- 29 Jan, 2014 4 commits
-
-
Jianguo Wu authored
commit a49ecbcd upstream. After a successful hugetlb page migration by soft offline, the source page will either be freed into hugepage_freelists or buddy(over-commit page). If page is in buddy, page_hstate(page) will be NULL. It will hit a NULL pointer dereference in dequeue_hwpoisoned_huge_page(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff81163761>] dequeue_hwpoisoned_huge_page+0x131/0x1d0 PGD c23762067 PUD c24be2067 PMD 0 Oops: 0000 [#1] SMP So check PageHuge(page) after call migrate_pages() successfully. [wujg: backport to 3.4: - adjust context - s/num_poisoned_pages/mce_bad_pages/] Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Tested-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Richter authored
commit bee09ed9 upstream. On AMD family 10h we see following error messages while waking up from S3 for all non-boot CPUs leading to a failed IBS initialization: Enabling non-boot CPUs ... smpboot: Booting Node 0 Processor 1 APIC 0x1 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu perf: IBS APIC setup failed on cpu #1 process: Switch to broadcast mode on CPU1 CPU1 is up ... ACPI: Waking up from system sleep state S3 Reason for this is that during suspend the LVT offset for the IBS vector gets lost and needs to be reinialized while resuming. The offset is read from the IBSCTL msr. On family 10h the offset needs to be 1 as offset 0 is used for the MCE threshold interrupt, but firmware assings it for IBS to 0 too. The kernel needs to reprogram the vector. The msr is a readonly node msr, but a new value can be written via pci config space access. The reinitialization is implemented for family 10h in setup_ibs_ctl() which is forced during IBS setup. This patch fixes IBS setup after waking up from S3 by adding resume/supend hooks for the boot cpu which does the offset reinitialization. Marking it as stable to let distros pick up this fix. Signed-off-by:
Robert Richter <rric@kernel.org> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1389797849-5565-1-git-send-email-rric.net@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ian Abbott authored
commit 0283f7a1 upstream. At some point, Measurement Computing / ComputerBoards redesigned the PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip. This meant they had to put their hardware registers in the PCI BAR 2 region instead of PCI BAR 1. Unfortunately, they kept the same PCI device ID for the new design. This means the driver recognizes the newer cards, but doesn't work (and is likely to screw up the local configuration registers of the PLX chip) because it's using the wrong region. Since the PCI subvendor and subdevice IDs were both zero on the old design, but are the same as the vendor and device on the new design, we can tell the old design and new design apart easily enough. Split the existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new entries, referenced by different entries in the PCI device ID table `pci_8255_pci_table[]`. Use the same board name for both entries. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Andy Honig authored
commit fda4e2e8 upstream. In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the potential to corrupt kernel memory if userspace provides an address that is at the end of a page. This patches concerts those functions to use kvm_write_guest_cached and kvm_read_guest_cached. It also checks the vapic_address specified by userspace during ioctl processing and returns an error to userspace if the address is not a valid GPA. This is generally not guest triggerable, because the required write is done by firmware that runs before the guest. Also, it only affects AMD processors and oldish Intel that do not have the FlexPriority feature (unless you disable FlexPriority, of course; then newer processors are also affected). Fixes: b93463aa ('KVM: Accelerated apic support') Reported-by:
Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [ lizf: backported to 3.4: based on Paolo's backport hints for <3.10 ] Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
- 15 Jan, 2014 28 commits
-
-
Greg Kroah-Hartman authored
-
Paul Turner authored
commit 0ac9b1c2 upstream. Currently, group entity load-weights are initialized to zero. This admits some races with respect to the first time they are re-weighted in earlty use. ( Let g[x] denote the se for "g" on cpu "x". ) Suppose that we have root->a and that a enters a throttled state, immediately followed by a[0]->t1 (the only task running on cpu[0]) blocking: put_prev_task(group_cfs_rq(a[0]), t1) put_prev_entity(..., t1) check_cfs_rq_runtime(group_cfs_rq(a[0])) throttle_cfs_rq(group_cfs_rq(a[0])) Then, before unthrottling occurs, let a[0]->b[0]->t2 wake for the first time: enqueue_task_fair(rq[0], t2) enqueue_entity(group_cfs_rq(b[0]), t2) enqueue_entity_load_avg(group_cfs_rq(b[0]), t2) account_entity_enqueue(group_cfs_ra(b[0]), t2) update_cfs_shares(group_cfs_rq(b[0])) < skipped because b is part of a throttled hierarchy > enqueue_entity(group_cfs_rq(a[0]), b[0]) ... We now have b[0] enqueued, yet group_cfs_rq(a[0])->load.weight == 0 which violates invariants in several code-paths. Eliminate the possibility of this by initializing group entity weight. Signed-off-by:
Paul Turner <pjt@google.com> Signed-off-by:
-
Ben Segall authored
commit 927b54fc upstream. __start_cfs_bandwidth calls hrtimer_cancel while holding rq->lock, waiting for the hrtimer to finish. However, if sched_cfs_period_timer runs for another loop iteration, the hrtimer can attempt to take rq->lock, resulting in deadlock. Fix this by ensuring that cfs_b->timer_active is cleared only if the _latest_ call to do_sched_cfs_period_timer is returning as idle. Then __start_cfs_bandwidth can just call hrtimer_try_to_cancel and wait for that to succeed or timer_active == 1. Signed-off-by:
Ben Segall <bsegall@google.com> Signed-off-by:
-
Ben Segall authored
commit db06e78c upstream. hrtimer_expires_remaining does not take internal hrtimer locks and thus must be guarded against concurrent __hrtimer_start_range_ns (but returning HRTIMER_RESTART is safe). Use cfs_b->lock to make it safe. Signed-off-by:
-
Ben Segall authored
commit 1ee14e6c upstream. When we transition cfs_bandwidth_used to false, any currently throttled groups will incorrectly return false from cfs_rq_throttled. While tg_set_cfs_bandwidth will unthrottle them eventually, currently running code (including at least dequeue_task_fair and distribute_cfs_runtime) will cause errors. Fix this by turning off cfs_bandwidth_used only after unthrottling all cfs_rqs. Tested: toggle bandwidth back and forth on a loaded cgroup. Caused crashes in minutes without the patch, hasn't crashed with it. Signed-off-by:
-
Linus Torvalds authored
commit 26bef131 upstream. Before we do an EMMS in the AMD FXSAVE information leak workaround we need to clear any pending exceptions, otherwise we trap with a floating-point exception inside this code. Reported-by:
halfdog <me@halfdog.net> Tested-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.comSigned-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Laurent Pinchart authored
commit b6328a6b upstream. Commit 4dcfa600 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Russell King authored
commit 29c350bf upstream. The array was missing the final entry for the undefined instruction exception handler; this commit adds it. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Curt Brune authored
[ Upstream commit fe0d692b ] br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by:
Curt Brune <curt@cumulusnetworks.com> Signed-off-by:
Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4d231b76 ] While commit 30a584d9 fixes datagram interface in LLC, a use after free bug has been introduced for SOCK_STREAM sockets that do not make use of MSG_PEEK. The flow is as follow ... if (!(flags & MSG_PEEK)) { ... sk_eat_skb(sk, skb, false); ... } ... if (used + offset < skb->len) continue; ... where sk_eat_skb() calls __kfree_skb(). Therefore, cache original length and work on skb_len to check partial reads. Fixes: 30a584d9 ("[LLX]: SOCK_DGRAM interface fixes") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 2205369a ] When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit f81152e3 ] recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen. After commit f3d33426 (net: rework recvmsg handler msg_name and msg_namelen logic), we now always take the else branch due to namelen being initialized to 0. Digging in netdev-vger-cvs git repo shows that msg_namelen was initialized with a fixed-size since at least 1995, so the else branch was never taken. Compile tested only. Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit c2349758 ] Binding might result in a NULL device, which is dereferenced causing this BUG: [ 1317.260548] BUG: unable to handle kernel NULL pointer dereference at 000000000000097 4 [ 1317.261847] IP: [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.263315] PGD 418bcb067 PUD 3ceb21067 PMD 0 [ 1317.263502] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 1317.264179] Dumping ftrace buffer: [ 1317.264774] (ftrace buffer empty) [ 1317.265220] Modules linked in: [ 1317.265824] CPU: 4 PID: 836 Comm: trinity-child46 Tainted: G W 3.13.0-rc4- next-20131218-sasha-00013-g2cebb9b-dirty #4159 [ 1317.267415] task: ffff8803ddf33000 ti: ffff8803cd31a000 task.ti: ffff8803cd31a000 [ 1317.268399] RIP: 0010:[<ffffffff84225f52>] [<ffffffff84225f52>] rds_ib_laddr_check+ 0x82/0x110 [ 1317.269670] RSP: 0000:ffff8803cd31bdf8 EFLAGS: 00010246 [ 1317.270230] RAX: 0000000000000000 RBX: ffff88020b0dd388 RCX: 0000000000000000 [ 1317.270230] RDX: ffffffff8439822e RSI: 00000000000c000a RDI: 0000000000000286 [ 1317.270230] RBP: ffff8803cd31be38 R08: 0000000000000000 R09: 0000000000000000 [ 1317.270230] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 1317.270230] R13: 0000000054086700 R14: 0000000000a25de0 R15: 0000000000000031 [ 1317.270230] FS: 00007ff40251d700(0000) GS:ffff88022e200000(0000) knlGS:000000000000 0000 [ 1317.270230] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1317.270230] CR2: 0000000000000974 CR3: 00000003cd478000 CR4: 00000000000006e0 [ 1317.270230] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1317.270230] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 [ 1317.270230] Stack: [ 1317.270230] 0000000054086700 5408670000a25de0 5408670000000002 0000000000000000 [ 1317.270230] ffffffff84223542 00000000ea54c767 0000000000000000 ffffffff86d26160 [ 1317.270230] ffff8803cd31be68 ffffffff84223556 ffff8803cd31beb8 ffff8800c6765280 [ 1317.270230] Call Trace: [ 1317.270230] [<ffffffff84223542>] ? rds_trans_get_preferred+0x42/0xa0 [ 1317.270230] [<ffffffff84223556>] rds_trans_get_preferred+0x56/0xa0 [ 1317.270230] [<ffffffff8421c9c3>] rds_bind+0x73/0xf0 [ 1317.270230] [<ffffffff83e4ce62>] SYSC_bind+0x92/0xf0 [ 1317.270230] [<ffffffff812493f8>] ? context_tracking_user_exit+0xb8/0x1d0 [ 1317.270230] [<ffffffff8119313d>] ? trace_hardirqs_on+0xd/0x10 [ 1317.270230] [<ffffffff8107a852>] ? syscall_trace_enter+0x32/0x290 [ 1317.270230] [<ffffffff83e4cece>] SyS_bind+0xe/0x10 [ 1317.270230] [<ffffffff843a6ad0>] tracesys+0xdd/0xe2 [ 1317.270230] Code: 00 8b 45 cc 48 8d 75 d0 48 c7 45 d8 00 00 00 00 66 c7 45 d0 02 00 89 45 d4 48 89 df e8 78 49 76 ff 41 89 c4 85 c0 75 0c 48 8b 03 <80> b8 74 09 00 00 01 7 4 06 41 bc 9d ff ff ff f6 05 2a b6 c2 02 [ 1317.270230] RIP [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.270230] RSP <ffff8803cd31bdf8> [ 1317.270230] CR2: 0000000000000974 Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Salva Peiró authored
[ Upstream commit 8e3fbf87 ] The yam_ioctl() code fails to initialise the cmd field of the struct yamdrv_ioctl_cfg. Add an explicit memset(0) before filling the structure to avoid the 4-byte info leak. Signed-off-by:
Salva Peiró <speiro@ai2.upv.es> Signed-off-by:
-
Wenliang Fan authored
[ Upstream commit e9db5c21 ] The local variable 'bi' comes from userspace. If userspace passed a large number to 'bi.data.calibrate', there would be an integer overflow in the following line: s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16; Signed-off-by:
Wenliang Fan <fanwlexca@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit b1aac815 ] Jakub reported while working with nlmon netlink sniffer that parts of the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6. That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3]. In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab] memory through this. At least, in udp_dump_one(), we allocate a skb in ... rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL); ... and then pass that to inet_sk_diag_fill() that puts the whole struct inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0], r->id.idiag_dst[0] and leave the rest untouched: r->id.idiag_src[0] = inet->inet_rcv_saddr; r->id.idiag_dst[0] = inet->inet_daddr; struct inet_diag_msg embeds struct inet_diag_sockid that is correctly / fully filled out in IPv6 case, but for IPv4 not. So just zero them out by using plain memset (for this little amount of bytes it's probably not worth the extra check for idiag_family == AF_INET). Similarly, fix also other places where we fill that out. Reported-by:
Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 37ab4fa7 ] This is similar to the set_peek_off patch where calling bind while the socket is stuck in unix_dgram_recvmsg() will block and cause a hung task spew after a while. This is also the last place that did a straightforward mutex_lock(), so there shouldn't be any more of these patches. Signed-off-by:
-
Jason Wang authored
[ Upstream commit 50dc875f ] There's a possible deadlock if we flush the peers notifying work during setting mtu: [ 22.991149] ====================================================== [ 22.991173] [ INFO: possible circular locking dependency detected ] [ 22.991198] 3.10.0-54.0.1.el7.x86_64.debug #1 Not tainted [ 22.991219] ------------------------------------------------------- [ 22.991243] ip/974 is trying to acquire lock: [ 22.991261] ((&(&net_device_ctx->dwork)->work)){+.+.+.}, at: [<ffffffff8108af95>] flush_work+0x5/0x2e0 [ 22.991307] but task is already holding lock: [ 22.991330] (rtnl_mutex){+.+.+.}, at: [<ffffffff81539deb>] rtnetlink_rcv+0x1b/0x40 [ 22.991367] which lock already depends on the new lock. [ 22.991398] the existing dependency chain (in reverse order) is: [ 22.991426] -> #1 (rtnl_mutex){+.+.+.}: [ 22.991449] [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260 [ 22.991477] [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0 [ 22.991501] [<ffffffff81673659>] mutex_lock_nested+0x89/0x4f0 [ 22.991529] [<ffffffff815392b7>] rtnl_lock+0x17/0x20 [ 22.991552] [<ffffffff815230b2>] netdev_notify_peers+0x12/0x30 [ 22.991579] [<ffffffffa0340212>] netvsc_send_garp+0x22/0x30 [hv_netvsc] [ 22.991610] [<ffffffff8108d251>] process_one_work+0x211/0x6e0 [ 22.991637] [<ffffffff8108d83b>] worker_thread+0x11b/0x3a0 [ 22.991663] [<ffffffff81095e5d>] kthread+0xed/0x100 [ 22.991686] [<ffffffff81681c6c>] ret_from_fork+0x7c/0xb0 [ 22.991715] -> #0 ((&(&net_device_ctx->dwork)->work)){+.+.+.}: [ 22.991715] [<ffffffff810de817>] check_prevs_add+0x967/0x970 [ 22.991715] [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260 [ 22.991715] [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0 [ 22.991715] [<ffffffff8108afde>] flush_work+0x4e/0x2e0 [ 22.991715] [<ffffffff8108e1b5>] __cancel_work_timer+0x95/0x130 [ 22.991715] [<ffffffff8108e303>] cancel_delayed_work_sync+0x13/0x20 [ 22.991715] [<ffffffffa03404e4>] netvsc_change_mtu+0x84/0x200 [hv_netvsc] [ 22.991715] [<ffffffff815233d4>] dev_set_mtu+0x34/0x80 [ 22.991715] [<ffffffff8153bc2a>] do_setlink+0x23a/0xa00 [ 22.991715] [<ffffffff8153d054>] rtnl_newlink+0x394/0x5e0 [ 22.991715] [<ffffffff81539eac>] rtnetlink_rcv_msg+0x9c/0x260 [ 22.991715] [<ffffffff8155cdd9>] netlink_rcv_skb+0xa9/0xc0 [ 22.991715] [<ffffffff81539dfa>] rtnetlink_rcv+0x2a/0x40 [ 22.991715] [<ffffffff8155c41d>] netlink_unicast+0xdd/0x190 [ 22.991715] [<ffffffff8155c807>] netlink_sendmsg+0x337/0x750 [ 22.991715] [<ffffffff8150d219>] sock_sendmsg+0x99/0xd0 [ 22.991715] [<ffffffff8150d63e>] ___sys_sendmsg+0x39e/0x3b0 [ 22.991715] [<ffffffff8150eba2>] __sys_sendmsg+0x42/0x80 [ 22.991715] [<ffffffff8150ebf2>] SyS_sendmsg+0x12/0x20 [ 22.991715] [<ffffffff81681d19>] system_call_fastpath+0x16/0x1b This is because we hold the rtnl_lock() before ndo_change_mtu() and try to flush the work in netvsc_change_mtu(), in the mean time, netdev_notify_peers() may be called from worker and also trying to hold the rtnl_lock. This will lead the flush won't succeed forever. Solve this by not canceling and flushing the work, this is safe because the transmission done by NETDEV_NOTIFY_PEERS was synchronized with the netif_tx_disable() called by netvsc_change_mtu(). Reported-by:
Yaju Cao <yacao@redhat.com> Tested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Nat Gurumoorthy authored
[ Upstream commit 388d3335 ] The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by:
Nat Gurumoorthy <natg@google.com> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 12663bfc ] unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Changli Gao authored
[ Upstream commit d323e92c ] maxattr in genl_family should be used to save the max attribute type, but not the max command type. Drop monitor doesn't support any attributes, so we should leave it as zero. Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit a3300ef4 ] Brett Ciphery reported that new ipv6 addresses failed to get installed because the addrconf generated dsts where counted against the dst gc limit. We don't need to count those routes like we currently don't count administratively added routes. Because the max_addresses check enforces a limit on unbounded address generation first in case someone plays with router advertisments, we are still safe here. Reported-by:
Brett Ciphery <brett.ciphery@windriver.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit ce232ce0 ] macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the trunca checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Zhi Yong Wu authored
[ Upstream commit d0b7da8a ] Signed-off-by:
Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by:
-
Zhi Yong Wu authored
[ Upstream commit e6ebc7f1 ] Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 006da7b0 ] Currently macvlan will count received packets after calling each vlans receive handler. Macvtap attempts to count the packet yet again when the user reads the packet from the tap socket. This code doesn't do this consistently either. Remove the counting from macvtap and let only macvlan count received packets. Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Acked-by:
-
Venkat Venkatsubra authored
[ Upstream commit 18fc25c9 ] After congestion update on a local connection, when rds_ib_xmit returns less bytes than that are there in the message, rds_send_xmit calls back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE) to trigger. For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually the message contains 8240 bytes. rds_send_xmit thinks there is more to send and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header) =4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k]. The commit 6094628b "rds: prevent BUG_ON triggering on congestion map updates" introduced this regression. That change was addressing the triggering of a different BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE: BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); This was the sequence it was going through: (rds_ib_xmit) /* Do not send cong updates to IB loopback */ if (conn->c_loopback && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) { rds_cong_map_updated(conn->c_fcong, ~(u64) 0); return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES; } rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time) = 8192 c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again and so on (c_xmit_data_off 24672,32912,41152,49392,57632) rds_ib_xmit returns 8240 On this iteration this sequence causes the BUG_ON in rds_send_xmit: while (ret) { tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off); [tmp = 65536 - 57632 = 7904] conn->c_xmit_data_off += tmp; [c_xmit_data_off = 57632 + 7904 = 65536] ret -= tmp; [ret = 8240 - 7904 = 336] if (conn->c_xmit_data_off == sg->length) { conn->c_xmit_data_off = 0; sg++; conn->c_xmit_sg++; BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); [c_xmit_sg = 1, rm->data.op_nents = 1] What the current fix does: Since the congestion update over loopback is not actually transmitted as a message, all that rds_ib_xmit needs to do is let the caller think the full message has been transmitted and not return partial bytes. It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb. And 64Kb+48 when page size is 64Kb. Reported-by:
Josh Hunt <joshhunt00@gmail.com> Tested-by:
Honggang Li <honli@redhat.com> Acked-by:
Bang Nguyen <bang.nguyen@oracle.com> Signed-off-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 28e24c62 ] Few network drivers really supports frag_list : virtual drivers. Some drivers wrongly advertise NETIF_F_FRAGLIST feature. If skb with a frag_list is given to them, packet on the wire will be corrupt. Remove this flag, as core networking stack will make sure to provide packets that can be sent without corruption. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by:
-
- 08 Jan, 2014 8 commits
-
-
Greg Kroah-Hartman authored
-
Jean Delvare authored
commit 33a7ab91 upstream. The W83L786NG stores the fan speed on 4 bits while the sysfs interface uses a 0-255 range. Thus the driver should scale the user input down to map it to the device range, and scale up the value read from the device before presenting it to the user. The reserved register nibble should be left unchanged. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Paul Moore authored
commit c0828e50 upstream. Due to difficulty in arriving at the proper security label for TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets while/before they are undergoing XFRM transforms instead of waiting until afterwards so that we can determine the correct security label. Reported-by:
Janak Desai <Janak.Desai@gtri.gatech.edu> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Paul Moore authored
commit 817eff71 upstream. Previously selinux_skb_peerlbl_sid() would only check for labeled IPsec security labels on inbound packets, this patch enables it to check both inbound and outbound traffic for labeled IPsec security labels. Reported-by:
-
Geert Uytterhoeven authored
commit 84ed8a99 upstream. E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m: ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined! For "lib-y", if no symbols in a compilation unit are referenced by other units, the compilation unit will not be included in vmlinux. This breaks modules that do reference those symbols. Use "obj-y" instead to fix this. http://kisskb.ellerman.id.au/kisskb/buildresult/8838077/ This doesn't fix all cases. There are others, e.g. udivsi3. This is also not limited to sh, many architectures handle this in the same way. A simple solution is to unconditionally include all helper functions. A more complex solution is to make the choice of "lib-y" or "obj-y" depend on CONFIG_MODULES: obj-$(CONFIG_MODULES) += ... lib-y($CONFIG_MODULES) += ... Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mundt <lethal@linux-sh.org> Tested-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by:
-
Ben Segall authored
commit f9f9ffc2 upstream. throttle_cfs_rq() doesn't check to make sure that period_timer is running, and while update_curr/assign_cfs_runtime does, a concurrently running period_timer on another cpu could cancel itself between this cpu's update_curr and throttle_cfs_rq(). If there are no other cfs_rqs running in the tg to restart the timer, this causes the cfs_rq to be stranded forever. Fix this by calling __start_cfs_bandwidth() in throttle if the timer is inactive. (Also add some sched_debug lines for cfs_bandwidth.) Tested: make a run/sleep task in a cgroup, loop switching the cgroup between 1ms/100ms quota and unlimited, checking for timer_active=0 and throttled=1 as a failure. With the throttle_cfs_rq() change commented out this fails, with the full patch it passes. Signed-off-by:
Chris J Arges <chris.j.arges@canonical.com> Signed-off-by:
-
Stephen Boyd authored
commit 4cc629b7 upstream. We should be writing bits here but instead we're writing the numbers that correspond to the bits we want to write. Fix it by wrapping the numbers in the BIT() macro. This fixes gpios acting as interrupts. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Theodore Ts'o authored
commit f6c07cad upstream. If a handle runs out of space, we currently stop the kernel with a BUG in jbd2_journal_dirty_metadata(). This makes it hard to figure out what might be going on. So return an error of ENOSPC, so we can let the file system layer figure out what is going on, to make it more likely we can get useful debugging information). This should make it easier to debug problems such as the one which was reported by: https://bugzilla.kernel.org/show_bug.cgi?id=44731 The only two callers of this function are ext4_handle_dirty_metadata() and ocfs2_journal_dirty(). The ocfs2 function will trigger a BUG_ON(), which means there will be no change in behavior. The ext4 function will call ext4_error_inode() which will print the useful debugging information and then handle the situation using ext4's error handling mechanisms (i.e., which might mean halting the kernel or remounting the file system read-only). Also, since both file systems already call WARN_ON(), drop the WARN_ON from jbd2_journal_dirty_metadata() to avoid two stack traces from being displayed. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: ocfs2-devel@oss.oracle.com Acked-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
