- 25 Jun, 2013 4 commits
-
-
Aruna Balakrishnaiah authored
Since now we have pstore support for nvram in pseries, enable it in the default config. With this config option enabled, pstore infra-structure will be used to read/write the messages from/to nvram. Signed-off-by:
Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
In 9422de3e "powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers" we changed the way we mark extraneous irqs with this: - info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) && - (dar - bp->attr.bp_addr < bp->attr.bp_len)); + if (!((bp->attr.bp_addr <= dar) && + (dar - bp->attr.bp_addr < bp->attr.bp_len))) + info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; Unfortunately this is bogus as it never clears extraneous IRQ if it's already set. This correctly clears extraneous IRQ before possibly setting it. Signed-off-by:
Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Michael Neuling authored
The smallest match region for both the DABR and DAWR is 8 bytes, so the kernel needs to filter matches when users want to look at regions smaller than this. Currently we set the length of PPC_BREAKPOINT_MODE_EXACT breakpoints to 8. This is wrong as in exact mode we should only match on 1 address, hence the length should be 1. This ensures that the kernel will filter out any exact mode hardware breakpoint matches on any addresses other than the requested one. Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
- 21 Jun, 2013 20 commits
-
-
Aneesh Kumar K.V authored
Hugepage invalidate involves invalidating multiple hpte entries. Optimize the operation using H_BULK_REMOVE on lpar platforms. On native, reduce the number of tlb flush. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
We enable only if the we support 16MB page size. Reviewed-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
We find all the overlapping vma and mark them such that we don't allocate hugepage in that range. Also we split existing huge page so that the normal page hash can be invalidated and new page faulted in with new protection bits. Signed-off-by:
-
Aneesh Kumar K.V authored
With THP we set pmd to none, before we do pte_clear. Hence we can't walk page table to get the pte lock ptr and verify whether it is locked. THP do take pte lock before calling pte_clear. So we don't change the locking rules here. It is that we can't use page table walking to check whether pte locks are held with THP. Signed-off-by:
-
Aneesh Kumar K.V authored
GCC is very likely to read the pagetables just once and cache them in the local stack or in a register, but it is can also decide to re-read the pagetables. The problem is that the pagetable in those places can change from under gcc. With THP/hugetlbfs the pmd (and pgd for hugetlbfs giga pages) can change under gup_fast. The pages won't be freed untill we finish gup fast because we have irq disabled and we free these pages via rcu callback. Signed-off-by:
-
Aneesh Kumar K.V authored
We need to have irqs disabled to handle all the possible parallel update for linux page table without holding locks. Events that we are intersted in while walking page tables are 1) Page fault 2) umap 3) THP split 4) THP collapse A) local_irq_disabled: ------------------------ 1) page fault: A none to valid transition via page fault is not an issue because we would either see a none or valid. If it is none, we would error out the page table walk. We may need to use on stack values when checking for type of page table elements, because if we do if (!is_hugepd()) { if (!pmd_none() { if (pmd_bad() { We could take that bad condition because the pmd got converted to a hugepd after the !is_hugepd check via a hugetlb fault. The right way would be to check for pmd_none higher up or use on stack value. 2) A valid to none conversion via unmap: We can safely walk the upper level table, because we don't remove the the page table entries until rcu grace period. So even if we followed a wrong pointer we still have the pointer valid till the grace period. A PTE pointer returned need to be atomically checked for _PAGE_PRESENT and _PAGE_BUSY. A valid pointer returned could becoming none later. To prevent pte_clear we take _PAGE_BUSY. 3) THP split: A valid transparent hugepage is converted to nomal page. Before we split we do pmd_splitting_flush, which sets the hugepage PTE to _PAGE_SPLITTING So when walking page table we need to check for pmd_trans_splitting and handle that. The pte returned should also need to be checked for _PAGE_SPLITTING before setting _PAGE_BUSY similar to _PAGE_PRESENT. We save the value of PTE on stack and check for the flag in the local pte value. If we don't have the value set we can safely operate on the local pte value and we atomicaly set _PAGE_BUSY. 4) THP collapse: A normal page gets converted to hugepage. In the collapse path, we mark the pmd none early (pmdp_clear_flush). With irq disabled, if we are aleady walking page table we would see the pmd_none and won't continue. If we see a valid PMD, we should still check for _PAGE_PRESENT before setting _PAGE_BUSY, to make sure we didn't collapse the PTE to a Huge PTE. Signed-off-by: -
Aneesh Kumar K.V authored
The deposted PTE page in the second half of the PMD table is used to track the state on hash PTEs. After updating the HPTE, we mark the coresponding slot in the deposted PTE page valid. Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Aneesh Kumar K.V authored
Reviewed-by:
-
Aneesh Kumar K.V authored
We can find pte that are splitting while walking page tables. Return None pte in that case. Signed-off-by:
-
Aneesh Kumar K.V authored
Replace find_linux_pte with find_linux_pte_or_hugepte and explicitly document why we don't need to handle transparent hugepages at callsites. Signed-off-by:
-
Aneesh Kumar K.V authored
Reviewed-by:
-
Aneesh Kumar K.V authored
We will use this in the later patch for handling THP pages Reviewed-by:
-
Aneesh Kumar K.V authored
We now have pmd entries covering 16MB range and the PMD table double its original size. We use the second half of the PMD table to deposit the pgtable (PTE page). The depoisted PTE page is further used to track the HPTE information. The information include [ secondary group | 3 bit hidx | valid ]. We use one byte per each HPTE entry. With 16MB hugepage and 64K HPTE we need 256 entries and with 4K HPTE we need 4096 entries. Both will fit in a 4K PTE page. On hugepage invalidate we need to walk the PTE page and invalidate all valid HPTEs. This patch implements necessary arch specific functions for THP support and also hugepage invalidate logic. These PMD related functions are intentionally kept similar to their PTE counter-part. Signed-off-by:
-
Aneesh Kumar K.V authored
THP code does PTE page allocation along with large page request and deposit them for later use. This is to ensure that we won't have any failures when we split hugepages to regular pages. On powerpc we want to use the deposited PTE page for storing hash pte slot and secondary bit information for the HPTEs. We use the second half of the pmd table to save the deposted PTE page. Reviewed-by:
-
Aneesh Kumar K.V authored
If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. With hugepages, we need to pass the correct actual page size value for tlb invalidation. This change update the patch 0608d692 "powerpc/mm: Always invalidate tlb on hpte invalidate and update" to handle transparent hugepages correctly. Signed-off-by:
-
Gavin Shan authored
The patch creates debugfs entries (powerpc/PCIxxxx/err_injct) for injecting EEH errors for testing purpose. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
The patch creates one debugfs directory ("powerpc/PCIxxxx") for each PHB so that we can hook EEH error injection debugfs entry there in proceeding patch. Signed-off-by: -
Gavin Shan authored
The patch registers OPAL event notifier and process the PCI errors from firmware. If we have pending PCI errors, special EEH event (without binding PE) will be sent to EEH core for processing. Signed-off-by:
-
Gavin Shan authored
While we're restarting or powering off the system, we needn't the OPAL notifier any more. So just to disable that. Signed-off-by:
-
Gavin Shan authored
This patch implements a notifier to receive a notification on OPAL event mask changes. The notifier is only called as a result of an OPAL interrupt, which will happen upon reception of FSP messages or PCI errors. Any event mask change detected as a result of opal_poll_events() will not result in a notifier call. [benh: changelog] Signed-off-by:
-
- 20 Jun, 2013 16 commits
-
-
Gavin Shan authored
It's meaningless to handle frozen PE if we already had fenced PHB. The patch intends to check the PHB state before checking PE. If the PHB has been put into fenced state, we need take care of that firstly. Signed-off-by:
-
Gavin Shan authored
The patch enables EEH check and let EEH core to process the EEH errors for PowerNV platform while accessing config space. Originally, the implementation already had mechanism to check EEH errors and tried to recover from them. However, we never let EEH core to handle the EEH errors. Signed-off-by:
-
Gavin Shan authored
The patch initializes EEH for PowerNV platform. Because the OPAL APIs requires HUB ID, we need trace that through struct pnv_phb. Signed-off-by:
-
Gavin Shan authored
The patch adds EEH backends for PowerNV platform. It's notable that part of those EEH backends call to the I/O chip dependent backends. [Removed pointless change to eeh_pseries.c -- BenH] Signed-off-by:
-
Gavin Shan authored
The patch implements the backend for EEH core to retrieve next EEH error to handle. For the informational errors, we won't bother the EEH core. Otherwise, the EEH should take appropriate actions depending on the return value: 0 - No further errors detected 1 - Frozen PE 2 - Fenced PHB 3 - Dead PHB 4 - Dead IOC Signed-off-by:
-
Gavin Shan authored
The patch adds backends to retrieve error log and configure p2p bridges for the indicated PE. Signed-off-by:
-
Gavin Shan authored
The patch adds the I/O chip backend to do PE reset. For now, we focus on PCI bus dependent PE. If PHB PE has been put into error state, the PHB will take complete reset. Besides, the root bridge will take fundamental or hot reset accordingly if the indicated PE locates at the toppest of PCI hierarchy tree. Otherwise, the upstream p2p bridge will take hot reset. Signed-off-by:
-
Gavin Shan authored
The patch adds I/O chip backend to retrieve the state for the indicated PE. While the PE state is temperarily unavailable, the upper layer (powernv platform) should return default delay (1 second). Signed-off-by:
-
Gavin Shan authored
The patch adds the backend to enable or disable EEH functionality for the specified PE. The backend is also used to enable MMIO or DMA path for the problematic PE. It's notable that all PEs on PowerNV platform support EEH functionality by default, and we disallow to disable EEH for the specific PE. Signed-off-by:
-
Gavin Shan authored
The post initialization (struct eeh_ops::post_init) is called after the EEH probe is done. On the other hand, the EEH core post initialization is designed to call platform and then I/O chip backend on PowerNV platform. The patch adds the backend for I/O chip to notify the platform that the specific PHB is ready to supply EEH service. Signed-off-by:
-
Gavin Shan authored
For EEH on PowerNV platform, the overall architecture is different from that on pSeries platform. In order to support multiple I/O chips in future, we split EEH to 3 layers for PowerNV platform: EEH core, platform layer, I/O layer. It would give EEH implementation on PowerNV platform much more flexibility in future. The patch adds the EEH backend for P7IOC. Signed-off-by:
-
Gavin Shan authored
The patch synchronizes OPAL APIs between kernel and firmware. Also, we starts to replace opal_pci_get_phb_diag_data() with the similar opal_pci_get_phb_diag_data2() and the former OPAL API would return OPAL_UNSUPPORTED from now on. Signed-off-by:
-
Gavin Shan authored
On PowerNV platform, the EEH event caused by interrupt won't have binding PE. The patch enables EEH core to handle the special event. To avoid the current logic we have, The eeh_handle_event() is renamed to eeh_handle_normal_event(), and the eeh_handle_special_event() is introduced. The function eeh_handle_event() dispatches to above two functions according to the input parameter. Besides, new backend "next_error" added to eeh_ops and it's expected to have following return values: 4 - Dead IOC 3 - Dead PHB 2 - Fenced PHB 1 - Frozen PE 0 - No error found Signed-off-by: -
Gavin Shan authored
An EEH event is created and queued to the event queue for each ingress EEH error. When there're mutiple EEH errors, we need serialize the process to keep consistent PE state (flags). The spinlock "confirm_error_lock" was introduced for the purpose. We'll inject EEH event upon error reporting interrupts on PowerNV platform. So we export the spinlock for that to use for consistent PE state. Signed-off-by:
-
Gavin Shan authored
On PowerNV platform, we might run into the situation where subsequent events are duplicated events of former one, which is being processed. For the case, we need the function implemented by the patch to purge EEH events accordingly. Signed-off-by:
-
Gavin Shan authored
We're not expecting that one specific PE got frozen for over 5 times in last hour. Otherwise, the PE will be removed from the system upon newly coming EEH errors. The patch introduces time stamp to trace the first error on specific PE in last hour and function to update that accordingly. Besides, the time stamp is recovered during PE hotplug path as we did for frozen count. Signed-off-by:
-
