- 05 Oct, 2008 3 commits
-
-
Rémi Denis-Courmont authored
Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rémi Denis-Courmont authored
Signed-off-by:
-
Herbert Xu authored
Found during the (partial) unregister_netdevice audit that we didn't have to have :) It looks like a couple of Sun NIC drivers had unregister_netdevice when they really meant unregister_netdev. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 01 Oct, 2008 30 commits
-
-
Vlad Yasevich authored
The INIT perameter carries the adapatation value in network-byte order. We need to store it in host byte order as expected by data types and the user API. Signed-off-by:Vlad Yasevich <vladislav.yasevich@hp.com>
-
Vlad Yasevich authored
This patch enables cookie-echo retransmission transport switch feature. If COOKIE-ECHO retransmission happens, it will be sent to the address other than the one last sent to. Signed-off-by:
Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by:
-
Wei Yongjun authored
RFC3873 defined SCTP_MIB_OUTOFBLUES: sctpOutOfBlues OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out of the blue packets received by the host. An out of the blue packet is an SCTP packet correctly formed, including the proper checksum, but for which the receiver was unable to identify an appropriate association." REFERENCE "Section 8.4 in RFC2960 deals with the Out-Of-The-Blue (OOTB) packet definition and procedures." But OOTB packet INIT, INIT-ACK and SHUTDOWN-ACK(COOKIE-WAIT or COOKIE-ECHOED state) are not counted by SCTP_MIB_OUTOFBLUES. Case 1(INIT): Endpoint A Endpoint B (CLOSED) (CLOSED) INIT ----------> <---------- ABORT Case 2(INIT-ACK): Endpoint A Endpoint B (CLOSED) (CLOSED) INIT-ACK ----------> <---------- ABORT Case 3(SHUTDOWN-ACK): Endpoint A Endpoint B (CLOSED) (CLOSED) <---------- INIT SHUTDOWN-ACK ----------> <---------- SHUTDOWN-COMPLETE Case 4(SHUTDOWN-ACK): Endpoint A Endpoint B (CLOSED) (COOKIE-ECHOED) SHUTDOWN-ACK ----------> <---------- SHUTDOWN-COMPLETE This patch fixed the problem. Signed-off-by:Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
-
Wei Yongjun authored
RFC 4960: Section 9.2 The sender of the SHUTDOWN MAY also start an overall guard timer 'T5-shutdown-guard' to bound the overall time for the shutdown sequence. At the expiration of this timer, the sender SHOULD abort the association by sending an ABORT chunk. If the 'T5-shutdown- guard' timer is used, it SHOULD be set to the recommended value of 5 times 'RTO.Max'. The timer 'T5-shutdown-guard' is used to counter the overall time for shutdown sequence, and it's start by the sender of the SHUTDOWN. So timer 'T5-shutdown-guard' should be start when we send the first SHUTDOWN chunk and enter the SHUTDOWN-SENT state, not start when we receipt of the SHUTDOWN primitive and enter SHUTDOWN-PENDING state. If 'T5-shutdown-guard' timer is start at SHUTDOWN-PENDING state, the association may be ABORT while data is still transmitting. Signed-off-by:
-
Vlad Yasevich authored
sctp_is_any() function that is used to check for wildcard addresses only looks at the address itself to determine the address family. This function is used in the API to check the address passed in from the user. If the user simply zerroes out the sockaddr_storage and pass that in, we'll end up failing. So, let's try harder to determine the address family by also checking the socket if it's possible. Signed-off-by: -
Neil Horman authored
sctp_chunks should be put on a diet. This is some of the low hanging fruit that we can strip out. Changes all the __s8/__u8 flags to bitfields. Saves 12 bytes per chunk. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Vlad Yasevich authored
Chunks placed on the retransmit list are marked as inelegible for fast retrasnmission. Since missing indications determine when fast reransmission is done, there is not point in calling sctp_mark_missing() on the retransmit list since those chunks will not be marked. Signed-off-by: -
Vlad Yasevich authored
There is a possibility of walking the transport list twice during SACK processing when doing SFR-CACC algorithm. We can restructure the code to only do this once. Signed-off-by: -
Vlad Yasevich authored
Frist small step in optimizing SACK processing. Do not call sctp_mark_missing() when there are no gaps reported and thus not missing chunks. Signed-off-by: -
KOVACS Krisztian authored
The iptables tproxy code has to be able to do UDP socket hash lookups, so we have to provide an exported lookup function for this purpose. Signed-off-by:
KOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by:
-
KOVACS Krisztian authored
Current TCP code relies on the local port of the listening socket being the same as the destination address of the incoming connection. Port redirection used by many transparent proxying techniques obviously breaks this, so we have to store the original destination port address. This patch extends struct inet_request_sock and stores the incoming destination port value there. It also modifies the handshake code to use that value as the source port when sending reply packets. Signed-off-by:
-
KOVACS Krisztian authored
Netfilter's ip_route_me_harder() tries to re-route packets either generated or re-routed by Netfilter. This patch changes ip_route_me_harder() to handle packets from non-locally-bound sockets with IP_TRANSPARENT set as local and to set the appropriate flowi flags when re-doing the routing lookup. Signed-off-by:
-
KOVACS Krisztian authored
The TCP stack sends out SYN+ACK/ACK/RST reply packets in response to incoming packets. The non-local source address check on output bites us again, as replies for transparently redirected traffic won't have a chance to leave the node. This patch selectively sets the FLOWI_FLAG_ANYSRC flag when doing the route lookup for those replies. Transparent replies are enabled if the listening socket has the transparent socket flag set. Signed-off-by:
-
KOVACS Krisztian authored
Set FLOWI_FLAG_ANYSRC in flowi->flags if the socket has the transparent socket option set. This way we selectively enable certain connections with non-local source addresses to be routed. Signed-off-by:
-
KOVACS Krisztian authored
inet_iif() in inet_sock.h requires route.h. Since users of inet_iif() usually require other route.h functionality anyway this patch moves inet_iif() to route.h. Signed-off-by:
-
Tóth László Attila authored
Setting IP_TRANSPARENT is not really useful without allowing non-local binds for the socket. To make user-space code simpler we allow these binds even if IP_TRANSPARENT is set but IP_FREEBIND is not. Signed-off-by:
Tóth László Attila <panther@balabit.hu> Signed-off-by:
-
KOVACS Krisztian authored
This patch introduces the IP_TRANSPARENT socket option: enabling that will make the IPv4 routing omit the non-local source address check on output. Setting IP_TRANSPARENT requires NET_ADMIN capability. Signed-off-by:
-
Julian Anastasov authored
ip_route_output() contains a check to make sure that no flows with non-local source IP addresses are routed. This obviously makes using such addresses impossible. This patch introduces a flowi flag which makes omitting this check possible. The new flag provides a way of handling transparent and non-transparent connections differently. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Herbert Xu authored
If the caller of pskb_expand_head specifies a negative nhead we'll silently overwrite other people's memory. This patch makes it BUG instead. Signed-off-by:
-
Herbert Xu authored
Herbert Xu came up with the idea and the original patch to make xfrm_state dump list contain also dumpers: As it is we go to extraordinary lengths to ensure that states don't go away while dumpers go to sleep. It's much easier if we just put the dumpers themselves on the list since they can't go away while they're going. I've also changed the order of addition on new states to prevent a never-ending dump. Timo Teräs improved the patch to apply cleanly to latest tree, modified iteration code to be more readable by using a common struct for entries in the list, implemented the same idea for xfrm_policy dumping and moved the af_key specific "last" entry caching to af_key. Signed-off-by:
Timo Teras <timo.teras@iki.fi> Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/wireless/ath9k/core.c drivers/net/wireless/ath9k/main.c net/core/dev.c
-
Timo Teras authored
Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while dumping is on-going. Signed-off-by: -
Ilpo Järvinen authored
$ diff-funcs ip6qhashfn reassembly.c netfilter/nf_conntrack_reasm.c --- reassembly.c:ip6qhashfn() +++ netfilter/nf_conntrack_reasm.c:ip6qhashfn() @@ -1,5 +1,5 @@ -static unsigned int ip6qhashfn(__be32 id, struct in6_addr *saddr, - struct in6_addr *daddr) +static unsigned int ip6qhashfn(__be32 id, const struct in6_addr *saddr, + const struct in6_addr *daddr) { u32 a, b, c; @@ -9,7 +9,7 @@ a += JHASH_GOLDEN_RATIO; b += JHASH_GOLDEN_RATIO; - c += ip6_frags.rnd; + c += nf_frags.rnd; __jhash_mix(a, b, c); a += (__force u32)saddr->s6_addr32[3]; And codiff xx.o.old xx.o.new: net/ipv6/netfilter/nf_conntrack_reasm.c: ip6qhashfn | -512 nf_hashfn | +6 nf_ct_frag6_gather | +36 3 functions changed, 42 bytes added, 512 bytes removed, diff: -470 net/ipv6/reassembly.c: ip6qhashfn | -512 ip6_hashfn | +7 ipv6_frag_rcv | +89 3 functions changed, 96 bytes added, 512 bytes removed, diff: -416 net/ipv6/reassembly.c: inet6_hash_frag | +510 1 function changed, 510 bytes added, diff: +510 Total: -376 Compile tested. Signed-off-by:Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by:
-
Arnaud Ebalard authored
ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to be initialized) when dst_alloc() is called from ip6_dst_blackhole(). Otherwise, it results in the following (xfrm_larval_drop is now set to 1 by default): [ 78.697642] Unable to handle kernel paging request for data at address 0x0000004c [ 78.703449] Faulting instruction address: 0xc0097f54 [ 78.786896] Oops: Kernel access of bad area, sig: 11 [#1] [ 78.792791] PowerMac [ 78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb [ 78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430 [ 78.809997] REGS: eef19ad0 TRAP: 0300 Not tainted (2.6.27-rc5) [ 78.815743] MSR: 00001032 <ME,IR,DR> CR: 22242482 XER: 20000000 [ 78.821550] DAR: 0000004c, DSISR: 40000000 [ 78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000 [ 78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000 [ 78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960 [ 78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30 [ 78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064 [ 78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94 [ 78.862581] LR [c0334a28] dst_alloc+0x40/0xc4 [ 78.868451] Call Trace: [ 78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable) [ 78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4 [ 78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc [ 78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88 [ 78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78 [ 78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4 [ 78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0 [ 78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210 [ 78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38 [ 78.927295] --- Exception: c01 at 0xfe2d730 [ 78.927297] LR = 0xfe2d71c [ 78.939019] Instruction dump: [ 78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378 [ 78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050 [ 78.956464] ---[ end trace 05fa1ed7972487a1 ]--- As commented by Benjamin Thery, the bug was introduced by f2fc6a54, while adding network namespaces support to ipv6 routes. Signed-off-by:
Arnaud Ebalard <arno@natisbad.org> Acked-by:
Benjamin Thery <benjamin.thery@bull.net> Signed-off-by:
-
Lennert Buytenhek authored
This gives a nice increase in the maximum loss-free packet forwarding rate in routing workloads. Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
-
Lennert Buytenhek authored
This patch adds skb_recycle_check(), which can be used by a network driver after transmitting an skb to check whether this skb can be recycled as a receive buffer. skb_recycle_check() checks that the skb is not shared or cloned, and that it is linear and its head portion large enough (as determined by the driver) to be recycled as a receive buffer. If these conditions are met, it does any necessary reference count dropping and cleans up the skbuff as if it just came from __alloc_skb(). Signed-off-by:
-
Denis V. Lunev authored
The following actions are possible: tcp_v6_rcv skb->dev = NULL; tcp_v6_do_rcv tcp_v6_hnd_req tcp_check_req req->rsk_ops->send_ack == tcp_v6_send_ack So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace from dst entry. Thanks to Vitaliy Gusev <vgusev@openvz.org> for initial problem finding in IPv4 code. Signed-off-by:Denis V. Lunev <den@openvz.org> Signed-off-by:
-
-
Vitaliy Gusev authored
Fix NULL dereference in tcp_4_send_ack(). As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs: BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0 IP: [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 Stack: ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020 Call Trace: <IRQ> [<ffffffff80499c33>] tcp_v4_reqsk_send_ack+0x20/0x22 [<ffffffff8049bce5>] tcp_check_req+0x108/0x14c [<ffffffff8047aaf7>] ? rt_intern_hash+0x322/0x33c [<ffffffff80499846>] tcp_v4_do_rcv+0x399/0x4ec [<ffffffff8045ce4b>] ? skb_checksum+0x4f/0x272 [<ffffffff80485b74>] ? __inet_lookup_listener+0x14a/0x15c [<ffffffff8049babc>] tcp_v4_rcv+0x6a1/0x701 [<ffffffff8047e739>] ip_local_deliver_finish+0x157/0x24a [<ffffffff8047ec9a>] ip_local_deliver+0x72/0x7c [<ffffffff8047e5bd>] ip_rcv_finish+0x38d/0x3b2 [<ffffffff803d3548>] ? scsi_io_completion+0x19d/0x39e [<ffffffff8047ebe5>] ip_rcv+0x2a2/0x2e5 [<ffffffff80462faa>] netif_receive_skb+0x293/0x303 [<ffffffff80465a9b>] process_backlog+0x80/0xd0 [<ffffffff802630b4>] ? __rcu_process_callbacks+0x125/0x1b4 [<ffffffff8046560e>] net_rx_action+0xb9/0x17f [<ffffffff80234cc5>] __do_softirq+0xa3/0x164 [<ffffffff8020c52c>] call_softirq+0x1c/0x28 <EOI> [<ffffffff8020de1c>] do_softirq+0x34/0x72 [<ffffffff80234b8e>] local_bh_enable_ip+0x3f/0x50 [<ffffffff804d43ca>] _spin_unlock_bh+0x12/0x14 [<ffffffff804599cd>] release_sock+0xb8/0xc1 [<ffffffff804a6f9a>] inet_stream_connect+0x146/0x25c [<ffffffff80243078>] ? autoremove_wake_function+0x0/0x38 [<ffffffff8045751f>] sys_connect+0x68/0x8e [<ffffffff80291818>] ? fd_install+0x5f/0x68 [<ffffffff80457784>] ? sock_map_fd+0x55/0x62 [<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80 Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48 RIP [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 RSP <ffffffff80762b78> CR2: 00000000000004d0 Signed-off-by:
Vitaliy Gusev <vgusev@openvz.org> Signed-off-by:
-
Remi Denis-Courmont authored
From: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
- 30 Sep, 2008 7 commits
-
-
Nick Kossifidis authored
* Add support for AR2417 (include pci id) since my previous patch doesn't sit on top of base.c/ath5k.h anymore. * Update module version to 0.6.0 Changes-Licensed-under: ISC Signed-Off-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Nick Kossifidis authored
* Fix srev reporting during attach Changes-Licensed-under: ISC Signed-Off-by:
-
Nick Kossifidis authored
* Use QUIET mechanism to drain tx buffer on PCU for newer chips * Make sure that INTPEND is really 1 and not 0xffffffff while checking for pending interrupts Changes-Licensed-under: ISC Signed-Off-by:
-
Nick Kossifidis authored
* Use new SREV values and PHY srevs to identify radio type durring attach Changes-Licensed-under: ISC Signed-Off-by:
-
Larry Finger authored
One of the spin-on-condition loops in routine do_dummy_tx always exits before the condition is satisfied. The hardware might be left in an inconsistent state that might be the cause of the PHY transmission errors seen by some users. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Nick Kossifidis authored
* Update registers * Update SREV values and add some PHY srevs * Prepare ath5k.h for newer radios etc Thanks to Atheros 's HAL source we now know for sure how many parts we have and what their SREV values are. We also have some updates on registers. Prepare ath5k for some major updates ;-) My previous mail had 2 more patches following (git log misusage), sorry for double posting ;-( Changes-Licensed-under: ISC Signed-Off-by:
-
Bob Copeland authored
According to the newly-released Atheros HAL code, asserting the TSF reset bit will toggle a hardware internal state, resulting in a spurious reset on the next chip reset. Whenever we force a TSF bit, write the bit twice to clear the internal signal. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Acked-by:
-
