- 25 Jun, 2012 11 commits
-
-
Marc Dietrich authored
This patch simplifies code by using the module_platform_driver macro. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Dietrich authored
Replace a printk in nvec core driver with dev_warn. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Dietrich authored
This patch cleanups the nvec and its childs by replacing calls to resource allocations by their devm_* equivalents. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
In the rest of the code, the data is protected with spin_lock_irqsave(). Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
The buffer[][] field was replaced by tty_port->xmit_buf field but there was some places that "buffer" was still accessed, giving a kernel oops because it was uninitialized. Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Justin P. Mattock authored
The below patch fixes some typos found in staging "sm7xxfb" while reading through. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Seth Jennings authored
This patch switches zcache and zram dependency to ZSMALLOC rather than X86. There is no net change since ZSMALLOC depends on X86, however, this prevent further changes to these files as zsmalloc dependencies change. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
Fix frame size (stack usage) warning by allocating and freeing pointers to the data. drivers/staging/wlan-ng/prism2fw.c:1115:1: warning: the frame size of 4288 bytes is larger than 2048 bytes Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This picks up the staging changes made in 3.5-rc4 so that everyone can sync up properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 Jun, 2012 7 commits
-
-
Linus Torvalds authored
-
Anatol Pomozov authored
Coult -> Could Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Avi Kivity: "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which allowed pci bridges to be assigned to guests." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page KVM: Fix PCI header check on device assignment
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull InfiniBand/RDMA fixes from Roland Dreier: - Fixes to new ocrdma driver - Typo in test in CMA * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: QP type check on received REQs should be AND not OR RDMA/ocrdma: Fix off by one in ocrdma_query_gid() RDMA/ocrdma: Fixed RQ error CQE polling RDMA/ocrdma: Correct queue SGE calculation RDMA/ocrdma: Correct reported max queue sizes RDMA/ocrdma: Fixed GID table for vlan and events
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Nothing very controversial in here. Most of the fixes are for OMAP this time around, with some orion/kirkwood and a tegra patch mixed in." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion: Fix Virtual/Physical mixup with watchdog ARM: Kirkwood: clk_register_gate_fn: add fn assignment ARM: Orion5x - Restore parts of io.h, with rework ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code ARM: tegra: make tegra_cpu_reset_handler_enable() __init ARM: OMAP: PM: Lock clocks list while generating summary ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing major in here, one radeon SI fix for tiling, and one uninit var fix, two minor header file fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: drop comment about this header being autogenerated. drm/edid: don't return stack garbage from supports_rb vga_switcheroo: Add include guard drm/radeon: SI tiling fixes for display
-
Roland Dreier authored
-
- 23 Jun, 2012 22 commits
-
-
Andrew Lunn authored
The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Marc Kleine-Budde authored
In commit: 98d9986c ARM: Kirkwood: Replace clock gating the kirkwood clock gating has been reworked. A custom variant of clock gating, that calls a custom function before gating the clock off, has been introduced. However in clk_register_gate_fn() this custom function "fn" is never assigned. This patch adds the missing fn assignment. Cc: stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Andrew Lunn authored
Commit 4d5fc58d (ARM: remove bunch of now unused mach/io.h files) removed the orion5x io.h. Unfortunately, this is still needed for the definition of IO_SPACE_LIMIT which overrides the default 64K. All Orion based systems have 1Mbyte of IO space per PCI[e] bus, and try to request_resource() this size. Orion5x has two such PCI buses. It is likely that the original, removed version, was broken. This version might be less broken. However, it has not been tested on hardware with a PCI card, let alone hardware with a PCI card with IO capabilities. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley (as per Tony Lindgren's request): "Some uncontroversial OMAP clock, hwmod, and compiler warning fixes for 3.5-rc" * tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: PM: Lock clocks list while generating summary
-
Olof Johansson authored
Merge tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here are a few fixes with the biggest one being fix for Beagle DVI reset. All of them are regression fixes, except for the missing omap2 interrupt controller binding that somehow got missed earlier." * tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code
-
Larry Finger authored
This driver contains version information that is outdated, has no real value in terms of the Linux update process, and tends to confuse users. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Meerwald authored
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Meerwald authored
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Meerwald authored
accessing first and last channel fails: fakedata[0] is never accessed, out-of-bound access for last channel Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Use to_iio_trigger(dev) instead of dev_get_drvdata(dev). Both will return the trigger which belongs to the device, but the the first on is a bit more lightweight. Since this is the last location where we used dev_get_drvdata() for retrieving the trigger there is no need anymore to assign the the trigger to the devices drvdata, so we can remove that as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
Use to_iio_trigger(dev) instead of dev_get_drvdata(dev). Both will return the trigger which belongs to the device, but the the first on is a bit more lightweight. Also this will eventually free up the drvdata pointer of the device for driver specific data. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jesper Juhl authored
The result of "foo = bar" is true, so in statements such as ... if((pDevice->bwextstep0 = TRUE)&&(param->u.wpa_key.key_index ==1)) ... an assignment is most likely not what was intended - a comparison was. As in: ... if ((pDevice->bwextstep0 == TRUE) && (param->u.wpa_key.key_index == 1)) ... There are a 3 such mistakes in the iwctl_siwencodeext() function. This patch fixes them all. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jesper Juhl authored
The header "rts51x.h" is included unconditionally at the start of the file and then again once more under "#ifdef SUPPORT_FILE_OP". Once is enough, so remove the conditional include and just keep the unconditional one. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erik Jones authored
Fixed a coding style issue. Signed-off-by: Erik Jones <erik@ejnode.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Move the pcmcia_disable_device() call where needed in the pcmcia attach/detach and delete the dio700_release() function. Move the logic of dio700_config() directly into the attach function and properly return an error code when the config fails. Only set the pcmcia_cur_dev, used by the comedi_driver, if the pcmcia attach is successful. Also, make sure to NULL it in the detach. Remove all the kernel messages in the pcmcia support code. They are just added noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pcmcia suspend/resume callbacks don't do anything. Remove them. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pcmcia device-specific data is not longer needed by this driver. Remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pcmcia support code in this driver appears to be cut-and- paste from some other driver. It has code in it to stop the device during suspend but nothing in the main comedi_driver uses it. Remove the 'stop' variable from the pcmcia private data and all the logic that deals with it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
These messages should probably just be removed. For now just clean then up. Remove a couple redundant KERN_INFO messages in the pcmcia support code and leave the dev_dbg() ones. Change the dev_dgb() messages to use __func__ instead of the open coded string. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The comedi insn_config functions should return < 0 for errors or the number of data elements used to perform the command, this value is available as 'insn->n'. Return that instead of the open coded number to better indicate what the return means. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The 'data[1] = ...' line is currently kept < 80 chars by breaking a pointer access after the '->'. This makes the code a bit confusing to follow. Use a local variable to shorten the line and make it clearer. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Functions don't need the ';' at the end. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-