- 14 Sep, 2006 2 commits
-
-
Dmitry Torokhov authored
Microsoft Natural Elite Pro keyboard produces unisual response to the GET ID command - single byte 0xaa (normally keyboards produce 2-byte response). Fail GET ID command so atkbd gets a change to do alternate probe. Signed-off-by:Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
When keyboard controller is in active multiplexing mode ALPS touchpad may get detected twice. Since the box does not have external PS/2 ports simply disabling MUX mode is safe solution. Signed-off-by:
-
- 11 Sep, 2006 3 commits
-
-
Dmitry Torokhov authored
Remove polling timer that was used to detect keybord/mice hotplug and register both IRQs right away instead of waiting for a driver to attach to a port. Signed-off-by: -
Dmitry Torokhov authored
Emit key up events for all pressed keys/buttons when disconnecting an input device. Cures "stuck" enter key effect when unloading keyboard module. Signed-off-by: -
Helge Deller authored
Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
- 09 Aug, 2006 2 commits
-
-
Cjacker Huang authored
ALPS touchpad on Amoi laptops (Amoi is a vendor in China) is not detected when keyboard controller is in MUX mode, add to blacklist. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Helge Deller authored
Signed-off-by:
-
- 05 Aug, 2006 7 commits
-
-
Rick Koch authored
Signed-off-by:
Rick Koch <n1gp@hotmail.com> Signed-off-by:
-
Rick Koch authored
Signed-off-by:
-
Rick Koch authored
Signed-off-by:
-
Shaun Jackman authored
- Use the touch status bit rather than the pressure bits to distinguish a BTN_TOUCH event. Non-pressure-sensitive touchscreens always report full pressure - Report ABS_PRESSURE information only if the touchscreen supports it Signed-off-by:
Shaun Jackman <sjackman@gmail.com> Signed-off-by:
-
Shaun Jackman authored
Fix 10-byte protocol checksum calculation and do not discard packet early unless it is missing lead in byte. Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by: -
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
- 19 Jul, 2006 17 commits
-
-
Anssi Hannula authored
Signed-off-by:
Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by:
-
Anssi Hannula authored
Signed-off-by:
-
Anssi Hannula authored
Signed-off-by:
-
Anssi Hannula authored
The userspace interface of the force feedback part is changed and documentation in uinput.h is updated accordingly. MODULE_VERSION is also incremented to reflect the revision. Signed-off-by:
-
Anssi Hannula authored
Signed-off-by:
-
Anssi Hannula authored
This replaces the older PID driver which was never completed. Signed-off-by:
-
Anssi Hannula authored
Signed-off-by:
-
Anssi Hannula authored
Consolidate core implementing memoryless devices in one module; added support for gain and envelopes and periodic => rumble conversion. Signed-off-by:
-
Anssi Hannula authored
Implement a new force feedback interface, in which all non-driver-specific operations are separated to a common module. This includes handling effect type validations, locking, etc. The effects are now file descriptor specific instead of the previous strange half-process half-fd specific behaviour. The effect memory of devices is not emptied if the root user opens and closes the device while another user is using effects. This is a minor change and most likely no force feedback aware programs are affected by this negatively. Otherwise the userspace interface is left unaltered. Signed-off-by:
-
Anssi Hannula authored
Move fixp-arith.h from drivers/usb/input to drivers/input, as the part of force feedback support that requires trigonometric functions is being moved there. Signed-off-by:
-
Dmitry Torokhov authored
This will allow building input core module from several files which is needed for the reworked force feedback support. Signed-off-by: -
Randy Dunlap authored
Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Nick Martin authored
Although the Spaceball 4000FLX Lefty is already supported by the spaceball driver, it does not register properly due to SPACEBALL_MAX_ID being set too low. Increment SPACEBALL_MAX_ID such that the 4000FLX Lefty is properly recognized. Signed-off-by:
Nick Martin <nim+linux@nimlabs.org> Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by: -
Dmitry Torokhov authored
Signed-off-by: -
Dmitry Torokhov authored
Fixes Coverity #id 303 Signed-off-by: -
Dmitry Torokhov authored
The start() method need to be called every time we create a new handle. This includes not only registering new devices but also when registering new handlers. Signed-off-by:
-
- 15 Jul, 2006 3 commits
-
-
Dmitry Torokhov authored
Fixes Coverity #id 978 Signed-off-by: -
Andrew Morton authored
Signed-off-by:
-
Przemek Iskra authored
Signed-off-by:
Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
-
- 07 Jul, 2006 3 commits
-
-
Dmitry Torokhov authored
Fixes Coverity #id 864 Signed-off-by: -
Dmitry Torokhov authored
This is more user-friendly and also fixes Coverity #id 249 Signed-off-by: -
Dmitry Torokhov authored
Fixes Coverity #id 916 Signed-off-by:
-
- 06 Jul, 2006 3 commits
-
-
Andrew Morton authored
Signed-off-by:
-
Dmitry Torokhov authored
Create input_inject_event() function which is to be used by input handlers as opposed to input_event() which is reserved for drivers implementing input devices. The difference is that if device is "grabbed" by some process input_inject_event() will ignore events unless sent from the handle that is currently owns the device. Signed-off-by: -
Dmitry Torokhov authored
The new start() method is called immediately after connect() and also when "grabbed" device is released by its owner. This will allow input handlers to re-synchronize state of once-grabbed device with the rest of devices. Signed-off-by:
-
