- 20 Sep, 2022 6 commits
-
-
Christoph Hellwig authored
erofs uses an additional address space for compressed data read from disk in addition to the one directly associated with the inode. Reading into the lower address space is open coded using add_to_page_cache_lru instead of using the filemap.c helper for page allocation micro-optimizations, which means it is not covered by the MM PSI annotations for ->read_folio and ->readahead, so add manual ones instead. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20220915094200.139713-5-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
btrfs compressed reads try to always read the entire compressed chunk, even if only a subset is requested. Currently this is covered by the magic PSI accounting underneath submit_bio, but that is about to go away. Instead add manual psi_memstall_{enter,leave} annotations. Note that for readahead this really should be using readahead_expand, but the additionals reads are also done for plain ->read_folio where readahead_expand can't work, so this overall logic is left as-is for now. Signed-off-by:David Sterba <dsterba@suse.com> Acked-by:
-
Christoph Hellwig authored
To properly account for all refaults from file system logic, file systems need to call psi_memstall_enter directly, so export it. Signed-off-by:
-
Christoph Hellwig authored
PSI tries to account for the cost of bringing back in pages discarded by the MM LRU management. Currently the prime place for that is hooked into the bio submission path, which is a rather bad place: - it does not actually account I/O for non-block file systems, of which we have many - it adds overhead and a layering violation to the block layer Add the accounting into the two places in the core MM code that read pages into an address space by calling into ->read_folio and ->readahead so that the entire file system operations are covered, to broaden the coverage and allow removing the accounting in the block layer going forward. As psi_memstall_enter can deal with nested calls this will not lead to double accounting even while the bio annotations are still present. Signed-off-by:
-
Ping-Xiang Chen authored
This patch fix a comment typo in block-core.c. Signed-off-by:
Ping-Xiang Chen <p.x.chen@uci.edu> Reviewed-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "nvme updates for Linux 6.1 - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)" * tag 'nvme-6.1-2022-09-20' of git://git.infradead.org/nvme: nvme-tcp: print actual source IP address through sysfs "address" attr nvmet-tcp: don't map pages which can't come from HIGHMEM nvme-pci: move iod dma_len fill gaps nvme-pci: iod npages fits in s8 nvme-pci: iod's 'aborted' is a bool nvme-pci: remove nvme_queue from nvme_iod nvme: consider also host_iface when checking ip options nvme-rdma: handle number of queue changes nvme-tcp: handle number of queue changes nvmet: expose max queues to configfs nvmet: avoid unnecessary flush bio nvmet-auth: remove redundant parameters req nvmet-auth: clean up with done_kfree nvme-auth: remove the redundant req->cqe->result.u16 assignment operation nvme: move from strlcpy with unused retval to strscpy nvme: add comment for unaligned "fake" nqn
-
- 19 Sep, 2022 21 commits
-
-
Coly Li authored
Inside set_at_max_writeback_rate() the calculation in following if() check is wrong, if (atomic_inc_return(&c->idle_counter) < atomic_read(&c->attached_dev_nr) * 6) Because each attached backing device has its own writeback thread running and increasing c->idle_counter, the counter increates much faster than expected. The correct calculation should be, (counter / dev_nr) < dev_nr * 6 which equals to, counter < dev_nr * dev_nr * 6 This patch fixes the above mistake with correct calculation, and helper routine idle_counter_exceeded() is added to make code be more clear. Reported-by:
Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by:
Coly Li <colyli@suse.de> Acked-by:
-
Jilin Yuan authored
Delete the redundant word 'we'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
-
Jules Maselbas authored
Remove the redundant word `by`, correct the typo `creaated`. CC: Kent Overstreet <kent.overstreet@gmail.com> CC: linux-bcache@vger.kernel.org Signed-off-by:
Jules Maselbas <jmaselbas@kalray.eu> Signed-off-by:
-
Lin Feng authored
This is a cleanup for commit 1616a4c2 ("bcache: remove bcache device self-defined readahead")', currently no user for bch_mark_cache_readahead() since that commit. Signed-off-by:
Lin Feng <linf@wangsu.com> Signed-off-by:
-
Li Lei authored
All pending works will be drained by destroy_workqueue(), no need to call flush_workqueue() explicitly. Signed-off-by:
Li Lei <lilei@szsandstone.com> Signed-off-by:
-
Martin Belanger authored
TCP transport relies on the routing table to determine which source address and interface to use when making a connection. Currently, there is no way to tell from userspace where a connection was made. This patch exposes the actual source address using a new field named "src_addr=" in the "address" attribute. This is needed to diagnose and identify connectivity issues. With the source address we can infer the interface associated with each connection. This was tested with nvme-cli 2.0 to verify it does not have any adverse effect. The new "src_addr=" field will simply be displayed in the output of the "list-subsys" or "list -v" commands as shown here. $ nvme list-subsys nvme-subsys0 - NQN=nqn.2014-08.org.nvmexpress.discovery \ +- nvme0 tcp traddr=192.168.56.1,trsvcid=8009,src_addr=192.168.56.101 live Signed-off-by:
Martin Belanger <martin.belanger@dell.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
-
Fabio M. De Francesco authored
kmap() is being deprecated in favor of kmap_local_page().[1] There are two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. The pages which will be mapped are allocated in nvmet_tcp_map_data(), using the GFP_KERNEL flag. This assures that they cannot come from HIGHMEM. This imply that a straight page_address() can replace the kmap() of sg_page(sg) in nvmet_tcp_map_pdu_iovec(). As a side effect, we might also delete the field "nr_mapped" from struct "nvmet_tcp_cmd" because, after removing the kmap() calls, there would be no longer any need of it. In addition, there is no reason to use a kvec for the command receive data buffers iovec, use a bio_vec instead and let iov_iter handle the buffer mapping and data copy. Test with blktests on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with HIGHMEM64GB enabled. [1] "[PATCH] checkpatch: Add kmap and kmap_atomic to the deprecated list" https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/ Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com> Cc: Keith Busch <kbusch@kernel.org> Suggested-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> [sagi: added bio_vec plus minor naming changes] Signed-off-by:
-
Keith Busch authored
The 32-bit field, dma_len, packs better in the iod struct above the dma_addr_t on 64-bit systems. Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Keith Busch authored
The largest allowed transfer is 4MB, which can use at most 1025 PRPs. Each PRP is 8 bytes, so the maximum number of 4k nvme pages needed for the iod_list is 3, which fits in an 's8' type. While modifying this field, change the name to "nr_allocations" to better represent that this is referring to the number of units allocated from a dma_pool. Also introduce a BUILD_BUG_ON to ensure we never accidently increase the largest transfer limit beyond 127 chained prp lists. Reviewed-by:
-
Keith Busch authored
It's only true or false, so make this a bool to reflect that and save some space in nvme_iod. Reviewed-by:
-
Keith Busch authored
We can get the nvme_queue from the req just as easily, so remove the duplicate path to the same structure to save some space. Signed-off-by:
-
Daniel Wagner authored
It's perfectly fine to use the same traddr and trsvcid more than once as long we use different host interface. This is used in setups where the host has more than one interface but the target exposes only one traddr/trsvcid combination. Use the same acceptance rules for host_iface as we have for host_traddr. Signed-off-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Chao Leng <lengchao@huawei.com> Signed-off-by:
-
Daniel Wagner authored
On reconnect, the number of queues might have changed. In the case where we have more queues available than previously we try to access queues which are not initialized yet. The other case where we have less queues than previously, the connection attempt will fail because the target doesn't support the old number of queues and we end up in a reconnect loop. Thus, only start queues which are currently present in the tagset limited by the number of available queues. Then we update the tagset and we can start any new queue. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Daniel Wagner authored
On reconnect, the number of queues might have changed. In the case where we have more queues available than previously we try to access queues which are not initialized yet. The other case where we have less queues than previously, the connection attempt will fail because the target doesn't support the old number of queues and we end up in a reconnect loop. Thus, only start queues which are currently present in the tagset limited by the number of available queues. Then we update the tagset and we can start any new queue. Signed-off-by:
-
Daniel Wagner authored
Allow to set the max queues the target supports. This is useful for testing the reconnect attempt of the host with changing numbers of supported queues. Signed-off-by:
-
Guixin Liu authored
For no volatile write cache block device backend, sending flush bio is unnecessary, avoid to do that. Signed-off-by:
Guixin Liu <kanie@linux.alibaba.com> Reviewed-by:
-
Genjian Zhang authored
The parameter is not used in this function, so remove it. Signed-off-by:
Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by:
-
Jackie Liu authored
Jump directly to done_kfree to release d, which is consistent with the code style behind. Reported-by:
Jackie Liu <liuyun01@kylinos.cn> Reviewed-by:
-
Jackie Liu authored
req->cqe->result.u16 has already been assigned in the previous line, no need to do it again. Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Linjun Bao authored
Current "fake" nqn field is "nqn.2014.08.org.nvmexpress:", it is not aligned with the canonical version for history reasons. Signed-off-by:
Linjun Bao <meljbao@gmail.com> Signed-off-by:
-
- 12 Sep, 2022 9 commits
-
-
Gaosheng Cui authored
w_start_resync has been removed since commit ac0acb9e ("drbd: use drbd_device_post_work() in more places"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by:
-
Yu Kuai authored
tg_update_disptime() only need to adjust postion for 'tg' in 'parent_sq', there is no need to call throtl_enqueue/dequeue_tg(), since they will set/clear flag THROTL_TG_PENDING and increase/decrease nr_pending, which is useless. By the way, clear the flag/decrease nr_pending while there are still throttled bios is not good for debugging. There are no functional changes. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220827101637.1775111-4-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
It's a little weird to call throtl_dequeue_tg() unconditionally in throtl_select_dispatch(), since it will be called in tg_update_disptime() again if some bio is still throttled. Thus call it later if there are no throttled bio. There are no functional changes. Signed-off-by:
-
Yu Kuai authored
Make the code easier to read, like everywhere else. Signed-off-by:
-
Yu Kuai authored
If new configuration is submitted while a bio is throttled, then new waiting time is recalculated regardless that the bio might already wait for some time: tg_conf_updated throtl_start_new_slice tg_update_disptime throtl_schedule_next_dispatch Then io hung can be triggered by always submmiting new configuration before the throttled bio is dispatched. Fix the problem by respecting the time that throttled bio already waited. In order to do that, add new fields to record how many bytes/io are waited, and use it to calculate wait time for throttled bio under new configuration. Some simple test: 1) cd /sys/fs/cgroup/blkio/ echo $$ > cgroup.procs echo "8:0 2048" > blkio.throttle.write_bps_device { sleep 2 echo "8:0 1024" > blkio.throttle.write_bps_device } & dd if=/dev/zero of=/dev/sda bs=8k count=1 oflag=direct 2) cd /sys/fs/cgroup/blkio/ echo $$ > cgroup.procs echo "8:0 1024" > blkio.throttle.write_bps_device { sleep 4 echo "8:0 2048" > blkio.throttle.write_bps_device } & dd if=/dev/zero of=/dev/sda bs=8k count=1 oflag=direct test results: io finish time before this patch with this patch 1) 10s 6s 2) 8s 6s Signed-off-by:Michal Koutný <mkoutny@suse.com> Acked-by:
-
Yu Kuai authored
No functional changes, new apis will be used in later patches to calculate wait time for throttled bios when new configuration is submitted. Noted this patch also rename tg_with_in_iops/bps_limit() to tg_within_iops/bps_limit(). Signed-off-by:
-
Yu Kuai authored
There is a problem found by code review in tg_with_in_bps_limit() that 'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by calling mul_u64_u64_div_u64() instead. Signed-off-by:
-
Yu Kuai authored
Test scripts: cd /sys/fs/cgroup/blkio/ echo "8:0 1024" > blkio.throttle.write_bps_device echo $$ > cgroup.procs dd if=/dev/zero of=/dev/sda bs=10k count=1 oflag=direct & dd if=/dev/zero of=/dev/sda bs=10k count=1 oflag=direct & Test result: 10240 bytes (10 kB, 10 KiB) copied, 10.0134 s, 1.0 kB/s 10240 bytes (10 kB, 10 KiB) copied, 10.0135 s, 1.0 kB/s The problem is that the second bio is finished after 10s instead of 20s. Root cause: 1) second bio will be flagged: __blk_throtl_bio while (true) { ... if (sq->nr_queued[rw]) -> some bio is throttled already break }; bio_set_flag(bio, BIO_THROTTLED); -> flag the bio 2) flagged bio will be dispatched without waiting: throtl_dispatch_tg tg_may_dispatch tg_with_in_bps_limit if (bps_limit == U64_MAX || bio_flagged(bio, BIO_THROTTLED)) *wait = 0; -> wait time is zero return true; commit 9f5ede3c ("block: throttle split bio in case of iops limit") support to count split bios for iops limit, thus it adds flagged bio checking in tg_with_in_bps_limit() so that split bios will only count once for bps limit, however, it introduce a new problem that io throttle won't work if multiple bios are throttled. In order to fix the problem, handle iops/bps limit in different ways: 1) for iops limit, there is no flag to record if the bio is throttled, and iops is always applied. 2) for bps limit, original bio will be flagged with BIO_BPS_THROTTLED, and io throttle will ignore bio with the flag. Noted this patch also remove the code to set flag in __bio_clone(), it's introduced in commit 111be883 ("block-throttle: avoid double charge"), and author thinks split bio can be resubmited and throttled again, which is wrong because split bio will continue to dispatch from caller. Fixes: 9f5ede3c ("block: throttle split bio in case of iops limit") Cc: <stable@vger.kernel.org> Signed-off-by: -
Keith Busch authored
Batched completions can clear multiple bits, but we're only decrementing the wait_cnt by one each time. This can cause waiters to never be woken, stalling IO. Use the batched count instead. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215679Signed-off-by:
-
- 08 Sep, 2022 3 commits
-
-
Uros Bizjak authored
Use atomic_long_try_cmpxchg instead of atomic_long_cmpxchg (*ptr, old, new) == old in __sbitmap_queue_get_batch. x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, atomic_long_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg fails, enabling further code simplifications, e.g. an extra memory read can be avoided in the loop. No functional change intended. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20220908151200.9993-1-ubizjak@gmail.comSigned-off-by:
-
Shigeru Yoshida authored
syzbot reported hung task [1]. The following program is a simplified version of the reproducer: int main(void) { int sv[2], fd; if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0) return 1; if ((fd = open("/dev/nbd0", 0)) < 0) return 1; if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0) return 1; if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0) return 1; if (ioctl(fd, NBD_DO_IT) < 0) return 1; return 0; } When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs. This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl(). Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1] Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com Signed-off-by:Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.comSigned-off-by:
-
Jan Kara authored
When __sbq_wake_up() decrements wait_cnt to 0 but races with someone else waking the waiter on the waitqueue (so the waitqueue becomes empty), it exits without reseting wait_cnt to wake_batch number. Once wait_cnt is 0, nobody will ever reset the wait_cnt or wake the new waiters resulting in possible deadlocks or busyloops. Fix the problem by making sure we reset wait_cnt even if we didn't wake up anybody in the end. Fixes: 040b83fc ("sbitmap: fix possible io hung due to lost wakeup") Reported-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220908130937.2795-1-jack@suse.czSigned-off-by:
-
- 05 Sep, 2022 1 commit
-
-
Guoqing Jiang authored
It is not necessary since it is set later just before function return success. Signed-off-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Reviewed-by:
Md Haris Iqbal <haris.iqbal@ionos.com> Link: https://lore.kernel.org/r/20220902100055.25724-4-guoqing.jiang@linux.devSigned-off-by:
-
