- 08 May, 2007 40 commits
-
-
Pavel Emelianov authored
If the thread failed to create the subsequent wait_event will hang forever. This is likely to happen if kernel hits max_threads limit. Will be critical for virtualization systems that limit the number of tasks and kernel memory usage within the container. (akpm: JBD should be converted fully to the kthread API: kthread_should_stop() and kthread_stop()). Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Miklos Szeredi authored
There's a missing check for CAP_SYS_ADMIN in do_change_type(). Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Egmont Koblinger authored
The UTF-8 part of the vt driver suffers from the following issues which are addressed in my patch: 1) If there's no glyph found for a particular valid UTF-8 character, we try to display U+FFFD. However if this one is not found either, here's what the current kernel does: - First, if the Unicode value is less than the number of glyphs, use the glyph directly from that position of the glyph table. While it may be a good idea in the 8-bit world, it has absolutely no sense with Unicode in mind. For example, if a Latin-2 font is loaded and an application prints U+00FB ("u with circumflex", not present in Latin-2) then as a fallback solution the glyph from the 0xFB position of the Latin-2 fontset (which is an "u with double accent" - a different character) is displayed. - Second, if this fallback fails too, a simple ASCII question mark is printed, which is visually undistinguishable from a real question mark. I changed the code to skip the first step (except if in non-UTF-8 mode), and changed the second step to print the question mark with inverse color attributes, so it is visually clear that it's not a real question mark, and resembles more to the common glyph of U+FFFD. 2) The UTF-8 decoder is buggy in many ways: - Lone continuation bytes (section 3.1 of Markus Kuhn's UTF-8 stress test) are not caught, they are displayed as some "random" (taken directly form the font table, see above) glyphs instead the replacement character. - Incomplete sequences (sections 3.2 and 3.3 of the stress test) emit no replacement character, but rather cause the subsequent valid character to be displayed more times(!). - The decoder is not safe: overlong sequences are not caught currently, they are displayed as if these were valid representations. This may even have security impacts. - The decoder does not handle D800..DFFF and FFFE..FFFF specially, it just emits these code points and lets it be looked up in the glyph table. Since these are invalid code points, I replace them by U+FFFD and hence give no chance for them to be looked up in the glyph table. (Assuming no font ships glyphs for these code points, this change is not visible to the users since the glyph shown will be the same.) With my fixes to the decoder it now behaves exactly as Markus Kuhn's stress test recommends. 3) It has no concept of double-width (CJK) characters. It's way beyond the scope of my patch to try to display them, but at least I think it's important for the cursor to jump two positions when printing such characters, since this is what applications (such as text editors) expect. Currently the cursor only jumps one position, and hence applications suffer from displaying and refreshing problems, and editing some English letters that are preceded by some CJK characters in the same line is a nightmare. With my patch an additional space is inserted after the CJK character has been printed (which usually means a replacement symbol of course). (If U+FFFD isn't availble and hence an inverse question mark is displayed in the first cell, I keep the inverted state for the space in the 2nd column so it's quite easy to see that they are tied together.) 4) There is a small built-in table of zero-width spaces that are not to be printed but silently skipped. U+200A is included there, but it's not a zero-width character, so I remove it from there. Signed-off-by:Egmont Koblinger <egmont@uhulinux.hu> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Oliver Neukum authored
Signed-off-by:
Oliver Neukum <oneukum@suse.de> Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Jan Kara authored
A patch that stores inode flags such as S_IMMUTABLE, S_APPEND, etc. from i_flags to EXT3_I(inode)->i_flags when inode is written to disk. The same thing is done on GETFLAGS ioctl. Quota code changes these flags on quota files (to make it harder for sysadmin to screw himself) and these changes were not correctly propagated into the filesystem (especially, lsattr did not show them and users were wondering...). Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into ext3-specific i_flags. Hence, when someone sets these flags via a different interface than ioctl, they are stored correctly. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Tom Alsberg authored
As discovered here today, the change in Kernel 2.6.17 intended to inhibit users from setting RLIMIT_CPU to 0 (as that is equivalent to unlimited) by "cheating" and setting it to 1 in such a case, does not make a difference, as the check is done in the wrong place (too late), and only applies to the profiling code. On all systems I checked running kernels above 2.6.17, no matter what the hard and soft CPU time limits were before, a user could escape them by issuing in the shell (sh/bash/zsh) "ulimit -t 0", and then the user's process was not ever killed. Attached is a trivial patch to fix that. Simply moving the check to a slightly earlier location (specifically, before the line that actually assigns the limit - *old_rlim = new_rlim), does the trick. Do note that at least the zsh (but not ash, dash, or bash) shell has the problem of "caching" the limits set by the ulimit command, so when running zsh the fix will not immediately be evident - after entering "ulimit -t 0", "ulimit -a" will show "-t: cpu time (seconds) 0", even though the actual limit as returned by getrlimit(...) will be 1. It can be verified by opening a subshell (which will not have the values of the parent shell in cache) and checking in it, or just by running a CPU intensive command like "echo '65536^1048576' | bc" and verifying that it dumps core after one second. Regardless of whether that is a misfeature in the shell, perhaps it would be better to return -EINVAL from setrlimit in such a case instead of cheating and setting to 1, as that does not really reflect the actual state of the process anymore. I do not however know what the ground for that decision was in the original 2.6.17 change, and whether there would be any "backward" compatibility issues, so I preferred not to touch that right now. Signed-off-by:
-
Atsushi Nemoto authored
Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Atsushi Nemoto authored
The serial_txx9 driver have abused device numbers (major 4, minor 128) if CONFIG_SERIAL_TXX9_STDSERIAL was not set. This patch makes the driver use proper device numbers assigned for it (major 204, minor 196-203). I suppose a typical user of this driver set CONFIG_SERIAL_TXX9_STDSERIAL to Y (i.e. use "ttyS0"), so this patch would not cause big compatibility issue. Signed-off-by:
-
Scott Wiersdorf authored
A patch for getdelays.c that fixes a buffer overrun when you set -w. Cc: <matt@bluehost.com> Signed-off-by:
-
Michael Ellerman authored
Apparently it's not cool anymore to use SPIN/RW_LOCK_UNLOCKED. There's some mention of this in Documentation/spinlocks.txt, but that only talks about dynamic initialisation. A comment in the code mentioning the preferred usage would be good IMHO. [akpm@linux-foundation.org: add reason for deprecation] Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Pavel Emelianov authored
There are many places in the kernel where the construction like foo = list_entry(head->next, struct foo_struct, list); are used. The code might look more descriptive and neat if using the macro list_first_entry(head, type, member) \ list_entry((head)->next, type, member) Here is the macro itself and the examples of its usage in the generic code. If it will turn out to be useful, I can prepare the set of patches to inject in into arch-specific code, drivers, networking, etc. Signed-off-by:Pavel Emelianov <xemul@openvz.org> Signed-off-by:
Kirill Korotaev <dev@openvz.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Zach Brown <zach.brown@oracle.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Eric W. Biederman authored
This patches modifies the pnpbios kernel thread to start with ktrhead_run not kernel_thread and deamonize. Doing this makes the code a little simpler and easier to maintain. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Eric W. Biederman authored
Signed-off-by:
-
Randy Dunlap authored
Add usage to getdelays.c. This patch was originally posted by Randy Dunlap http://lkml.org/lkml/2007/3/19/168Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Jarek Poplawski authored
Signed-off-by:
Jarek Poplawski <jarkao2@o2.pl> Acked-by:
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by:
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
-
Stephen M. Cameron authored
Document how to detect drive failures for cciss Signed-off-by:
Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by:
-
Thomas Gleixner authored
While the !highres/!dyntick code assigns the duty of the do_timer() call to one specific CPU, this was dropped in the highres/dyntick part during development. Steven Rostedt discovered the xtime lock contention on highres/dyntick due to several CPUs trying to update jiffies. Add the single CPU assignement back. In the dyntick case this needs to be handled carefully, as the CPU which has the do_timer() duty must drop the assignement and let it be grabbed by another CPU, which is active. Otherwise the do_timer() calls would not happen during the long sleep. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Mark Lord <mlord@pobox.com> Cc: <stable@kernel.org> Signed-off-by:
-
Stephen Cameron authored
Make cciss unconditionally include scsi/scsi.h, because of the use of SCSI_IOCTL_GET_IDLUN and SCSI_IOCTL_GET_BUS_NUMBER. Signed-off-by:
-
Alan Cox authored
HZ has not always been 100Hz for some time. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Bjorn Helgaas authored
We used to warn unless the EFI system table major revision was exactly 1. But EFI 2.00 firmware is starting to appear, and the 2.00 changes don't affect anything in Linux. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Andi Kleen authored
Simple driver that blinks the keyboard LEDs when loaded. Useful for checking that the kernel is still alive or for crashdumping Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Miguel Ojeda authored
CREDITS: - Summarize 3 lines into one. - Add webpage. MAINTAINERS: - Add auxdisplay drivers/tree webpages. Signed-off-by:
Miguel Ojeda Sandonis <maxextreme@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Johannes Berg reported that struct names are not highlighted (bold, italic, etc.) in html kernel-doc output. (Also not in text-mode output, but I don't see that changing.) This patch adds the following: - highlight struct names in html output mode - highlight environment var. names in html output mode - indent struct fields in the original struct layout Signed-off-by:
-
Jeffrey Layton authored
A while back, Christoph mentioned that he thought that iunique ought to be cleaned up to use a more conventional loop construct. This patch does that, turning the strange goto loop into a do/while. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
John Johansen authored
notify_change() already calls security_inode_setattr() before calling iop->setattr. Alan sayeth This is a behaviour change on all of these and limits some behaviour of existing established security modules When inode_change_ok is called it has side effects. This includes clearing the SGID bit on attribute changes caused by chmod. If you make this change the results of some rulesets may be different before or after the change is made. I'm not saying the change is wrong but it does change behaviour so that needs looking at closely (ditto all other attribute twiddles) Signed-off-by:
Steve Beattie <sbeattie@suse.de> Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
John Johansen <jjohansen@suse.de> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
John Johansen authored
notify_change() already calls security_inode_setattr() before calling iop->setattr. Signed-off-by:
Tony Jones <tonyj@suse.de> Signed-off-by:
-
David Brownell authored
We've had various reports of some legacy "probe the hardware" style platform drivers having nasty problems with hotplug support. The core issue is that those legacy drivers don't fully conform to the driver model. They assume a role that should be the responsibility of infrastructure code: creating device nodes. The "modprobe" step in hotplugging relies on drivers to have split those roles into different modules. The lack of this split causes the problems. When a driver creates nodes for devices that don't exist (sending a hotplug event), then exits (aborting one modprobe) before the "modprobe $MODALIAS" step completes (by failing, since it's in the middle of a modprobe), the result can be an endless loop of modprobe invocations ... badness. This fix uses the newish per-device flag controlling issuance of "add" events. (A previous version of this patch used a per-device "driver can hotplug" flag, which only scrubbed $MODALIAS from the environment rather than suppressing the entire hotplug event.) It also shrinks that flag to one bit, saving a word in "struct device". So the net of this patch is removing some nasty failures with legacy drivers, while retaining hotplug capability for the majority of platform drivers. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Cc: Andres Salomon <dilinger@debian.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Borislav Petkov authored
A patch for kernel-doc that enables the generation of a global, TOC-like index.html page after building 'htmldocs' Signed-off-by:
Borislav Petkov <bbpetkov@yahoo.de> Acked-by:
-
Mike Miller (OS Dev) authored
Set rq->errors more correctly in cciss driver. Previously we had set it synonymously with the meaning of the last parameter of end_that_last_request and complete_buffers (the "uptodate" parameter) and had gotten away with it for all this time because nobody ever looked at rq->errors. SCSI_IOCTL_SEND_COMMAND looks at rq->errors, so now it matters that it be right. Signed-off-by:
Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Miller (OS Dev) authored
For all of you that think cciss should be a scsi driver here is the patch that you have been waiting for all these years. This patch actually adds the SG_IO ioctl to cciss. The primary purpose is for clustering and high-availibilty. But now anyone can exploit this ioctl in any manner they wish. Note, SCSI_IOCTL_SEND_COMMAND doesn't work with this patch due to rq->errors being set incorrectly. Subsequent patch fixes that. Signed-off-by:
-
Mike Miller (OS Dev) authored
Reformat some error handling code to reduce line lengths a bit. Signed-off-by:
-
Martin Peschke authored
We can save some lines of code by using seq_release_private(). Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Martin Peschke authored
We can save some lines of code by using seq_release_private(). Signed-off-by:
-
Christoph Hellwig authored
Merge all compat ioctl handling into compat_ioctl.c instead of splitting it over compat.c and compat_ioctl.c. This also allows to get rid of ioctl32.h Signed-off-by:
Christoph Hellwig <hch@lst.de> Looks-good-to: Andi Kleen <ak@suse.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Robert P. J. Day authored
Following the programming advice laid down in the gcc manual, make sure the case "..." operator has spaces on either side. According to: http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Case-Ranges.html#Case-Ranges: "Be careful: Write spaces around the ..., for otherwise it may be parsed wrong when you use it with integer values." Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Akinobu Mita authored
This patch fixes two things in module_init. - fix register_chrdev() error check Currently dtlk doesn't check register_chrdev() failure correctly. register_chrdev() returns a errno on failure. - check probe failure dtlk ignores probe failure and allows the module loading without such device. I got "Trying to free nonexistent resource" message by release_region() when unloading module without device. [akpm@linux-foundation.org: fix error code return] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Chris Pallotta <chris@allmedia.com> Cc: Jim Van Zandt <jrv@vanzandt.mv.com> Signed-off-by:
-
Philippe De Muyter authored
Add support for the Motorola sysv68 disk partition (slices in motorola doc). Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
