- 11 Aug, 2023 40 commits
-
-
Kiran K authored
Devices from /sys/kernel/debug/usb/devices: T: Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0036 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Chris Lu authored
Add VID/PID 0489/e0f6 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f6 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
Chris Lu <chris.lu@mediatek.com> Signed-off-by:
-
Dan Carpenter authored
Return negative -EIO instead of positive EIO. Fixes: 926df8962f3f ("Bluetooth: msft: Extended monitor tracking by address filter") Signed-off-by:Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Iulia Tanasescu authored
Some use cases require the user to be informed if BIG synchronization fails. This commit makes it so that even if the BIG sync established event arrives with error status, a new hconn is added for each BIS, and the iso layer is notified about the failed connections. Unsuccesful bis connections will be marked using the HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event is triggered on the newly allocated bis sockets, before adding them to the accept list of the parent socket. From user space, a new fd for each failed bis connection will be obtained by calling accept. The user should check for the POLLERR event on the new socket, to determine if the connection was successful or not. The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync has been successfully established. This flag is checked at bis cleanup, so the HCI LE BIG Terminate Sync command is only issued if needed. The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called for a listening socket, to avoid issuing the command everytime a BIGInfo advertising report is received. Signed-off-by:
Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by:
-
Valentin David authored
Asus ROG Ally gaming computer has a MediaTek MT7922 chip that uses USB id 0489:e0f5 and needs to be added to the table. Without this, the device is not usable and gives the following error: Bluetooth: hci0: Opcode 0x c03 failed: -110 Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f5 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
Valentin David <valentin.david@gmail.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
This attempts to always allocate a unique handle for connections so they can be properly aborted by the likes of hci_abort_conn, so this uses the invalid range as a pool of unset handles that way if userspace is trying to create multiple connections at once each will be given a unique handle which will be considered unset. Signed-off-by: -
Luiz Augusto von Dentz authored
ISO_LINK connections where not being handled properly on hci_abort_conn_sync which sometimes resulted in sending the wrong commands, or in case of having the reject command being sent by the socket code (iso.c) which is sort of a layer violation. Signed-off-by: -
Luiz Augusto von Dentz authored
This consolidates code for aborting connections using hci_cmd_sync_queue so it is synchronized with other threads, but because of the fact that some commands may block the cmd_sync_queue while waiting specific events this attempt to cancel those requests by using hci_cmd_sync_cancel. Signed-off-by: -
Jing Cai authored
This patch implement function .coredump() and dmp_hdr() in btusb driver for MediaTek controller. FW core dump was triggered by FW specific event to show something unexpected happened in the controller. The driver would be responsible for collecting and uploading the device core dump pieces in hci driver using core dump API. Once we finished the whole process, the driver would reset the controller to recover the kind of fatal error. Co-developed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Jing Cai <jing.cai@mediatek.com> Signed-off-by:
-
Jing Cai authored
Introduce btmtk_reset_work which can be called whenever the firmware abort, HCI command timeout, other fatal error happen. Co-developed-by:
-
Sean Wang authored
Use readx_poll_timeout instead of open coding to poll the hardware reset status until it is done. Signed-off-by:
-
Chris Lu authored
Add printing firmware information part when driver loading firmware that user can get mediatek bluetooth information. Co-developed-by:
-
Kiran K authored
Add hardware variant(0x1c) for Gale Peak core (CNVi). Signed-off-by:
-
Claudia Draghicescu authored
In the case of a Synchronized Receiver capable device, enable at start-up the events for PA reports, PA Sync Established and Big Info Adv reports. Signed-off-by:
Claudia Draghicescu <claudia.rosu@nxp.com> Signed-off-by:
-
Hilda Wu authored
Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by:Alex Lu <alex_lu@realsil.com.cn> Signed-off-by:
Hilda Wu <hildawu@realtek.com> Reviewed-by:
-
Peter Tsao authored
This patch is added support Mediatek MT7925. 1. The firmware location of MT7925 will set to /lib/firmware/mediatek/mt7925 2. Add Mediatek private data in hdev to record the device for handle MT7925 flow. 3. Use the recoreded dev_id to condition chip reset flow. The information in /sys/kernel/debug/usb/devices about the MT7925U Bluetooth device is listed as the below T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 27 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=7925 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 5 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8f(I) Atr=03(Int.) MxPS= 2 Ivl=125us I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us I:* If#= 3 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 2 Ivl=125us Signed-off-by:
Peter Tsao <peter.tsao@mediatek.com> Signed-off-by:
-
Kiran K authored
New Intel platforms supports reset of Bluetooth device via ACPI DSM methods. The legacy reset mechanism via GPIO will be deprecated in future. This patch checks the platform support for reset methods and if supported uses the same instead of legacy GPIO toggling method. ACPI firmware supports two types of reset method based on NIC card. (Discrete or Integrated). 1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and BT_IF_SELECT lines are driven by a register in PCH cluster. This interface is supported on discrete BT solution. 2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to physical GPIO from PCH. The DSM interface shall toggle this to recover from error. Signed-off-by:
-
Sai Teja Aluvala authored
Intercept debug exception events from QCA controller and put them into a devcoredump using hci devcoredump APIs of hci_core Signed-off-by:
Sai Teja Aluvala <quic_saluvala@quicinc.com> V2 -> V3: --------- changed hci_coredump_qca function V1 -> V2: --------- Updated to work with the updated HCI devcoredump API. Signed-off-by:
-
Sai Teja Aluvala authored
This patch implements the hci_qca driver side .coredump() callback to trigger a devcoredump via sysfs. Signed-off-by:
-
Iulia Tanasescu authored
This adds support for creating multiple BIGs. According to spec, each BIG shall have an unique handle, and each BIG should be associated with a different advertising handle. Otherwise, the LE Create BIG command will fail, with error code Command Disallowed (for reusing a BIG handle), or Unknown Advertising Identifier (for reusing an advertising handle). The btmon snippet below shows an exercise for creating two BIGs for the same controller, by opening two isotest instances with the following command: tools/isotest -i hci0 -s 00:00:00:00:00:00 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x00 Advertising Handle: 0x01 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 21 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x00 BIG Synchronization Delay: 912 us (0x000390) Transport Latency: 912 us (0x000390) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) Handle: 0x01 Advertising Handle: 0x02 Number of BIS: 1 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) Signed-off-by: -
Luiz Augusto von Dentz authored
This stores scm_creds into hci_skb_cb so they can be properly forwarded to the likes of btmon which is then able to print information about the process who is originating the traffic: bluetoothd[35]: @ MGMT Command: Rea.. (0x0001) plen 0 {0x0001} @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} Read Management Version Information (0x0001) plen 3 bluetoothd[35]: < ACL Data T.. flags 0x00 dlen 41 ATT: Write Command (0x52) len 36 Handle: 0x0043 Type: ASE Control Point (0x2bc6) Data: 020203000110270000022800020a00409c0001000110270000022800020a00409c00 Opcode: QoS Configuration (0x02) Number of ASE(s): 2 ASE: #0 ASE ID: 0x03 CIG ID: 0x00 CIS ID: 0x01 SDU Interval: 10000 usec Framing: Unframed (0x00) PHY: 0x02 LE 2M PHY (0x02) Max SDU: 40 RTN: 2 Max Transport Latency: 10 Presentation Delay: 40000 us ASE: #1 ASE ID: 0x01 CIG ID: 0x00 CIS ID: 0x01 SDU Interval: 10000 usec Framing: Unframed (0x00) PHY: 0x02 LE 2M PHY (0x02) Max SDU: 40 RTN: 2 Max Transport Latency: 10 Presentation Delay: 40000 us Signed-off-by: -
Luiz Augusto von Dentz authored
This makes sure peer information is always available via sock when using bt_sock_alloc. Signed-off-by: -
Luiz Augusto von Dentz authored
This consolidates code around sk_alloc into bt_sock_alloc which does take care of common initialization. Signed-off-by: -
Max Chou authored
The original code did not determine the length value of the HCI command for drop fw even there's no parameter needed. In this commit, use struct hci_command_hdr to manage opcode and length. It would be more regular and more readable. Suggested-by:
Max Chou <max.chou@realtek.com> Signed-off-by:
-
Pauli Virtanen authored
LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by:Pauli Virtanen <pav@iki.fi> Signed-off-by:
-
Iulia Tanasescu authored
It is required for some configurations to have multiple BISes as part of the same BIG. Similar to the flow implemented for unicast, DEFER_SETUP will also be used to bind multiple BISes for the same BIG, before starting Periodic Advertising and creating the BIG. The user will have to open a new socket for each BIS. By setting the BT_DEFER_SETUP socket option and calling connect, a new connection will be added for the BIG and advertising handle set by the socket QoS parameters. Since all BISes will be bound for the same BIG and advertising handle, the socket QoS options and base parameters should match for all connections. By calling connect on a socket that does not have the BT_DEFER_SETUP option set, periodic advertising will be started and the BIG will be created, with a BIS for each previously bound connection. Since a BIG cannot be reconfigured with additional BISes after creation, no more connections can be bound for the BIG after the start periodic advertising and create BIG commands have been queued. The bis_cleanup function has also been updated, so that the advertising set and the BIG will not be terminated unless there are no more bound or connected BISes. The HCI_CONN_BIG_CREATED connection flag has been added to indicate that the BIG has been successfully created. This flag is checked at bis_cleanup, so that the BIG is only terminated if the HCI_LE_Create_BIG_Complete has been received. This implementation has been tested on hardware, using the "isotest" tool with an additional command line option, to specify the number of BISes to create as part of the desired BIG: tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1 The btmon log shows that a BIG containing 2 BISes has been created: < HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31 Handle: 0x01 Advertising Handle: 0x01 Number of BIS: 2 SDU Interval: 10000 us (0x002710) Maximum SDU size: 40 Maximum Latency: 10 ms (0x000a) RTN: 0x02 PHY: LE 2M (0x02) Packing: Sequential (0x00) Framing: Unframed (0x00) Encryption: 0x00 Broadcast Code: 00000000000000000000000000000000 > HCI Event: Command Status (0x0f) plen 4 LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 23 LE Broadcast Isochronous Group Complete (0x1b) Status: Success (0x00) Handle: 0x01 BIG Synchronization Delay: 1974 us (0x0007b6) Transport Latency: 1974 us (0x0007b6) PHY: LE 2M (0x02) NSE: 3 BN: 1 PTO: 1 IRC: 3 Maximum PDU: 40 ISO Interval: 10.00 msec (0x0008) Connection Handle #0: 10 Connection Handle #1: 11 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 10 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 10 < HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13 Handle: 11 Data Path Direction: Input (Host to Controller) (0x00) Data Path: HCI (0x00) Coding Format: Transparent (0x03) Company Codec ID: Ericsson Technology Licensing (0) Vendor Codec ID: 0 Controller Delay: 0 us (0x000000) Codec Configuration Length: 0 Codec Configuration: > HCI Event: Command Complete (0x0e) plen 6 LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 Status: Success (0x00) Handle: 11 < ISO Data TX: Handle 10 flags 0x02 dlen 44 < ISO Data TX: Handle 11 flags 0x02 dlen 44 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 10 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 11 Count: 1 Signed-off-by: -
Hilda Wu authored
Catch debug exception from controller and driver, and trigger a devcoredump using hci devcoredump APIs. The debug exception data will be parsed in userspace. Signed-off-by:
-
Claudia Draghicescu authored
This patch checks for ISO_BROADCASTER and ISO_SYNC_RECEIVER in controller. Signed-off-by:
-
David S. Miller authored
Alexis Lothoré says: ==================== net: dsa: rzn1-a5psw: add support for vlan and .port_bridge_flags this series enables vlan support in Renesas RZN1 internal ethernet switch, and is a follow up to the work initiated by Clement Leger a few months ago, who handed me over the topic. This new revision aims to iron the last few points raised by Vladimir to ensure that the driver is in line with switch drivers expectations, and is based on the lengthy discussion in [1] (thanks Vladimir for the valuable explanations) [1] https://lore.kernel.org/netdev/20230314163651.242259-1-clement.leger@bootlin.com/ ---- V5: - ensure that flooding can be enabled only if port belongs to a bridge - enable learning in a5psw_port_stp_state_set() only if port has learning enabled - toggle vlan tagging on vlan filtering in - removed reviewed-by on second patch since its modified RESEND V4: - Resent due to net-next being closed V4: - Fix missing CPU port bit in a5psw->bridged_ports - Use unsigned int for vlan_res_id parameters - Rename a5psw_get_vlan_res_entry() to a5psw_new_vlan_res_entry() - In a5psw_port_vlan_add(), return -ENOSPC when no VLAN entry is found - In a5psw_port_vlan_filtering(), compute "val" from "mask" V3: - Target net-next tree and correct version... V2: - Fixed a few formatting errors - Add .port_bridge_flags implementation ==================== Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Clément Léger authored
Add support for vlan operation (add, del, filtering) on the RZN1 driver. The a5psw switch supports up to 32 VLAN IDs with filtering, tagged/untagged VLANs and PVID for each ports. Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Signed-off-by:
Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by:
-
Clément Léger authored
When running vlan test (bridge_vlan_aware/unaware.sh), there were some failure due to the lack .port_bridge_flag function to disable port flooding. Implement this operation for BR_LEARNING, BR_FLOOD, BR_MCAST_FLOOD and BR_BCAST_FLOOD. Since .port_bridge_flags affects the bits disabling learning for a port, ensure that any other modification on the same register done by a5psw_port_stp_state_set is in sync by using the port learning state to enable/disable learning on the port. Signed-off-by:
-
Clément Léger authored
.port_bridge_flags will be added and allows to modify the flood mask independently for each port. Keeping the existing bridged_ports write in a5psw_flooding_set_resolution() would potentially messed up this. Use a read-modify-write to set that value and move bridged_ports handling in bridge_port_join/leave. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Hariprasad Kelam authored
The current implementation does not allow the user to enable both hw-tc-offload and ntuple features on the interface. These checks are added as TC flower offload and ntuple features internally configures the same hardware resource MCAM. But TC HTB offload configures the transmit scheduler which can be safely enabled on the interface with ntuple feature. This patch adds the same and ensures only TC flower offload and ntuple features are mutually exclusive. Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
David S. Miller authored
Zhengchao Shao says: ==================== bonding: do some cleanups in bond driver Do some cleanups in bond driver. --- v2: use IS_ERR instead of NULL check in patch 2/5, update commit information in patch 3/5, remove inline modifier in patch 4/5 ==================== Reviewed-by:Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Zhengchao Shao authored
The free_percpu function also could check whether "rr_tx_counter" parameter is NULL. Therefore, remove NULL check in bond_destructor. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
-
Zhengchao Shao authored
In bond_reset_slave_arr(), values are assigned and memory is released only when the variables "usable" and "all" are not NULL. But even if the "usable" and "all" variables are NULL, they can still work, because value will be checked in kfree_rcu. Therefore, use bond_set_slave_arr() and set the input parameters "usable_slaves" and "all_slaves" to NULL to simplify the code in bond_reset_slave_arr(). And the same to bond_uninit(). Signed-off-by:
-
Zhengchao Shao authored
Because debugfs_create_dir returns ERR_PTR, so bonding_debug_root will never be NULL. Remove redundant NULL check for bonding_debug_root in debugfs function. The later debugfs_create_dir/debugfs_remove_recursive /debugfs_remove_recursive functions will check the dentry with IS_ERR(). Signed-off-by:
-
Zhengchao Shao authored
Because debugfs_create_dir returns ERR_PTR, so IS_ERR should be used to check whether the directory is successfully created. Signed-off-by:
-
Zhengchao Shao authored
Some functions are only used in initialization and exit functions, so add the __init/__net_init and __net_exit modifiers to these functions. Signed-off-by:
-
Krzysztof Kozlowski authored
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: mvmdio.c:272:9: error: cast to smaller integer type 'enum orion_mdio_bus_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
