* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: label: remove #include of ACPI header to avoid warnings
  PCI: label: Fix compilation error when CONFIG_ACPI is unset
  PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.
  PCI: introduce reset_resource()
  PCI: data structure agnostic free list function
  PCI: refactor io size calculation code
  PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICH
  PCI hotplug: acpiphp: set current_state to D0 in register_slot
  PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs
  PCI: add more checking to ICH region quirks
  PCI: aer-inject: Override PCIe AER Mask Registers
  PCI: fix tlan build when CONFIG_PCI is not enabled
  PCI: remove quirk for pre-production systems
  PCI: Avoid potential NULL pointer dereference in pci_scan_bridge
  PCI/lpc: irq and pci_ids patch for Intel DH89xxCC DeviceIDs
  PCI: sysfs: Fix failure path for addition of "vpd" attribute

* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  spi/dw_spi: move dw_spi.h into drivers/spi
  spi/dw_spi: Fix missing header
  gpio/langwell: Clear edge bit before handling
  gpio/langwell: Simplify demux loop
  gpio/langwell: Convert irq name space
  gpio/langwell: Fix broken irq_eoi change.
  gpio; Make Intel chipset gpio drivers depend on x86
  gpio/cs5535-gpio: Fix section mismatch
  spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices
  spi/davinci: Support DMA transfers larger than 65535 words
  spi/davinci: Use correct length parameter to dma_map_single calls
  gpio: Use __devexit at necessary places
  gpio: add MODULE_DEVICE_TABLE to pch_gpio and ml_ioh_gpio
  gpio/mcp23s08: support mcp23s17 variant
  of_mmc_spi: add card detect irq support
  spi/omap_mcspi: catch xfers of non-multiple SPI word size
  spi/omap_mcspi: Off-by-one error in finding the right divisor
  gpio/pca953x: Fix wrong pointer type
  spi/pl022: rid dangling labels
  spi: add support for SuperH SPI
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use alloc_workqueue function
  dlm: increase default hash table sizes
  dlm: record full callback state

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs: call security_d_instantiate in d_obtain_alias V2
  lose 'mounting_here' argument in ->d_manage()
  don't pass 'mounting_here' flag to follow_down()
  change the locking order for namespace_sem
  fix deadlock in pivot_root()
  vfs: split off vfsmount-related parts of vfs_kern_mount()
  Some fixes for pstore
  kill simple_set_mnt()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs:
  omfs: make readdir stop when filldir says so
  omfs: merge unlink() and rmdir(), close leak in rename()
  omfs: stop playing silly buggers with omfs_unlink() in ->rename()
  omfs: rename() needs to mark old_inode dirty after ctime update

* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits)
  UBIFS: clean-up commentaries
  UBIFS: save 128KiB or more RAM
  UBIFS: allocate orphans scan buffer on demand
  UBIFS: allocate lpt dump buffer on demand
  UBIFS: allocate ltab checking buffer on demand
  UBIFS: allocate scanning buffer on demand
  UBIFS: allocate dump buffer on demand
  UBIFS: do not check data crc by default
  UBIFS: simplify UBIFS Kconfig menu
  UBIFS: print max. index node size
  UBIFS: handle allocation failures in UBIFS write path
  UBIFS: use max_write_size during recovery
  UBIFS: use max_write_size for write-buffers
  UBIFS: introduce write-buffer size field
  UBI: incorporate LEB offset information
  UBIFS: incorporate maximum write size
  UBI: provide LEB offset information
  UBI: incorporate maximum write size
  UBIFS: fix LEB number in printk
  UBIFS: restrict world-writable debugfs files
  ...

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: make tests modes dynamic
  UBI: make self-checks dynamic
  UBI: make debugging messages dynamic
  UBI: remove UBI_IO_DEBUG macro
  UBI: kill debugging buffer
  UBI: allocate erase checking buffer on demand
  UBI: allocate write checking buffer on demand
  UBI: always re-read in case of read failures
  UBI: cleanup comments about corrupted PEBs
  UBI: add slab cache for ubi_scan_leb objects
  UBI: use raw mtd read function in debugging code
  UBI: try to reveal buggy MTD drivers
  UBI: add a commentary about allocating VID header buffer on stack
  UBI: cleanup LEB start calculations
  UBI: fix NOR erase preparation quirk

Add an entry for serial maintainers.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (308 commits)
  ALSA: sound/pci/asihpi: check adapter index in hpi_ioctl
  ALSA: aloop - Fix possible IRQ lock inversion
  ALSA: sound/core: merge list_del()/list_add_tail() to list_move_tail()
  ALSA: ctxfi - use list_move() instead of list_del()/list_add() combination
  ALSA: firewire - msleep needs delay.h
  ALSA: firewire-lib, firewire-speakers: handle packet queueing errors
  ALSA: firewire-lib: allocate DMA buffer separately
  ALSA: firewire-lib: use no-info SYT for packets without SYT sample
  ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver
  ALSA: hda - Remove an unused variable in patch_realtek.c
  ALSA: hda - pin-adc-mux-dmic auto-configuration of 92HD8X codecs
  ALSA: hda - fix digital mic selection in mixer on 92HD8X codecs
  ALSA: hda - Move default input-src selection to init part
  ALSA: hda - Initialize special cases for input src in init phase
  ALSA: ctxfi - Clear input settings before initialization
  ALSA: ctxfi - Fix SPDIF status retrieval
  ALSA: ctxfi - Fix incorrect SPDIF status bit mask
  ALSA: ctxfi - Fix microphone boost codes/comments
  ALSA: atiixp - Fix wrong time-out checks during ac-link reset
  ALSA: intel8x0m: append 'm' to "r_intel8x0"
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Flush TLB if PGD entry is changed in i386 PAE mode
  x86, dumpstack: Correct stack dump info when frame pointer is available
  x86: Clean up csum-copy_64.S a bit
  x86: Fix common misspellings
  x86: Fix misspelling and align params
  x86: Use PentiumPro-optimized partial_csum() on VIA C7

Merge branches 'irq-fixes-for-linus' and 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix incorrect unlock in __setup_irq()
  cris: Use generic show_interrupts()
  genirq: show_interrupts: Check desc->name before printing it blindly
  cris: Use accessor functions to set IRQ_PER_CPU flag
  cris: Fix irq conversion fallout

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, kernel-doc: Fix runqueue_is_locked() description

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  trace, filters: Initialize the match variable in process_ops() properly
  trace, documentation: Fix branch profiling location in debugfs
  oprofile, s390: Cleanups
  oprofile, s390: Remove hwsampler_files.c and merge it into init.c
  perf: Fix tear-down of inherited group events
  perf: Reorder & optimize perf_event_context to remove alignment padding on 64 bit builds
  perf: Handle stopped state with tracepoints
  perf: Fix the software events state check
  perf, powerpc: Handle events that raise an exception without overflowing
  perf, x86: Use INTEL_*_CONSTRAINT() for all PEBS event constraints
  perf, x86: Clean up SandyBridge PEBS events
  perf lock: Fix sorting by wait_min
  perf tools: Version incorrect with some versions of grep
  perf evlist: New command to list the names of events present in a perf.data file
  perf script: Add support for H/W and S/W events
  perf script: Add support for dumping symbols
  perf script: Support custom field selection for output
  perf script: Move printing of 'common' data from print_event and rename
  perf tracing: Remove print_graph_cpu and print_graph_proc from trace-event-parse
  perf script: Change process_event prototype
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
  HID: add support for Logitech Driving Force Pro wheel
  HID: hid-ortek: remove spurious reference
  HID: add support for Ortek PKB-1700
  HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
  HID: hid-ntrig: init settle and mode check
  HID: merge hid-egalax into hid-multitouch
  HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
  HID: ntrig remove if and drop an indent
  HID: ACRUX - activate the device immediately after binding
  HID: ntrig: apply NO_INIT_REPORTS quirk
  HID: hid-magicmouse: Correct touch orientation direction
  HID: ntrig don't dereference unclaimed hidinput
  HID: Do not create input devices for feature reports
  HID: bt hidp: send Output reports using SET_REPORT on the Control channel
  HID: hid-sony.c: Fix sending Output reports to the Sixaxis
  HID: add support for Keytouch IEC 60945
  HID: Add HID Report Descriptor to sysfs
  HID: add IRTOUCH infrared USB to hid_have_special_driver
  HID: kernel oops in out_cleanup in function hidinput_connect
  HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
  ...

include/linux/dw_spi.h only includes driver internal data.  It doesn't
expose a platform_data configuration structure or similar (at least
nothing in-tree).  This patch moves the header into drivers/spi so
that the scope is limited to only the dw_spi_*.c driver files
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Feng Tang <feng.tang@intel.com>
Cc: spi-devel-general@lists.sourceforge.net

Currently, build on PPC dies with:
In file included from drivers/spi/dw_spi_mmio.c:16:
include/linux/spi/dw_spi.h:147: error: field ‘tx_sgl’ has incomplete type
include/linux/spi/dw_spi.h:149: error: field ‘rx_sgl’ has incomplete type

Add linux/scatterlist.h include to dw_spi.h, because we need to know
the contents of the structure.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

While trying to track down some NFS problems with BTRFS, I kept noticing I was
getting -EACCESS for no apparent reason.  Eric Paris and printk() helped me
figure out that it was SELinux that was giving me grief, with the following
denial

type=AVC msg=audit(1290013638.413:95): avc:  denied  { 0x800000 } for  pid=1772
comm="nfsd" name="" dev=sda1 ino=256 scontext=system_u:system_r:kernel_t:s0
tcontext=system_u:object_r:unlabeled_t:s0 tclass=file

Turns out this is because in d_obtain_alias if we can't find an alias we create
one and do all the normal instantiation stuff, but we don't do the
security_d_instantiate.

Usually we are protected from getting a hashed dentry that hasn't yet run
security_d_instantiate() by the parent's i_mutex, but obviously this isn't an
option there, so in order to deal with the case that a second thread comes in
and finds our new dentry before we get to run security_d_instantiate(), we go
ahead and call it if we find a dentry already.  Eric assures me that this is ok
as the code checks to see if the dentry has been initialized already so calling
security_d_instantiate() against the same dentry multiple times is ok.  With
this patch I'm no longer getting errant -EACCESS values.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

it's always false...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Make sure the 'match' variable always has a value.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits)
  powerpc/85xx: Fix signedness bug in cache-sram
  powerpc/fsl: 85xx: document cache sram bindings
  powerpc/fsl: define binding for fsl mpic interrupt controllers
  powerpc/fsl_msi: Handle msi-available-ranges better
  drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
  powerpc/85xx: Fix SPE float to integer conversion failure
  powerpc/85xx: Update sata controller compatible for p1022ds board
  ATA: Add FSL sata v2 controller support
  powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable
  powerpc/8xx: remove obsolete mgsuvd board
  powerpc/82xx: rename and update mgcoge board support
  powerpc/83xx: rename and update kmeter1
  powerpc/85xx: Workaroudn e500 CPU erratum A005
  powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x
  powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e
  powerpc/pseries: Disable MSI using new interface if possible
  powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.
  powerpc: core irq_data conversion.
  powerpc: sysdev/xilinx_intc irq_data conversion.
  powerpc: sysdev/uic irq_data conversion.
  ...

Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of
of_platform_driver in arch/powerpc)

it's always false now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Have it nested inside ->i_mutex.  Instead of using follow_down()
under namespace_sem, followed by grabbing i_mutex and checking that
mountpoint to be is not dead, do the following:
	grab i_mutex
	check that it's not dead
	grab namespace_sem
	see if anything is mounted there
	if not, we've won
	otherwise
		drop locks
		put_path on what we had
		replace with what's mounted
		retry everything with new mountpoint to be

New helper (lock_mount()) does that.  do_add_mount(), do_move_mount(),
do_loopback() and pivot_root() switched to it; in case of the last
two that eliminates a race we used to have - original code didn't
do follow_down().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Don't hold vfsmount_lock over the loop traversing ->mnt_parent;
do check_mnt(new.mnt) under namespace_sem instead; combined with
namespace_sem held over all that code it'll guarantee the stability
of ->mnt_parent chain all the way to the root.

Doing check_mnt() outside of namespace_sem in case of pivot_root()
is wrong anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

According to intel CPU manual, every time PGD entry is changed in i386 PAE
mode, we need do a full TLB flush. Current code follows this and there is
comment for this too in the code.

But current code misses the multi-threaded case. A changed page table
might be used by several CPUs, every such CPU should flush TLB. Usually
this isn't a problem, because we prepopulate all PGD entries at process
fork. But when the process does munmap and follows new mmap, this issue
will be triggered.

When it happens, some CPUs keep doing page faults:

  http://marc.info/?l=linux-kernel&m=129915020508238&w=2

Reported-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Tested-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Mallick Asit K <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm <linux-mm@kvack.org>
Cc: stable <stable@kernel.org>
LKML-Reference: <1300246649.2337.95.camel@sli10-conroe>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Current stack dump code scans entire stack and check each entry
contains a pointer to kernel code. If CONFIG_FRAME_POINTER=y it
could mark whether the pointer is valid or not based on value of
the frame pointer. Invalid entries could be preceded by '?' sign.

However this was not going to happen because scan start point
was always higher than the frame pointer so that they could not
meet.

Commit 9c0729dc ("x86: Eliminate bp argument from the stack
tracing routines") delayed bp acquisition point, so the bp was
read in lower frame, thus all of the entries were marked
invalid.

This patch fixes this by reverting above commit while retaining
stack_frame() helper as suggested by Frederic Weisbecker.

End result looks like below:

before:

 [    3.508329] Call Trace:
 [    3.508551]  [<ffffffff814f35c9>] ? panic+0x91/0x199
 [    3.508662]  [<ffffffff814f3739>] ? printk+0x68/0x6a
 [    3.508770]  [<ffffffff81a981b2>] ? mount_block_root+0x257/0x26e
 [    3.508876]  [<ffffffff81a9821f>] ? mount_root+0x56/0x5a
 [    3.508975]  [<ffffffff81a98393>] ? prepare_namespace+0x170/0x1a9
 [    3.509216]  [<ffffffff81a9772b>] ? kernel_init+0x1d2/0x1e2
 [    3.509335]  [<ffffffff81003894>] ? kernel_thread_helper+0x4/0x10
 [    3.509442]  [<ffffffff814f6880>] ? restore_args+0x0/0x30
 [    3.509542]  [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2
 [    3.509641]  [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10

after:

 [    3.522991] Call Trace:
 [    3.523351]  [<ffffffff814f35b9>] panic+0x91/0x199
 [    3.523468]  [<ffffffff814f3729>] ? printk+0x68/0x6a
 [    3.523576]  [<ffffffff81a981b2>] mount_block_root+0x257/0x26e
 [    3.523681]  [<ffffffff81a9821f>] mount_root+0x56/0x5a
 [    3.523780]  [<ffffffff81a98393>] prepare_namespace+0x170/0x1a9
 [    3.523885]  [<ffffffff81a9772b>] kernel_init+0x1d2/0x1e2
 [    3.523987]  [<ffffffff81003894>] kernel_thread_helper+0x4/0x10
 [    3.524228]  [<ffffffff814f6880>] ? restore_args+0x0/0x30
 [    3.524345]  [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2
 [    3.524445]  [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10

 -v5:
   * fix build breakage with oprofile

 -v4:
   * use 0 instead of regs->bp
   * separate out printk changes

 -v3:
   * apply comment from Frederic
   * add a couple of printk fixes
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Soren Sandmann <ssp@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1300416006-3163-1-git-send-email-namhyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The many stray whitespaces and other uncleanlinesses made this code
almost unreadable to me - so fix those.

No changes to the code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

They were generated by 'codespell' and then manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Fix 'upto' misspelling and align parameters.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-2-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Merge upstream commits to avoid conflicts in upcoming patches.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The user-supplied index into the adapters array needs to be checked, or
an out-of-bounds kernel pointer could be accessed and used, leading to
potentially exploitable memory corruption.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

loopback_pos_update() can be called in the timer callback, thus the lock
held should be irq-safe.  Otherwise you'll get AB/BA deadlock together
with substream->self_group.lock.
Reported-and-tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

I don't have the specs for this beast, but it looks a lot like the PXA
GPIO block. Though I bet it's the same IP and the driver should have
reused the PXA code.

Acknowleding the edge detect status after handling one or more gpio
interrupts looks wrong. We might lose an edge which came in while we
handled the previous one.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alek Du <alek.du@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (27 commits)
  arch/tile: support newer binutils assembler shift semantics
  arch/tile: fix deadlock bugs in rwlock implementation
  drivers/edac: provide support for tile architecture
  tile on-chip network driver: sync up with latest fixes
  arch/tile: support 4KB page size as well as 64KB
  arch/tile: add some more VMSPLIT options and use consistent naming
  arch/tile: fix some comments and whitespace
  arch/tile: export some additional module symbols
  arch/tile: enhance existing finv_buffer_remote() routine
  arch/tile: fix two bugs in the backtracer code
  arch/tile: use extended assembly to inline __mb_incoherent()
  arch/tile: use a cleaner technique to enable interrupt for cpu_idle()
  arch/tile: sync up with <arch/sim.h> and <arch/sim_def.h> changes
  arch/tile: fix reversed test of strict_strtol() return value
  arch/tile: avoid a simulator warning during bootup
  arch/tile: export <asm/hardwall.h> to userspace
  arch/tile: warn and retry if an IPI is not accepted by the target cpu
  arch/tile: stop disabling INTCTRL_1 interrupts during hypervisor downcalls
  arch/tile: fix __ndelay etc to work better
  arch/tile: bug fix: exec'ed task thought it was still single-stepping
  ...

Fix up trivial conflict in arch/tile/kernel/vmlinux.lds.S (percpu
alignment vs section naming convention fix)

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (46 commits)
  msm: scm: Check for interruption immediately
  msm: scm: Fix improper register assignment
  msm: scm: Mark inline asm as volatile
  msm: iommu: Enable HTW L2 redirection on MSM8960
  msm: iommu: Don't read from write-only registers
  msm: iommu: Remove dependency on IDR
  msm: iommu: Use ASID tagging instead of VMID tagging
  msm: iommu: Rework clock logic and add IOMMU bus clock control
  msm: iommu: Clock control for the IOMMU driver
  msm: mdp: Set the correct pack pattern for XRGB/ARGB
  msm_fb: Fix framebuffer console
  msm: mdp: Add support for RGBX 8888 image format.
  video: msmfb: Put the partial update magic value into the fix_screen struct.
  msm: clock: Migrate to clkdev
  msm: clock: Remove references to clk_ops_pcom
  msm: headsmp.S: Fix section mismatch
  msm: Use explicit GPLv2 licenses
  msm: iommu: Enable IOMMU support for MSM8960
  msm: iommu: Generalize platform data for multiple targets
  msm: iommu: Create a Kconfig item for the IOMMU driver
  ...

new function: mount_fs().  Does all work done by vfs_kern_mount()
except the allocation and filling of vfsmount; returns root dentry
or ERR_PTR().

vfs_kern_mount() switched to using it and taken to fs/namespace.c,
along with its wrappers.

alloc_vfsmnt()/free_vfsmnt() made static.

functions in namespace.c slightly reordered.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

1) Change from ->get_sb() to ->mount()
2) Use mount_single() instead of mount_nodev()
3) Pulled in ramfs_get_inode() & trimmed to what I need for pstore
4) Drop the ugly pstore_writefile() Just save data using kmalloc() and
   provide a pstore_file_read() that uses simple_read_from_buffer().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig

* 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6647/1: add Versatile Express defconfig
  ARM: 6644/1: mach-ux500: update the U8500 defconfig

* 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6764/1: pl011: factor out FIFO to TTY code
  ARM: 6763/1: pl011: add optional RX DMA to PL011 v2
  ARM: 6758/1: amba: support pm ops
  ARM: amba: make amba_driver id_table const
  ARM: amba: make internal ID table handling const
  ARM: amba: make probe() functions take const id tables
  ARM: 6662/1: amba: make amba_bustype non-static
  ARM: mmci: add dmaengine-based DMA support
  ARM: mmci: no need for separate host->data_xfered
  ARM: mmci: avoid unnecessary switch to data available PIO interrupts
  ARM: mmci: no need to call flush_dcache_page() with sg_miter API
  ARM: mmci: avoid reporting too many completed bytes on fifo overrun
  ALSA: AACI: make fifo variables more explanitory
  ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period
  ALSA: AACI: use snd_pcm_lib_period_bytes()
  ALSA: AACI: clean up AACI announcement printk
  ALSA: AACI: fix channel mask selection
  ALSA: AACI: fix number of channels for record
  ALSA: AACI: fix multiple IRQ claiming

* 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var()
  VIDEO: cyberpro: remove useless function extreg pointers
  VIDEO: cyberpro: update handling of device structures
  VIDEO: cyberpro: add support for video capture I2C
  VIDEO: cyberpro: make 'reg_b0_lock' always present
  VIDEO: cyberpro: add I2C support
  VIDEO: cyberpro: select lowest multipler/divisor for PLL