- 04 Jul, 2024 5 commits
-
-
Johannes Berg authored
If open fails, we have already set vp->opened, but it's not reset so that any further attempts will just return -ENXIO. Reset vp->opened even if close has nothing to do. This helps e.g. with slirp4netns handling only a single connection, you can then restart it and open the device again. Link: https://patch.msgid.link/20240703184622.df40c5c38461.Id4e20b48938c6019d99e6133227a34ac059db466@changeidAcked-By:
Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
This lock is useless, all the places that are using it for some locking will already hold the RTNL. Just remove it. Link: https://patch.msgid.link/20240703184606.19aa35b14959.I9cf5f2c4e35abd06cc89bf2e990fa755eb8e5f0f@changeidAcked-By:
-
Johannes Berg authored
Otherwise we always get reboot: Power off not available: System halted instead which is really quite pointless. Link: https://patch.msgid.link/20240703173839.fcbb538c6686.I3d333f4773cff93c4337c4d128ee0b1b501b3dfa@changeidAcked-By:
-
Johannes Berg authored
The pointer isn't initialized by callers, but I have encountered cases where it's still printed; initialize it in all possible cases in setup_one_line(). Link: https://patch.msgid.link/20240703172235.ad863568b55f.Iaa1eba4db8265d7715ba71d5f6bb8c7ff63d27e9@changeidAcked-By:
-
Johannes Berg authored
We just removed the driver, but forgot the row in the documentation table mentioning it. Remove that. Link: https://patch.msgid.link/20240703172013.c3232dc5cbe9.I7f9941095d45a39d0f1e83680a408b3c6d445242@changeidAcked-By:
-
- 03 Jul, 2024 35 commits
-
-
Anton Ivanov authored
Since userspace state is saved in the MM process, kernel using FPU still doesn't really need to do anything, so this really is as simple as enabling preemption. The irq critical section in sigio_handler() needs preempt_disable()/preempt_enable(). Signed-off-by:
-
Benjamin Berg authored
Conceptually, we want the memory mappings to always be up to date and represent whatever is in the TLB. To ensure that, we need to sync them over in the userspace case and for the kernel we need to process the mappings. The kernel will call flush_tlb_* if page table entries that were valid before become invalid. Unfortunately, this is not the case if entries are added. As such, change both flush_tlb_* and set_ptes to track the memory range that has to be synchronized. For the kernel, we need to execute a flush_tlb_kern_* immediately but we can wait for the first page fault in case of set_ptes. For userspace in contrast we only store that a range of memory needs to be synced and do so whenever we switch to that process. Signed-off-by:
Benjamin Berg <benjamin.berg@intel.com> Link: https://patch.msgid.link/20240703134536.1161108-13-benjamin@sipsolutions.netSigned-off-by:
-
Benjamin Berg authored
The HVC update was mostly used to compress consecutive calls into one. This is mostly relevant for userspace where it is already handled by the syscall stub code. Simplify the whole logic and consolidate it for both kernel and userspace. This does remove the sequential syscall compression for the kernel, however that shouldn't be the main factor in most runs. Signed-off-by:
-
Benjamin Berg authored
There should be no need for this. It may be that this used to work around another issue where after a clone the MM was in a bad state. Signed-off-by:
-
Benjamin Berg authored
There should be no need to flush the memory in flush_thread. Doing this likely worked around some issue where memory was still incorrectly mapped when creating or cloning an MM. With the removal of the special clone path, that isn't relevant anymore. However, add the flush into MM initialization so that any new userspace MM is guaranteed to be clean. Signed-off-by:
-
Benjamin Berg authored
As running the syscalls is expensive due to context switches, we should do so as late as possible in case more syscalls need to be queued later on. This will also benefit a later move to a SECCOMP enabled userspace as in that case the need for extra context switches is removed entirely. Signed-off-by:
Benjamin Berg <benjamin@sipsolutions.net> Link: https://patch.msgid.link/20240703134536.1161108-9-benjamin@sipsolutions.netSigned-off-by:
-
Benjamin Berg authored
The kernel flushes the memory ranges anyway for CoW and does not assume that the userspace process has anything set up already. So, start with a fresh process for the new mm context. Signed-off-by:
-
Benjamin Berg authored
The current LDT code has a few issues that mean it should be redone in a different way once we always start with a fresh MM even when cloning. In a new and better world, the kernel would just ensure its own LDT is clear at startup. At that point, all that is needed is a simple function to populate the LDT from another MM in arch_dup_mmap combined with some tracking of the installed LDT entries for each MM. Note that the old implementation was even incorrect with regard to reading, as it copied out the LDT entries in the internal format rather than converting them to the userspace structure. Removal should be fine as the LDT is not used for thread-local storage anymore. Signed-off-by:
-
Benjamin Berg authored
To keep the number of syscalls that the stub has to do lower, compress two consecutive syscalls of the same type if the second is just a continuation of the first. Signed-off-by:
-
Benjamin Berg authored
Rework syscall handling to be platform independent. Also create a clean split between queueing of syscalls and flushing them out, removing the need to keep state in the code that triggers the syscalls. The code adds syscall_data_len to the global mm_id structure. This will be used later to allow surrounding code to track whether syscalls still need to run and if errors occurred. Signed-off-by:
-
Benjamin Berg authored
This function will be used by the new syscall handling code. Signed-off-by:
-
Benjamin Berg authored
When we switch to use seccomp, we need both the signal stack and other data (i.e. syscall information) to co-exist in the stub data. To facilitate this, start by defining separate memory areas for the stack and syscall data. This moves the signal stack onto a new page as the memory area is not sufficient to hold both signal stack and syscall information. Only change the signal stack setup for now, as the syscall code will be reworked later. Signed-off-by:
-
Benjamin Berg authored
Further commits will require values from common-offsets.h inside stub-data.h. Resolve the possible circular dependency and simply use offsetof() inside stub_32.h and stub_64.h. Signed-off-by:
-
Johannes Berg authored
When signals are hard-blocked in order to do time-travel socket processing, we set signals_blocked and then handle SIGIO signals by setting the SIGIO bit in signals_pending. When unblocking, we first set signals_blocked to 0, and then handle all pending signals. We have to set it first, so that we can again properly block/unblock inside the unblock, if the time-travel handlers need to be processed. Unfortunately, this is racy. We can get into this situation: // signals_pending = SIGIO_MASK unblock_signals_hard() signals_blocked = 0; if (signals_pending && signals_enabled) { block_signals(); unblock_signals() ... sig_handler_common(SIGIO, NULL, NULL); sigio_handler() ... sigio_reg_handler() irq_do_timetravel_handler() reg->timetravel_handler() == vu_req_interrupt_comm_handler() vu_req_read_message() vhost_user_recv_req() vhost_user_recv() vhost_user_recv_header() // reads 12 bytes header of // 20 bytes message <-- receive SIGIO here <-- sig_handler() int enabled = signals_enabled; // 1 if ((signals_blocked || !enabled) && (sig == SIGIO)) { if (!signals_blocked && time_travel_mode == TT_MODE_EXTERNAL) sigio_run_timetravel_handlers() _sigio_handler() sigio_reg_handler() ... as above ... vhost_user_recv_header() // reads 8 bytes that were message payload // as if it were header - but aborts since // it then gets -EAGAIN ... --> end signal handler --> // continue in vhost_user_recv() // full_read() for 8 bytes payload busy loops // entire process hangs here Conceptually, to fix this, we need to ensure that the signal handler cannot run while we hard-unblock signals. The thing that makes this more complex is that we can be doing hard-block/unblock while unblocking. Introduce a new signals_blocked_pending variable that we can keep at non-zero as long as pending signals are being processed, then we only need to ensure it's decremented safely and the signal handler will only increment it if it's already non-zero (or signals_blocked is set, of course.) Note also that only the outermost call to hard-unblock is allowed to decrement signals_blocked_pending, since it could otherwise reach zero in an inner call, and leave the same race happening if the timetravel_handler loops, but that's basically required of it. Fixes: d6b399a0 ("um: time-travel/signals: fix ndelay() in interrupt") Link: https://patch.msgid.link/20240703110144.28034-2-johannes@sipsolutions.netSigned-off-by: -
Johannes Berg authored
This function is unused and unneeded, remove it. Link: https://patch.msgid.link/20240703130105.02b3a974acb7.I7264821f7cfa17ea713b7a3e4787aa41a3107d01@changeidSigned-off-by:
-
Jeff Johnson authored
With ARCH=um, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in fs/hostfs/hostfs.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240702-md-um-fs-hostfs-v1-1-fd2b565027e7@quicinc.comSigned-off-by:
-
Jeff Johnson authored
With ARCH=um, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/um/drivers/harddog.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Johannes Berg authored
With external time travel, a LOT of message can end up being exchanged on the socket, taking a significant amount of time just to do that. Add a new shared memory optimisation to that, where a number of changes are made: - the controller sends a client ID and a shared memory FD (and a logging FD we don't use) in the ACK message to the initial START - the shared memory holds the current time and the free_until value, so that there's no need to exchange messages for that - if the client that's running has shared memory support, any client (the running one included) can request the next time it wants to run inside the shared memory, rather than sending a message, by also updating the free_until value - when shared memory is enabled, RUN/WAIT messages no longer have an ACK, further cutting down on messages Together, this can reduce the number of messages very significantly, and reduce overall test/simulation run time. Co-developed-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Johannes Berg authored
For the upcoming shared-memory time-travel external optimisations, we need to be able to mmap/mremap. Add the necessary OS calls. Link: https://patch.msgid.link/20240702192118.ca4472963638.Ic2da1d3a983fe57340c1b693badfa9c5bd2d8c61@changeidSigned-off-by:
-
Johannes Berg authored
Change os_rcv_fd() to os_rcv_fd_msg() that can more generally receive any number of FDs in any kind of message. Link: https://patch.msgid.link/20240702192118.40b78b2bfe4e.Ic6ec12d72630e5bcae1e597d6bd5c6f29f441563@changeidSigned-off-by:
-
Mordechay Goodstein authored
Add a message type to the time-travel protocol to broadcast a small (64-bit) value to all participants in a simulation. The main use case is to have an identical message come to all participants in a simulation, e.g. to separate out logs for different tests running in a single simulation. Down in the guts of time_travel_handle_message() we can't use printk() and not even printk_deferred(), so just store the message and print it at the start of the userspace() function. Unfortunately this means that other prints in the kernel can actually bypass the message, but in most cases where this is used, for example to separate test logs, userspace will be involved. Also, even if we could use printk_deferred(), we'd still need to flush it out in the userspace() function since otherwise userspace messages might cross it. As a result, this is a reasonable compromise, there's no need to have any core changes and it solves the main use case we have for it. Signed-off-by:
-
Johannes Berg authored
dev_t is a kernel type and may have different definitions in kernel and userspace. On 32-bit x86 this currently makes the stat structure being 4 bytes longer in the user code, causing stack corruption. However, this is (potentially) not the only problem, since dev_t is a different type on user/kernel side, so we don't know that the major/minor encoding isn't also different. Decode/encode it instead to address both problems. Cc: stable@vger.kernel.org Fixes: 74ce793b ("hostfs: Fix ephemeral inodes") Link: https://patch.msgid.link/20240702092440.acc960585dd5.Id0767e12f562a69c6cd3c3262dc3d765db350cf6@changeidSigned-off-by:
-
Johannes Berg authored
We can select ARCH_HAS_UBSAN, it works just fine. It had been enabled and we even used it, but then commit 890a6481 ("ubsan: Restore dependency on ARCH_HAS_UBSAN") (correctly) disabled it again, enable ARCH_HAS_UBSAN to get it. Signed-off-by:
-
Wei Yang authored
Current calculation of max_low_pfn is introduced in commit af84eab2 ("[PATCH] uml: fix LVM crash"). It is intended to set max_low_pfn to the same value as max_pfn. But I am not sure why the max_pfn is set to totalram_pages, which represents the number of usable pages in system instead of an absolute page frame number. (The change history stops there.) While we have already calculate it in setup_physmem(), so not necessary to do it again. Also this would help changing totalram_pages accounting, since we plan to move the accounting into __free_pages_core(). With this change, totalram_pages may not represent the total usable pages at this point, since some pages would be deferred initialized. Signed-off-by:
Wei Yang <richard.weiyang@gmail.com> CC: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Alasdair G Kergon <agk@redhat.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Mike Rapoport (IBM) <rppt@kernel.org> CC: David Hildenbrand <david@redhat.com> Acked-by:
Mike Rapoport (IBM) <rppt@kernel.org> Link: https://patch.msgid.link/20240615034150.2958-1-richard.weiyang@gmail.comSigned-off-by:
-
David Gow authored
At present, Rust in the kernel only supports 64-bit x86, so UML has followed suit. However, it's significantly easier to support 32-bit i386 on UML than on bare metal, as UML does not use the -mregparm option (which alters the ABI), which is not yet supported by rustc[1]. Add support for CONFIG_RUST on um/i386, by adding a new target config to generate_rust_target, and replacing various checks on CONFIG_X86_64 to also support CONFIG_X86_32. We still use generate_rust_target, rather than a built-in rustc target, in order to match x86_64, provide a future place for -mregparm, and more easily disable floating point instructions. With these changes, the KUnit tests pass with: kunit.py run --make_options LLVM=1 --kconfig_add CONFIG_RUST=y --kconfig_add CONFIG_64BIT=n --kconfig_add CONFIG_FORTIFY_SOURCE=n An earlier version of these changes was proposed on the Rust-for-Linux github[2]. [1]: https://github.com/rust-lang/rust/issues/116972 [2]: https://github.com/Rust-for-Linux/linux/pull/966Signed-off-by:
David Gow <davidgow@google.com> Link: https://patch.msgid.link/20240604224052.3138504-1-davidgow@google.comSigned-off-by:
-
David Gow authored
The Rust compiler can take a target config from 'target.json', which is generated by scripts/generate_rust_target.rs. It used to be that all Linux architectures used this to generate a target.json, but now architectures must opt-in to this, or they will default to the Rust compiler's built-in target definition. This is mostly okay for (64-bit) x86 and UML, except that it can generate SSE instructions, which we can't use in the kernel. So re-instate the custom target.json, which disables SSE (and generally enables the 'soft-float' feature). This fixes the following compile error: error: <unknown>:0:0: in function _RNvMNtCs5QSdWC790r4_4core3f32f7next_up float (float): SSE register return with SSE disabled Fixes: f82811e2 ("rust: Refactor the build target to allow the use of builtin targets") Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Tested-by:
Miguel Ojeda <ojeda@kernel.org> Reviewed-by:
-
Tiwei Bie authored
Currently /proc/sysemu will never be registered, as sysemu_supported is initialized to zero implicitly and no code updates it. And there is also nothing to configure via sysemu in UML anymore. Signed-off-by:
Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20240527134024.1539848-3-tiwei.btw@antgroup.comSigned-off-by:
-
Tiwei Bie authored
It's no longer used. And uml_ncpus_setup doesn't exist anymore. Signed-off-by:
-
Dr. David Alan Gilbert authored
Commit fb5d1d38 ("ubd: open the backing files in ubd_add") removed the last use of ubd_mutex. Remove it. Build and kernel startup test only. Signed-off-by:
Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20240505001508.255096-1-linux@treblig.orgSigned-off-by:
-
Johannes Berg authored
We need to have the = as part of the option so that the value can be parsed properly. Also document that it must be given in nanoseconds, not seconds. Fixes: 06503870 ("um: Support time travel mode") Link: https://patch.msgid.link/20240417102744.14b9a9d4eba0.Ib22e9136513126b2099d932650f55f193120cd97@changeidSigned-off-by:
-
Niklas Schnelle authored
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. UML supports these via its UML_IOMEM_EMULATION so let that select HAS_IOPORT and also reflect this in NO_IOPORT_MAP. Co-developed-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Link: https://patch.msgid.link/20240403124300.65379-2-schnelle@linux.ibm.comSigned-off-by:
-
Anton Ivanov authored
Remove the pcap driver in UML. It is obsolete. It does not build on recent systems due to changes in libpcap and its dependencies. The vector driver's raw transport in UML provides identical functionality. Signed-off-by:
-
Benjamin Berg authored
When in time-travel mode (infinite-cpu or external) time should not pass for writing to the console. As such, it makes sense to put the FD for the output side into blocking mode and simply let any write to it hang. If we did not do this, then time could pass waiting for the console to become writable again. This is not desirable as it has random effects on the clock between runs. Implement this by duplicating the FD if output is active in a relevant mode and setting the duplicate to be blocking. This avoids changing the input channel to be blocking should it exists. After this, use the blocking FD for all write operations and do not allocate an IRQ it is set. Without time-travel mode fd_out will always match fd_in and IRQs are registered. Signed-off-by:
-
Benjamin Berg authored
In the next commit, we are going to set the output FD to be blocking. Once that is done, the write() may be short if an interrupt happens while it is writing out data. As such, to properly catch an EINTR error, we need to retry the write. Signed-off-by:
-
Benjamin Berg authored
If the read/write function returns an error then we expect to see an event/IRQ later on. However, this will only happen after an EAGAIN as we are using edge based event triggering. As such, EINTR needs to be caught should it happen. Signed-off-by:
-
