it should also sit under gt/. Suggested-by:
-
Jani Nikula authored
There are no users outside of intel_region_lmem.c. Signed-off-by:
-
Jani Nikula authored
There are no users outside of intel_memory_region.c. Signed-off-by:
-
Chris Wilson authored
During igt_reset_nop_engine, it was observed that an unexpected failed engine reset lead to us busywaiting on the stop-ring semaphore (set during the reset preparations) on the first request afterwards. There was no explicit MI_ARB_CHECK in this sequence as the presumption was that the failed MI_SEMAPHORE_WAIT would itself act as an arbitration point. It did not in this circumstance, so force it. This patch is based on the assumption that the MI_SEMAPHORE_WAIT failure to arbitrate is a rare Tigerlake bug, similar to the lite-restore vs semaphore issues previously seen in the CS. The explicit MI_ARB_CHECK should always ensure that there is at least one arbitration point in the request before the MI_SEMAPHORE_WAIT to trigger the IDLE->ACTIVE event. Upon processing that event, we will clear the stop-ring flag and release the semaphore from its busywait. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210112100759.32698-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
On the off chance that we need to arbitrate before launching the payload, perform the check after we signal the request is ready to start. Assuming instantaneous processing of the CS event, the request will then be treated as having started when we make the decisions as to how to process that CS event. v2: More commentary about the users of i915_request_started() as a reminder about why we are marking the initial breadcrumb. Signed-off-by:
-
Chris Wilson authored
A new fi-cml-dallium CI machine has 8G and apparently plenty free, yet fails some selftests with ENOMEM. The failures all seem to be from huge_gem_object which does not try very hard to allocate memory, skipping reclaim entirely. Let's try a bit harder and direct reclaim before failing. Signed-off-by:
-
Chris Wilson authored
If this stolen object holds the last reference to the region, we need to remove our drm_mm_node before freeing the region's drm_mm. <4> [431.679591] Memory manager not clean during takedown. <4> [431.679633] WARNING: CPU: 0 PID: 110 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x51/0x100 <4> [431.679655] Modules linked in: i915 vgem btusb snd_hda_codec_hdmi btrtl btbcm btintel snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio bluetooth coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ecdh_generic ecc r8169 realtek lpc_ich snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_cherryview prime_numbers [last unloaded: i915] <4> [431.679883] CPU: 0 PID: 110 Comm: kworker/u4:3 Tainted: G U 5.11.0-rc3-CI-CI_DRM_9583+ #1 <4> [431.679895] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0058.2016.1102.1842 11/02/2016 <4> [431.679905] Workqueue: i915 __i915_gem_free_work [i915] <4> [431.680831] RIP: 0010:drm_mm_takedown+0x51/0x100 <4> [431.680850] Code: 44 24 08 65 48 33 04 25 28 00 00 00 0f 85 b6 00 00 00 48 83 c4 10 5b 5d 41 5c c3 48 89 fb 48 c7 c7 c8 b7 38 82 e8 00 d6 37 00 <0f> 0b 48 8b 3d 96 d5 d1 00 ba 00 10 00 00 be c0 0c 00 00 e8 d7 64 <4> [431.680862] RSP: 0018:ffffc90000ad7dc0 EFLAGS: 00010282 <4> [431.680879] RAX: 0000000000000000 RBX: ffff8881109aa140 RCX: 0000000000000001 <4> [431.680888] RDX: 0000000080000001 RSI: ffffffff8235a70f RDI: 00000000ffffffff <4> [431.680897] RBP: ffff8881109aa178 R08: 0000000000000001 R09: 0000000000000001 <4> [431.680906] R10: 0000000025eaec48 R11: 00000000f5b271a7 R12: ffff88810a38ddc0 <4> [431.680916] R13: 00000000ffffffff R14: ffffffff82861b70 R15: ffff88810b715538 <4> [431.680925] FS: 0000000000000000(0000) GS:ffff88817b800000(0000) knlGS:0000000000000000 <4> [431.680935] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [431.680945] CR2: 000056377cfd7c48 CR3: 00000001045de000 CR4: 00000000001006f0 <4> [431.680954] Call Trace: <4> [431.680977] __intel_memory_region_destroy+0x24/0x50 [i915] <4> [431.681340] i915_gem_object_release_stolen+0x26/0x40 [i915] <4> [431.681637] __i915_gem_free_objects.isra.21+0x1ef/0x3b0 [i915] <4> [431.681935] process_one_work+0x270/0x5c0 <4> [431.682022] worker_thread+0x37/0x380 <4> [431.682047] ? process_one_work+0x5c0/0x5c0 <4> [431.682062] kthread+0x146/0x170 <4> [431.682077] ? kthread_park+0x80/0x80 <4> [431.682098] ret_from_fork+0x22/0x30 <4> [431.682153] irq event stamp: 1872905 <4> [431.682162] hardirqs last enabled at (1872911): [<ffffffff8112bd9a>] console_unlock+0x49a/0x580 <4> [431.682176] hardirqs last disabled at (1872916): [<ffffffff8112bd06>] console_unlock+0x406/0x580 <4> [431.682187] softirqs last enabled at (1872850): [<ffffffff81e00342>] __do_softirq+0x342/0x48e <4> [431.682201] softirqs last disabled at (1872845): [<ffffffff81c00f52>] asm_call_irq_on_stack+0x12/0x20 <4> [431.682214] ---[ end trace 5d3bcd818e2e3816 ]--- <3> [431.686188] [drm:drm_mm_takedown] *ERROR* node [0002d000 + 00004000]: inserted at drm_mm_insert_node_in_range+0x34a/0x5b0 i915_gem_stolen_insert_node_in_range+0x7b/0xa0 [i915] _i915_gem_object_create_stolen+0x83/0xd0 [i915] i915_gem_object_create_region+0x61/0x140 [i915] intel_engine_create_ring+0x176/0x230 [i915] Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2927Signed-off-by:
-
Chris Wilson authored
The clear-residuals mitigation is a relatively heavy hammer and under some circumstances the user may wish to forgo the context isolation in order to meet some performance requirement. Introduce a generic module parameter to allow selectively enabling/disabling different mitigations. To disable just the clear-residuals mitigation (on Ivybridge, Baytrail, or Haswell) use the module parameter: i915.mitigations=auto,!residuals Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858 Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by:
Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
The mitigation is required for all gen7 platforms, now that it does not cause GPU hangs, restore it for Ivybridge and Baytrail. Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by:
-
Chris Wilson authored
MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the range [0, n-1] where n is #EU * (#threads/EU) with the number of threads based on plaform and the number of EU based on the number of slices and subslices. This is a fixed number per platform/gt, so appropriately limit the number of threads we spawn to match the device. v2: Oversaturate the system with tasks to force execution on every HW thread; if the thread idles it is returned to the pool and may be reused again before an unused thread. v3: Fix more state commands, which was causing Baytrail to barf. v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024 Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by:
-
Matt Roper authored
DG1's vswing tables are the same for eDP and HDMI but have slight differences from ICL/TGL for DP. v2: - Use a "_hbr2_hbr3" suffix on the table name to make it more clear that the same table is used for both HBR2 and HBR3 link rates. (Swathi) Bspec: 49291 Cc: Clinton Taylor <Clinton.A.Taylor@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108222528.1954514-1-matthew.d.roper@intel.comReviewed-by:
Clint Taylor <Clinton.A.Taylor@intel.com>
-
- 11 Jan, 2021 4 commits
-
-
Chris Wilson authored
During igt_reset_nop_engine, an engine reset unexpectedly failed. For the next time this happens, mention which engine that was. Signed-off-by:
-
Chris Wilson authored
Braswell's pdp workaround is full of dragons, that may be being angered when they are interrupted. Let's not take that risk and disable arbitration during the update. Signed-off-by:
-
Ville Syrjälä authored
Some new eDP panels don't like to operate at the max parameters, and instead we need to go for an optimal confiugration. That unfortunately doesn't work with older eDP panels which are generally only guaranteed to work at the max parameters. To solve these two conflicting requirements let's start with the optimal setup, and if that fails we start again with the max parameters. The downside is probably an extra modeset when we switch strategies but I don't see a good way to avoid that. For a bit of history we first tried to go for the fast+narrow in commit 7769db58 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow"). but that had to be reverted due to regression on older panels in commit f11cb1c1 ("drm/i915/dp: revert back to max link rate and lane count on eDP"). So now we try to get the best of both worlds by using both strategies. v2: Deal with output_bpp and uapi vs. hw state split Reword some comments v3: Rebase Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Albert Astals Cid <aacid@kde.org> # v5.0 backport Cc: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport Cc: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=105267 References: https://bugs.freedesktop.org/show_bug.cgi?id=109959 References: https://gitlab.freedesktop.org/drm/intel/issues/272Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210107182026.24848-1-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Eliminate checkpatch warnings from intel_cursor.c: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Possible repeated word: 'by' Signed-off-by:
-
