- 02 Feb, 2016 40 commits
-
-
Jean Delvare authored
commit fd7f6727 upstream. I don't think it makes sense for a module to have a soft dependency on itself. This seems quite cyclic by nature and I can't see what purpose it could serve. OTOH libcrc32c calls crypto_alloc_shash("crc32c", 0, 0) so it pretty much assumes that some incarnation of the "crc32c" hash algorithm has been loaded. Therefore it makes sense to have the soft dependency there (as crc-t10dif does.) Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Herbert Xu authored
commit 4f0414e5 upstream. We need to load the TX SG list in sendmsg(2) after waiting for incoming data, not before. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Takashi Iwai authored
commit c0bcdbdf upstream. When a TLV ioctl with numid zero is handled, the driver may spew a kernel warning with a stack trace at each call. The check was intended obviously only for a kernel driver, but not for a user interaction. Let's fix it. This was spotted by syzkaller fuzzer. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nicolas Boichat authored
commit 9586495d upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_seq_port_info32 to a struct snd_seq_port_info, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
Nicolas Boichat authored
commit 43c54b8c upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_pcm_hw_params32 to a struct snd_pcm_hw_params, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. This actually leads to an out-of-bounds memory access later on in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan). Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
-
Takashi Iwai authored
commit 2ba1fe7a upstream. hrtimer_cancel() waits for the completion from the callback, thus it must not be called inside the callback itself. This was already a problem in the past with ALSA hrtimer driver, and the early commit [fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it. However, the previous fix is still insufficient: it may still cause a lockup when the ALSA timer instance reprograms itself in its callback. Then it invokes the start function even in snd_timer_interrupt() that is called in hrtimer callback itself, results in a CPU stall. This is no hypothetical problem but actually triggered by syzkaller fuzzer. This patch tries to fix the issue again. Now we call hrtimer_try_to_cancel() at both start and stop functions so that it won't fall into a deadlock, yet giving some chance to cancel the queue if the functions have been called outside the callback. The proper hrtimer_cancel() is called in anyway at closing, so this should be enough. Reported-and-tested-by:
-
Herbert Xu authored
commit a6a48c56 upstream. This patch forbids the calling of bind(2) when there are child sockets created by accept(2) in existence, even if they are created on the nokey path. This is needed as those child sockets have references to the tfm object which bind(2) will destroy. Signed-off-by:
-
Herbert Xu authored
commit 6a935170 upstream. This patch allows af_alg_release_parent to be called even for nokey sockets. Signed-off-by:
-
Herbert Xu authored
commit a5596d63 upstream. This patch adds a way for ahash users to determine whether a key is required by a crypto_ahash transform. Signed-off-by:
-
Herbert Xu authored
commit 37766586 upstream. This patch adds a compatibility path to support old applications that do acept(2) before setkey. Signed-off-by:
-
Herbert Xu authored
commit a383292c upstream. When we fail an accept(2) call we will end up freeing the socket twice, once due to the direct sk_free call and once again through newsock. This patch fixes this by removing the sk_free call. Reported-by:
-
Herbert Xu authored
commit c840ac6a upstream. Each af_alg parent socket obtained by socket(2) corresponds to a tfm object once bind(2) has succeeded. An accept(2) call on that parent socket creates a context which then uses the tfm object. Therefore as long as any child sockets created by accept(2) exist the parent socket must not be modified or freed. This patch guarantees this by using locks and a reference count on the parent socket. Any attempt to modify the parent socket will fail with EBUSY. Reported-by:
-
Takashi Iwai authored
commit db8948e6 upstream. ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass speaker output pin as other N550 models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001Signed-off-by:
-
Tejun Heo authored
commit 8d91f8b1 upstream. @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 7625b3a0 upstream. Commit 08d78658 ("panic: release stale console lock to always get the logbuf printed out") introduced an unwanted bad unlock balance report when panic() is called directly and not from OOPS (e.g. from out_of_memory()). The difference is that in case of OOPS we disable locks debug in oops_enter() and on direct panic call nobody does that. Fixes: 08d78658 ("panic: release stale console lock to always get the logbuf printed out") Reported-by:
kernel test robot <ying.huang@linux.intel.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 08d78658 upstream. In some cases we may end up killing the CPU holding the console lock while still having valuable data in logbuf. E.g. I'm observing the following: - A crash is happening on one CPU and console_unlock() is being called on some other. - console_unlock() tries to print out the buffer before releasing the lock and on slow console it takes time. - in the meanwhile crashing CPU does lots of printk()-s with valuable data (which go to the logbuf) and sends IPIs to all other CPUs. - console_unlock() finishes printing previous chunk and enables interrupts before trying to print out the rest, the CPU catches the IPI and never releases console lock. This is not the only possible case: in VT/fb subsystems we have many other console_lock()/console_unlock() users. Non-masked interrupts (or receiving NMI in case of extreme slowness) will have the same result. Getting the whole console buffer printed out on crash should be top priority. [akpm@linux-foundation.org: tweak comment text] Signed-off-by:
-
Martijn Coenen authored
commit 6611d8d7 upstream. A spare array holding mem cgroup threshold events is kept around to make sure we can always safely deregister an event and have an array to store the new set of events in. In the scenario where we're going from 1 to 0 registered events, the pointer to the primary array containing 1 event is copied to the spare slot, and then the spare slot is freed because no events are left. However, it is freed before calling synchronize_rcu(), which means readers may still be accessing threshold->primary after it is freed. Fixed by only freeing after synchronize_rcu(). Signed-off-by:
Martijn Coenen <maco@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
-
Naoya Horiguchi authored
commit d96b339f upstream. I saw the following BUG_ON triggered in a testcase where a process calls madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that calls migratepages command repeatedly (doing ping-pong among different NUMA nodes) for the first process: Soft offlining page 0x60000 at 0x700000600000 __get_any_page: 0x60000 free buddy page page:ffffea0001800000 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x1fffc0000000000() page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/include/linux/mm.h:342! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G O 4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000 RIP: 0010:[<ffffffff8118998c>] [<ffffffff8118998c>] put_page+0x5c/0x60 RSP: 0018:ffff88007c213e00 EFLAGS: 00010246 Call Trace: put_hwpoison_page+0x4e/0x80 soft_offline_page+0x501/0x520 SyS_madvise+0x6bc/0x6f0 entry_SYSCALL_64_fastpath+0x12/0x6a Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47 RIP [<ffffffff8118998c>] put_page+0x5c/0x60 RSP <ffff88007c213e00> The root cause resides in get_any_page() which retries to get a refcount of the page to be soft-offlined. This function calls put_hwpoison_page(), expecting that the target page is putback to LRU list. But it can be also freed to buddy. So the second check need to care about such case. Fixes: af8fae7c ("mm/memory-failure.c: clean up soft_offline_page()") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Kyeongdon Kim authored
commit d913897a upstream. When we're using LZ4 multi compression streams for zram swap, we found out page allocation failure message in system running test. That was not only once, but a few(2 - 5 times per test). Also, some failure cases were continually occurring to try allocation order 3. In order to make parallel compression private data, we should call kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order 2/3 size memory to allocate in that time, page allocation fails. This patch makes to use vmalloc() as fallback of kmalloc(), this prevents page alloc failure warning. After using this, we never found warning message in running test, also It could reduce process startup latency about 60-120ms in each case. For reference a call trace : Binder_1: page allocation failure: order:3, mode:0x10c0d0 CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20 Call trace: dump_backtrace+0x0/0x270 show_stack+0x10/0x1c dump_stack+0x1c/0x28 warn_alloc_failed+0xfc/0x11c __alloc_pages_nodemask+0x724/0x7f0 __get_free_pages+0x14/0x5c kmalloc_order_trace+0x38/0xd8 zcomp_lz4_create+0x2c/0x38 zcomp_strm_alloc+0x34/0x78 zcomp_strm_multi_find+0x124/0x1ec zcomp_strm_find+0xc/0x18 zram_bvec_rw+0x2fc/0x780 zram_make_request+0x25c/0x2d4 generic_make_request+0x80/0xbc submit_bio+0xa4/0x15c __swap_writepage+0x218/0x230 swap_writepage+0x3c/0x4c shrink_page_list+0x51c/0x8d0 shrink_inactive_list+0x3f8/0x60c shrink_lruvec+0x33c/0x4cc shrink_zone+0x3c/0x100 try_to_free_pages+0x2b8/0x54c __alloc_pages_nodemask+0x514/0x7f0 __get_free_pages+0x14/0x5c proc_info_read+0x50/0xe4 vfs_read+0xa0/0x12c SyS_read+0x44/0x74 DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB [minchan@kernel.org: change vmalloc gfp and adding comment about gfp] [sergey.senozhatsky@gmail.com: tweak comments and styles] Signed-off-by:
Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by:
-
Sergey Senozhatsky authored
commit 3d5fe03a upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by:
-
Takashi Iwai authored
commit b5a663aa upstream. A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by:
-
xuejiufei authored
commit bef5502d upstream. We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by:
Jiufei Xue <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Sergey Senozhatsky authored
commit 72214a24 upstream. In Python3+ print is a function so the old syntax is not correct anymore: $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old File "./scripts/bloat-o-meter", line 61 print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \ ^ SyntaxError: invalid syntax Fix by calling print as a function. Tested on python 2.7.11, 3.5.1 Signed-off-by:
-
Laura Abbott authored
commit ea535e41 upstream. In include/asm-generic/sections.h: /* * Usage guidelines: * _text, _data: architecture specific, don't use them in * arch-independent code * [_stext, _etext]: contains .text.* sections, may also contain * .rodata.* * and/or .init.* sections _text is not guaranteed across architectures. Architectures such as ARM may reuse parts which are not actually text and erroneously trigger a bug. Switch to using _stext which is guaranteed to contain text sections. Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sudip Mukherjee authored
commit 601f1db6 upstream. The build of m32104ut_defconfig for m32r arch was failing for long long time with the error: ERROR: "memory_start" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [drivers/scsi/sg.ko] undefined! ERROR: "memory_start" [drivers/scsi/sg.ko] undefined! ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined! ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined! As done in other architectures export the symbols to fix the error. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Vasily Averin authored
commit 01b9b0b2 upstream. In some cases tmp_bug can be not filled in cifs_filldir and stay uninitialized, therefore its printk with "%s" modifier can leak content of kernelspace memory. If old content of this buffer does not contain '\0' access bejond end of allocated object can crash the host. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Steve French <sfrench@localhost.localdomain> Signed-off-by:
-
Rabin Vincent authored
commit 820962dc upstream. cifs_call_async() queues the MID to the pending list and calls smb_send_rqst(). If smb_send_rqst() performs a partial send, it sets the tcpStatus to CifsNeedReconnect and returns an error code to cifs_call_async(). In this case, cifs_call_async() removes the MID from the list and returns to the caller. However, cifs_call_async() releases the server mutex _before_ removing the MID. This means that a cifs_reconnect() can race with this function and manage to remove the MID from the list and delete the entry before cifs_call_async() calls cifs_delete_mid(). This leads to various crashes due to the use after free in cifs_delete_mid(). Task1 Task2 cifs_call_async(): - rc = -EAGAIN - mutex_unlock(srv_mutex) cifs_reconnect(): - mutex_lock(srv_mutex) - mutex_unlock(srv_mutex) - list_delete(mid) - mid->callback() cifs_writev_callback(): - mutex_lock(srv_mutex) - delete(mid) - mutex_unlock(srv_mutex) - cifs_delete_mid(mid) <---- use after free Fix this by removing the MID in cifs_call_async() before releasing the srv_mutex. Also hold the srv_mutex in cifs_reconnect() until the MIDs are moved out of the pending list. Signed-off-by:
Rabin Vincent <rabin.vincent@axis.com> Acked-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
-
Dmitry V. Levin authored
commit 525fd5a9 upstream. The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by:
-
Linus Walleij authored
commit 0bcb7efd upstream. commit 4956e109 ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Fixes: 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Mans Rullgard authored
commit 2895b2ca upstream. Cyclic transfer callbacks rely on block completion interrupts which were disabled in commit ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts"). This re-enables block interrupts so the cyclic callbacks can work. Other transfer types are not affected as they set the INT_EN bit only on the last block. Fixes: ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts") Signed-off-by:
Mans Rullgard <mans@mansr.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mans Rullgard authored
commit df3bb8a0 upstream. Commit 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") moved some channel initialisation to a new function which must be called before starting a transfer. This updates dw_dma_cyclic_start() to use dwc_dostart() like the other modes, thus ensuring dwc_initialize() gets called and removing some code duplication. Fixes: 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") Signed-off-by:
-
Takashi Iwai authored
commit ee8413b0 upstream. ALSA timer instance object has a couple of linked lists and they are unlinked unconditionally at snd_timer_stop(). Meanwhile snd_timer_interrupt() unlinks it, but it calls list_del() which leaves the element list itself unchanged. This ends up with unlinking twice, and it was caught by syzkaller fuzzer. The fix is to use list_del_init() variant properly there, too. Reported-by:
-
Andy Lutomirski authored
commit 4eaffdd5 upstream. My previous comments were still a bit confusing and there was a typo. Fix it up. Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 71b3c126 ("x86/mm: Add barriers and document switch_mm()-vs-flush synchronization") Link: http://lkml.kernel.org/r/0a0b43cdcdd241c5faaaecfbcc91a155ddedc9a1.1452631609.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ulrich Weigand authored
commit a61674bd upstream. GCC 6 will include changes to generated code with -mcmodel=large, which is used to build kernel modules on powerpc64le. This was necessary because the large model is supposed to allow arbitrary sizes and locations of the code and data sections, but the ELFv2 global entry point prolog still made the unconditional assumption that the TOC associated with any particular function can be found within 2 GB of the function entry point: func: addis r2,r12,(.TOC.-func)@ha addi r2,r2,(.TOC.-func)@l .localentry func, .-func To remove this assumption, GCC will now generate instead this global entry point prolog sequence when using -mcmodel=large: .quad .TOC.-func func: .reloc ., R_PPC64_ENTRY ld r2, -8(r12) add r2, r2, r12 .localentry func, .-func The new .reloc triggers an optimization in the linker that will replace this new prolog with the original code (see above) if the linker determines that the distance between .TOC. and func is in range after all. Since this new relocation is now present in module object files, the kernel module loader is required to handle them too. This patch adds support for the new relocation and implements the same optimization done by the GNU linker. Signed-off-by:
Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ulrich Weigand authored
commit 2e50c4be upstream. If a text section starts out with a data blob before the first function start label, disassembly parsing doing in recordmcount.pl gets confused on powerpc, leading to creation of corrupted module objects. This was not a problem so far since the compiler would never create such text sections. However, this has changed with a recent change in GCC 6 to support distances of > 2GB between a function and its assoicated TOC in the ELFv2 ABI, exposing this problem. There is already code in recordmcount.pl to handle such data blobs on the sparc64 platform. This patch uses the same method to handle those on powerpc as well. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Helge Deller authored
commit e60fc5aa upstream. On a 64bit kernel build the compiler aligns the _sifields union in the struct siginfo_t on a 64bit address. The __ARCH_SI_PREAMBLE_SIZE define compensates for this alignment and thus fixes the wait testcase of the strace package. The symptoms of a wrong __ARCH_SI_PREAMBLE_SIZE value is that _sigchld.si_stime variable is missed to be copied and thus after a copy_siginfo() will have uninitialized values. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Minchan Kim authored
commit 21ea9fb6 upstream. In balloon_page_dequeue, pages_lock should cover the loop (ie, list_for_each_entry_safe). Otherwise, the cursor page could be isolated by compaction and then list_del by isolation could poison the page->lru.{prev,next} so the loop finally could access wrong address like this. This patch fixes the bug. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 82 Comm: vballoon Not tainted 4.4.0-rc5-mm1-access_bit+ #1906 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800a7ff0000 ti: ffff8800a7fec000 task.ti: ffff8800a7fec000 RIP: 0010:[<ffffffff8115e754>] [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP: 0018:ffff8800a7fefdc0 EFLAGS: 00010246 RAX: ffff88013fff9a70 RBX: ffffea000056fe00 RCX: 0000000000002b7d RDX: ffff88013fff9a70 RSI: ffffea000056fe00 RDI: ffff88013fff9a68 RBP: ffff8800a7fefde8 R08: ffffea000056fda0 R09: 0000000000000000 R10: ffff8800a7fefd90 R11: 0000000000000001 R12: dead0000000000e0 R13: ffffea000056fe20 R14: ffff880138809070 R15: ffff880138809060 FS: 0000000000000000(0000) GS:ffff88013fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f229c10e000 CR3: 00000000b8b53000 CR4: 00000000000006a0 Stack: 0000000000000100 ffff880138809088 ffff880138809000 ffff880138809060 0000000000000046 ffff8800a7fefe28 ffffffff812c86d3 ffff880138809020 ffff880138809000 fffffffffff91900 0000000000000100 ffff880138809060 Call Trace: [<ffffffff812c86d3>] leak_balloon+0x93/0x1a0 [<ffffffff812c8bc7>] balloon+0x217/0x2a0 [<ffffffff8143739e>] ? __schedule+0x31e/0x8b0 [<ffffffff81078160>] ? abort_exclusive_wait+0xb0/0xb0 [<ffffffff812c89b0>] ? update_balloon_stats+0xf0/0xf0 [<ffffffff8105b6e9>] kthread+0xc9/0xe0 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 [<ffffffff8143b4af>] ret_from_fork+0x3f/0x70 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 Code: 8d 60 e0 0f 84 af 00 00 00 48 8b 43 20 a8 01 75 3b 48 89 d8 f0 0f ba 28 00 72 10 48 8b 03 f6 c4 08 75 2f 48 89 df e8 8c 83 f9 ff <49> 8b 44 24 20 4d 8d 6c 24 20 48 83 e8 20 4d 39 f5 74 7a 4c 89 RIP [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP <ffff8800a7fefdc0> ---[ end trace 43cf28060d708d5f ]--- Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Rafael Aquini <aquini@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Minchan Kim authored
commit f68b992b upstream. During my compaction-related stuff, I encountered a bug with ballooning. With repeated inflating and deflating cycle, guest memory( ie, cat /proc/meminfo | grep MemTotal) is decreased and couldn't be recovered. The reason is balloon_lock doesn't cover release_pages_balloon so struct virtio_balloon fields could be overwritten by race of fill_balloon(e,g, vb->*pfns could be critical). This patch fixes it in my test. Signed-off-by:
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by:
-
