- 21 Dec, 2010 40 commits
-
-
Joe Eykholt authored
When there are several FCFs to choose from, the one most likely to accept a FLOGI on certian switches is the one that last answered a multicast solicit. So, when receiving an advertisement, move the FCF to the front of the list so that it gets chosen first among those with the same priority. Without this, more FLOGIs need to be sent in a test with multiple FCFs and a switch in NPV mode, but it still eventually finds one that accepts the FLOGI. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Joe Eykholt authored
When multiple FCFs to the same fabric exist, the debug messages all look alike. Change the message to include the MAC address. Signed-off-by:
-
Joe Eykholt authored
Switches using multiple-FCFs may reject FLOGI in order to balance the load between multiple FCFs. Even though the FCF was available, it may have more load at the point we actually send the FLOGI. If the FLOGI fails, select a different FCF if possible, among those with the same priority. If no other FCF is available, just deliver the reject to libfc for retry. Signed-off-by:
-
Joe Eykholt authored
The check for conflicting fabrics in fcoe_ctlr_select() ignores any FCFs that aren't usable. This is a minor problem now but becomes more pronounced after later patches. Signed-off-by:
-
Joe Eykholt authored
Move some of the code in fcoe_ctlr_timer_work() to fcoe_ctlr_select() so that it can be shared with another function in a forthcoming patch. Signed-off-by:
-
Joe Eykholt authored
Move the announcement code to a separate function for reuse in a forthcoming patch. For messages regarding FCF timeout and selection, use the previously-announced FCF MAC address (dest_addr) in the fcoe_ctlr struct. Only print (announce) the FCF if it is new. Print MAC for timed-out or deselected FCFs. Signed-off-by:
-
Yi Zou authored
Frame should be freed in fc_tm_done, this is an updated patch on the one initially submitted by Hillf Danton. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
-
Yi Zou authored
The timeout for the exchange carrying REC itself is 2 * R_A_TOV_els. Signed-off-by:
-
Yi Zou authored
Should not continue when the abort itself is being timeout since in that case the exchange will be deleted and relesased. We still want to call the associated response handler to let the layer, e.g., fcp, know the exchange itself is being timed out. Signed-off-by:
-
Yi Zou authored
Do not call fc_io_compl() on fsp w/o any scsi_cmnd, e.g., lun reset is built inside fc_fcp, not from a scsi command from queuecommnd from scsi-ml, so in in case target is buggy that is invalid flags in the FCP_RSP, as we have seen in some SAN Blaze target where all bits in flags are 0, we do not want to call io_compl on this fsp. [ Comment block added by Robert Love ] Signed-off-by:
-
Yi Zou authored
This is very helpful to match up the corresponding exchange to the actual I/O described by the fsp, particularly when you do a side-by-side comparison of the syslog with your trace. Signed-off-by:
-
Joe Perches authored
Add missing newlines. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Hillf Danton authored
There seems rdata should get put before return. Signed-off-by:
-
Hillf Danton authored
There seems info should get freed when error encountered. Signed-off-by:
-
Hillf Danton authored
There seems info should get freed when error encountered. Signed-off-by:
-
john fastabend authored
We can easily remove the tgt_flags from fc_fcp_pkt struct and use rpriv->tgt_flags directly where needed. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
john fastabend authored
Use the rport value for rec_tov for timeout values when sending fcp commands. Currently, defaults are being used which may or may not match the advertised values. The default may cause i/o to timeout on networks that set this value larger then the default value. To make the timeout more configurable in the non-REC mode we remove the FC_SCSI_ER_TIMEOUT completely allowing the scsi-ml to do the timeout. This removes an unneeded timer and allows the i/o timeout to be configured using the scsi-ml knobs. Signed-off-by:
-
john fastabend authored
The fcp packet recovery handler fc_fcp_recover() is called when errors occurr in a fcp session. Currently it is generically setting the status code to FC_CMD_RECOVERY for all error types. This results in DID_BUS_BUSY errors being returned to the scsi-ml. DID_BUS_BUSY errors indicate "BUS stayed busy through time out period" according to scsi.h. Many of the error reported by fc_rcp_recovery() are pkt errors. Here we update fc_fcp_recovery to use better host byte codes. With certain FAST FAIL flags set DID_BUS_BUSY and DID_ERROR will have different behaviors this was causing dm multipath to fail quickly in some cases where a retry would be a better action. Signed-off-by:
-
Hillf Danton authored
There seems accumulation needed. Signed-off-by:
-
Hillf Danton authored
There is a typo cleaned, which triggers memory leakage. Signed-off-by:
-
Robert Love authored
The error handler grabs the si->scsi_queue_lock, but in the case where the fsp pointer is NULL it releases the scsi_host lock. This can lead to a variety of system hangs depending on which is used first- the scsi_host lock or the scsi_queue_lock. This patch simply unlocks the correct lock when fcp is NULL. Signed-off-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
Hillf Danton authored
For allocating new exch from pool, scanning for free slot in exch array fluctuates when exch pool is close to exhaustion. The fluctuation is smoothed, and the scan looks to be O(2). Signed-off-by:
-
Hillf Danton authored
There seems that ep should get released, or it will no longer get freed. Signed-off-by:
-
Yi Zou authored
This happens when then tearing down the fcoe interface with active I/O. The back trace shows dead000000200200 in RAX, i.e., LIST_POISON2, indicating that the fsp is already being dequeued, which is probably why no complaining was seen in fc_fcp_destroy() about outstanding fsp not freed, since we dequeue it in the end of fc_io_compl() before releasing it. The bug is due to the fact that we have already destroyed lport's scsi_pkt_pool while on-going i/o is still accessing it through fc_fcp_pkt_release(), like this trace or the similar code path from scsi-ml to fc_eh_abort, etc. This is fixed by moving the fc_fcp_destroy() after lport is detached from scsi-ml since fc_fcp_destroy is supposed to called only once where no lport lock is taken, otherwise the fc_fcp_pkt_release() would have to grab the lport lock. BUG: unable to handle kernel NULL pointer dereference at (null) ....... RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8803270f7b88 EFLAGS: 00010282 RAX: dead000000200200 RBX: ffff880197d2fbc0 RCX: 0000000000005908 RDX: ffff880195ea6d08 RSI: 0000000000000282 RDI: ffff880180f4fec0 RBP: ffff8803270f7bc0 R08: ffff880197d2fbe0 R09: 0000000000000000 R10: ffff88032867f090 R11: 0000000000000000 R12: ffff880195ea6d08 R13: 0000000000000282 R14: ffff880180f4fec0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8801b5820000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000001a6eae000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process fc_rport_eq (pid: 5278, threadinfo ffff8803270f6000, task ffff880326254ab0) Stack: ffffffffa02c39ca ffff8803270f7ba0 ffff88019331cbc0 ffff880197d2fbc0 0000000000000000 ffff8801a8c895e0 ffff8801a8c895e0 ffff8803270f7c10 ffffffffa02c4962 ffff8803270f7be0 ffffffff814c94ab ffff8803270f7c10 Call Trace: [<ffffffffa02c39ca>] ? fc_io_compl+0x10a/0x530 [libfc] [<ffffffffa02c4962>] fc_fcp_complete_locked+0x72/0x150 [libfc] [<ffffffff814c94ab>] ? _spin_unlock_bh+0x1b/0x20 [<ffffffffa02b98ff>] ? fc_exch_done+0x3f/0x60 [libfc] [<ffffffffa02c4a8f>] fc_fcp_retry_cmd+0x4f/0x60 [libfc] [<ffffffffa02c6150>] fc_fcp_recv+0x9b0/0xc30 [libfc] [<ffffffff8106ba7a>] ? _call_console_drivers+0x4a/0x80 [<ffffffff8107d5ec>] ? lock_timer_base+0x3c/0x70 [<ffffffff8107e06b>] ? try_to_del_timer_sync+0x7b/0xe0 [<ffffffffa02b9dcf>] fc_exch_mgr_reset+0x1df/0x250 [libfc] [<ffffffffa02c57a0>] ? fc_fcp_recv+0x0/0xc30 [libfc] [<ffffffffa02c1042>] fc_rport_work+0xf2/0x4e0 [libfc] [<ffffffff8109203e>] ? prepare_to_wait+0x4e/0x80 [<ffffffffa02c0f50>] ? fc_rport_work+0x0/0x4e0 [libfc] [<ffffffff8108c6c0>] worker_thread+0x170/0x2a0 [<ffffffff81091d50>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8108c550>] ? worker_thread+0x0/0x2a0 [<ffffffff810919e6>] kthread+0x96/0xa0 [<ffffffff810141ca>] child_rip+0xa/0x20 [<ffffffff81091950>] ? kthread+0x0/0xa0 [<ffffffff810141c0>] ? child_rip+0x0/0x20 Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8803270f7b88> CR2: 0000000000000000 Signed-off-by:
-
Hillf Danton authored
The define for fc_seq_exch is unnecessary, since it also appears in scsi/libfc.h Signed-off-by:
-
Maggie authored
First round of fix for the endianess check warnings from make C=2 CF="-D__CHECK_ENDIAN__". Signed-off-by:
Maggie <xmzhang@brocade.com> Signed-off-by:
-
Maggie authored
Fix all sparse check warnings from make C=2. Signed-off-by:
-
Eddie Wai authored
Signed-off-by:
Eddie Wai <eddie.wai@broadcom.com> Signed-off-by:
-
Eddie Wai authored
Signed-off-by:
-
Eddie Wai authored
Various error conditions inside ep_connect and ep_disconnect were either not being handled or not being handled correctly. This patch fixes all those issues. Signed-off-by:
Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Eddie Wai authored
Added the handling for cases when a chip request is made to the CNIC module but the hardware is not ready to accept. This would lead to many unnecessary wait timeouts. This code adds check in the connect establishment and destruction path. Signed-off-by:
-
Eddie Wai authored
The stop path has been augmented to wait a max of 10s for all in progress offload and destroy activities to complete before proceeding to terminate all active connections (via iscsid or forcefully). Note that any new offload and destroy requests are now blocked and return to the caller immediately. Signed-off-by:
Benjamin Li <benli@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Reviewed-by:
-
Eddie Wai authored
The code no longer needs to dynamically register and unregister the CNIC device. The CNIC device will be kept registered until module unload. Signed-off-by:
-
Eddie Wai authored
Added net_dev mutex lock protection before accessing the csk parameters. Signed-off-by:
-
Eddie Wai authored
In the situation where the connect completion response arrives after the connect request has already timed out, the connection was not being aborted but only the resource was being freed. This creates a problem for 5771X (10g) as the chip flags this with an assertion. This change will properly aborts the connection before freeing the resource. Signed-off-by:
-
Eddie Wai authored
Modified the handling of the remote TCP RST code so the chip can now flush the tx pipe accordingly upon a remote TCP RST reception. Signed-off-by:
-
Eddie Wai authored
A cid leak issue was found when the connect destroy request exceeded the driver's disconnection timeout. This will lead to a cid resource leak issue. The fix is to allow the cid cleanup even when this happens. Signed-off-by:
-
Eddie Wai authored
Added a be32_to_cpu call for the TMF LUN wqe. Signed-off-by:
-
Eddie Wai authored
The patch fixes the following situations where NOP-Out pkt is called for: - local unsolicited NOP-Out requests (requesting no NOP-In response) - local NOP-Out responses to unsolicited NOP-In requests kernel panic is observed due to double session spin_lock requests; one in the bnx2i_process_nopin_local_cmpl routine in bnx2i_hwi.c and the other in the iscsi_put_task routine in libiscsi.c The proposed fix is to export the currently static __iscsi_put_task() routine and have bnx2i call it directly instead of the iscsi_put_task() routine which holds the session spin lock. Signed-off-by:
-
Eddie Wai authored
Unsolicited NOP-Ins are placed in the receive queue of the hardware which requires to be read out regardless if the receive pipe is suspended or not. This patch adds the disposal of this RQ element under this condition. Also fixed the bug in the unsolicited NOP-In handling routine which checks for the RESERVED_ITT. Signed-off-by:
-
