As HD-audio driver does deferred probe internally via workqueue, the
driver might go into the mixed state doing both probe and remove when
the module gets unloaded during the probe work.  This eventually
triggers an Oops, unsurprisingly.

For avoiding this race, we just need to flush the pending probe work
explicitly before actually starting the resource release.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=960710
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the generic codec driver is specified via model option or such,
the hda driver doesn't try to load the generic driver module but still
loads the codec-specific driver, and this ends up with the binding
failure.

This patch fixes it by moving the generic module request in the common
helper code.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently HD-audio driver on Intel Skylake or Broxteon gives an error
message when binding with i915 audio component fails.  However, this
isn't any serious error on a system without Intel graphics.  Indeed
there are such systems, where a third-party codec (e.g. Creative) is
put on the mobo while using other discrete GPU (e.g. Nvidia).
Printing a kernel "error" message is overreaction in such a case.

This patch downgrades the print level for that message.  For systems
that mandate the i915 binding (e.g. Haswell or Broadwell HDMI/DP),
another kernel error message is shown in addition to make clear what
went wrong.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since commit 49af54ff ("misc: atmel-ssc: prepare clock only when
request") the SSC driver expects clients to manage the SSC clock.
This updates the at73c213 driver to enable the SSC clock whenever it is
needed.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When a TLV ioctl with numid zero is handled, the driver may spew a
kernel warning with a stack trace at each call.  The check was
intended obviously only for a kernel driver, but not for a user
interaction.  Let's fix it.

This was spotted by syzkaller fuzzer.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This reverts one hunk of
commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.

In this case, we are copying from a struct snd_seq_port_info32 to a
struct snd_seq_port_info, but the latter is 4 bytes longer than the
32-bit version, so we need to separate kmalloc and copy calls.

Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()')
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This reverts one hunk of
commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.

In this case, we are copying from a struct snd_pcm_hw_params32 to
a struct snd_pcm_hw_params, but the latter is 4 bytes longer than
the 32-bit version, so we need to separate kmalloc and copy calls.

This actually leads to an out-of-bounds memory access later on
in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan).

Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()')
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

hrtimer_cancel() waits for the completion from the callback, thus it
must not be called inside the callback itself.  This was already a
problem in the past with ALSA hrtimer driver, and the early commit
[fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it.

However, the previous fix is still insufficient: it may still cause a
lockup when the ALSA timer instance reprograms itself in its callback.
Then it invokes the start function even in snd_timer_interrupt() that
is called in hrtimer callback itself, results in a CPU stall.  This is
no hypothetical problem but actually triggered by syzkaller fuzzer.

This patch tries to fix the issue again.  Now we call
hrtimer_try_to_cancel() at both start and stop functions so that it
won't fall into a deadlock, yet giving some chance to cancel the queue
if the functions have been called outside the callback.  The proper
hrtimer_cancel() is called in anyway at closing, so this should be
enough.
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass
speaker output pin as other N550 models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This is a minor code cleanup without any functional changes:
- Kill keep_flag argument from _snd_timer_stop(), as all callers pass
  only it false.
- Remove redundant NULL check in _snd_timer_stop().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A slave timer instance might be still accessible in a racy way while
operating the master instance as it lacks of locking.  Since the
master operation is mostly protected with timer->lock, we should cope
with it while changing the slave instance, too.  Also, some linked
lists (active_list and ack_list) of slave instances aren't unlinked
immediately at stopping or closing, and this may lead to unexpected
accesses.

This patch tries to address these issues.  It adds spin lock of
timer->lock (either from master or slave, which is equivalent) in a
few places.  For avoiding a deadlock, we ensure that the global
slave_active_lock is always locked at first before each timer lock.

Also, ack and active_list of slave instances are properly unlinked at
snd_timer_stop() and snd_timer_close().

Last but not least, remove the superfluous call of _snd_timer_stop()
at removing slave links.  This is a noop, and calling it may confuse
readers wrt locking.  Further cleanup will follow in a later patch.

Actually we've got reports of use-after-free by syzkaller fuzzer, and
this hopefully fixes these issues.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Another Dell model, another fixup entry: Latitude E6540 needs the same
fixup as other Latitude E series as workaround for noise problems.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104341
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA timer ioctls have an open race and this may lead to a
use-after-free of timer instance object.  A simplistic fix is to make
each ioctl exclusive.  We have already tread_sem for controlling the
tread, and extend this as a global mutex to be applied to each ioctl.

The downside is, of course, the worse concurrency.  But these ioctls
aren't to be parallel accessible, in anyway, so it should be fine to
serialize there.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds codec ID (0x8086280b) for Kabylake display codec
and apply the hsw fix-ups to Kabylake.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA timer instance object has a couple of linked lists and they are
unlinked unconditionally at snd_timer_stop().  Meanwhile
snd_timer_interrupt() unlinks it, but it calls list_del() which leaves
the element list itself unchanged.  This ends up with unlinking twice,
and it was caught by syzkaller fuzzer.

The fix is to use list_del_init() variant properly there, too.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commit [da6d2769: ALSA: usb-audio: Add resume support for
Native Instruments controls] brought a regression where the Native
Instrument audio devices don't get the correct value at update due to
the missing shift at writing.  This patch addresses it.

Fixes: da6d2769 ('ALSA: usb-audio: Add resume support for Native Instruments controls')
Reported-and-tested-by: Owen Williams <owilliams@mixxx.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The machine uses codec alc255, and the pin configuration value for
pin 0x14 on this machine is 0x90171130 which is not in the pin quirk
table yet.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1533461Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Dell Latitude E5550 (1028:062c) has a white noise problem like other
Latitude E models, and it gets fixed by the very same quirk as well.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110591
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently the info in /proc/interrupts doesn't allow to figure out which
interrupt belongs to which card (HDMI, PCH, ..).
Therefore add card details to the interrupt description.
With the patch the info in /proc/interrupts looks like this:

PCI-MSI 442368-edge      snd_hda_intel:card1
PCI-MSI 49152-edge      snd_hda_intel:card0

NOTE: this patch adds the new irq_descr field snd_card struct that is
filled automatically at a card object creation.  This can be used
generically for other drivers as well.  The changes for others will
follow later -- tiwai
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA sequencer code has an open race between the timer setup ioctl and
the close of the client.  This was triggered by syzkaller fuzzer, and
a use-after-free was caught there as a result.

This patch papers over it by adding a proper queue->timer_mutex lock
around the timer-related calls in the relevant code path.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear()
unconditionally even if there is no FIFO assigned, and this leads to
an Oops due to NULL dereference.  The fix is just to add a proper NULL
check.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA PCM may still have a leftover instance after disconnection and
it delays its release.  The problem is that the PCM close code path of
USB-audio driver has a call of snd_usb_autosuspend().  This involves
with the call of usb_autopm_put_interface() and it may lead to a
kernel Oops due to the NULL object like:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
 IP: [<ffffffff815ae7ef>] usb_autopm_put_interface+0xf/0x30 PGD 0
 Call Trace:
  [<ffffffff8173bd94>] snd_usb_autosuspend+0x14/0x20
  [<ffffffff817461bc>] snd_usb_pcm_close.isra.14+0x5c/0x90
  [<ffffffff8174621f>] snd_usb_playback_close+0xf/0x20
  [<ffffffff816ef58a>] snd_pcm_release_substream.part.36+0x3a/0x90
  [<ffffffff816ef6b3>] snd_pcm_release+0xa3/0xb0
  [<ffffffff816debb0>] snd_disconnect_release+0xd0/0xe0
  [<ffffffff8114d417>] __fput+0x97/0x1d0
  [<ffffffff8114d589>] ____fput+0x9/0x10
  [<ffffffff8109e452>] task_work_run+0x72/0x90
  [<ffffffff81088510>] do_exit+0x280/0xa80
  [<ffffffff8108996a>] do_group_exit+0x3a/0xa0
  [<ffffffff8109261f>] get_signal+0x1df/0x540
  [<ffffffff81040903>] do_signal+0x23/0x620
  [<ffffffff8114c128>] ? do_readv_writev+0x128/0x200
  [<ffffffff810012e1>] prepare_exit_to_usermode+0x91/0xd0
  [<ffffffff810013ba>] syscall_return_slowpath+0x9a/0x120
  [<ffffffff817587cd>] ? __sys_recvmsg+0x5d/0x70
  [<ffffffff810d2765>] ? ktime_get_ts64+0x45/0xe0
  [<ffffffff8115dea0>] ? SyS_poll+0x60/0xf0
  [<ffffffff818d2327>] int_ret_from_sys_call+0x25/0x8f

We have already a check of disconnection in snd_usb_autoresume(), but
the check is missing its counterpart.  The fix is just to put the same
check in snd_usb_autosuspend(), too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Last updates for v4.5

A bunch more updates for v4.5, mainly driver work:

 - More topology API enhancements from Mengdong Lin working towards
   making everything more component based and being able to specify PCM
   links via topology.
 - Large sets driver updates from Cirrus, Intel (mainly more Skylake
   support) and Renesas.
 - New driver for AMD ACP
 - Rename PCM1792a driver to be generic pcm179x

ASoC: Updates for v4.5

This is quite a busy release on the driver front with a lot of new
drivers being added but comparatively quiet on the core side with only
one big change going in and that a fairly straightforward refactoring.

 - Conversion of the array of DAI links to a list by Mengdong Lin,
   supporting dynamically adding and removing DAI links.
 - Some more fixes for the topology code, though it is still not final
   and ready for enabling in production.  We really need to get to the
   point where that can be done.
 - A pile of changes for Intel SkyLake drivers which hopefully deliver
   some useful initial functionality for systems with this chipset,
   though there is more work still to come.
 - New drivers for a number of Imagination Technologies IPs.
 - Lots of new features and cleanups for the Renesas drivers.
 - ANC support for WM5110.
 - New driver for Atmel class D speaker drivers.
 - New drivers for Cirrus CS47L24 and WM1831.
 - New driver for Dialog DA7128.
 - New drivers for Realtek RT5659 and RT56156.
 - New driver for Rockchip RK3036.
 - New driver for TI PC3168A

# gpg: Signature made Wed 23 Dec 2015 00:42:40 GMT using RSA key ID 5D5487D0
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3F25 68AA C269 98F9 E813  A1C5 C3F4 36CA 30F5 D8EB
#      Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2  9FEA 24D6 8B72 5D54 87D0

ASoC: Last minute fixes for v4.4

A few final fixes for v4.4, the main one being the two patches to the
new Sky Lake drivers which fix a previous incorrect fix that went in
during an earlier -rc.

# gpg: Signature made Wed 06 Jan 2016 17:12:57 GMT using RSA key ID 5D5487D0
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3F25 68AA C269 98F9 E813  A1C5 C3F4 36CA 30F5 D8EB
#      Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2  9FEA 24D6 8B72 5D54 87D0