- 03 Feb, 2017 18 commits
-
-
Raghava Aditya Renukunta authored
This patch adds support to retrieve the unique identifier data (VPD page 83 type3) for Logical drives created on SmartIOC 2000 products. In addition added a sysfs device structure to expose the id information. Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
Dave Carroll <David.Carroll@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Added task management command support to abort any timed out commands in case of a eh_abort call and to reset lun's in case of eh_reset call. Signed-off-by:
-
Raghava Aditya Renukunta authored
Added support to send out task management commands. [mkp: removed // fibsize... ] Signed-off-by:
-
Raghava Aditya Renukunta authored
Added support to send direct pasthru srb commands from management utilty to the controller. Signed-off-by:
-
Raghava Aditya Renukunta authored
Added support for drive hotplug add and removal Signed-off-by:
-
Raghava Aditya Renukunta authored
Added support to set qd of drives in slave_configure.This only works for HBA1000 attached drives. Signed-off-by:
-
Raghava Aditya Renukunta authored
Retrieved queue depth from fw and saved it for future use. Only applicable for HBA1000 drives. Signed-off-by:
-
Raghava Aditya Renukunta authored
This patch adds a new functions that periodically sync the time of host to the adapter. In addition also informs the adapter that the driver is alive and kicking. Only applicable to the HBA1000 and SMARTIOC2000. Signed-off-by:
-
Raghava Aditya Renukunta authored
Reworked aac_command_thread into aac_process_events Signed-off-by:
-
Raghava Aditya Renukunta authored
This patch processes Raw IO read medium errors. Signed-off-by:
-
Raghava Aditya Renukunta authored
This patch enables the driver to actually process the I/O, or srb replies from adapter. In addition to any HBA1000 or SmartIOC2000 adapter events. Signed-off-by:
-
Raghava Aditya Renukunta authored
Make sure that the driver processes error conditions even in the fast response path for response from the adapter. Signed-off-by:
-
Raghava Aditya Renukunta authored
Moved the READ and WRITE switch cases to the top. Added a default case to the switch case and replaced duplicate scsi result value with a macro. The idea is that since most of scsi commands we care about performance wise are read or write, we need to process them first. Internally the compiler (GCC) converts a switch case into either a jump table or a bunch of if else conditions, so placing the often used read, write cases at the top is an effort in optimization. Signed-off-by:
-
Raghava Aditya Renukunta authored
This patch adds support to retrieve the type of each adapter connected device. Applicable to HBA1000 and SmartIOC2000 products Signed-off-by:
-
Raghava Aditya Renukunta authored
sa_firmware adds the capability to differentiate the new SmartIOC family of adapters from the series 8 and below. Signed-off-by:
-
Raghava Aditya Renukunta authored
This patch lays the groundwork for supporting the new HBA-1000 controller family.A new INIT structure INIT_STRUCT_8 has been added which allows for a variable size for MSI-x vectors among other things, and is used for both Series-8, HBA-1000 and SmartIOC-2000. Signed-off-by:
-
Raghava Aditya Renukunta authored
Added aacraid.h include guard Signed-off-by:
-
Raghava Aditya Renukunta authored
Removed duplicate code that for acquiring and releasing irqs Signed-off-by:
-
- 01 Feb, 2017 13 commits
-
-
Lukas Herbolt authored
[mkp: whitespace fixes] Signed-off-by:
Lukas Herbolt <lherbolt@redhat.com> Signed-off-by:
-
Chaitra P B authored
Updated driver version to "15.100.00.00" Signed-off-by:
Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by:
-
Chaitra P B authored
Due existence of loop in the IO path our HBA will receive heavy IOs and also as driver is not updating the Reply Post Host Index frequently, So there will be a high chance that our Firmware unable to find any free entry in the Reply Post Descriptor Queue (i.e. Queue overflow occurs) and can observe 0x2100 firmware fault. So to fix this, we have defined a thresh hold value. After continuously processing this thresh hold number of reply descriptors driver will update the Reply Descriptor Host Index so that this thresh hold number of reply descriptors entries will be freed and these entries will be available for firmware and we won't observe this Firmware fault. We have defined this threshold value as 1/3rd of the hba queue depth. Signed-off-by:
-
Chaitra P B authored
Small glitch/degraded performance in Crusader is improved with SAS drives by removing unnecessary spinlocks while clearing scsi command in drivers internal lookup table. Signed-off-by:
-
Chaitra P B authored
Driver processes the event MPI26_EVENT_ACTIVE_CABLE_DEGRADED when a cable is present and is running at a degraded speed (below the SAS3 12 Gb/s rate). Prints added to inform the user that the cable is not running at optimal speed. Signed-off-by:
-
Don Brace authored
- Setting coalescing has a significant negative impact on low queue-depth performance. - Does not help high queue-depth performance. Signed-off-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Christoph Hellwig authored
Remove a piece of code in storvsc_queuecommand that tries to pass the physical address of the kernel struct scatterlist pointer to the host. Fortunately the code can't ever be reached anyway. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Finn Thain authored
The atari_scsi driver should not access Falcon DMA chip registers unless it has acquired exclusive access to that chip. If the driver doesn't have exclusive access then there's no need for a DMA reset as there are no scsi commands in progress. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Tested-by:
Ondrej Zary <linux@rainbow-software.org> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Finn Thain authored
Handle timeout or bus phase change errors that could occur when sending the IDENTIFY message. Signed-off-by:
-
Finn Thain authored
Avoid various warnings from "make C=1" by annotating a couple of unlock-then-lock sequences, replacing a zero with NULL and correcting some type casts. Also avoid a warning from "make W=1" by adding braces. Signed-off-by:
-
Finn Thain authored
The NCR5380 wrapper drivers don't export symbols or declarations and don't actually need separate header files. Most of these header files were removed already; only sun3_scsi.h and g_NCR5380.h remain. Move the remaining definitions to the corresponding .c files to improve readability and proximity. The #defines which influence the #included core driver are no longer mixed up with unrelated #defines and #includes. Signed-off-by:
-
Finn Thain authored
Remove dead code inside #if 0 conditionals. Remove the #ifdef __KERNEL__ test, since NCR5380.h has no definitions that relate to userspace code. Remove two redundant macro definitions which were overlooked in commit e9db3198 ("sun3_scsi: Adopt NCR5380.c core driver"). Signed-off-by:
-
Finn Thain authored
The DIFFERENTIAL and PARITY option macros are unused: no supported hardware uses differential signalling and the core driver never implemented parity checking. These options just waste space in the host info string. While we are here, fix a typo in the NCR5380_info() kernel-doc comment. Signed-off-by:
-
- 21 Jan, 2017 7 commits
-
-
Xiang Chen authored
There is an issue that hisi_sas_dev.running_req is not decremented properly for internal abort and TMF. To resolve, only decrease running_req in hisi_sas_slot_task_free() Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
-
Xiang Chen authored
There is a potential probe issue in how we trigger the hw initialisation. Although we use 1s timer to delay hw initialisation, there is still a potential that sas_register_ha() is not be finished before we start the PHY init from hw->hw_init(). To avoid this issue, initialise the hw after sas_register_ha() in the same probe context. Note: it is not necessary to use 1s timer now (modified v2 hw only). Signed-off-by:
-
John Garry authored
Downgrade the exit print in hisi_sas_internal_task_abort() to dbg level, as info is not required. Signed-off-by:
-
Xiang Chen authored
Correctly set registers in v2 for root PHY hardreset for directly attached disk. Signed-off-by:
-
John Garry authored
The message to inform that the controller has no refclk is currently at warning level, which is unnecessary, so downgrade to debug. Signed-off-by:
-
Xiang Chen authored
Set SMP connection timeout and continue AWT timer; Clear ITCT table when dev gone. Signed-off-by:
-
Xiang Chen authored
The v2 SAS controller needs more time to detect channel idle and send setup link request than SATA disk does, so it is difficult for the SAS controller to setup an STP link. Therefore it may cause some IO timeouts. We need to periodically configure the SAS controller so it doesn't receive STP setup requests from SATA disks for a while, so IO can be sent during this period. Signed-off-by:
-
- 20 Jan, 2017 2 commits
-
-
James Smart authored
When I reversed the patch to re-add the lpfc_soft_wwn parameter feature, it re-added code that had a long-standing bug. (that's what I get I guess :) As Dan Carpenter pointed out - error checks looked at wrong polarity. 0 is success, -errno is failure. Updated checks. Signed-off-by:
James Smart <james.smart@broadcom.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
John Pittman authored
In sd.c there are two comment references to 'struct scsi_device *sdp' as an argument. One of the references has a typo and the other should be a reference to 'struct device *dev' instead. Fixed by correcting the typo in the first and changing the explanation in the second. Signed-off-by:
John Pittman <jpittman@redhat.com> Signed-off-by:
-
