- 21 Nov, 2010 1 commit
-
-
Don Skidmore authored
This will reflect addition of new X540 hardware Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 Nov, 2010 11 commits
-
-
Shreyas Bhatewara authored
Add multiqueue support to vmxnet3 driver This change adds multiqueue and thus receive side scaling support to vmxnet3 device driver. Number of rx queues is limited to 1 in cases where MSI is not configured or one MSIx vector is not available per rx queue Signed-off-by:
Shreyas Bhatewara <sbhatewara@vmware.com> Reviewed-by:
Bhavesh Davda <bhavesh@vmware.com> Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/bonding/bond_main.c net/core/net-sysfs.c net/ipv6/addrconf.c
-
andrew hendry authored
Routing doesn't use the socket data and is protected by x25_route_list_lock Signed-off-by:
Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by:
-
andrew hendry authored
Signed-off-by:
-
andrew hendry authored
Signed-off-by:
-
andrew hendry authored
Push down the bkl in the ioctls so they can be removed one at a time. Signed-off-by:
-
Eric Dumazet authored
At compile time, we can replace the DIV_K instruction (divide by a constant value) by a reciprocal divide. At exec time, the expensive divide is replaced by a multiply, a less expensive operation on most processors. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Starting the translated instruction to 1 instead of 0 allows us to remove one descrement at check time and makes codes[] array init cleaner. Signed-off-by:
-
Eric Dumazet authored
Remove pc variable to avoid arithmetic to compute fentry at each filter instruction. Jumps directly manipulate fentry pointer. As the last instruction of filter[] is guaranteed to be a RETURN, and all jumps are before the last instruction, we dont need to check filter bounds (number of instructions in filter array) at each iteration, so we remove it from sk_run_filter() params. On x86_32 remove f_k var introduced in commit 57fe93b3 (filter: make sure filters dont read uninitialized memory) Note : We could use a CONFIG_ARCH_HAS_{FEW|MANY}_REGISTERS in order to avoid too many ifdefs in this code. This helps compiler to use cpu registers to hold fentry and A accumulator. On x86_32, this saves 401 bytes, and more important, sk_run_filter() runs much faster because less register pressure (One less conditional branch per BPF instruction) # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 2948 0 0 2948 b84 net/core/filter.o 3349 0 0 3349 d15 net/core/filter_pre.o on x86_64 : # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 5173 0 0 5173 1435 net/core/filter.o 5224 0 0 5224 1468 net/core/filter_pre.o Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning for sk_filter_rcu_release(): Warning(net/core/filter.c:586): missing initial short description on line: * sk_filter_rcu_release: Release a socket filter by rcu_head Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
Sarveshwar Bandi authored
Since interrupts are enabled only when open is called on the interface, Attempting a firmware update operation when interface is down could lead to partial success or failure of operation. This fix fails the request if netif_running is false. Signed-off-by:
Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com> Signed-off-by:
-
- 18 Nov, 2010 23 commits
-
-
Patrick McHardy authored
When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols. Therefore IP_VS can't be linked statically when conntrack is built modular. Reported-by:
Justin P. Mattock <justinmattock@gmail.com> Tested-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Wolfram Sang authored
irttp_data_request() returns meaningful errorcodes, while irttp_udata_request() just returns -1 in similar situations. Sync the two and the loglevels of the accompanying output. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Thomas Graf authored
Expose reachable and retrans timer values in msecs instead of jiffies. Both timer values are already exposed as msecs in the neighbour table netlink interface. The creation timestamp format with increased precision is kept but cleaned up. Signed-off-by:
Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Tomoya authored
Replace bit assignment value to BIT(X). For easy to readable/identifiable, replace all bit assigned macros to BIT(X) Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Tomoya authored
For easy to readable/identifiable, add prefix "PCH_" to all of #define macros. Signed-off-by:
-
-
David S. Miller authored
GCC (rightfully) complains that: drivers/atm/fore200e.c:614:5: warning: operation on 'cmdq->head' may be undefined This is due to the FORE200E_NEXT_ENTRY macro, which essentially evaluates to: i = ++i % m Make it what's explicitly intended here which is: i = (i + 1) % m and the warning goes away. Signed-off-by: -
Thomas Graf authored
IFLA_PROTINFO exposes timer related per device settings in jiffies. Change it to expose these values in msecs like the sysctl interface does. I did not find any users of IFLA_PROTINFO which rely on any of these values and even if there are, they are likely already broken because there is no way for them to reliably convert such a value to another time format. Signed-off-by:
-
Eric Dumazet authored
IGMP allocates MTU sized skbs. This may fail for large MTU (order-2 allocations), so add a fallback to try lower sizes. Signed-off-by:
-
Changli Gao authored
BPF_S_* are used internally, should not be exposed to the others. Signed-off-by:
Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by:
-
Tetsuo Handa authored
Since repeating u16 value to u8 value conversion using switch() clause's case statement is wasteful, this patch introduces u16 to u8 mapping table and removes most of case statements. As a result, the size of net/core/filter.o is reduced by about 29% on x86. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
-
Namhyung Kim authored
VORTEX_PCI() could return NULL so it needs to be casted before accessing any member of struct pci_dev. This fixes following build failure. Likewise VORTEX_EISA() was changed also. CC [M] drivers/net/3c59x.o drivers/net/3c59x.c: In function 'acpi_set_WOL': drivers/net/3c59x.c:3211:39: warning: dereferencing 'void *' pointer drivers/net/3c59x.c:3211:39: error: request for member 'current_state' in something not a structure or union make[3]: *** [drivers/net/3c59x.o] Error 1 make[2]: *** [drivers/net/3c59x.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Signed-off-by:
-
Ken Kawasaki authored
ipg.c: The id [SUNDANCE, 0x1021] (=[0x13f0, 0x1021]) is defined at dl2k.h and ipg.c. But this device works better with dl2k driver. This problem is similar with the commit [25cca535 ipg: Remove device claimed by dl2k from pci id table] at 11 Feb 2010. Signed-off-by:
Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by:
-
John Fastabend authored
Add option to set skb priority to pktgen. Useful for testing QOS features. Also by running pktgen on the vlan device the qdisc on the real device can be tested. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
-
Vasiliy Kulikov authored
alloc_netdev() is not checked here for NULL return value. dev is check instead. It might lead to NULL dereference of ndev. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
-
Rajkumar Manoharan authored
Setting tid information in the TX header is required only for QoS frames. Not handling this case causes severe data loss with some APs. Cc: stable@kernel.org Signed-off-by:
Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
John Fastabend authored
netif_set_real_num_rx_queues() can decrement and increment the number of rx queues. For example ixgbe does this as features and offloads are toggled. Presumably this could also happen across down/up on most devices if the available resources changed (cpu offlined). The kobject needs to be zero'd in this case so that the state is not preserved across kobject_put()/kobject_init_and_add(). This resolves the following error report. ixgbe 0000:03:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX kobject (ffff880324b83210): tried to init an initialized object, something is seriously wrong. Pid: 1972, comm: lldpad Not tainted 2.6.37-rc18021qaz+ #169 Call Trace: [<ffffffff8121c940>] kobject_init+0x3a/0x83 [<ffffffff8121cf77>] kobject_init_and_add+0x23/0x57 [<ffffffff8107b800>] ? mark_lock+0x21/0x267 [<ffffffff813c6d11>] net_rx_queue_update_kobjects+0x63/0xc6 [<ffffffff813b5e0e>] netif_set_real_num_rx_queues+0x5f/0x78 [<ffffffffa0261d49>] ixgbe_set_num_queues+0x1c6/0x1ca [ixgbe] [<ffffffffa0262509>] ixgbe_init_interrupt_scheme+0x1e/0x79c [ixgbe] [<ffffffffa0274596>] ixgbe_dcbnl_set_state+0x167/0x189 [ixgbe] Signed-off-by:
-
Tetsuo Handa authored
jiffies is defined as "volatile". extern unsigned long volatile __jiffy_data jiffies; ACCESS_ONCE() uses "volatile". As a result, some compilers warn duplicate `volatile' for ACCESS_ONCE(jiffies). Signed-off-by:
-
Gerrit Renker authored
This fixes whitespace noise introduced in commit "dccp ccid-2: Algorithm to update buffer state", 5753fdfe, 14 Nov 2010. Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Eric Dumazet authored
Instead of iterating in_dev->mc_list from bonding driver, its better to call a helper function provided by igmp.c Details of implementation (locking) are private to igmp code. ip_mc_rejoin_group(struct ip_mc_list *im) becomes ip_mc_rejoin_groups(struct in_device *in_dev); Signed-off-by:
-
Giuseppe Cavallaro authored
Add STMMAC to the list of supported Ethernet drivers and myself as maintainer. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Eric Dumazet authored
RCU conversion in IGMP code done in net-next-2.6 raised a race in __bond_resend_igmp_join_requests(). It iterates in_dev->mc_list without appropriate protection (RTNL, or read_lock on in_dev->mc_list_lock). Another cpu might delete an entry while we use it and trigger a fault. Signed-off-by:
-
Mark Mentovai authored
This follows wireless-testing 9236d838 ("cfg80211: fix extension channel checks to initiate communication") and fixes accidental case fall-through. Without this fix, HT40 is entirely blocked. Signed-off-by:
Mark Mentovai <mark@moxienet.com> Cc: stable@kernel.org Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com Signed-off-by:
-
- 17 Nov, 2010 5 commits
-
-
Nicolas Kaiser authored
irq_of_parse_and_map() has an unsigned return type. Testing for a negative error value doesn't work here. Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
Vasiliy Kulikov authored
snprintf() returns number of bytes that were copied if there is no overflow. This code uses return value as number of copied bytes. Theoretically format string '%lu.%09lu %pI4:%u %pI4:%u %d %#x %#x %u %u %u %u\n' may be expanded up to 163 bytes. In reality tv.tv_sec is just few bytes instead of 20, 2 ports are just 5 bytes each instead of 10, length is 5 bytes instead of 10. The rest is an unstrusted input. Theoretically if tv_sec is big then copy_to_user() would overflow tbuf. tbuf was increased to fit in 163 bytes. snprintf() is used to follow return value semantic. Signed-off-by:
-
John Fastabend authored
netif_set_real_num_rx_queues() can decrement and increment the number of rx queues. For example ixgbe does this as features and offloads are toggled. Presumably this could also happen across down/up on most devices if the available resources changed (cpu offlined). The kobject needs to be zero'd in this case so that the state is not preserved across kobject_put()/kobject_init_and_add(). This resolves the following error report. ixgbe 0000:03:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX kobject (ffff880324b83210): tried to init an initialized object, something is seriously wrong. Pid: 1972, comm: lldpad Not tainted 2.6.37-rc18021qaz+ #169 Call Trace: [<ffffffff8121c940>] kobject_init+0x3a/0x83 [<ffffffff8121cf77>] kobject_init_and_add+0x23/0x57 [<ffffffff8107b800>] ? mark_lock+0x21/0x267 [<ffffffff813c6d11>] net_rx_queue_update_kobjects+0x63/0xc6 [<ffffffff813b5e0e>] netif_set_real_num_rx_queues+0x5f/0x78 [<ffffffffa0261d49>] ixgbe_set_num_queues+0x1c6/0x1ca [ixgbe] [<ffffffffa0262509>] ixgbe_init_interrupt_scheme+0x1e/0x79c [ixgbe] [<ffffffffa0274596>] ixgbe_dcbnl_set_state+0x167/0x189 [ixgbe] Signed-off-by:
-
Changli Gao authored
Use the macros defined for the members of flowi to clean the code up. Signed-off-by:
-
Philippe De Muyter authored
indentation for TSI108_ETH entry was too big. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
