- 27 Mar, 2024 1 commit
-
-
Chuck Lever authored
There are one or two cases where CREATE_SESSION returns NFS4ERR_DELAY in order to force the client to wait a bit and try CREATE_SESSION again. However, after commit e4469c6c ("NFSD: Fix the NFSv4.1 CREATE_SESSION operation"), NFSD caches that response in the CREATE_SESSION slot. Thus, when the client resends the CREATE_SESSION, the server always returns the cached NFS4ERR_DELAY response rather than actually executing the request and properly recording its outcome. This blocks the client from making further progress. RFC 8881 Section 15.1.1.3 says: > If NFS4ERR_DELAY is returned on an operation other than SEQUENCE > that validly appears as the first operation of a request ... [t]he > request can be retried in full without modification. In this case > as well, the replier MUST avoid returning a response containing > NFS4ERR_DELAY as the response to an initial operation of a request > solely on the basis of its presence in the reply cache. Neither the original NFSD code nor the discussion in section 18.36.4 refer explicitly to this important requirement, so I missed it. Note also that not only must the server not cache NFS4ERR_DELAY, but it has to not advance the CREATE_SESSION slot sequence number so that it can properly recognize and accept the client's retry. Reported-by:
Dai Ngo <dai.ngo@oracle.com> Fixes: e4469c6c ("NFSD: Fix the NFSv4.1 CREATE_SESSION operation") Tested-by:
Chuck Lever <chuck.lever@oracle.com>
-
- 22 Mar, 2024 2 commits
-
-
Chuck Lever authored
Scott reports an occasional scatterlist BUG that is triggered by the RFC 8009 Kunit test, then says: > Looking through the git history of the auth_gss code, there are various > places where static buffers were replaced by dynamically allocated ones > because they're being used with scatterlists. Reported-by:
Scott Mayhew <smayhew@redhat.com> Fixes: 561141dd ("SUNRPC: Use a static buffer for the checksum initialization vector") Signed-off-by:
-
Jan Kara authored
Commit a8b00268 ("rename(): avoid a deadlock in the case of parents having no common ancestor") added an error bail out path. However this path does not drop the remount protection that has been acquired. Fix the cleanup path to properly drop the remount protection. Fixes: a8b00268 ("rename(): avoid a deadlock in the case of parents having no common ancestor") Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 09 Mar, 2024 1 commit
-
-
Chuck Lever authored
Replace open-coded encoding logic with the use of conventional XDR utility functions. Add a tracepoint to make replays observable in field troubleshooting situations. The WARN_ON is removed. A stack trace is of little use, as there is only one call site for nfsd4_encode_replay(), and a buffer length shortage here is unlikely. Signed-off-by:
-
- 05 Mar, 2024 2 commits
-
-
Dai Ngo authored
The NFS server should ask clients to voluntarily return unused delegations when the number of granted delegations reaches the max_delegations. This is so that the server can continue to grant delegations for new requests. Signed-off-by:
Chen Hanxiao <chenhx.fnst@fujitsu.com> Signed-off-by:
-
Chuck Lever authored
Add an explanation to prevent the future removal of the fill- attribute call sites in nfsd_setattr(). Some NFSv3 client implementations don't behave correctly if wcc data is not present in an NFSv3 SETATTR reply. Signed-off-by:
-
- 01 Mar, 2024 34 commits
-
-
Trond Myklebust authored
The main point of the guarded SETATTR is to prevent races with other WRITE and SETATTR calls. That requires that the check of the guard time against the inode ctime be done after taking the inode lock. Furthermore, we need to take into account the 32-bit nature of timestamps in NFSv3, and the possibility that files may change at a faster rate than once a second. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Trond Myklebust authored
Commit bb4d53d6 ("NFSD: use (un)lock_inode instead of fh_(un)lock for file operations") broke the NFSv3 pre/post op attributes behaviour when doing a SETATTR rpc call by stripping out the calls to fh_fill_pre_attrs() and fh_fill_post_attrs(). Fixes: bb4d53d6 ("NFSD: use (un)lock_inode instead of fh_(un)lock for file operations") Signed-off-by:
-
Dai Ngo authored
Add RCA4_TYPE_MASK_WDATA_DLG to ra_bmval bitmask of OP_CB_RECALL_ANY Signed-off-by:
-
Dai Ngo authored
If the GETATTR request on a file that has write delegation in effect and the request attributes include the change info and size attribute then the request is handled as below: Server sends CB_GETATTR to client to get the latest change info and file size. If these values are the same as the server's cached values then the GETATTR proceeds as normal. If either the change info or file size is different from the server's cached values, or the file was already marked as modified, then: . update time_modify and time_metadata into file's metadata with current time . encode GETATTR as normal except the file size is encoded with the value returned from CB_GETATTR . mark the file as modified If the CB_GETATTR fails for any reasons, the delegation is recalled and NFS4ERR_DELAY is returned for the GETATTR. Signed-off-by: -
Dai Ngo authored
Includes: . CB_GETATTR proc for nfs4_cb_procedures[] . XDR encoding and decoding function for CB_GETATTR request/reply . add nfs4_cb_fattr to nfs4_delegation for sending CB_GETATTR and store file attributes from client's reply. Signed-off-by: -
Chuck Lever authored
As described in RFC 8881 Section 18.36.4, CREATE_SESSION can be split into four phases. NFSD's implementation now does it like that description. Signed-off-by: -
Chuck Lever authored
RFC 8881 Section 18.36.4 discusses the implementation of the NFSv4.1 CREATE_SESSION operation. The section defines four phases of operation. Phase 2 processes the CREATE_SESSION sequence ID. As a separate step, Phase 3 evaluates the CREATE_SESSION arguments. The problem we are concerned with is when phase 2 is successful but phase 3 fails. The spec language in this case is "No changes are made to any client records on the server." RFC 8881 Section 18.35.4 defines a "client record", and it does /not/ contain any details related to the special CREATE_SESSION slot. Therefore NFSD is incorrect to skip incrementing the CREATE_SESSION sequence id when phase 3 (see Section 18.36.4) of CREATE_SESSION processing fails. In other words, even though NFSD happens to store the cs_slot in a client record, in terms of the protocol the slot is logically separate from the client record. Three complications: 1. The world has moved on since commit 86c3e16c ("nfsd4: confirm only on succesful create_session") broke this. So we can't simply revert that commit. 2. NFSD's CREATE_SESSION implementation does not cleanly delineate the logic of phases 2 and 3. So this won't be a surgical fix. 3. Because of the way it currently handles the CREATE_SESSION slot sequence number, nfsd4_create_session() isn't caching error responses in the CREATE_SESSION slot. Instead of replaying the response cache in those cases, it's executing the transaction again. Reorganize the CREATE_SESSION slot sequence number accounting. This requires that error responses are appropriately cached in the CREATE_SESSION slot (once it is found). Reported-by:
Connor Smith <connor.smith@hitachivantara.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218382Signed-off-by:
-
Chen Hanxiao authored
nfsd fault injection has been deprecated since commit 9d60d931 ("Deprecate nfsd fault injection") and removed by commit e56dc9e2 ("nfsd: remove fault injection code") So remove the outdated parts about fault injection. Signed-off-by:
-
Chuck Lever authored
Chain RDMA Writes that convey Write chunks onto the local Send chain. This means all WRs for an RPC Reply are now posted with a single ib_post_send() call, and there is a single Send completion when all of these are done. That reduces both the per-transport doorbell rate and completion rate. Signed-off-by: -
Chuck Lever authored
Refactor to eventually enable svcrdma to post the Write WRs for each RPC response using the same ib_post_send() as the Send WR (ie, as a single WR chain). svc_rdma_result_payload (originally svc_rdma_read_payload) was added so that the upper layer XDR encoder could identify a range of bytes to be possibly conveyed by RDMA (if a Write chunk was provided by the client). The purpose of commit f6ad7759 ("svcrdma: Post RDMA Writes while XDR encoding replies") was to post as much of the result payload outside of svc_rdma_sendto() as possible because svc_rdma_sendto() used to be called with the xpt_mutex held. However, since commit ca4faf54 ("SUNRPC: Move xpt_mutex into socket xpo_sendto methods"), the xpt_mutex is no longer held when calling svc_rdma_sendto(). Thus, that benefit is no longer an issue. Signed-off-by:
-
Chuck Lever authored
Reduce the doorbell and Send completion rates when sending RPC/RDMA replies that have Reply chunks. NFS READDIR procedures typically return their result in a Reply chunk, for example. Instead of calling ib_post_send() to post the Write WRs for the Reply chunk, and then calling it again to post the Send WR that conveys the transport header, chain the Write WRs to the Send WR and call ib_post_send() only once. Thanks to the Send Queue completion ordering rules, when the Send WR completes, that guarantees that Write WRs posted before it have also completed successfully. Thus all Write WRs for the Reply chunk can remain unsignaled. Instead of handling a Write completion and then a Send completion, only the Send completion is seen, and it handles clean up for both the Writes and the Send. Signed-off-by: -
Chuck Lever authored
Since the RPC transaction's svc_rdma_send_ctxt will stay around for the duration of the RDMA Write operation, the write_info structure for the Reply chunk can reside in the request's svc_rdma_send_ctxt instead of being allocated separately. Signed-off-by: -
Chuck Lever authored
Eventually I'd like the server to post the reply's Send WR along with any Write WRs using only a single call to ib_post_send(), in order to reduce the NIC's doorbell rate. To do this, add an anchor for a WR chain to svc_rdma_send_ctxt, and refactor svc_rdma_send() to post this WR chain to the Send Queue. For the moment, the posted chain will continue to contain a single Send WR. Signed-off-by: -
Chuck Lever authored
Don't call ib_post_send() at all if the transport is already shutting down. Signed-off-by: -
Chuck Lever authored
In some error flow cases, svc_rdma_wc_send() releases @ctxt. Copy the sc_cid field in @ctxt to a stack variable in order to guarantee that the value is available after the ib_post_send() call. In case the new comment looks a little strange, this will be done with at least one more field in a subsequent patch. Signed-off-by: -
Chuck Lever authored
Ensure there is a wake-up when increasing sc_sq_avail. Likewise, if a wake-up is done, sc_sq_avail needs to be updated, otherwise the wait_event() conditional is never going to be met. Signed-off-by: -
Chuck Lever authored
rdma_rw_mr_factor() returns the smallest number of MRs needed to move a particular number of pages. svcrdma currently asks for the number of MRs needed to move RPCSVC_MAXPAGES (a little over one megabyte), as that is the number of pages in the largest r/wsize the server supports. This call assumes that the client's NIC can bundle a full one megabyte payload in a single rdma_segment. In fact, most NICs cannot handle a full megabyte with a single rkey / rdma_segment. Clients will typically split even a single Read chunk into many segments. The server needs one MR to read each rdma_segment in a Read chunk, and thus each one needs an rw_ctx. svcrdma has been vastly underestimating the number of rw_ctxs needed to handle 64 RPC requests with large Read chunks using small rdma_segments. Unfortunately there doesn't seem to be a good way to estimate this number without knowing the client NIC's capabilities. Even then, the client RPC/RDMA implementation is still free to split a chunk into smaller segments (for example, it might be using physical registration, which needs an rdma_segment per page). The best we can do for now is choose a number that will guarantee forward progress in the worst case (one page per segment). At some later point, we could add some mechanisms to make this much less of a problem: - Add a core API to add more rw_ctxs to an already-established QP - svcrdma could treat rw_ctx exhaustion as a temporary error and try again - Limit the number of Reads in flight Signed-off-by: -
Chuck Lever authored
rdma_create_qp() can modify cap.max_send_sges. Copy the new value to the svcrdma transport so it is bound by the new limit instead of the requested one. Signed-off-by: -
Chuck Lever authored
Check that svc_rdma_accept() is allocating an appropriate number of CQEs. Signed-off-by: -
Chuck Lever authored
Do as other ULPs already do: ensure there is an extra Receive WQE reserved for the tear-down drain WR. I haven't heard reports of problems but it can't hurt. Note that rq_depth is used to compute the Send Queue depth as well, so this fix should affect both the SQ and RQ. Signed-off-by: -
Jeff Layton authored
Alex helps co-maintain the DLM code and did some recent work to fix up how lockd and GFS2 work together. Add him as a Reviewer for file locking changes. Acked-by:
Alexander Aring <aahringo@redhat.com> Acked-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Make the code cleaner and more readable. Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Signed-off-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. And change cache name from 'nfsd_drc' to 'nfsd_cacherep'. Signed-off-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Signed-off-by:
-
Kunwu Chan authored
commit 0a31bd5f ("KMEM_CACHE(): simplify slab cache creation") introduces a new macro. Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Signed-off-by:
-
NeilBrown authored
It is possible for free_blocked_lock() to be called twice concurrently, once from nfsd4_lock() and once from nfsd4_release_lockowner() calling remove_blocked_locks(). This is why a kref was added. It is perfectly safe for locks_delete_block() and kref_put() to be called in parallel as they use locking or atomicity respectively as protection. However locks_release_private() has no locking. It is safe for it to be called twice sequentially, but not concurrently. This patch moves that call from free_blocked_lock() where it could race with itself, to free_nbl() where it cannot. This will slightly delay the freeing of private info or release of the owner - but not by much. It is arguably more natural for this freeing to happen in free_nbl() where the structure itself is freed. This bug was found by code inspection - it has not been seen in practice. Fixes: 47446d74 ("nfsd4: add refcount for nfsd4_blocked_lock") Signed-off-by:
-
NeilBrown authored
When there is layout state on a filesystem that is being "unlocked" that is now revoked, which involves closing the nfsd_file and releasing the vfs lease. To avoid races, ->ls_file can now be accessed either: - under ->fi_lock for the state's sc_file or - under rcu_read_lock() if nfsd_file_get() is used. To support this, ->fence_client and nfsd4_cb_layout_fail() now take a second argument being the nfsd_file. Reviewed-by:
-
NeilBrown authored
Revoking state through 'unlock_filesystem' now revokes any delegation states found. When the stateids are then freed by the client, the revoked stateids will be cleaned up correctly. As there is already support for revoking delegations, we build on that for admin-revoking. Reviewed-by:
-
NeilBrown authored
Revoking state through 'unlock_filesystem' now revokes any open states found. When the stateids are then freed by the client, the revoked stateids will be cleaned up correctly. Possibly the related lock states should be revoked too, but a subsequent patch will do that for all lock state on the superblock. Reviewed-by:
-
NeilBrown authored
Revoking state through 'unlock_filesystem' now revokes any lock states found. When the stateids are then freed by the client, the revoked stateids will be cleaned up correctly. Reviewed-by:
-
NeilBrown authored
For NFSv4.1 and later the client easily discovers if there is any admin-revoked state and will then find and explicitly free it. For NFSv4.0 there is no such mechanism. The client can only find that state is admin-revoked if it tries to use that state, and there is no way for it to explicitly free the state. So the server must hold on to the stateid (at least) for an indefinite amount of time. A RELEASE_LOCKOWNER request might justify forgetting some of these stateids, as would the whole clients lease lapsing, but these are not reliable. This patch takes two approaches. Whenever a client uses an revoked stateid, that stateid is then discarded and will not be recognised again. This might confuse a client which expect to get NFS4ERR_ADMIN_REVOKED consistently once it get it at all, but should mostly work. Hopefully one error will lead to other resources being closed (e.g. process exits), which will result in more stateid being freed when a CLOSE attempt gets NFS4ERR_ADMIN_REVOKED. Also, any admin-revoked stateids that have been that way for more than one lease time are periodically revoke. No actual freeing of state happens in this patch. That will come in future patches which handle the different sorts of revoked state. Reviewed-by:
-
NeilBrown authored
Add "admin-revoked" to the status information for any states that have been admin-revoked. This can be useful for confirming correct behaviour. Reviewed-by:
-
NeilBrown authored
Change the "show" functions to show some content even if a file cannot be found. This is the case for admin-revoked state. This is primarily useful for debugging - to ensure states are being removed eventually. So change several seq_printf() to seq_puts(). Some of these are needed to keep checkpatch happy. Others were done for consistency. Reviewed-by:
-
NeilBrown authored
The NFSv4 protocol allows state to be revoked by the admin and has error codes which allow this to be communicated to the client. This patch - introduces a new state-id status SC_STATUS_ADMIN_REVOKED which can be set on open, lock, or delegation state. - reports NFS4ERR_ADMIN_REVOKED when these are accessed - introduces a per-client counter of these states and returns SEQ4_STATUS_ADMIN_STATE_REVOKED when the counter is not zero. Decrements this when freeing any admin-revoked state. - introduces stub code to find all interesting states for a given superblock so they can be revoked via the 'unlock_filesystem' file in /proc/fs/nfsd/ No actual states are handled yet. Reviewed-by:
-
