ARM builds seem to be plagued by an occasional build error:

    Inconsistent kallsyms data
    This is a bug - please report about it
    Try "make KALLSYMS_EXTRA_PASS=1" as a workaround

The problem has to do with alignment of some sections by the linker.
The kallsyms data is built in two passes by first linking the kernel
without it, and then linking the kernel again with the symbols
included.  Normally, this just shifts the symbols, without changing
their order, and the compression used by the kallsyms gives the same
result.

On non SMP, the per CPU data is empty.  Depending on the where the
alignment ends up, it can come out as either:

   +-------------------+
   | last text segment |
   +-------------------+
   /* padding */
   +-------------------+     <- L1_CACHE_BYTES alignemnt
   | per cpu (empty)   |
   +-------------------+
__per_cpu_end:
   /* padding */
__data_loc:
   +-------------------+     <- THREAD_SIZE alignment
   | data              |
   +-------------------+

or

   +-------------------+
   | last text segment |
   +-------------------+
   /* padding */
   +-------------------+     <- L1_CACHE_BYTES alignemnt
   | per cpu (empty)   |
   +-------------------+
__per_cpu_end:
   /* no padding */
__data_loc:
   +-------------------+     <- THREAD_SIZE alignment
   | data              |
   +-------------------+

if the alignment satisfies both.  Because symbols that have the same
address are sorted by 'nm -n', the second case will be in a different
order than the first case.  This changes the compression, changing the
size of the kallsym data, causing the build failure.

The KALLSYMS_EXTRA_PASS=1 workaround usually works, but it is still
possible to have the alignment change between the second and third
pass.  It's probably even possible for it to never reach a fixedpoint.

The problem only occurs on non-SMP, when the per-cpu data is empty,
and when the data segment has alignment (and immediately follows the
text segments).  Fix this by only including the per_cpu section on
SMP, when it is not empty.
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are a number of small fixes for the drivers/staging tree, as well
  as iio and pstore drivers (which came from the staging tree in the
  3.5-rc1 merge).  All of these are tiny, but resolve issues that people
  have been reporting.

  There's also a documentation update to reflect what the iio drivers
  really are doing, which is good to get straightened out.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8712u: Add new USB IDs
  staging: gdm72xx: Release netlink socket properly
  iio: drop wrong reference from Kconfig
  pstore/inode: Make pstore_fill_super() static
  pstore/ram: Should zap persistent zone on unlink
  pstore/ram_core: Factor persistent_ram_zap() out of post_init()
  pstore/ram_core: Do not reset restored zone's position and size
  pstore/ram: Should update old dmesg buffer before reading
  staging:iio:ad7298: Fix linker error due to missing IIO kfifo buffer
  Revert "staging: usbip: bugfix for stack corruption on 64-bit architectures"
  staging: usbip: bugfix for stack corruption on 64-bit architectures
  staging/comedi: fix build for USB not enabled
  staging: omapdrm: fix crash when freeing bad fb
  staging:iio:ad7606: Re-add missing scale attribute
  iio: Fix potential use after free
  staging:iio: remove num_interrupt_lines from documentation
  iio: documentation: Add out_altvoltage and friends

Pull driver core and printk fixes from Greg Kroah-Hartman:
 "Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
  people have reported showing up after the printk and kmsg changes went
  into 3.5-rc1.  There are also a smattering of other tiny fixes for the
  extcon and hyper-v drivers that people have reported.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove()
  extcon: Set platform drvdata in gpio_extcon_probe() and fix irq leak
  extcon: Fix wrong index in max8997_extcon_cable[]
  kmsg - kmsg_dump() fix CONFIG_PRINTK=n compilation
  printk: return -EINVAL if the message len is bigger than the buf size
  printk: use mutex lock to stop syslog_seq from going wild
  kmsg - kmsg_dump() use iterator to receive log buffer content
  vme: change maintainer e-mail address
  Extcon: Don't try to create duplicate link names
  driver core: fixup reversed deferred probe order
  printk: Fix alignment of buf causing crash on ARM EABI
  Tools: hv: verify origin of netlink connector message

Pull misc tree updates from Greg Kroah-Hartman:
 "Here are some drivers/misc bugfixes (really just drivers/misc/mei/
  fixes) for a few problems that have been reported.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: mei: set WDIOF_ALARMONLY on mei watchdog
  misc: mei: Disable MSI when IRQ registration fails
  misc: mei: fix stalled read
  misc: mei: unregister misc device in pci_remove function
  misc: mei: set IRQF_ONESHOT for msi request_threaded_irq

Pull serial driver fixes from Greg Kroah-Hartman:
 "Here are 3 patches resolving a boot regression (the mop500 fix), a
  build warning fix, and a kernel-doc fix.  All tiny, but should go into
  the final 3.5 release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial/amba-pl011: move custom pin control to driver
  serial: fix serial_txx9.c build warning/typo
  serial: fix kernel-doc warnings in 8250.c

* emailed from Andrew Morton <akpm@linux-foundation.org>: (21 patches)
  mm/memblock: fix overlapping allocation when doubling reserved array
  c/r: prctl: Move PR_GET_TID_ADDRESS to a proper place
  pidns: find_new_reaper() can no longer switch to init_pid_ns.child_reaper
  pidns: guarantee that the pidns init will be the last pidns process reaped
  fault-inject: avoid call to random32() if fault injection is disabled
  Viresh has moved
  get_maintainer: Fix --help warning
  mm/memory.c: fix kernel-doc warnings
  mm: fix kernel-doc warnings
  mm: correctly synchronize rss-counters at exit/exec
  mm, thp: print useful information when mmap_sem is unlocked in zap_pmd_range
  h8300: use the declarations provided by <asm/sections.h>
  h8300: fix use of extinct _sbss and _ebss
  xtensa: use the declarations provided by <asm/sections.h>
  xtensa: use "test -e" instead of bashism "test -a"
  xtensa: replace xtensa-specific _f{data,text} by _s{data,text}
  memcg: fix use_hierarchy css_is_ancestor oops regression
  mm, oom: fix and cleanup oom score calculations
  nilfs2: ensure proper cache clearing for gc-inodes
  thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE
  ...

__alloc_memory_core_early() asks memblock for a range of memory then try
to reserve it.  If the reserved region array lacks space for the new
range, memblock_double_array() is called to allocate more space for the
array.  If memblock is used to allocate memory for the new array it can
end up using a range that overlaps with the range originally allocated in
__alloc_memory_core_early(), leading to possible data corruption.

With this patch memblock_double_array() now calls memblock_find_in_range()
with a narrowed candidate range (in cases where the reserved.regions array
is being doubled) so any memory allocated will not overlap with the
original range that was being reserved.  The range is narrowed by passing
in the starting address and size of the previously allocated range.  Then
the range above the ending address is searched and if a candidate is not
found, the range below the starting address is searched.
Signed-off-by: Greg Pearson <greg.pearson@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During merging of PR_GET_TID_ADDRESS patch the code has been misplaced (it
happened to appear under PR_MCE_KILL) in result noone can use this option.

Fix it by moving code snippet to a proper place.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

find_new_reaper() changes pid_ns->child_reaper, see add0d4df ("pid_ns:
zap_pid_ns_processes: fix the ->child_reaper changing").

The original reason has gone away after the previous patch, ->children
list must be empty after zap_pid_ns_processes().

However now we can not switch to init_pid_ns.child_reaper.
__unhash_process() relies on the "->child_reaper == parent" check, but
this check does not work if the last exiting task is also the child
reaper.

As Eric sugested, we can change __unhash_process() to use the parent's
pid_ns and remove this code.

Also, with this change we can move detach_pid(PIDTYPE_PID) back, where it
was before the previous fix.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Tested-by: Andrew Wagin <avagin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Today we have a twofold bug.  Sometimes release_task on pid == 1 in a pid
namespace can run before other processes in a pid namespace have had
release task called.  With the result that pid_ns_release_proc can be
called before the last proc_flus_task() is done using upid->ns->proc_mnt,
resulting in the use of a stale pointer.  This same set of circumstances
can lead to waitpid(...) returning for a processes started with
clone(CLONE_NEWPID) before the every process in the pid namespace has
actually exited.

To fix this modify zap_pid_ns_processess wait until all other processes in
the pid namespace have exited, even EXIT_DEAD zombies.

The delay_group_leader and related tests ensure that the thread gruop
leader will be the last thread of a process group to be reaped, or to
become EXIT_DEAD and self reap.  With the change to zap_pid_ns_processes
we get the guarantee that pid == 1 in a pid namespace will be the last
task that release_task is called on.

With pid == 1 being the last task to pass through release_task
pid_ns_release_proc can no longer be called too early nor can wait return
before all of the EXIT_DEAD tasks in a pid namespace have exited.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Tested-by: Andrew Wagin <avagin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After enabling CONFIG_FAILSLAB I noticed random32 in profiles even if slub
fault injection wasn't enabled at runtime.

should_fail forces a comparison against random32() even if probability is
0:

        if (attr->probability <= random32() % 100)
                return false;

Add a check up front for probability == 0 and avoid all of the more
complicated checks.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viresh.kumar@st.com email-id doesn't exist anymore as I have left the
company.  Replace ST's id with viresh.linux@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'
Signed-off-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Using --help emits a concatenation error.  Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc warnings in mm/memory.c:

  Warning(mm/memory.c:1377): No description found for parameter 'start'
  Warning(mm/memory.c:1377): Excess function parameter 'address' description in 'zap_page_range'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc warnings such as

  Warning(../mm/page_cgroup.c:432): No description found for parameter 'id'
  Warning(../mm/page_cgroup.c:432): Excess function parameter 'mem' description in 'swap_cgroup_record'
Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_exit() and exec_mmap() call sync_mm_rss() before mm_release() does
put_user(clear_child_tid) which can update task->rss_stat and thus make
mm->rss_stat inconsistent.  This triggers the "BUG:" printk in check_mm().

Let's fix this bug in the safest way, and optimize/cleanup this later.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Andrea asked for addr, end, vma->vm_start, and vma->vm_end to be emitted
when !rwsem_is_locked(&tlb->mm->mmap_sem).  Otherwise, debugging the
underlying issue is more difficult.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Cleanups:
  - Include <asm/sections.h>,
  - Remove the (different) extern declarations,
  - Remove the no longer needed address-of ('&') operators,
  - Remove the superfluous casts, use proper printk formatting instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Nowadays it should use __bss_start and __bss_stop
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Cleanups:
  - Include <asm/sections.h>,
  - Remove the (different) extern declarations,
  - Remove the no longer needed address-of ('&') operators,
  - Use %p to format pointer differences.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On Ubuntu, /bin/sh is a symlink to dash, which does not support "test -a".
This causes messages like

    test: 1: -a: unexpected operator
    test: 1: -a: unexpected operator

and link failures like

    (.init.text+0x132): undefined reference to `platform_init'

due to the appropriate platform code not being compiled.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit a2d063ac ("extable, core_kernel_data(): Make sure all archs
define _sdata") missed xtensa.  Xtensa does have a start of data marker,
but calls it _fdata, causing

    kernel/built-in.o:(.text+0x964): undefined reference to `_sdata'

_stext was already defined, but it was duplicated by _fdata.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If use_hierarchy is set, reclaim testing soon oopses in css_is_ancestor()
called from __mem_cgroup_same_or_subtree() called from page_referenced():
when processes are exiting, it's easy for mm_match_cgroup() to pass along
a NULL memcg coming from a NULL mm->owner.

Check for that in __mem_cgroup_same_or_subtree().  Return true or false?
False because we cannot know if it was in the hierarchy, but also false
because it's better not to count a reference from an exiting process.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The divide in p->signal->oom_score_adj * totalpages / 1000 within
oom_badness() was causing an overflow of the signed long data type.

This adds both the root bias and p->signal->oom_score_adj before doing the
normalization which fixes the issue and also cleans up the calculation.
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A gc-inode is a pseudo inode used to buffer the blocks to be moved by
garbage collection.

Block caches of gc-inodes must be cleared every time a garbage collection
function (nilfs_clean_segments) completes.  Otherwise, stale blocks
buffered in the caches may be wrongly reused in successive calls of the GC
function.

For user files, this is not a problem because their gc-inodes are
distinguished by a checkpoint number as well as an inode number.  They
never buffer different blocks if either an inode number, a checkpoint
number, or a block offset differs.

However, gc-inodes of sufile, cpfile and DAT file can store different data
for the same block offset.  Thus, the nilfs_clean_segments function can
move incorrect block for these meta-data files if an old block is cached.
I found this is really causing meta-data corruption in nilfs.

This fixes the issue by ensuring cache clear of gc-inodes and resolves
reported GC problems including checkpoint file corruption, b-tree
corruption, and the following warning during GC.

  nilfs_palloc_freev: entry number 307234 already freed.
  ...
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>	[2.6.37+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the
mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under
Xen.

So instead of dealing only with "consistent" pmdvals in
pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually
simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals
where the low 32bit and high 32bit could be inconsistent (to avoid having
to use cmpxchg8b).

The only guarantee we get from pmd_read_atomic is that if the low part of
the pmd was found null, the high part will be null too (so the pmd will be
considered unstable).  And if the low part of the pmd is found "stable"
later, then it means the whole pmd was read atomically (because after a
pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore,
and we read the high part after the low part).

In the 32bit PAE x86 case, it is enough to read the low part of the pmdval
atomically to declare the pmd as "stable" and that's true for THP and no
THP, furthermore in the THP case we also have a barrier() that will
prevent any inconsistent pmdvals to be cached by a later re-read of the
*pmd.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On arches that do not support this_cpu_cmpxchg_double() slab_lock is used
to do atomic cmpxchg() on double word which contains page->_count.  The
page count can be changed from get_page() or put_page() without taking
slab_lock.  That corrupts page counter.

Fix it by moving page->_count out of cmpxchg_double data.  So that slub
does no change it while updating slub meta-data in struct page.

[akpm@linux-foundation.org: use standard comment layout, tweak comment text]
Reported-by: Amey Bhide <abhide@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM fixes from Russell King:
 "This includes three MMCI changes - one to fix up the wrong version of
  the DT support patch which was merged, and two to make deferred
  probing work.  It also includes a fix to the OMAP SPI driver which is
  causing a boot time warning.

  The remainder are very minor ARM fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  SPI: fix over-eager devm_xxx() conversion
  ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOs
  ARM: 7426/1: mmc: mmci: Remove wrong error handling of gpio 0
  ARM: 7425/1: extable: ensure fixup entries are 4-byte aligned
  ARM: 7421/1: bpf_jit: BPF_S_ANC_ALU_XOR_X support
  ARM: 7423/1: kprobes: run t32_simulate_ldr_literal() without insn slot
  ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree boot

Pull two pinctrl fixes from Linus Walleij:
 - Fixed a 2-line compile error for MXS
 - A pure documentation fix for Nomadik

* tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/nomadik: document Alt-C glitch
  pinctrl: mxs: Use kfree to fix build error

Pull sound fixes from Takashi Iwai:
 "Most of changes are fairly small and driver-specific.

  A remaining regression fix for USB-audio sync pipe check, a fix for
  HD-audio power-up sequence, fixes for ASoC pxa-ssp compile issues, and
  bunch of ASoC codec and trivial fix patches."

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: 6fire: use NULL instead of 0 for pointer assignment
  ALSA: hda - Handle open while transitioning to D3.
  ALSA: snd-usb: make snd_usb_substream_capture_trigger static
  ALSA: snd-usb: fix sync pipe check
  ASoC: tegra+wm8903: turn of mic detect when card is removed
  ASoC: wm8996: Mark the CODEC as cache only when powering off on boot
  ASoC: wm8996: Move reset before the initial regulator disable
  ASoC: wm8996: Remove spurious regulator_bulk_free()
  ASoC: wm8904: Fix cache only management
  ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversion
  ASoC: fix pxa-ssp compiling issue under mach-mmp
  ARM: MMP: add pxa910-ssp into ssp_id_table

Pull regulator fixes from Mark Brown:
 "One small bug fix, plus a rename of all the ST Ericsson regulators in
  the device tree since all the device trees had been written with
  different names and some infelicities in the test proceedures meant
  that the device tree code had apparently never actually been run
  against the upstream device tree."

* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Change db8500-prcmu match names to reflect Device Tree
  regulator: Change ab8500 match names to reflect Device Tree
  regulator: Fix the s5m8767a problem of the division by null

extcon_dev_unregister(info->edev) doest not free info->edev, we need to call
kfree(info->edev) here.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing platform_set_drvdata() in gpio_extcon_probe(), otherwise calling
platform_get_drvdata in gpio_extcon_remove() returns NULL.

Also add missing free_irq call in gpio_extcon_remove().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, the index of "Dock-desk" and "Dock-card" are the same.
Thus the latter one overrides the first one.
Then we have problem when calling extcon_find_cable_index() because
edev->supported_cable[7] only matches "Dock-card".
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Kay Sievers <kay@vrfy.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull EDAC fixes from Mauro Carvalho Chehab.

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  edac: Do alignment logic properly in edac_align_ptr()
  mpc85xx_edac: fix error: too few arguments to function 'edac_mc_alloc'
  edac: fix the error about memory type detection on SandyBridge
  edac: avoid mce decoding crash after edac driver unloaded

Pull a 9p bugfix from Eric Van Hensbergen.

* 'v9fs-devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: BUG before corrupting memory

Pull a crypto fix from Herbert Xu:
 "This push fixes another bug in the atmel-rng that made it produce
  completely useless output."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: atmel-rng - fix data valid check

Pull MMC fixes from Chris Ball:
 - atmel-mci: Fixes for NULL timer and DMA burst/chunk size
 - dw_mmc: Fix DMA ordering, clkdiv calculation, NULL host->data
 - mxs_mmc: Compile fix for CONFIG_OF=y && CONFIG_PM=n
 - omap: Fix NULL deref in mmc_omap_remove_slot(), reg_shift initialization
 - sdhci-s3c: Fix boot regression by adding IRQF_ONESHOT flag
 - Small fixes to core/sd, core/sdio, sdhci

* tag 'mmc-fixes-for-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: mxs-mmc: Move of_match_table out of CONFIG_PM
  mmc: sdhci-s3c: pass IRQF ONESHOT to request threaded irq
  mmc: core: return an error on suspend if mmc_deselect_cards fails
  mmc: omap: Fix broken reg_shift initialization
  mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails
  mmc: omap: Fix a section warning regression
  mmc: dw_mmc: correct the calculation for CLKDIV
  mmc: dw_mmc: fix incorrect setting of host->data of NULL
  mmc: dw_mmc: fix the IDMAC sw reset
  mmc: dw_mmc: fix the transmission handling in IDMAC
  mmc: sdio: fix setting card data bus width as 4-bit
  mmc: atmel-mci: fix burst/chunk size modification
  mmc: atmel-mci: fix data timeout issue
  mmc: sdhci: Use DBG() instead of pr_warning() on large timeout

Pull remoteproc fixes from Ohad Ben-Cohen:
 "A few relatively-small remoteproc fixes for 3.5: two error path fixes,
  and one -Wformat warning fix."

* tag 'rproc-fixes-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc/omap: fix dev_err typo
  remoteproc: fix missing fault indication in error-path
  remoteproc: fix print format warnings