- 30 Apr, 2019 5 commits
-
-
Christian Gromm authored
This patch fixes the usage of the wrong struct device when calling function snd_card_new. Reported-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Fixes: 69c90cf1 ("staging: most: sound: call snd_card_new with struct device") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
The code is calculating the resource size wrong because it should be inclusive of the "res->end" address. In other words, "end - start + 1". We can just use the resource_size() function to do it correctly. Fixes: 7dc7967f ("staging: kpc2000: add initial set of Daktronics drivers") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The kp2000_regs struct has a 4 byte hole between ->hw_rev and ->ssid so this could leak stack information to the user. This patch just memsets the whole struct to zero. Fixes: 7dc7967f ("staging: kpc2000: add initial set of Daktronics drivers") Signed-off-by:
-
Jeremy Sowden authored
master was being initialized to a particular value and then having the same value assigned to it immediately afterwards. Removed the initializer. Since the value assigned to master was dynamically allocated, this fixes a memory-leak. Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Jeremy Sowden authored
drvdata was being initialized to a particular value and then having the same value assigned to it immediately afterwards. Removed the initializer. Since the value assigned, pldev->dev.platform_data, is a pointer-to- void, removed superfluous cast. Signed-off-by:
-
- 27 Apr, 2019 1 commit
-
-
Ian Abbott authored
The "comedi_isadma" module calls `dma_alloc_coherent()` and `dma_free_coherent()` with a NULL device pointer which is no longer allowed. If the `hw_dev` member of the `struct comedi_device` has been set to a valid device, that can be used instead. Unfortunately, all the current users of the "comedi_isadma" module leave the `hw_dev` member set to NULL. In that case, fall back to using the comedi "class" device pointed to by the `class_dev` member if that is non-NULL. In that case, make it "DMA-capable" with a coherent DMA mask set to the ISA bus limit of 16MB (24 bits). Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
- 25 Apr, 2019 32 commits
-
-
Patrick Havelange authored
Add the 4 Quadrature counters for this board. Reviewed-by:
Esben Haabendal <esben@haabendal.dk> Signed-off-by:
Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
-
Patrick Havelange authored
This adds documentation for the specific prescaler entry. Signed-off-by:
-
Patrick Havelange authored
This driver exposes the counter for the quadrature decoder of the FlexTimer Module, present in the LS1021A soc. Signed-off-by:
-
Patrick Havelange authored
FlexTimer quadrature decoder driver. Reviewed-by:
-
Patrick Havelange authored
Common #defines have been moved to "linux/fsl/ftm.h". Thus making use of this file. Also FTM_SC_CLK_SHIFT has been renamed to FTM_SC_CLK_MASK_SHIFT. Reviewed-by:
-
Patrick Havelange authored
This also fixes the wrong value for the previously defined FTM_MODE_INIT macro (it was not used). Reviewed-by:
-
Patrick Havelange authored
Several files are/will be using the same #defines to use the Flextimer module. Regroup them in a common file. Reviewed-by:
-
William Breathitt Gray authored
The IIO counter subdirectory is now superceded by the Counter subsystem. This patch adds deprecation warnings to the documentation of the relevant IIO Counter sysfs attributes. Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Fabrice Gasnier authored
The STM32 LP Timer counter driver now resides under the Counter subsystem. This patch adjusts dt-bindings to account for the STM32 lptimer driver move. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Fabrice Gasnier authored
Add support for new counter device to stm32-lptimer. Signed-off-by:
-
Benjamin Gaignard authored
Add bindings for STM32 Timer quadrature encoder. It is a sub-node of STM32 Timer which implement the quadratic encoder part of the hardware. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by:
-
Benjamin Gaignard authored
Implement counter part of the STM32 timer hardware block by using counter API. Hardware only supports X2 and X4 quadrature modes. A ceiling value can be set to define the maximum value reachable by the counter. Signed-off-by:
-
William Breathitt Gray authored
This patch adds standard documentation for the Generic Counter interface userspace sysfs attributes of the 104-QUAD-8 driver. Acked-by:
-
William Breathitt Gray authored
This patch adds support for the Generic Counter interface to the 104-QUAD-8 driver. The existing 104-QUAD-8 device interface should not be affected by this patch; all changes are intended as supplemental additions as perceived by the user. Generic Counter Counts are created for the eight quadrature channel counts, as well as their respective quadrature A and B Signals (which are associated via respective Synapse structures) and respective index Signals. The new Generic Counter interface sysfs attributes are intended to expose the same functionality and data available via the existing 104-QUAD-8 IIO device interface; the Generic Counter interface serves to provide the respective functionality and data in a standard way expected of counter devices. Reviewed-by:
-
William Breathitt Gray authored
This patch simplifies the boilerplate license text by making use of a SPDX license identifier line. Signed-off-by:
-
William Breathitt Gray authored
This patch adds high-level documentation about the Generic Counter interface. Reviewed-by:
-
William Breathitt Gray authored
This patch adds standard documentation for the userspace sysfs attributes of the Generic Counter interface. Reviewed-by:
-
William Breathitt Gray authored
This patch introduces the Generic Counter interface for supporting counter devices. In the context of the Generic Counter interface, a counter is defined as a device that reports one or more "counts" based on the state changes of one or more "signals" as evaluated by a defined "count function." Driver callbacks should be provided to communicate with the device: to read and write various Signals and Counts, and to set and get the "action mode" and "count function" for various Synapses and Counts respectively. To support a counter device, a driver must first allocate the available Counter Signals via counter_signal structures. These Signals should be stored as an array and set to the signals array member of an allocated counter_device structure before the Counter is registered to the system. Counter Counts may be allocated via counter_count structures, and respective Counter Signal associations (Synapses) made via counter_synapse structures. Associated counter_synapse structures are stored as an array and set to the the synapses array member of the respective counter_count structure. These counter_count structures are set to the counts array member of an allocated counter_device structure before the Counter is registered to the system. A counter device is registered to the system by passing the respective initialized counter_device structure to the counter_register function; similarly, the counter_unregister function unregisters the respective Counter. The devm_counter_register and devm_counter_unregister functions serve as device memory-managed versions of the counter_register and counter_unregister functions respectively. Reviewed-by:
-
Matt Sickler authored
Add Daktronics DMA driver. I've added the SPDX license identifiers, Kconfig entry, and cleaned up as many of the warnings as I could. The AIO support code will be removed in a future patch. Signed-off-by:
Matt Sickler <matt.sickler@daktronics.com> Signed-off-by:
-
Madhumitha Prabakaran authored
Remove unnecessary variable from the function and make a corresponding change w.r.t the variable. In addition to that align the parameters in the parentheses to maintain Linux kernel coding style Issue suggested by Coccinelle. Signed-off-by:
Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by:
-
Michael Straube authored
Remove unnecessary parentheses to improve readability. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Michael Straube authored
Add spaces around '-' to follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Replace subtraction with the result to improve readability and clear missing spaces around '-' checkpatch issues. Signed-off-by:
-
Michael Straube authored
Add spaces around '+', '-' and '|' to follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Jerry Lin authored
This commit eliminate all uses of legacy integer base GPIO API in olpc_dcon_xo_1_5.c and replace them with new descriptor GPIO API like those in olpc_dcon_xo_1.c. Also pull some common code with olpc_dcon_xo_1.c to olpc_dcon.h for code sharing. Signed-off-by:
Jerry Lin <wahahab11@gmail.com> Signed-off-by:
-
Michael Straube authored
Cleanup indenting issue reported by checkpatch. WARNING: suspect code indent for conditional statements (8, 17) Signed-off-by:
-
Fuqian Huang authored
Pointers should be printed with %p or %px rather than cast to unsigned long type and printed with %lx. Change %lx to %pK to print the pointers. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
The strcpy() function is being deprecated. Replace it by the safer strscpy() and fix the following Coverity warning: "You might overrun the 80-character fixed-size string iface->p->name by copying iface->description without checking the length." Addresses-Coverity-ID: 1444760 ("Copy into fixed size buffer") Fixes: 131ac622 ("staging: most: core: use device description as name") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/staging/kpc2000/kpc2000/cell_probe.c:96:38: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct resource resources[2] = {0}; ^ {} drivers/staging/kpc2000/kpc2000/cell_probe.c:314:38: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct resource resources[2] = {0}; ^ {} 2 warnings generated. One way to fix these warnings is to add additional braces like Clang suggests; however, there has been a bit of push back from some maintainers, who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version, and properly initializes all subobjects [1][2]. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ Link: https://github.com/ClangBuiltLinux/linux/issues/455Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanup for the 5.2 cycle. New device suport * ad7606 - Support the AD7616 16 channel, 12bit ADC. * fxas21002c - New driver for this gyroscope with I2C and SPI support. * lsm6dsx - Support the lsm6dsr, new device information structure and dt bindings. * srf04 - Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 + support of different required trigger pulse lengths. * st-accel - Support the ls2de12, new device info and dt bindings. * ti-ads8344 - New driver for this 8 channel, 16 bit SPI ADC. Binding conversions to yaml - we have started doing these in general for IIO. * avia-hx711 * bmp085 Cleanups and minor fixes / additions * ad5758 - Fixup for some changes between preproduction parts and final part. * ad7606 - Refactor handling of oversampling to make it easy to vary between supported devices. * ad9832 - Organise includes. - Clock framework to handle clocks. * ad9834 - Drop unnecessary parenthesis. * bmc150 - Use __func__ rather than hardcoding. * dummy_evgen. - Fix a memleak on error in probe. * kxcjk1013 - Add KXCJ91008 ACPI ID as seen in the wild. - Use __func__ rather than hardcoding. * imx7d - Local dev variable to simplify code a bit. - dev_err replaces pr_err to give more info. - devm_platform_ioremap_resource for small reduction in boilerplate. - Simplify probe and remove by sharing suspend / resume logic. - Devm for iio_device_register as remove only contains the unregister. * lsm6dsx - Remove a variable that was never read. - Open code values where they are effectively described by what is assigned to them rather than using uninformative defines. * max31856 - Avoid an unintialized ret variable in a path that can't actually occur but is hard for a static checker to know. * max9611 - White space * mpu3050 - Reduce a sleep worst case by switching from msleep to usleep_range. * qcom-spmi-adc5 - Add MODULE_DEVICE_TABLE to assist autoloading of this as a module. * stm32-dfsdm - Fix missing dependencies. * stm32-timer trigger - Fix a build issue when disabled. * ti-ads7950 - Fix mising dependency on CONFIG_GPIOLIB. * tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits) iio: adc: qcom-spmi-adc5: Fix of-based module autoloading iio: dummy_evgen: fix possible memleak in evgen init iio:accel:Switch hardcoded function name with a reference to __func__ making the code more maintainable iio: adc: stm32-dfsdm: fix triggered buffer build dependency iio: adc: stm32-dfsdm: fix unmet direct dependencies detected iio: trigger: stm32-timer: fix build issue when disabled iio: imx7d_adc: Use devm_iio_device_register() iio: imx7d_adc: Simplify imx7d_adc_remove() with imx7d_adc_suspend() iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume() drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch warning. iio: dac: ad5758: Modifications for new revision iio: imu: st_lsm6dsx: inline per-sensor data iio: adc: Add driver for the TI ADS8344 A/DC chips dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips MAINTAINERS: add entry for fxas21002c gyro driver iio: gyro: fxas21002c: add spi driver iio: gyro: fxas21002c: add i2c driver iio: gyro: add core driver for fxas21002c iio: gyro: add DT bindings to fxas21002c Kconfig: change configuration of srf04 ultrasonic iio sensor ...
-
- 22 Apr, 2019 2 commits
-
-
Bjorn Andersson authored
The of_device_id table needs to be registered as module alias in order for automatic module loading to pick the kernel module based on the DeviceTree compatible. So add MODULE_DEVICE_TABLE() to make this happen. Fixes: e13d7572 ("iio: adc: Add QCOM SPMI PMIC5 ADC driver") Cc: stable@vger.kernel.org Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Pan Bian authored
The memory allocated in the function iio_dummy_evgen_create is not released if it fails to add the evgen device to device hierarchy. This may result in a memory leak bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
