- 15 Sep, 2016 1 commit
-
-
Trond Myklebust authored
[ Upstream commit 98b0f80c ] On error, the callers expect us to return without bumping nn->cb_users[]. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v3.7+ Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
- 12 Sep, 2016 17 commits
-
-
Brian Foster authored
[ Upstream commit 800b2694 ] xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit f3d7ebde ] From inspection, the superblock sb_inprogress check is done in the verifier and triggered only for the primary superblock via a "bp->b_bn == XFS_SB_DADDR" check. Unfortunately, the primary superblock is an uncached buffer, and hence it is configured by xfs_buf_read_uncached() with: bp->b_bn = XFS_BUF_DADDR_NULL; /* always null for uncached buffers */ And so this check never triggers. Fix it. cc: <stable@vger.kernel.org> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Aleksandr Makarov authored
[ Upstream commit 40d9c325 ] These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by:
Aleksandr Makarov <aleksandr.o.makarov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alan Stern authored
[ Upstream commit 53e5f36f ] UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Vittorio Zecca <zeccav@gmail.com> Tested-by:
Bjørn Mork <bjorn@mork.no> CC: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit b88fa69e ] Ensure that the client conforms to the normative behaviour described in RFC5661 Section 12.7.2: "If a client believes its lease has expired, it MUST NOT send I/O to the storage device until it has validated its lease." So ensure that we wait for the lease to be validated before using the layout. Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 7ac61a06 ] Any readings from the raw interface of the KXSD9 driver will return an empty string, because it does not return IIO_VAL_INT but rather some random value from the accelerometer to the caller. Cc: stable@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Ian Abbott authored
[ Upstream commit f0f4b0cc ] Commit ebb657ba ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") introduced a backwards compatibility issue in the use of asynchronous commands on the AO subdevice when `start_src` is `TRIG_EXT`. Valid values for `start_src` are `TRIG_INT` (for internal, software trigger), and `TRIG_EXT` (for external trigger). When set to `TRIG_EXT`. In both cases, the driver relies on an internal, software trigger to set things up (allowing the user application to write sufficient samples to the data buffer before the trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case. The software trigger is handled by `ni_ao_inttrig()`. Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg` was required to be 0, and `ni_ao_inttrig()` checked that the software trigger number was also 0. After the above change, when `start_src` was `TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()` checked that the software trigger number matched this `start_arg` value. The backwards compatibility issue is that the internal trigger number now has to match `start_arg` when `start_src` is `TRIG_EXT` when it previously had to be 0. Fix the backwards compatibility issue in `ni_ao_inttrig()` by always allowing software trigger number 0 when `start_src` is something other than `TRIG_INT`. Thanks to Spencer Olson for reporting the issue. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reported-by:
Spencer Olson <olsonse@umich.edu> Fixes: ebb657ba ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") Cc: stable <stable@vger.kernel.org> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Ian Abbott authored
[ Upstream commit 5ca05345 ] For counter subdevices, the `s->insn_write` handler is being set to the wrong function, `ni_tio_insn_read()`. It should be `ni_tio_insn_write()`. Signed-off-by:
Éric Piel <piel@delmic.com> Fixes: 10f74377 ("staging: comedi: ni_tio: make ni_tio_winsn() a proper comedi (*insn_write)" Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by:
-
Ian Abbott authored
[ Upstream commit 80e162ee ] `daqboard2000_find_boardinfo()` is supposed to check if the DaqBoard/2000 series model is supported, based on the PCI subvendor and subdevice ID. The current code is wrong as it is comparing the PCI device's subdevice ID to an expected, fixed value for the subvendor ID. It should be comparing the PCI device's subvendor ID to this fixed value. Correct it. Fixes: 7e8401b2 ("staging: comedi: daqboard2000: add back subsystem_device check") Signed-off-by:
-
Aleksandr Makarov authored
[ Upstream commit 6695593e ] Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by:
-
Li Jun authored
[ Upstream commit c4e94174 ] When the controller is configured to be dual role and it's in host mode, if bind udc and gadgt driver, those gadget operations will do gadget disconnect and finally pull down DP line, which will break host function. Cc: <stable@vger.kernel.org> # 4.1+ Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 3b7c7e52 ] There is an allocation with GFP_KERNEL flag in mos7840_write(), while it may be called from interrupt context. Follow-up for commit 19125283 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 5a5a1d61 ] There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 19125283 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Zefan Li authored
[ Upstream commit 06f4e948 ] A new task inherits cpus_allowed and mems_allowed masks from its parent, but if someone changes cpuset's config by writing to cpuset.cpus/cpuset.mems before this new task is inserted into the cgroup's task list, the new task won't be updated accordingly. Signed-off-by:
Zefan Li <lizefan@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 0956254a ] When a copy up of a directory occurs which has the opaque xattr set, the xattr remains in the upper directory. The immediate behavior with overlayfs is that the upper directory is not treated as opaque, however after a remount the opaque flag is used and upper directory is treated as opaque. This causes files created in the lower layer to be hidden when using multiple lower directories. Fix by not copying up the opaque flag. To reproduce: ----8<---------8<---------8<---------8<---------8<---------8<---- mkdir -p l/d/s u v w mnt mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt rm -rf mnt/d/ mkdir -p mnt/d/n umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt touch mnt/d/foo umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt ls mnt/d ----8<---------8<---------8<---------8<---------8<---------8<---- output should be: "foo n" Reported-by:
Derek McGowan <dmcg@drizz.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 626d2f07 ] The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1 because CHCR.NULLE is set to 1. So, this driver should call usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise, the desc is possible to be NULL in the usb_dmac_isr_transfer_end(). Fixes: 0c1c8ff3 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver) Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit 829fa70d ] A number of fuzzing failures seem to be caused by allocation bitmaps or other metadata blocks being pointed at the superblock. This can cause kernel BUG or WARNings once the superblock is overwritten, so validate the group descriptor blocks to make sure this doesn't happen. Cc: stable@vger.kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
- 11 Sep, 2016 1 commit
-
-
Al Viro authored
[ Upstream commit 76cc404b ] Cc: stable@vger.kernel.org # 3.15+ Reviewed-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 07 Sep, 2016 1 commit
-
-
Ian Abbott authored
[ commit 403fe7f3 upstream. Patch is cut down a bit from upstream patch, as upstream patch fixed parts that don't exist in this version. Also, some identifiers were renamed, so patch description has been edited accordingly -- Ian Abbott ] Commit 73e0e4df ("staging: comedi: comedi_test: fix timer lock-up") fixed a lock-up in the timer routine `waveform_ai_interrupt()` caused by commit 24051247 ("staging: comedi: comedi_test: use comedi_handle_events()"). However, it introduced a race condition that can result in the timer routine misbehaving, such as accessing freed memory or dereferencing a NULL pointer. 73e0... changed the timer routine to do nothing unless a `WAVEFORM_AI_RUNNING` flag was set, and changed `waveform_ai_cancel()` to clear the flag and replace a call to `del_timer_sync()` with a call to `del_timer()`. `waveform_ai_cancel()` may be called from the timer routine itself (via `comedi_handle_events()`), or from `do_cancel()`. (`do_cancel()` is called as a result of a file operation (usually a `COMEDI_CANCEL` ioctl command, or a release), or during device removal.) When called from `do_cancel()`, the call to `waveform_ai_cancel()` is followed by a call to `do_become_nonbusy()`, which frees up stuff for the current asynchronous command under the assumption that it is now safe to do so. The race condition occurs when the timer routine `waveform_ai_interrupt()` checks the `WAVEFORM_AI_RUNNING` flag just before it is cleared by `waveform_ai_cancel()`, and is still running during the call to `do_become_nonbusy()`. In particular, it can lead to a NULL pointer dereference because `do_become_nonbusy()` frees `async->cmd.chanlist` and sets it to `NULL`, but `waveform_ai_interrupt()` dereferences it. Fix the race by calling `del_timer_sync()` instead of `del_timer()` in `waveform_ai_cancel()` when not in an interrupt context. The only time `waveform_ai_cancel()` is called in an interrupt context is when it is called from the timer routine itself, via `comedi_handle_events()`. There is no longer any need for the `WAVEFORM_AI_RUNNING` flag, so get rid of it. Fixes: 73e0e4df ("staging: comedi: comedi_test: fix timer lock-up") Reported-by:
-
- 03 Sep, 2016 6 commits
-
-
Sasha Levin authored
Signed-off-by: -
Simon Horman authored
[ Upstream commit c2e771b0 ] Like the NFP6000, the NFP4000 as an erratum where reading/writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP4000's PF's config space size to 0x600 bytes as is already done for the NFP6000. The NFP4000's VF is 0x6004 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same device ID as the NFP6000's VF. Thus, its config space is already limited by the existing use of quirk_nfp6000(). Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Simon Horman authored
[ Upstream commit 69874ec2 ] Add the device ID for the PF of the NFP4000. The device ID for the VF, 0x6003, is already present as PCI_DEVICE_ID_NETRONOME_NFP6000_VF. Signed-off-by:
-
Jason S. McMullan authored
[ Upstream commit 9f33a2ae ] The NFP6000 has an erratum where reading/writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP6000's config space size to 0x600 bytes. Signed-off-by:
Jason S. McMullan <jason.mcmullan@netronome.com> [simon: edited changelog] Signed-off-by:
-
Jason S. McMullan authored
[ Upstream commit a755e169 ] Device IDs for the Netronome NFP3200, NFP3240, NFP6000, and NFP6000 SR-IOV devices. Signed-off-by:
-
Jason S. McMullan authored
[ Upstream commit c20aecf6 ] If a device quirk modifies the pci_dev->cfg_size to be less than PCI_CFG_SPACE_EXP_SIZE (4096), but greater than PCI_CFG_SPACE_SIZE (256), the PCI sysfs interface truncates the readable size to PCI_CFG_SPACE_SIZE. Allow sysfs access to config space up to cfg_size, even if the device doesn't support the entire 4096-byte PCIe config space. Note that pci_read_config() and pci_write_config() limit access to dev->cfg_size even though pcie_config_attr contains 4096 (the maximum size). Signed-off-by:
-
- 31 Aug, 2016 14 commits
-
-
Vegard Nossum authored
[ Upstream commit 088bf2ff ] seq_read() is a nasty piece of work, not to mention buggy. It has (I think) an old bug which allows unprivileged userspace to read beyond the end of m->buf. I was getting these: BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880 Read of size 2713 by task trinity-c2/1329 CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: kasan_object_err+0x1c/0x80 kasan_report_error+0x2cb/0x7e0 kasan_report+0x4e/0x80 check_memory_region+0x13e/0x1a0 kasan_check_read+0x11/0x20 seq_read+0xcd2/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 entry_SYSCALL64_slow_path+0x25/0x25 Object at ffff880116889100, in cache kmalloc-4096 size: 4096 Allocated: PID = 1329 save_stack_trace+0x26/0x80 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x1aa/0x4a0 seq_buf_alloc+0x35/0x40 seq_read+0x7d8/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 0 (stack is not available) Memory state around the buggy address: ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint This seems to be the same thing that Dave Jones was seeing here: https://lkml.org/lkml/2016/8/12/334 There are multiple issues here: 1) If we enter the function with a non-empty buffer, there is an attempt to flush it. But it was not clearing m->from after doing so, which means that if we try to do this flush twice in a row without any call to traverse() in between, we are going to be reading from the wrong place -- the splat above, fixed by this patch. 2) If there's a short write to userspace because of page faults, the buffer may already contain multiple lines (i.e. pos has advanced by more than 1), but we don't save the progress that was made so the next call will output what we've already returned previously. Since that is a much less serious issue (and I have a headache after staring at seq_read() for the past 8 hours), I'll leave that for now. Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.comSigned-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit b53e7d00 ] The bootloader (U-boot) sometimes uses this timer for various delays. It uses it as a ongoing counter, and does comparisons on the current counter value. The timer counter is never stopped. In some cases when the user interacts with the bootloader, or lets it idle for some time before loading Linux, the timer may expire, and an interrupt will be pending. This results in an unexpected interrupt when the timer interrupt is enabled by the kernel, at which point the event_handler isn't set yet. This results in a NULL pointer dereference exception, panic, and no way to reboot. Clear any pending interrupts after we stop the timer in the probe function to avoid this. Cc: stable@vger.kernel.org Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Mike Snitzer authored
[ Upstream commit 299f6230 ] v4.8-rc3 commit 99f3c90d ("dm flakey: error READ bios during the down_interval") overlooked the 'drop_writes' feature, which is meant to allow reads to be issued rather than errored, during the down_interval. Fixes: 99f3c90d ("dm flakey: error READ bios during the down_interval") Reported-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Beulich authored
[ Upstream commit 9a035a40 ] This should really only be done for XS_TRANSACTION_END messages, or else at least some of the xenstore-* tools don't work anymore. Fixes: 0beef634 ("xenbus: don't BUG() on user mode induced condition") Reported-by:
Richard Schütz <rschuetz@uni-koblenz.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit 2e63ad4b ] native_smp_prepare_cpus -> default_setup_apic_routing -> enable_IR_x2apic -> irq_remapping_prepare -> intel_prepare_irq_remapping -> intel_setup_irq_remapping So IR table is setup even if "noapic" boot parameter is added. As a result we crash later when the interrupt affinity is set due to a half initialized remapping infrastructure. Prevent remap initialization when IOAPIC is disabled. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
John Stultz authored
[ Upstream commit a4f8f666 ] It was reported that hibernation could fail on the 2nd attempt, where the system hangs at hibernate() -> syscore_resume() -> i8237A_resume() -> claim_dma_lock(), because the lock has already been taken. However there is actually no other process would like to grab this lock on that problematic platform. Further investigation showed that the problem is triggered by setting /sys/power/pm_trace to 1 before the 1st hibernation. Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend, and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller than 1970) to the release date of that motherboard during POST stage, thus after resumed, it may seem that the system had a significant long sleep time which is a completely meaningless value. Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the sleep time happened to be set to 1, fls() returns 32 and we add 1 to sleep_time_bin[32], which causes an out of bounds array access and therefor memory being overwritten. As depicted by System.map: 0xffffffff81c9d080 b sleep_time_bin 0xffffffff81c9d100 B dma_spin_lock the dma_spin_lock.val is set to 1, which caused this problem. This patch adds a sanity check in tk_debug_account_sleep_time() to ensure we don't index past the sleep_time_bin array. [jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the issue slightly differently, but borrowed his excelent explanation of the issue here.] Fixes: 5c83545f "power: Add option to log time spent in suspend" Reported-by:
Janek Kozicki <cosurgi@gmail.com> Reported-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: linux-pm@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xunlei Pang <xpang@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: stable <stable@vger.kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
John Stultz authored
[ Upstream commit 27727df2 ] When I added some extra sanity checking in timekeeping_get_ns() under CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns() method was using timekeeping_get_ns(). Thus the locking added to the debug checks broke the NMI-safety of __ktime_get_fast_ns(). This patch open-codes the timekeeping_get_ns() logic for __ktime_get_fast_ns(), so can avoid any deadlocks in NMI. Fixes: 4ca22c26 "timekeeping: Add warnings when overflows or underflows are observed" Reported-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Andrey Ryabinin authored
[ Upstream commit dad22328 ] Commit e41f501d ("vmlinux.lds: account for destructor sections") added '.text.exit' to EXIT_TEXT which is discarded at link time by default. This breaks compilation of UML: `.text.exit' referenced in section `.fini_array' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o): defined in discarded section `.text.exit' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o) Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT sections in .exit.text. Fixes: e41f501d ("vmlinux.lds: account for destructor sections") Reported-by:
Stefan Traby <stefan@hello-penguin.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vincent Stehlé authored
[ Upstream commit c0082e98 ] An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a ("UBIFS: add new flash file system") Cc: <stable@vger.kernel.org> Signed-off-by:
Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit a77ec83a ] The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi command's response iovec throughout the lifetime of the command. Rather, it is more likely to contain an iovec from an immediately following command after looping back around to vhost_get_vq_desc(). Pass along the iovec entirely instead. Fixes: 79c14141 ("vhost/scsi: Convert completion path to use copy_to_iter") Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit fae16989 ] Commit fe6b0dfa ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfa ("Input: tegra-kbc - use reset framework") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Laxman Dewangan <ldewangan@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Andrej Krutak authored
[ Upstream commit b027d112 ] The commit 02fc76f6 changed base of the sysfs attributes from device to card. The "show" callbacks dereferenced wrong objects because of this. Fixes: 02fc76f6 ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
Andrej Krutak <dev@andree.sk> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andrej Krutak authored
[ Upstream commit adc8a43a ] Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df1 ('ALSA: line6: Reorganize PCM stream handling') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by:
-
Andrej Krutak authored
[ Upstream commit 7e4379ea ] If there's an error, pcm is released in line6_pcm_acquire already. Fixes: 247d95ee ('ALSA: line6: Handle error from line6_pcm_acquire()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by:
-
